Chain Driven Live Roller Curve Conveyor, Conveyor, Roller Conveyors, Conveyors

MODEL 199-CRRC
CHAIN DRIVEN LIVE ROLLER CURVE CONVEYOR

The 199-CRRC is a chain driven live roller curve that aids in alignment of packages, cartons, etc., through 30 ., 45 ., 60 . and 90 . curves. Can be used in conveying oily parts.

11 Bed Widths
Reversible
Tapered Tread Rollers
Tapered Tread Rollers
Can Be Slave-driven from 199-CRR
Can Be Slave-driven from 199-CRR
Adjustable MS-Type Floor Supports Available


STANDARD SPECIFICATIONS

BED–Roller bed with 2-1/2 in. dia. tapered to 1-11/16 in. dia. x 16 ga. unplated rollers mounted in 10 Ga. powder painted formed steel channel frame.		BUTT COUPLINGS–Standard for connecting to 199-CRR.

		SPEED REDUCTION–Sealed worm gear C-Face speed reducer.

CENTER DRIVE–Located on 4’-0" long straight section.

		MOTOR–1/2 HP–208/230/460/575V–3 Ph. 60 Hz. Totally Enclosed C-Face.

ROLLER CHAIN–No. 40 circular roller-to-roller chain.

		CONVEYING SPEED–Constant 35 FPM.
		CONVEYING SPEED–Constant 35 FPM.
MOTOR DRIVE CHAIN–No. 60 chain.
MOTOR DRIVE CHAIN–No. 60 chain.		CAPACITY–850 lbs. total distributed live load.
		CAPACITY–850 lbs. total distributed live load.
CHAIN GUARD–Mounted to top of channel frame to totally enclose drive chain.
		FLOOR SUPPORTS–Now supplied as optional equipment.
		FLOOR SUPPORTS–Now supplied as optional equipment.

BEARINGS–Sealed, pre-lubricated ball bearings.


OPTIONAL EQUIPMENT SPECIFICATIONS

FLOOR SUPPORTS–MSN Type floor supports are available with a wide range of adjustment. Specify top of belt or roller elevation. One support required at every bed joint and ends of conveyor. Holes in feet for lagging to floor. Knee braces recommended above MSN-6 support.		GUARD RAILS–Adjustable Universal Channel Guard Rail (both sides), fixed channel (both sides) or angle (one side). See Accessory section

		POLY-TIER SUPPORTS–36 in. to 120 in. support heights in 6 in. increments. Knee braces supplied.

		CEILING HANGERS–5/8 in. dia. x 8 ft. long unplated rods fully threaded. Other lengths and galvanized rods available.

CONVEYING SPEED–Other constant and variable speeds. NOTE: Capacity affected with speed change.

SHAFT MOUNTED DRIVE–Requires shaft mounted gearmotor. Minimum elevation top of rollers 6 in.
		MOTORS–Energy efficient, single phase, brakemotor, other characteristics. 1 HP maximum.

O-RING DRIVE CHAIN–With sealed in lubricant (Recommended for applications that do not permit regular lubrication).
		ELECTRICAL CONTROLS–Non-reversing or reversible magnetic starters and push-button stations. AC variable frequency drive.

ROLLERS SET LOW–Tread rollers mounted in 4-3/4 in. x 10 Ga. formed steel channel frame to form 1 in. high guard rails.


PRICES FOR COMPLETE CONVEYOR INCLUDE:

2-1/2" Dia. Tapered to 1-11/16" Dia. Roller with #40 Roller-to-Roller Chain		1/2 HP–"C" Face Totally Enclosed Motor (Specify Exact Voltage) Mounted on 4’-0" Tangent

		35 FPM Conveying Speed
		35 FPM Conveying Speed
No. 60 Roller Chain on the Drive.
No. 60 Roller Chain on the Drive.		Less Electrical Controls
		Less Electrical Controls
4-3/4" x 1-1/2" x 10 Ga. Channel on the Chain Guard Side and 3-1/2" x 1-1/2" x 10 Ga. Channel on Side Opposite
		Less Supports

		Totally Enclosed Chain Guard


"C" Face Speed Reducer–Sealed Worm Gear

Order Online

Click the button of the item you wish to purchase.

