Walkie
version of the sit-down rider lift truck makes
it an ideal choice for manufacturing work cells and
handling a variety of load sizes.
CAPACITY
• 2200 lb at 24" load center
BATTERY
• 24-volt four pack power MF 224 AH with
5.4 kWh 100V AC plug-in charger
• Minimum battery weight: 340 lb
• Compartment dimensions (open): 26.4" x 9.1"
• Connector: SB-175 Gray—A-11
SPEED
• 24-volt ZAPI AC-0 travel controller
•
EMPTY: 0 - 3.4 mph
• LOADED: 0 - 3.1 mph
•
LIFT - EMPTY: up to 33 fpm
• LIFT - LOADED: up to 25 fpm
• LOWERING - EMPTY: up to 29 fpm
• LOWERING - LOADED: up to 57 fpm
BRAKES
• Regenerative electromagnetic is mounted on motor
armature shaft, multiplying the braking power
through the transmission
• Travel speed reduced when forks above 12" fork
height
• Brake is applied when control arm is in the vertical
or horizontal handle position
• Neutral braking resists roll back on ramps
TILT
• BACK: 4°
• FORWARD: 2°
TIRES
/ WHEELS
• DRIVE: 9" x 3" polyurethane
• LOAD: 8" x 3" polyurethane
HYDRAULICS
• Hard chrome lift cylinder
• Pump unit includes motor, gear pump,
solenoid, and pressure compensated
lowering valves
OPERATION
/ CONTROLS
• Ergonomic operator handle with travel, lift,
and lower functions
• Wrap around guard
• Reversing switch
• Thumb control
• Key switch and horn
• Gas-assisted spring handle
ELECTRICAL
• ZAPI AC-0 travel controller and AC drive motor
provides high torque throughout entire drive range
• Low-maintenance brushless design
• Automatic resetting circuit breaker and one piece
micro switch
• Low battery interrupt
• Hour meter / battery discharge indicator combo
TRANSMISSION
• Vertically mounted drive motor direct mounted
to gear housing
• Oil-bathed ZF GK10 hypoid bevel gear drivetrain
• State-of-the-art optimized gear technology provides
minimal envelope circle, zero maintenance, and
low
noise level
FRAME
AND MAST
• Bolt-on high-visibility I-beam construction, lift
cylinders are positioned on outer I-beam for
best view through mast
• Dual lifting chains
• Class II ITA fork carriage with 36" tall load
back rest
• Adjustable forks
For
ease of use add 6" to 8" aisle dimension
listed.
Note:
Aisle dimensions listed above assume the
larger dimension; load width or load length. For
ease of use and add 6" to 12" for operator clearance
to the appropriate specifications listed above.
Truck performance may vary due to application
requirements' and changes in model design.
Model
#
Mast
Lift
Height
Col.
Height
Free
Lift
Ext.
Height
w/LBR
Gradeability
Weight
lb.
(Chassis
Only)
Loaded
Unloaded
A
B
C
E
F
G
2200
lb Capacity at 24" Load Center ITA Class II Fork
Carriage
BGL-22-104
Telescopic
104"
72.3"
6"
143"
5%
8%
4500
BGL-22-128
Telescopic
128"
83.2"
165"
5%
8%
4550
BGL-22-157*
TripleStage
157"
71.0"
50"
193"
5%
8%
5007
*
Derates 400 lb above 128"
STANDARD
FEATURES:
• 24-volt ZAPI travel controller
• AC drive motor
• 224 AH battery package (4-6 volt, maintenance-free AGM
batteries), complete
with automatic 25AMP / 110 VAC plug-in internal
charger.
• Battery discharge indicator (BDI), hour meter (HM), combo
gauge, key switch
• Battery compartment size: 26.4" x 9.1" x open
Connector is SB-175 Gray-A-11
• Fork size: 42" x 4" x 1.5"
Adjustable from 8" to 30" O.D.
• 1 – 9" x 3" press-on polyurethane drive
tire
• 2 – 8" x 3" polyurethane load wheels
• High visibility I-beam mast
• Travel, lift, lower, and tilt functions are located in
the ergonomic operator handle
• Creep speed control
• Class II ITA fork carriage, 36" LBR
Order Online
Click the button of the item you wish to purchase.
BGL-22 Counterbalanced
Stacker, Electric Forklifts, Power Drive Counterbalanced,
Blue Giant Lift Trucks, Counterbalance
Lift Truck, Fork Lift Truck, Walk Behind Lift Truck, Battery
Powered Lift Truck, Electric Lift Truck, Powered Lift Stacker,
Forklift
Trucks, and Pallet Lift Truck from your source for material
handling equipment.
