Back to Product Category
WC200-WALL
CANTILEVER JIB CRANE |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
An
ideal jib for maximizing headroom |
|
|
|
|
|
|
|
|
|
The Wall Cantilever (WC200)
provides hoist coverage and 200° rotation for individual use in bays,
along walls
or columns of plants, or as a supplement to an overhead crane or monorail
system. The jib has the advantage of
providing maximum lift for the hoist, since it can be installed very close
to the underside of the lowest ceiling obstruction. |
|
|
|
|
|
|
|
|
Two
key requirements must be met before applying the Wall Cantilever Series: |
|
|
|
|
|
|
|
|
|
1.
A structurally adequate wall or column to support the jib must exist. |
|
|
2.
Sufficient clearance above the boom throughout its arc must exist. |
|
|
|
|
|
|
|
|
ADVANTAGE: |
|
|
|
|
|
|
|
|
|
|
EASE
OF MOVEMENT - The fitting containing bronze bushings and oil-impregnated
bronze thrust washers
provide for easy rotation and superior load positioning. |
|
|
|
|
|
|
|
| SAFETY - Fabricated steel fittings provide excellent torsional rigidity. |
|
|
|
|
|
|
|
FULL
RATED CAPACITY - Pre-engineered for use with powered hoists.
A factor of 15% of the jib crane
capacity is allowed for the hoist and trolley weight with an additional
25% of the capacity allowed for impact,
thus giving full rated capacity use of the jib. |
|
|
|
|
|
|
|
EASE
OF INSTALLATION
• When
the bracket center dimension is 6'0" or less, the mast/boom connection
is welded.
This provides the most economical means of installation.
• When the bracket center is greater
than 6'0", a bolted mast/boom connection is used, which enables
the larger cranes to be shipped disassembled for ease of handling
during shipping and installation. |
| • Grease fittings are provided
for easy field lubrication. |
|
 |
|
|
|
|
Top and Bottom
Bracket Fittings |
|
|
|
|
|
 |
|
|
Wall Cantilever
fitting kits are
available for fabrication of cranes
locally. See bottom of page. |
|
|
|
|
|
|
|
|
The
Thrust & Pull diagram above details the thrust and pull forces
that the jib applies to the supporting structure when a load is lifted.
It is essential that a structurally adequate wall or column exists.
Refer to the Thrust & Pull chart for exact forces. |
|
|
|
|
|
|
|
|
|
 |
|
| STANDARD
BOOM DATA |
Boom
Height (W) |
Beam Size |
Flange
Width (in) |
| 6" |
W6@12#/ft. |
4" |
| 8.125" |
W8@18#/ft. |
5-1/4" |
| 10.33" |
W10@26#/ft. |
5-3/4" |
| 12.5" |
W12@35#/ft. |
6-1/2" |
| 16.125" |
W16@45#/ft. |
7" |
| 18" |
W18@50#/ft. |
7-1/2" |
| 21" |
W21@62#/ft. |
8-1/4" |
| 24.125" |
W24@84#/ft. |
9" |
|
|
|
|
|
| Bolt
Pattern |
E |
F |
G |
Hole
Dia. |
Bolt
Dia. |
Bracket
Thickness |
| WC-B1 |
5" |
3-1/2" |
6" |
11/16" |
5/8" |
1/2" |
| WC-B2 |
5" |
4" |
6" |
13/16" |
3/4" |
5/8" |
| WC-B3 |
5" |
4" |
6" |
13/16" |
3/4" |
3/4" |
| WC-B5 |
7" |
6" |
9" |
1-5/16" |
1-1/4" |
1" |
|
|
|
 |
|
Order
Online, by Phone, or by E-Mail |
|
|
|
~ Add
items to your online shopping cart ~
Click the Model No. of the item you wish
to purchase. |
|
|
|
|
|
|
|
PRICING |
Cap.
Tons |
Span
(A) |
Model
No. |
Bracket
Model |
Bracket
Centers (B)
| Wall
To
Bracket F
| Beam
(W) |
Thrust
&
Pull (lb.) |
Ship
Wt.