(800) 544-3137

Conveying Surface	12 -1/4"	14 -1/4"	16 -1/4"	18 -1/4"	20 -1/4"	22 -1/4"	24 -1/4"	28 -1/4"	30 -1/4"	34 -1/4"	36 -1/4"
Between Rail Width	15"	17"	19"	21"	23"	25"	27"	31"	33"	37"	39"
Overall Frame Width	18"	20"	22"	24"	26"	28"	30"	34"	36"	40"	42"
90°	$4,918.16	$4,962.88	$5,009.68	$5,055.44	$5,100.16	$5,145.92	$5,191.68	$6,092.32	$6,233.76	$6,515.60	$6,657.04
60°	$4,243.20	$4,273.36	$4,303.52	$4,332.64	$4,363.84	$4,392.96	$4,423.12	$5,026.32	$5,120.96	$5,308.16	$5,402.80
45°	$3,768.96	$3,790.80	$3,811.60	$3,833.44	$3,854.24	$3,875.04	$3,896.88	$4,542.72	$4,594.72	$4,698.72	$4,750.72
30°	$3,439.28	$3,452.80	$3,466.32	$3,479.84	$3,493.36	$3,506.88	$3,520.40	$3,913.52	$3,946.80	$4,011.28	$4,044.56


*IMPORTANT NOTES...*
OTHER WIDTHS		DRIVE
	Contact us for lead time.		Drive must be mounted on a 4 ft. long tangent. (Specify infeed or discharge.)
FLOOR SUPPORTS
		NON-STANDARD WIDTHS WITH STANDARD INSIDE RADIUS
	Floor Supports are not included in base price. There are two (2) stationary floor supports and one (1) single center leg required.
			Contact us for lead time.

MOTORS

GUARD RAILS

Extra Motor Price for OTHER THAN: 1/2 HP -
208/230/460/575V - 3 pH - 60 Hz. - Totally Enclosed.

90°, 60°, 45°, 30°
Adjustable Universal Channel Guard Rail

Speed affects horsepower requirements.

Inside Only ...........................................

$109.93

H.P. REQ.	TOTALLY ENCLOSED		ENERGY EFFICIENT
H.P. REQ.	200/208/230/ 460/ 575V 3 Ph - 60 Hz.	115/230V 1 Ph - 60 Hz.	230/460V 3 Ph - 60 Hz.	575 V 3 Ph- 60 Hz.
1/2	N/C	$43.37	$442.00	$442.00
1	N/A	$157.87	$549.02	$549.02
2	N/A	$1,330.37	$1,071.72	$1,071.72

Outside Only .........................................

$166.82

Angle Type "A"
1-1/2" x 1-1/2" x 12 Ga. (Opposite Chain Guard)

..............................................................

$74.67

Fixed Channel Guard Rail

3-1/2" x 1-1/2" Fixed Channel - Opposite Chain
Guard and 2-1/2" x 1-1/2" Fixed Channel on Top

of Chain Guard ..........................................

$232.54

TANGENTS

Tangents are available in lengths listed below with rollers
mounted on 4" centers.

3-1/2" x 1-1/2" x 12 Ga. (Outside Only)

..............................................................

$151.53

OAL Tangent	199-CRRC
12"	$270.82
16", 18", 20", or 24"	$555.05
28", 30", 32", 36"	$832.73
40", 42", 44", 48"	$1,110.62 90

NOTE: For tangents over 18" long on either end or both
ends, add one additional floor support per end.

FLOOR SUPPORTS

ELECTRICAL CONTROLS

Not Included in Base Price. Use Chart Below for
Required Elevation.

See below

GALVANIZING

MS FLOOR SUPPORTS
Model No.	Adjustment to Top of Roller	Price Each.
MSN-1*	10-3/4" to 12-1/2"	$64.38
MSN-1.2*	11-3/4" to 13-1/2"	$64.38
MSN-1.4*	12-3/4" to 14-1/2"	$64.38
MSN-2*	13-3/4" to 16-3/4"	$66.56
MSN-3*	16-11/16" to 19-11/16"	$73.22
MSN-4	19-11/16" to 25-11/16"	$84.24
MSN-5	23-11/16" to 29-11/16"	$87.98
MSN-6	27-11/16" to 39-11/16"	$97.14
MSN-7	37-11/16" to 49-11/16"	$143.52
MSN-8	49-11/16" to 61-11/16"	$163.70
MSN-9	61-11/16" to 73-11/16"	$179.50
MSN-10	73-11/16" to 85-11/16"	$204.57
MSN-11	83-11/16" to 95-11/16"	$226.30
MSN-12	95-11/16" to 107-11/16"	$236.50

DRIVE COMPONENT DEDUCTS

Less Complete Motor Drive and Tangent

Deduct ................................................

