Hanging a jib from an overhead structure may be the best way to put a workstation where it’s needed. These kits free floor space and allow for greater plant layout flexibility. Jibs have steel WS50 booms in length shown. Vertical columns include a heavy duty 3 ft. (0.9m) safety chain at the top and safety plate at the bottom to prevent boom from sliding off.
CEILING MOUNTED JIB KIT Includes 6 ft.(1.8m) swing boom, vertical column with integral safety chain and safety plate, 3 U-bolts, 1 balancer trolley, 1 hose/cable trolley for festoon, 1 end stop and 1 end cap.
CEILING MOUNTED COLUMNS Do not include booms but do include safety plate and integral safety chain.
BOOM AND TROLLEY DETAILS Sizes and configurations other than those shown may be made-up by ordering individual components Kit numbers listed assume typical 3/8" (9mm) I.D. hose with saddle to handle O.D. range of 0.60"-0.94" (15-24mm). If optional saddle with O.D. range of 0.31"-0.59" (08-15mm) is desired, substitute "1" for "2" as last digit of model number. Example: WCS-060301.
CAUTION
Inverted jibs and related equipment must be installed with adequate safety features, such as a secondary Safety Chain and a Plate which prevents boom from sliding off bottom of column (included with each kit). Jib is designed to support tool and items associated with tool operation only. Jib must not be used to support anything over the stated 50 lbs (22.5kg) weight limit. It is the installer’s responsibility to provide required safety items to meet local codes and to install each unit with maximum attention to safe work practices.
Swing Stops for 50 lb. Capacity Booms Many people want the flexibility a swing boom provides but need to limit swing in one or both directions. Two boom stops are available. One (below) has manually positioned (screw-in) stops that limit swing to 15º, 30º, 45º, or 60º in either direction. The other (left) has a spring loaded stop that, when pulled, allows the boom to swing freely throughout its normal 180º arc and, when released, lock it at the straight position or every 15º in either direction. Stops are easily installed on 50 lb. capacity swing booms without drilling or welding.
Manual Swing Boom Stop: W5S-SK
Spring Loaded Boom Lock: W5S-BMLK
HWS-FMK1 Kits for Mounting Fans to Ceiling Columns
Kit includes two U-Bolts and 13.50"w x 5.25"h Mounting Plate. End-user drills holes for fans. Column and fans are not included.
Order Online
Click the button of the item you wish to purchase.
