REPLACEMENT PARTS FOR MAGLINE
HAND TRUCKS

FRAMES
hand truck frames
handtruck frames
Straight back.
Our most
popular frame.
Excellent
general purpose
frame for a wide
variety of
package sizes
and use in
most industries.		 Straight back
lattice. A
variation of
our #1 frame
with a vertical
strap to improve
load management
with small
package sizes.		 Curved lattice
back. Curved
polymer cross
braces and a
vertical strap.
Excellent for
managing small
cylinders or pails.		 Straight back
with bolted
molded cross
members.
Similar to our
#1 frame but
with polymer
cross braces.
The polymer
cross braces
are high streight
and exceedingly
impact resistant.
They help
protect against
metal to load
contact and
reduce the
potential for
load damage.		 Curved back
with bolted
molded cross
members. The
curved polymer
cross braces
are specifically
designed to
cradle and provide
stable load
management for
larger cylindrical
loads. High impact
resistance makes
them excellent for
managing heavy
loads like kegs.		 Two straight (top)
and one curved
(bottom) bolted
cross members.
A variation of the
#4 and #5 frames
providing high
impact resistant
polymer cross
braces. Perfect for
managing loads
with a variety of
shaped packages,
specifically
cylinders and
boxes.

STRESS-RESISTANT FRAMES
Heavy-duty frames with wider cross members for
maximum shock absorption and durability.
stress resistant frames for handtrucks
Straight back. Straight lattice back for
transporting smaller
packages – rear mount
for die-cast or recessed
extruded nose plates.

NOSES
noses for handtrucks
Die-cast magnesium
with recessed heel is
14” wide x 7 1/2” deep.		 Die-cast magnesium
with recessed heel is
14” wide, 12” deep.		 Die-cast magnesium with
recessed heel is 18” wide,
71/2” deep.		 Extruded aluminum 14”
wide available with
recessed heel 7 1/2"
deep or flush mount 9"
deep.		 Extruded aluminum
14” wide x 9" deep
(flush mount only).
hand truck noses
Extruded aluminum 18”
wide available with
recessed heel 7 1/2"
deep or flush mount
9" deep.		 Extruded aluminum 18" wide
x 9" deep (flush mount
only).		 Extruded aluminum 16"
wide x 12" deep; 4 1/2"
high (flush mount only).		 Extruded aluminum 20"
wide x 12" deep; 4 1/2"
high (flush mount only).		 High-strength steel
14" wide available
with recessed heel
7 1/2" deep or flush
mount 9" deep.

NOSES (continued)

LOOP HANDLES
handtruck noses
High-strength steel 14" wide
x 9" deep (flush mount
only).		 High-strength steel 18" wide
available with recessed heel
7 1/2" deep or flush mount
9" deep.		 High-strength steel 18" wide x
9" deep (flush mount only).		 Popular “U” loop
handle is
ergonomically
designed to
provide comfort to
the wrist and easy
operation of the
hand truck.

LOOP HANDLES
hand truck loop handles
Basic loop handle with “U”
brace for extra load support.		 52" Vertical loop handle
for use with 1, 2, 4, 6, B
and C frames. 300990
for #5 frame.		 60” vertical loop handle
for use with 1, 2, 4, 6, B and
C frames. 300977 for #5
frame.		 Slightly angled "U" loop
handle (3" high than #11
handle).		 "U" loop handle
with vinyl sleeve
for a comfortable
grip and reduced
user fatigue.

LOOP HANDLES (continued)

SINGLE GRIP HANDLES
hand truck single grip handles
“U” handle with vinyl
sleeve and “U” brace
for higher loads.		 Loop handle with straight
top surface.		 Vertical loop for Hi-U
extension for used with 1, 2,
4, 6, B and C frames. 300995
for #5 frame. (Hi-U available
in 55", 60" and 68" heights).		 52" straight loop with
cross brace and
welded pin handle.		 55" straight loop
with cross brace
and welded pin
handle.