$694.20

Less Motor Only (1/2 HP-208/230/460/575 V-3
Ph.-60 Hz.)

Deduct ................................................

$258.30

Less Reducer* ............... Deduct ............

$307.40

*Less V-Belt Guard, Chain Guard, sheaves and
sprockets when V-Belt drive is supplied. Less
chain guard and sprockets when C-Face drive is
supplied.

CHAIN CROSSOVER

18" - 24" ...............................................

$455.42

26" - 30" ...............................................

$510.85

34" - 42" ...............................................

$566.07

*Less than 17" top of roller elevation -

Shaft Mounted Drive Required

NOTE: MSN-7 to MSN-12: Knee Braces included
in price.

Extra Knee Braces ...............Add per pair ....

$33.07

Single Center Leg (MS-6 and below) each ...

$66.56

Single Center Leg (MS-7 and below) each ...

$82.89

Order Online

Click the button of the item you wish to purchase.

(800) 544-3137

CEILING HANGERS
	Ceiling Hanger Brackets with (2) 5/8" dia. x 8’-0" long unplated fully threaded rods ......................................................................
		$162.97
	Ceiling Hanger Brackets with (2) 5/8" dia. x 8’-0" long galvanized fully threaded rods .......................................................................
		$194.69
	Ceiling Hanger Brackets with (2) 5/8" dia. x 10’-0" long unplated fully threaded rods................................................................................
		$240.86
	Ceiling Hanger Brackets with (2) 5/8" dia. x 10’-0" long galvanized fully threaded rods.................................................................................
		$396.45
	Ceiling Hanger Brackets with (2) 5/8" dia. x 12’-0" long unplated fully threaded rods.................................................................................

		$399.78
	Ceiling Hanger Brackets with (2) 5/8" dia. x 12’-0" long galvanized fully threaded rods..................................................................................
		$462.28
	Ceiling Hanger Brackets, Less Rods Only ....................................	$102.65
	Extra Length Rods:
	(2) 8’-0" long x 5/8" dia. unplated fully threaded rods ..................	$59.70
	(2) 8’-0" long x 5/8" dia. galvanized fully threaded rods ...............	$91.94
	(2) 10’-0" long x 5/8" dia. unplated fully threaded rods ................	$138.01
	(2) 10’-0" long x 5/8" dia. galvanized fully threaded rods .............	$293.59
	(2) 12’-0" long x 5/8" dia. unplated fully threaded rods ................	$297.23
	(2) 12’-0" long x 5/8" dia. galvanized fully threaded rods .............	$359.84
	Hex Coupling Nuts for Rods .........................................................	$5.41
	Above noted delivery times determined by delivery time of model ordered.

POLY-TIER SUPPORTS

PRICES FOR COMPLETE
SUPPORT INCLUDE:

IMPORTANT NOTES
• Check for Clearance
• Specify type of conveyor to be used.
• Use in place of LS or MS Supports only.

• Painted Steel Support Legs
• Adjustable Cross pipe Assembly
• Knee Braces (1 set per level of
conveyor)
• "U" Brackets
• Single Width Conveyor Only

CAPACITY DATA:
1500 lbs..............................................per cross pipe
4500 lbs..............................................per set of legs

(2) TIER POLY-TIER SUPPORTS
36"	$343.24
42"	$352.78
48"	$362.20
54"	$371.51
60"	$381.05
66"	$390.72
72"	$400.02
78"	$409.56
84"	$418.86
90"	$428.28
96"	$437.95
102"	$447.49
108"	$457.04
114"	$467.07
120"	$475.63

(3) TIER POLY-TIER SUPPORTS
36"	$483.96
42"	$493.63
48"	$503.05
54"	$512.35
60"	$521.89
66"	$531.56
72"	$540.86
78"	$550.40
84"	$559.82
90"	$569.24
96"	$578.67
102"	$588.21
108"	$598.00
114"	$606.82
120"	$616.24

Order Online

Click the button of the item you wish to purchase.

(800) 544-3137

ELECTRICAL CONTROLS AND DRIVE SECTION

MANUAL START SWITCH or
SAFETY DISCONNECT

LIMIT SWITCH, SINGLE POLE,
WITH NYLON ROLLER LEVER

#032.1014.........................................

$234.82

#033.2032 & #033.2072..................$612.57
Nema 4

"START-STOP", Nema 1, One direction, 30
AMP, 3 Pole (Single or 3 phase)

LIMIT SWITCH, DOUBLE POLE,
WITH NYLON ROLLER LEVER

#033.2033& #033.2072...................$366.12
Nema 4

REVERSING DRUM SWITCH

#032.103..........................................