(Lbs.) |
Price |
1/4 |
8' |
|
B1 |
3'0" |
3
1/2" |
W6 |
1767 |
250 |
$2,208 |
10' |
|
B1 |
3'0" |
3
1/2" |
W6 |
2308 |
275 |
$2,259 |
12' |
|
B1 |
3'0" |
3
1/2" |
W6 |
2867 |
310 |
$2,418 |
14' |
|
B1 |
3'0" |
3
1/2" |
W8 |
3533 |
375 |
$2,452 |
16' |
|
B1 |
3'0" |
3
1/2" |
W8 |
4285 |
475 |
$2,685 |
18' |
|
B1 |
4'0" |
3
1/2" |
W8 |
3720 |
530 |
$2,836 |
20' |
|
B1 |
4'0" |
3
1/2" |
W10 |
4595 |
750 |
$3,404 |
1/2 |
8' |
|
B1 |
3'0" |
3
1/2" |
W8 |
3430 |
280 |
$2,373 |
10' |
|
B1 |
3'0" |
3
1/2" |
W8 |
4455 |
315 |
$2,418 |
12' |
|
B1 |
3'0" |
3
1/2" |
W8 |
5501 |
350 |
$2,580 |
14' |
|
B1 |
4'0" |
3
1/2" |
W8 |
5001 |
455 |
$2,711 |
16' |
|
B1 |
4'0" |
3
1/2" |
W10 |
6063 |
650 |
$3,424 |
18' |
|
B1 |
4'0" |
3
1/2" |
W10 |
3979 |
700 |
$3,489 |
20' |
|
B1 |
6'0" |
3
1/2" |
W10 |
5493 |
965 |
$4,003 |
1 |
8' |
|
B1 |
4'0" |
3
1/2" |
W8 |
5047 |
350 |
$2,551 |
10' |
|
B1 |
5'0" |
3
1/2" |
W8 |
5294 |
545 |
$2,773 |
12' |
|
B1 |
5'0" |
3
1/2" |
W10 |
6526 |
570 |
$2,904 |
14' |
|
B1 |
5'0" |
3
1/2" |
W10 |
7778 |
620 |
$3,060 |
16' |
|
B1 |
6'0" |
3
1/2" |
W10 |
7678 |
875 |
$3,745 |
18' |
|
B1 |
6'0" |
3
1/2" |
W16 |
9148 |
1258 |
$4,536 |
20' |
|
B1 |
6'0" |
3
1/2" |
W16 |
10367 |
1357 |
$4,771 |
1
1/2 |
8' |
|
B2 |
3'0" |
4" |
W8 |
10071 |
440 |
$3,367 |
10' |
|
B2 |
3'0" |
4" |
W10 |
13023 |
485 |
$3,587 |
12' |
|
B2 |
4'0" |
4" |
W10 |
12122 |
635 |
$3,973 |
14' |
|
B2 |
4'0" |
4" |
W12 |
14429 |
698 |
$4,052 |
16' |
|
B2 |
5'0" |
4" |
W12 |
13414 |
845 |
$4,556 |
18' |
|
B2 |
6'0" |
4" |
W18 |
13250 |
1450 |
$5,978 |
20' |
|
B2 |
6'0" |
4" |
W18 |
14967 |
1551 |
$6,260 |
Cap.
Tons |
Span
(A) |
Model
No. |
Bracket
Model |
Bracket
Centers (B)
| Wall
To
Bracket F
| Beam
(W) |
Thrust
&
Pull (lb.) |
Ship
Wt.