SINGLE GRIP HANDLES (continued)

DOUBLE GRIP HANDLES
handtruck single grip handles
60" straight loop with
cross brace and
welded pin handle.		 52" straight loop handle with
welded pistol grip on top for
easier leverage.		 Vertical loop for No. 5
and F frames - 60"		 52" double vertical loop
provides the operator
a comfortable grip in
various positions. 		55" double
vertical loop
provides the
operator a
comfortable grip
in various
positions.

DOUBLE GRIP HANDLES (continued)
double grip handles for handtrucks
60" double vertical loop
provides the operator
a comfortable grip in
various positions. 		52" welded double grip
handle is angled out to
meet the operator's hands.		 55" bolted dual grip
increased control and offers
multiple hand positions.		 62" bolted dual grip
increased control and
offers multiple hand
positions.		 Bolted dual grip
handle with
vertical post is
62" high and
aids in the
movement of
tall loads.

WHEELS
handtruck wheels
8” mold-on rubber on die-cast
magnesium hub with double-
groove ball bearings. Hard,
puncture-resistant rubber
works well on smooth to
semi-smooth surfaces.		 8” or 10” puncture-resistant,
solid, rubber tire on one-piece
polyolefin hub with double-
groove ball bearings.		 Strong, one-piece polyolefin hub
with 8” or 10” puncture-resistant,
shock-absorbing, non-marking
balloon cushion tires and double-
groove ball bearings.
handtruck casters
8” pneumatic tires with double-
groove ball bearings and three-
piece hub. Pneumatic wheels work
best on uneven and rough
surfaces.		 10” puncture-resistant microcellular
foam tire with semi-precision
double-groove ball bearings –
never goes flat and performs like
a pneumatic tire but doesn’t
require air!		 4 ply rated, pneumatic tube-type
tire with sealed semi-precision
bearings and corrosion-resistant
hub. Excellent shock absorption.

FOLDING NOSES 300 Pound Capacity
folding noses
24” length x 12” wide low-profile
formed plate extension.		 20” length x 12” wide extruded
aluminum channel extension.		 30” length x 12” wide extruded
aluminum channel extension.		 22”x 9” long tubular
aluminum. Requires
special frame.
*Not available with flush mounted noses

ACCESSORY BAGS
handtruck accessory bags
• Overall: 13” long x 8” wide • Overall: 16 1/2” long x 12” wide • Overall: 18” long x 12” wide • Overall 29” long x 12”
  wide
• Main pocket 12” long x 8”
   wide x 2” deep with 1 Velcro
   strap		 • 2 top pockets, sealed with Velcro
  10” long x 6” wide		 • 1 pocket 11” deep x 9” wide
• Holds a 10” high x 20” diameter can • 2 top pockets, sealed
  with Velcro 101/2”
  long x 6” wide
• 1 tool pocket 12” wide x 3 1/2”
  deep		 • 1 tool pocket 12” wide x 31/2” deep
• Outside pocket 5 1/4” long x
  5 1/2” wide		 • Designed to carry food service splits
• Great for vending supplies • 1 tool pocket 12” wide
  x 3 1/2” deep
• Good for hand-held parcel
  computers
• 1 pocket 111/2” wide x
  12” deep
• Ideal for tools and
  cleaning supplies

