New patent-pending EdgeHalt® Ladder Safety Gates are now the safest safety gates on the market. Their innovative Slam-Proof™ technology closes each gate in a quiet, controlled manner. Plus, they have been tested to the OSHA, ANSI and Canada COHS standards and exceed the loading requirement by two times. EdgeHalt Safety Gates are also extremely reliable, featuring updated springs that have been tested to more than 1 million cycles and are guaran- teed for the life of the gate.
Slam-Proof™ Technology – A unique damping system that provides safety to the operator while the gate is closing.
Proven Safety For Your Team – Tested to the OSHA, ANSI and Canada COHS standards and exceeds the loading requirement by two times (OSHA 1910.29; OSHA 1910.28, ANSI A1264.1- 2017; Canada COHS SOR-86-304 Part II; ANSI A14.3).
Springs Guaranteed For Life Of Gate – Tested to exceed more than one million cycles, you can feel good that the springs on your gate will likely outlast everything around them.
Always In Place – Self-closing to protect employees from dangerous falls.
Save On Shipping – The gate’s unique design allows for a compact shipping box, reducing shipping costs by an average of $8-$18+ per gate.
AVAILABLE IN FOUR FINISHES: Powder Coat Yellow (PCY) Hot Dipped Galvanized (GAL) 304 Stainless Steel (304SW) Aluminum (ALU)
STAND-OFF MOUNTING SYSTEM (LSG-STNDOFF)
• This system is an optional railing attachment that creates increased platform space on the mezzanine edge and provides a steadying point on the platform for personnel to utilize when transitioning through the Ladder Safety Gate. • No-drill adapter bracket kits are available for mounting to angle iron, flat bar or nonstandard railings
GATE MODEL/SIZE
GATE FINISH TYPE
Model No.
RAILING OPENING WIDTH
FLAT SURFACE OPEING WIDTH
304SW
PCY
GAL
Min.
Max.
Min.
Max.
LSG-1520
15"
20"
17 5/16"
23 9/10"
LSG-2030
20"
30"
22 5/16"
32 9/16"
LSG-3040
30"
40"
32 5/16"
42 9/16"
LSG-4050
40"
50"
42 5/16"
52 9/16"
*Put Gate Qty. in White Table Cells
INSTALLATION (standard round pipe or square tube): The gate ships fully assembled, including standard mounting hardware for round pipe (up to 2" O.D.) and square tubing (up to 1.5" x 1.5" O.D.). If mounting to angle iron, flat bar or nonstandard railing, gate bolts directly to railing (hardware not included) or by purchasing and using a no-drill adapter bracket kit.
Optional Adapter Brackets Order gate at a size 2-1/2" smaller to account for mounting location.
Gate Construction:
• Gate: 1-1/4", 11-gauge* square tubing. Minimum dimension from top of gate arm to bottom of gate arm is 22-1/4". • Mounting Bracket: Universal mounting bracket fits round railings up to 2" O.D. and square railings up to 1-1/2" square. Bracket is adaptable to bolt to flat surfaces. • Hinge Plate: 10 gauge, full height of gate. Hinge plate provides for gate adjustment of 3-3/4", (-)1-1/4" to (+)2-1/2". • Standard Hardware: U-bolts, flat washers, nuts and plastic thread protector cap. • Springs: Torsion type, stainless steel. Minimum of two (2) springs per gate, housed within hinge pivot. • Material & Finish: To be one of the following, based on model:
• Gate Operation: Allows for 180° travel. Gate swing direction is reversible by inverting or rotating. • Packaging: Carton includes gate, standard mounting hardware, and Installation/O&M Manual. • Warranty: 1 Year Limited.
Ladder Safety Gate Optional "No Drill" Mounting Adapter Brackets are designed for unique mounting applications, or where "no drill" installation is required or desirable. PS Safety Access offers three optional adapter bracket models available in two-hinge or threehinge variations
a. Large Pipe Adapter Bracket (LP-2204): The LP-2204 adapter bracket is for square or rectangle railing columns or mounting surfaces which are larger than 2" O.D. up to 3-3/4" O.D. and/or 3"x3" square tube. b. Flat Bar Adapter Bracket (FB-2205): The FB-2205 adapter bracket is for rectangular bar stock columns larger than 2" O.D. up to 4" width. The maximum thickness capability of the FB-2205 is dependant upon the length of bolts. The standard FB-2205 includes bolts to fit a maximum thickness of 1/4". c. Angle Iron Adapter Bracket (AC-2206): The AC-2206 adapter bracket is for angle iron railing columns. It fits angle iron with a maximum dimension of 3-3/4" x 3-3/4". d. Finish: On all exposed surfaces. Choose from options below:
This system is an optional railing attachment that creates increased platform space on the mezzanine edge and provides a steadying point on the platform for personnel to utilize when transitioning through the Ladder Safety Gate.
