Back to Product Category
THE
STANDARD HYDRAULIC WINCH-HOIST
|
1,500
lb Single-Line or 3,000 lb Double-Line Lift |
|
|
 |
|
Order
Online, by Phone, or by E-Mail |
|
|
|
~ Add
items to your online shopping cart ~
Click the Model No. of the item you wish
to purchase. |
|
|
|
 |
|
FEATURES |
|
|
|
|
|
|
|
• Worm gear
reduction for positive load holding
• Rugged construction
• Hydraulic power
• High capacity cable drum
• Frictionless bearings
• Full power reversible
• Cable tensioner for better cable tracking |
|
|
|
|
|
|
|
APPLICATIONS |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
• All Purpose Lifting
and Pulling.
• Pulls Loads of Up to 10,000 lbs.
• Where Hydraulic Power Source Is Available.
• On Service and Hauling Trucks. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
SPECIFICATIONS |
|
|
|
|
|
|
Construction
Features:
• Heavy-duty angle base drilled for six (6) 1/2" bolts
(9/16" mounting holes) with no welding required
• Fully sealed aluminum housings, with precision-cut
gears, run in an oil bath
• Stress-proof drum shaft
• Frictionless bearings |
|
Drum
Cycle:
• 25% - 15 min/hr when operating at full load |
|
|
|
|
|
|
|
Drum
Storage:
• 1/8" - 1,000 ft • 1/4"
- 250 ft
• 3/16" - 450 ft • 5/16" - 150 ft |
|
|
|
|
|
|
|
Lifting
Capacity:
• 10% (6°): 10,000 lbs • 60% (31°):
1,900 lbs
• 20% (11°): 5,000 lbs • 80% (39°): 1,600
lbs
• 40% (22°): 2,600 lbs • 100% (45°):
1,400 lbs |
|
|
|
|
|
|
Gear
System:
• 30:1
• Hardened steel worm and forged bronze worm gear
holds load in position when stopped |
|
|
|
|
|
|
|
|
Note: Our winch-hoist are rated for what they will vertically lift.
Above data is based on the total load that may be pulled, single
line, up a given incline. All capacities are reduced 20% to allow
for minimum friction in pull. |
|
|
|
|
|
|
Power:
• High-torque rotary hydraulic motor
• 1/2" - 14 NPTF hydraulic connections |
|
|
|
|
|
|
|
|
Cable
Strength:
• 5 to 1 recommended safety factor
• Top-quality galvanized cable available in the following breaking
strengths:
• 1/8" - 2,000 lbs • 1/4"
- 7,000 lbs
• 3/16" - 4,200 lbs • 5/16" - 9,800
lbs |
|
|
|
|
|
|
Pump
Requirements:
• 2 GPM @ 900 psi minimum pump capacity
• 12 GPM @ 1,500 psi recommended pump capacity
• 2,250 maximum psi |
|
|
|
|
|
|
|
Speeds:
Typical System Operation (12 GPM @ 1,500 psi):
• 17 FPM: No-load drum speed
• 14 FPM: 1,000 lbs - single-line lift
• 10 FPM: 1,500 lbs - double-line lift
Minimum System Operation (2 GPM @900 psi):
• 5 1/2 FPM: No-load drum speed
• 4 1/2 FPM: 1,500 lbs - single-line lift
• 4 FPM: 1,500 lbs. - double-line lift |
|
|
|
|
|
Note: For best results, use the minimum amount of cable required
for application plus four safety turns around the drum. Cable sold
separately. Length and size must be specified at time of order. |
|
|
|
|
|
|
|
Dimensions: (WxHxL)
9" x 9"
x 21" |
|
|
|
|
|
|
|
Shipping
Weight: 60
lbs |
|
|
|
|
|
|
|
Factory-Installed
Options:
• Clutch
• Alternate Drums
• Hydraulic Rope Winch-Hoist |
|
|
Note: All speeds are based on one layer of cable on drum. |
|
|
|
|
|
|
|
|
|
|
|
|
FRONT
VIEW |
|
SIDE VIEW |
|
|
|
|
|
|
|
|
|
|
 |
|
|
 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
TOP VIEW |
|
|
|
|
|
|
|
|
|
|
|
|
 |
|
|
|
Hydraulic Winch-Hoist, Capstan
Winch, Electric Winch, Electric Winches, Powered Winches, Power Winch,
Power
Winches, Spur Gear Winch, Thern, Winch, Winch Hoist, and Winches from
your source for material handling
equipment. |
Back to Product Category
|