STAIR CLIMBERS
stair climbers
Order Online, by Phone, or by E-Mail

~ Add items to your online shopping cart ~
Click the Model No. of the item you wish to purchase.
PRICING FOR REPLACEMENT PARTS - Please Note: Minimum Parts Order $40.00
Description Model No. Price
FRAMES
No. 1 straight back
$51.59
No. 1 straight back for recessed folding nose
$51.59
No. 2 straight back with one front-mount vertical strap for flush mount noses*
$66.64
No. 2 straight back with one back-mount vertical strap for flush mount noses
$66.64
No. 4 straight back with molded cross bars
$72.10
No. 5 curved back with molded cross bars
$72.10
No. 6 combination 2 straight molded cross braces on top and 1 curved on bottom
$72.10
No. 7 combination 1 straight molded cross brace on top and 2 curved on bottom
$72.10
A straight back with two vertical straps
$81.72
B straight back with one front-mount strap for flush mount noses
$66.64
B straight back with one front-mount strap for recess mount noses
$66.64
C stress resistant without vertical strap
$58.80
D stress resistant with vertical strap for flush mount noses
$65.80
D stress resistant with vertical strap for front mount noses
$65.80
F curved molded cross braces with vertical strap
$80.01
H straight molded cross braces with vertical strap
$80.01
FRAME COMPONENTS
Side channel for No. 1, 2 and A frames
$20.13
Side channel for Nos. 4, 5, 6, 7, H and F frames
$20.13
Side channel reinforcement (2 required per hand truck)
$3.85
Cross brace for No. 1, 2, A and B frames
$3.95
Cross brace for Nos. 5, 6, 7 and F frames - curved
$12.39
Cross brace for No. 4, 6, 7 and H frames - straight
$12.38
Vertical strap for No. 2, A, F and H frames
$7.90
*To order a straight back frame with a front-mount vertical strap for recess mount noses, please order #300005 (B Frame)
Order Online, by Phone, or by E-Mail

~ Add items to your online shopping cart ~
Click the Model No. of the item you wish to purchase.
Description Model No. Price
HANDLES
No. 11 standard U
$18.90
No. 12 standard U with U brace
$26.88
No. 13A straight loop with cross brace and single pin - 52"
$35.46
No. 13B straight loop with cross brace and single pin - 55"
$35.46
No. 13C straight loop with cross brace and single pin - 60"
$35.46
No. 14 straight loop with top pistol grip and curved cross brace
$97.29
No. 15A vertical loop for #1, 2, B, 4, 6, 7, C, H and D frames - 52"
$44.13
No. 15A vertical loop 52" for #5 and F frame
$44.13
No. 15C vertical loop for #1, 2, B, 4, 6, 7, C, H and D frames - 60"
$56.97
No. 15C high vertical loop 60" for #5 and F frames
$56.97
No. 15C vertical loop for No. 5 and F frames - 60"
$27.93
No. 17 straight loop with pistol grip
$26.88
No. 18 standard U with 18 degree bend (3" higher than No. 11)
$30.76
No. 19 standard U loop with vinyl sleeve
$29.62
No. 22 standard U loop handle with vinyl sleeve and U brace
$37.59
No. 24 U loop handle with straight top surface
$19.45
No. 25A double vertical loop 55"
$38.43
No. 25B double vertical loop 55"
$40.03
No. 25C double vertical loop 60"
$41.85
No. 30 welded double pistol grip 52"
$39.27
No. 35B bolted double loop grip (58" total height)
$38.74
No. 35D bolted double loop 62"
$41.47
No. 36 bolted double loop with vertical post - 62" (65" total height)
$46.17
No. 60 U vertical loop for Hi-U extensions for No. 1,2,B,4,6, 7, C, H and D frames
$71.16
No. 60 U vertical loop for Hi-U extensions for No. 5 and F frames
$71.16
HANDLE COMPONENTS
No. 16 double grip assembly, RH, complete with plastic grip
$11.84
No. 16 double grip assembly, LH, complete with plastic grip
$11.84
Universal U brace for No. 12, 16 and 22 handles
$7.98
Plastic handle grip - 5" (black)
$4.63
Description Model No. Price
NOSES
AM die cast magnesium - 14" x 7-1/2"
$45.50
HM die cast magnesium - 14" x 12"
$93.65
UM die cast magnesium - 18" x 7-1/2"
$53.06
E1 extruded aluminum with cutouts - 14" x 7-1/2" recessed
$43.67
E1 extruded aluminum with cutouts - 14" x 9" flush mount
$43.67
E2 extruded aluminum without cutouts - 14" x 9", flush mount only
$43.67
G1 extruded aluminum with cutouts - 18" x 7-1/2" recessed
$52.33
G1 extruded aluminum with cutouts - 18" x 9" flush mount
$52.33
G2 Extruded aluminum without cutouts - 18" x 9", flush mount only
$52.33
E3 steel with cutouts - 14" x 7-1/2" recessed; 14" x 9" flush mount
$60.91
E4 steel without cutouts - 14" x 9", flush mount only
$60.91
G3 steel with cutouts - 18" x 7-1/2" recessed; 18" x 9" flush mount
$69.87
G4 steel without cutouts - 18" x 9", flush mount only
$69.87
K1 extruded aluminum - 16" x 12", flush mount only
$70.25
K1 extruded aluminum with cutouts and mounting bracket kit (mounting brackets and hardware)
$83.16
K2 extruded aluminum - 20" x 12", flush mount only
$77.39
NOTE: E, G and K series noses require mounting brackets 86029 for standard trucks and 860941 for narrow aisle trucks.
Order Online, by Phone, or by E-Mail