$941.73

"Fwd-Stop-Rev", Nema 1, for 1-1/2 HP at
115 volts or 2 HP at 230 volts single phase,
or 2 HP max. three phase

PROXIMITY SWITCH, INDUCTIVE,
(METAL SENSING)

#032.210.........................................$226.38
115 Volt AC, two wire with ground, 30mm dia.,
10mm range

FOOT SWITCH WITH GUARD

#032.211.........................................$267.99
24 Volt DC, two wire with ground, 30mm dia.,
10mm range

#032.200........................................... $297.96
(Constant Pressure) "On-Off" type, Nema 1,
Pilot Control or 1 HP max. single phase.

PHOTO EYE, ON-OFF TYPE

#EA-000005......................................$1,167.74
Banner Q45 Retro Reflective Photo Eye Kit
with timing module, reflector and mounting
brackets. Photo Eye output is one form C
type relay, Operating voltage
24-250VAC/12-250VDC

POWER CORD AND PLUG (20')

POWER CORD WITH PLUG ONLY 20' LONG
Model No.	Voltage	HP Rating	Prices
EA-039-1A	115/1	1/2-3/4	$117.59
EA-039-2A	115/1	1	$117.59
EA-039-3A	115/1	1 1/2	$171.07
EA-039-4A	230/1	1/2-1	$117.59
EA-039-5A	230/1	1 1/2-2	$120.90
EA-039-6A	208-230/3	1/2-2	$196.88
EA-039-7A	460/3	1/2-2	$196.88

POWER CORD WITH PLUG 20' LONG WITH MANUAL START SWITCH AND MOUNTING BRACKET
Model No.	Voltage	HP Rating	Prices
EA-039-1B	115/1	1/2-3/4	$190.89
EA-039-2B	115/1	1	$364.53
EA-039-3B	115/1	1 1/2	$416.66
EA-039-4B	230/1	1/2-1	$323.04
EA-039-5B	230/1	1 1/2-2	$364.53
EA-039-6B	208-230/3	1/2-2	$400.14
EA-039-7B	460/3	1/2-2	$400.14

MOUNTING BRACKETS FOR PHOTO
EYE #033.2122

B-05165...........................................$0.00

AIR PRESSURE SWITCH

#094.191........................................$762.10
Nema 4

EMERG. STOP PULL CORD SWITCH

#032.285 with 032.2851 Turnbuckle
...........................................................$767.36
Nema 4

"RED" EMERGENCY PULL CORD
CABLE AND MOUNTING HARDWARE

#032.281...one side.................$8.20 per / ft.
both sides..............$17.50 per / ft.

EMERGENCY PUSH BUTTON

#032.284..........................................$308.25
Nema 4

PHOTO EYE, 18MM DIA., DIFFUSED,
(PHOTO PROX.) 115 VOLT, LIGHT
OPERATE, 2-METER CABLE

#032.2113 (100mm range, 3.94")....$1,175.45
#032.2116 (200mm range, 7.87")....$214.02
#033.218 (400mm range, 15.74")....$323.53

NOTE: PRICING LISTED NOT MOUNTED
OR WIRED

"PHOTO EYE, RETRO-REFLECTIVE,
(POLARIZED) 24 VOLT DC

#033.2128 with 032.21122 Cable.....$263.58
#032.21122 (Cable Only)...................$79.78

Order Online

Click the button of the item you wish to purchase.

(800) 544-3137

CONTROLLER PRICES

AC VARIABLE SPEED CONTROLLER ONLY
SINGLE PHASE CONTROLLER INPUT
Motor Size	115 Volt		208/230 Volt
1/2	VSC-12-10		VSC-12-12
Price	$1,644.60		$1,311.16
1	VSC-12-11		VSC-12-13
Price	$1,900.84		$1,533.50
2	N/A		VSC-12-14
Price	~		$1,977.93
THREE PHASE CONTROLLER INPUT
Motor Size	208/230 Volt	460 Volt	575 Volt
1/2	VSC-01-15	VSC-01-18	VSC-12-29
Price	$1,725.25	$1,825.95	$2,376.47
1	VSC-01-16	VSC-01-19	VSC-12-29
Price	$1,741.52	$1,977.93	$2,376.47
2	VSC-01-17	VSC01--20	VSC-12-30
Price	$2,181.31	$2,282.37	$2,936.18

REPLACEMENT INVERTER DUTY
ENERGY EFFICIENT MOTORS

HP	Part No.	Price
1/2	032.351 230/460	$682.07
1	032.353 230/460	$777.76
2	032.355 230/460	$878.96
1/2	032.3512 575	$1,597.49
1	032.3532 575	$1,776.14
2	032.3552 575	$2,091.37

IMPORTANT NOTES...

