Hanging
a jib from an overhead structure may
be the best way to put a workstation where
it’s needed. These kits free floor space and
allow for greater plant layout flexibility. Jibs
have steel WS50 booms in length shown.
Vertical columns include a heavy duty 3 ft.
(0.9m) safety chain at the top and safety plate
at the bottom to prevent boom from sliding off.
CEILING
MOUNTED JIB KIT
Includes 6 ft.(1.8m) swing boom, vertical column
with integral safety chain and safety plate, 3 U-bolts,
1 balancer trolley, 1 hose/cable trolley for festoon,
1 end stop and 1 end cap.
CEILING
MOUNTED COLUMNS
Do not include booms but do include safety plate and
integral safety chain.
BOOM
AND TROLLEY DETAILS
Sizes and configurations other than those shown may be
made-up by ordering individual components Kit numbers
listed assume typical 3/8" (9mm) I.D. hose with saddle
to handle O.D. range of 0.60"-0.94" (15-24mm). If
optional saddle with O.D. range of 0.31"-0.59"
(08-15mm) is desired, substitute "1" for "2"
as last digit
of model number. Example: WCS-060301.
CAUTION
Inverted
jibs and related equipment must be installed with adequate
safety features, such as a secondary Safety
Chain and a Plate which prevents boom from sliding off bottom
of column (included with each kit). Jib is designed
to support tool and items associated with tool operation only.
Jib must not be used to support anything over the
stated 50 lbs (22.5kg) weight limit. It is the installer’s
responsibility to provide required safety items to meet local
codes and to install each unit with maximum attention to safe
work practices.
Swing
Stops for 50 lb. Capacity Booms
Many people want the flexibility a swing boom provides but need
to limit
swing in one or both directions. Two boom stops are available.
One (below)
has manually positioned (screw-in) stops that limit swing to
15º, 30º, 45º,
or 60º in either direction. The other (left) has a spring
loaded stop that,
when pulled, allows the boom to swing freely throughout its
normal 180º
arc and, when released, lock it at the straight position or
every 15º in either
direction. Stops are easily installed on 50 lb. capacity swing
booms without
drilling or welding.
Manual
Swing Boom Stop: W5S-SK
Spring
Loaded Boom Lock: W5S-BMLK
HWS-FMK1
Kits for Mounting Fans
to Ceiling Columns
Kit
includes two U-Bolts and
13.50"w x 5.25"h Mounting
Plate. End-user drills holes for
fans. Column and fans are not
included.
Order Online
Click the button of the item you wish to purchase.