~ Add items to your online shopping cart ~
Click the Model No. of the item you wish to purchase.
Description Model No. Price
HARDWARE, FASTENERS, MISCELLANEOUS ITEMS
Handle screw 1/4"-20 x 1-1/2" for basic handles No. 11, 13A, 17, 19, etc.)
$0.35
Handle screw 1/4"-20 x 1-3/4" for No. 12, 16 and 22 handles and No. 11, 19, 24, 28 handles
+ Hi-U ext
$0.83
Handle screw 1/4"-20 x 1-7/8" No. 12, 16 and 22 handles + Hi-U ext
$1.12
AM, UM and HM nose bolt pack [includes (4) 5/16"-18 x 2"-1/4" bolts and
(4) 5/16"-18 nylon lock nuts]
$1.90
Mounting bracket kit for E, G and K series (2 brackets, nuts and bolts) - standard hand truck only
$12.91
Hardware pack (includes nose mounting bolts and lock nuts for E and G series noses)
$1.97
Wheel bracket - RH (standard hand truck)
$6.86
Wheel bracket - LH (standard hand truck)
$6.86
F2 and F3 hardware pack for standard hand truck (includes hinges, brackets and hardware)
$8.65
C1 and C5 stair climber fastener pack for standard hand truck
$4.10
Cotter pin for axle (pack of 50)
$2.97
Fastener pack #1 for all models except those with 815 wheels (includes 25 packs of handle and nose bolts, nuts, axle cotter keys, roll pins and washers)
$138.60
Fastener pack #2 for models with 815 wheels
$8.27
Completion pack #1 (all hardware and fastener pack #1) for standard hand truck -
all wheels except 815
$35.98
Completion pack #2 for standard hand truck with 815 wheels (all hardware and fastener pack #2)
$35.98
Blind rivet for frame cross bar - 3/16" x .433"
$0.38
Screw for molded cross brace (No. 4, 5, 6, 7, F or H frames) - 1/4"-20 x 3/4" (2 required)
$0.92
Flanged locknut for 80226 screw (2 required)
$0.35
L frame hinge for F2 and F3 folding noses
$2.97
Z nose hinge for F2 and F3 folding noses
$4.26
Washer, cone for F2 and F3 (5/16" spherical washer) (pack of 10)
$0.46
F1 folding nose hinge
$6.61
F1 folding nose bracket
$44.81
Hand truck bag (standard hand trucks and Gemini)
$1.68
Folding nose kit without locking rod for E and G series noses or T extruded nose
$64.86
Folding nose kit with locking rod for E and G series noses or T extruded nose
$71.69
Order Online, by Phone, or by E-Mail