• All above motors are 230 / 460 / 575 Volt, 3 Phase.
• All above V/S Drive Kits include NEMA 1 / IP30
Junction Box, Controller and Motor.
• Good for cycle rates of up to 15 cycles per minute, at
1/2 second ramp time, with a maximum speed of 250
FPM.
• Drawing No. DG-001146.

OPTIONAL: Mounting and Wiring Add-On . . .
(mounted close to the motor)

$744.33

Brake Relay Kit (EA-068A)..............................

$598.25

• When AC Variable Speed Controller is used with a
Brake Motor, A Brake Relay Kit (EA-068A) is
required. Add an additional $598.25 for this option.)

ELECTRONIC CLUTCH BRAKE DRIVE PACKAGE

Part No.	Description	Price
EA-VSC-01-CB	2 HP Electronic Clutch-Brake Kit	$5,575.96

OPTIONAL: Mounting and Wiring Add-on .
(mounted close to the motor)

$744.33

KIT INCLUDES

Part No.	Description
VSC-01-20	AC Variable Speed Controller, 460 Volt, 3 Phase
032.345	2 HP 460 Volt, 3 Phase, C-Face Motor TEBC (Blower Cooled) With 5AC Reducer and #60 Chain and Sprockets

IMPORTANT NOTES

• Good for cycle rates of up to 60 cycles per minute.
• 1/10 second Accel and Decel time, with 350 FPM
Maximum Speed.
• 230 or 460 Volt Only, Other Voltages, Contact us.
• Motor Cooling Blower is 115 Volt, 1 Phase, 60 Hz.
• Price Includes 5AC Reducer and #60 Chain and
Sprockets

Part No.	Description
VSC-01-17	AC Variable Speed Controller, 230 Volt, 3 Phase
032.345	2 HP 230 Volt, 3 Phase, C-Face Motor TEBC (Blower Cooled) With 5AC Reducer and #60 Chain and Sprockets

Order Online

Click the button of the item you wish to purchase.

(800) 544-3137

• "Start-Stop" Push-button Station		• "Start-Stop"Push-button Station
033.1955	$232.87		033.195.................................................	$157.14
Remote mounted, Nema 1			To be mounted in Mag Starter Cover

• "Fwd-Rev-Stop" Push-button Station		• "Fwd-Rev-Stop"Push Button Station
033.1965	$437.70		033.196..................................................	$541.23
Remote mounted, Nema 1			To be mounted in Mag Starter Cover

• "Up-Down-Stop" Push-button Station
033.1975	$437.70	• Mounting Brackets for photo eye
Remote mounted, Nema 1		• Mounting Brackets for photo eye
Remote mounted, Nema 1			#033.2122 B-05165 ..............................................	$0.00
				$0.00

CONVEYOR WEIGHT CHART

Conveying Surface	Between Rail Width	Overall Frame Width	"R"	Number of Rollers*				WEIGHTS (Lbs.)
Conveying Surface	Between Rail Width	Overall Frame Width	"R"	90°	60°	45°	30°	90°	60°	45°	30°
12 1/4"	15"	18"	32 1/2"	14T	10T	6T	4T	390	312	297	282
14 1/4"	17"	20"						400	320	305	290
16 1/4"	19"	22"						410	328	313	298
18 1/4"	21"	24"						420	336	321	306
20 1/4"	23"	26"						430	344	329	314
22 1/4"	25"	28"						440	352	337	322
24 1/4"	27"	30"						450	360	345	330
28 1/4"	31"	34"	48"	20T	16T	10T	6T	480	390	375	365
30 1/4"	33"	36"						560	398	383	373
34 1/4"	37"	40"						530	414	399	389
36 1/4"	39"	42"						540	432	407	397

All weights are conveyor weights only. Accessories, crating, etc., are not included.

Chain Drive Live Roller Curve Conveyor, Chain Driven Live Roller Conveyors, Conveyor, Live Roller Conveyors,
Powered Live Roller, Conveyors, and Roller Conveyors from your source for material handling equipment.

MODEL 199-CRRC