Slotted angle helps you build an efficient framing system for a variety of uses from machine guards to hand rails. Slotted Angle is the most versatile, time and cost effective construction material available for building carts, ladders, benches, shelving, cases, racks or any other type of structure. Made of either 12 or 14 gauge roll-formed steel. Slotted Angle is finished in Gray Powder Coat Enamel or corrosion resistant galvanized finish.
The Ideal Material to Build Carts, Scaffolds, Benches, Platforms, Framing, and So Much More in an Economical Way
See below for Prices and capacity charts
Easy to use... Just measure, cut and bolt together. • Scientifically designed pattern of holes and slots are perfectly positioned for bolting pieces together at various angles without needing to drill holes. • No special tools required but our slotted angle cutter cuts completely through with one fast easy stroke. • Prime, cold rolled steel with painted or hot dipped, rust-resistant, galvanized finish. • Available in 96", 120" and 144" lengths in 14 gauge and 12 gauge steel. • 100% reusable. Even short pieces of angle can be used as a cleat to join together angle lengths into longer ones. • Old outmoded structures can be unbolted and reassembled into new ones.
2 1/2" x 1 1/2" x 10'
1 1/2" x 1 1/2" x 10'
3" x 1 1/2" x 10'
12 Gauge – For Heavy Duty Jobs Heavier weight cold-rolled high strength steel – recommended for use when greater strength and carrying capacity is required. • Nominal size 3" x 1 1/2" • Available in 8’, 10’ and 12’ lengths, painted • Packaged 10 pieces per bundle (Prices are per piece, but must be ordered in quantities of 10)
14 Gauge – For Average Jobs Cold-rolled high strength steel – recommended when extreme load are not required • Nominal size 1-1/2" x 1-1/2" and 1-1/2" x 2-1/2" • Available in 8’, 10’ and 12’ lengths, painted • Packaged 10 pieces per bundle (Prices are per piece, but must be ordered in quantities of 10)
Order Online
Click the button of the item you wish to purchase.
• Cuts all slotted angle sizes, burr free in one fast operation. • Cuts any pieces to length including short pieces to be used for cleats. • Cuts both sides of the L shape in one operation. • Long 36" and 42" handles provide lots of leverage.
Load Capacities When Slotted Angle is Used as Beams
Angle Type
Span of Beams in Feet
2'0"
3'0"
4'0"
5'0"
6'0"
7'0"
1.5"
225
145
95
2.5"
440
275
190
150
3.0"
650
400
275
200
150
(Horizontal Members) In Pounds Each Section Combination sections are bolted together on 6" centers. Capacities based on uniformly distributed load. For concentrated loads, use half these figures.
Load Capacities When Slotted Angle is Used as Uprights
Angle Type
Column Sections
2'
3'
4'
5'
6'
7'
1.5"
2210
1740
2.5"
2410
2090
1665
1285
955
3.0"
3880
3555
3090
2290
1495
1080
(Vertical Posts) In Pounds Each Section To determine safe allowable load per column, use longest vertical space between horizontal braces.
Note: CAUTION: All loads given are based on uniform loading. Consideration must be given to concentrated loads, shock loads and methods using material handling
Slotted Angle Load Capacities:
1 1/2" x 3" Angle Type
Column SectionDRE
2 ft. - 3,880 lbs. 3 ft. - 3,555 lbs. 4 ft. - 3,090 lbs. 5 ft. - 2,290 lbs. 6 ft. - 1,495 lbs. 7 ft. - 1,080 lbs.
Capacities on column sections do no apply to conditions of accidental or shock load.
Angle Slotted, Angles Slotted, Slotted Angle, Slotted Angle Cutter, Slotted Angle Iron, Slotted Angles, and Steel Slotted Angle from your complete source for material handling equipment.