(Lbs.) |
Price |
2 |
8' |
|
B2 |
4'0" |
4" |
W10 |
10054 |
560 |
$4,051 |
10' |
|
B2 |
4'0" |
4" |
W10 |
12998 |
620 |
$4,153 |
12' |
|
B2 |
4'6" |
4" |
W16 |
14409 |
960 |
$4,473 |
14' |
|
B2 |
5'0" |
4" |
W16 |
15442 |
1079 |
$4,993 |
16' |
|
B2 |
6'0" |
4" |
W18 |
15067 |
1350 |
$5,983 |
18' |
|
B2 |
6'6" |
4" |
W18 |
15892 |
1490 |
$6,666 |
20' |
|
B2 |
7'6" |
4" |
W21 |
15840 |
2030 |
$7,969 |
3 |
8' |
|
B3 |
4'0" |
4" |
W16 |
15060 |
802 |
$5,445 |
10' |
|
B3 |
4'6" |
4" |
W16 |
17300 |
896 |
$5,893 |
12' |
|
B3 |
5'6" |
4" |
W16 |
17389 |
985 |
$6,471 |
14' |
|
B3 |
6'0" |
4" |
W18 |
19017 |
1219 |
$6,953 |
16' |
|
B3 |
7'6" |
4" |
W18 |
17653 |
1505 |
$7,744 |
18' |
|
B3 |
8'6" |
4" |
W21 |
17982 |
1940 |
$8,585 |
20' |
|
B3 |
9'6" |
4" |
W21 |
18105 |
2640 |
$10,271 |
5 |
8' |
|
B5 |
6'6" |
6" |
W18 |
15323 |
1257 |
$9,223 |
10' |
|
B5 |
6'6" |
6" |
W18 |
19770 |
1353 |
$9,406 |
12' |
|
B5 |
6'6" |
6" |
W21 |
24379 |
1720 |
$9,722 |
14' |
|
B5 |
7'6" |
6" |
W21 |
25077 |
1920 |
$10,433 |
16' |
|
B5 |
9'6" |
6" |
W24 |
23230 |
2544 |
$11,849 |
18' |
|
B5 |
9'6" |
6" |
W24 |
26485 |
2500 |
$12,131 |
20' |
|
B5 |
9'6" |
6" |
W24 |
29769 |
2630 |
$12,546 |
|
|
|
|
|
Order
Online, by Phone, or by E-Mail |
|
|
|
~ Add
items to your online shopping cart ~
Click the Model No. of the item you wish
to purchase. |
|
|
| JIB
CRANE ACCESSORIES |
|
Included
in the base price of all Jib Cranes: Jib end stops, installation & maintenance
manuals (2),
and touch-up paint (1 spray can). |
| Model |
Description |
Weight
(lbs.) |
Price |
|
Rotation
stops |
2 |
$85 |
|
Tagline
Assemblies - includes two trolley stops with tagline angle,
tagline
cable, 2 cable clamps, 2 eye bolts, and 5 "S" hooks. Electrical
wire is not included. |
29 |
$326 |
|
|
WALL
CANTILEVER KITS |
|
Customers
can make their own Wall Cantilever Jib cranes by using high quality components.
Buy an
I-beam for the mast and boom locally, and fabricate the mast stiffeners,
top connection plate, corner
brace and trolley stops. |
|
One-quarter (1/4) ton, one-half
(1/2) ton, one (1) ton, one and one-half (1 1/2) ton and two (2) ton wall
cantilever
kit consists of a top and bottom bracket and sixteen (16) A325 Grade 5
bolts for attaching the fittings to the mast
assembly. Three (3) ton wall cantilever kits consist of a top and bottom
bracket and eight (8) A325 Grade 5 bolts
for attaching the fittings to the mast assembly. Each assembly includes
a formed mounting channel, pivot bolts with
lock washer and hex nut, fabricated pivot assembly and thrust washer.
The fabricated pivot assembly contains two
(2) oilite thrust washers, two (2) bronze bushings, a grease fitting,
and a pre-drilled mounting plate to bolt the assembly
to the flange of the jib crane mast.
Note: Kits come non-painted as standard. |
|
The
kits are used on one-quarter (1/4) ton, one-half (1/2) ton, one (1) ton,
one and one-half (1 1/2) ton, two (2) ton,
and three (3) ton capacity WC200 Series jib cranes for spans ranging from
8' to 20'. |
|
|
|
|
| Capacity |
Model |
Weight
(lbs.) |
Price |
| 1/4, 1/2, 1 Ton |
WC-B1 |
76 |
$923 |
| 2 Ton |
WC-B2 |
118 |
$1,282 |
| 3 Ton |
WC-B3 |
161 |
$1,944 |
| 5 Ton |
Not
available in Kit (Only Complete Crane) |
|
|
|
|
|
DIMENSIONS
BETWEEN BRACKETS MUST BE HELD TO THAT GIVEN IN THE WC200 SERIES
CHART. We are not responsible for deviation from above capacity and span
recommendations, variance
from our recommended limitations between brackets, overloading, or incorrect
installation of crane. |
|
Wall Cantilever Jib Crane,
Cranes, Articulating Jib Cranes, Gorbel Jib Cranes, Jib Cranes, Gorbel
Cranes, Hoist,
and Jib Booms from your source for material handling equipment. |
Back to Product Category
|