~ Add items to your online shopping cart ~
Click the Model No. of the item you wish to purchase.
Description Model No. Price
COMPLETE WHEEL (price is per each wheel)
815 mold-on rubber with premium sealed red ball bearings - 8"
$27.93
825 solid rubber with premium sealed red ball bearings - 8"
$32.65
830 balloon cushion with premium sealed red ball bearings - 8"
$37.14
850 pneumatic with premium sealed red ball bearings - 8"
$49.90
1010 microcellular foam with premium sealed red ball bearings - 10"
$65.59
1025 solid rubber with premium sealed red ball bearings - 10"
$31.64
1030 balloon cushion with premium sealed red ball bearings - 10"
$37.83
1060 4-ply pneumatic tube-type with premium sealed red ball bearings - 10"
$41.30
BULK WHEELS
815 Bulk (425 pieces)
$11,292.40
1010 Bulk (150 pieces)
$7,462.92
1030 Bulk (290 pieces)
$9,659.33
1060 Bulk (200 pieces)
$6,979.00
WHEEL COMPONENTS
1060 tire only
$27.80
1060 tube only
$13.65
1060 wheel only (includes hub, rims and bearings)
$18.30
Premium semi-precision sealed ball bearings - red (2 per wheel required)
$2.44
850 tube only
$10.56
AXLES
Axle kit - 16-13/16" for 815 wheels only
$11.02
Axle kit - 18" axle for all wheels except 815
$11.02
Axle kit, stress proof - 16-13/16" for 815 wheels
$18.20
Axle kit, stress proof - 18" for all wheels except 815
$18.20
AXLE COMPONENTS
Axle hardware (pack of 2 cotter pins and 2 roller pins)
$0.91
Washer - 5/8" x 1/32" (thin)
$0.21
Washer - 5/8" x 3/32" (thick) (pack of 50)
$10.50
Order Online, by Phone, or by E-Mail

~ Add items to your online shopping cart ~
Click the Model No. of the item you wish to purchase.
Description Model No. Price
ACCESSORIES
C1 stair climber kit for standard hand truck (2 stair climbers with hardware)
$46.76
C5 stair climber for standard hand truck
$46.76
Wear strip for C5 stair climber for standard hand truck (each)(1" wide for #302098)
$5.17
F1 folding nose - 24" (plate type)
$84.84
F2 folding nose - 20" (channel type)
$62.89
F3 folding nose - 30" (channel type)
$67.97
Recessed folding nose - 22" tubular [requires 1 cross brace (not included) to be chang
$56.73
Velcro kit for recessed folding nose
$20.73
4th wheel attachment
$262.11
Wheel guard, universal - 8-1/2" x 2-1/2" (mounts on wheel bracket)(per each)
$13.15
Wheel guard kit, universal - 8-1/2" x 2-1/2" (mounts on wheel bracket)(kit is for pair;
includes hardware)
$24.00
Wheel guard kit, mounts on frame - 9-3/4" x 3-3/4" (kit is for pair - includes hardware)
$24.61
Hi-U 52" frame extension only
$16.86
Hi-U 55" frame extension only
$25.06
Hi-U 60" frame extension only
$26.28
Hi-U 62" frame extension only
$27.50
Hi-U 68" frame extension only
$29.92
Hi-U frame pad and cover
$36.30
Garment hanger hook includes 52" Hi-U frame extension
$28.41
Garment hanger hook only
$11.55
Stationary keg hook (for No. 5, 6 and F frames only)
$36.08
Keg hook - 4" (sliding hook for straight wall kegs)
$20.58
Keg hook - 5" (sliding hook for barrel shaped kegs)
$25.30
Keg hook kit - 4" (sliding hook for straight wall kegs)
$77.32
Keg hook kit - 5" (sliding hook for barrel shaped kegs)
$80.12
Accessory bag - 13" long x 8" wide (used for hand held computers)
$36.92
Accessory bag - 16-1/2" long x 12" wide (used for holding cleaning supplies)
$45.95
Accessory bag - 18" long x 12" wide (used for food service to hold splits)
$45.95
Accessory bag - 29" long x 12" wide (used for holding cleaning supplies)
$62.73
Side rail cap
$0.77
*Not available with flush mounted noses
Magline Hand Trucks, Carts, Hand Trucks, 2 Wheel Dollies, Aluminum Hand Trucks, Luggage Trolleys, Luggage
Trucks, Magliner, and Stair Climbing Hand Trucks from your source for material handling equipment.