Back to Product Category
THE
VERSATILE ELECTRIC WINCH-HOIST
|
1,500
lb Single-Line or 3,000 lb Double-Line Lift |
|
|
 |
|
Order
Online, by Phone, or by E-Mail |
|
|
|
~ Add
items to your online shopping cart ~
Click the Model No. of the item you wish
to purchase. |
|
|
MODEL
520 |
|
|
|
|
|
|
|
 |
|
|
|
| APPLICATIONS |
|
All
Purpose Lifting or Pulling
Longer Duty Cycle Requirements
Jobs Needing Constant Speed Lifting
or Lowering
Special Speed Applications
Commercial Low-Noise Environments |
|
|
|
|
|
|
|
|
|
|
•
Worn gear reduction for positive load
holding.
• Electromagnetic load brake for instant
stopping.
• Rugged construction.
• Low voltage 10 ft. pendant control.
• Full power reversible.
• 50% duty cycle motor.
• Cable tensioner for better cable tracking. |
|
|
|
|
|
|
|
|
|
|
SPECIFICATIONS |
|
|
|
|
|
|
|
Construction
Features:
• Heavy-duty angle base drilled for six (6) 1/2" bolts
(9/16 mounting holes) with no welding required.
• Fully sealed aluminum housings, with precision-cut
gears, run in an oil bath.
• Stress-proof drum shaft
• Frictionless bearings. |
|
Lifting
Capacity:
• 1,500 lbs - 1-2 layers of cable (39 ft of 1/4 cable)
• 1,275 lbs - 3 layers of cable (65 ft of 1/4 cable)
• 900 lbs - full drum of cable (250 ft of 1/4 cable) |
|
|
|
|
|
Pulling
Capacity:
• 10% (6°): 10,000 lbs
• 20% (11°): 5,000 lbs
• 40% (22°): 2,600 lbs |
|
|
|
•
60% (31°): 1,900 lbs
• 80% (39°): 1,600 lbs
• 100% (45°): 1,400 lbs |
|
|
|
|
Gear
System:
• 84:1 total reduction.
• 30:1 worm gear reduction.
• 28:10 chain reduction fro motor to worm hardened
steel worm and forged bronze worm gear holds load
in position when stopped. |
|
|
|
|
|
|
|
|
|
Winch-hoists
are rated for what they will vertically lift. Above
data is based on the total load that may be pulled, single line,
up a given incline. All capacities are reduced 20% to alloy for
minimum friction in pull. |
|
|
|
|
|
Cable
Strength:
• 5-to-1 recommended safety factor.
• Top-quality galvanized cable available in the following
breaking strengths: |
|
|
|
|
| Power: |
|
•
115 Volt, single phase, 60 Hz, 1.5 HP motor
• 14 amp - No-load.
• 17 amp - Full-load. |
|
|
|
|
|
|
1/8
- 2,000 lbs
3/16 - 4,200 lbs |
1/4"
- 7,000 lbs
5/16" - 9,800 lbs |
|
| *Dedicated
30 amp power line required to operate Model 520. |
|
|
|
|
|
|
|
| Speeds: |
|
|
|
|
|
Dimensions: (W" x H" x L")
13" x 11" x 32" |
RPM
does not vary from no-load to full-load use. Line
speed ranges from 12 FPM, first layer, to 17 FPM,
third layer. |
|
|
|
|
|
|
Shipping
Weight: 115 lbs |
|
|
|
|
|
|
|
|
|
|
|
| Duty
Cycle: |
|
|
|
|
|
Factory-Installed
Options: |
| •
50% - 30 min/hour when operating at full load. |
|
|
•
230 Volt
• Chain Reduction Modification
• Alternate Drums
• Limit Switch
• All Weather Protection
• 230 Volt - 3 Phase |
|
|
|
|
| Drum
Storage: |
|
•
1/8 - 1,000 ft.
• 3/16 - 450 ft. |
• 1/4 - 250
ft.
• 5/16 - 150 ft. |
|
|
|
|
|
|
| For
best results, use the minimum amount of cable required for application plus
four safety turns around the drum. Cable sold separately. Length and size
must be specified at time of order. |
|
|
|
|
|
|
 |
|
Electric Winch-Hoist, Hand
Winch-Hoist, Capstan Winch, Electric Winch, Electric Winches, Powered
Winches, Power Winch,
Power Winches, Spur Gear Winch, Thern, Winch, Winch Hoist, and Winches
from your source for material handling equipment. |
Back to Product Category
|
