Gilmore-Kramer Company Material Handling Equipment - 1-800-544-3137 - Service - Installation - Custom Fabrication
Home Order Search Quote Info About Us My Account Shopping Cart
    Categories
Back to Product Category

SERIES 4HPFC

HELICAL/PARALLEL GEAR POWER WINCHES WITH CLUTCH

helical parallel gear power winches with clutch Up to 15,000 lb capacity
Helical/parallel gearing provides efficiency required for
   applications involving quick line speeds or long travel
   distances.
Standard features include TEFC severe duty brakemotors,
   enclosed gearing, flange style roller bearings, and 2-year
   limited warranty.
Custom modifications including grooved drums, special
    drum lengths and diameters, limit switches, roller
    pressure bars, and special finishes are also available,
    please contact us. Pneumatic, hydraulic and alternate
    motor voltages are also available.
Manually operated jaw clutch allows you to disengage
the drum for rapid payout of wire rope when not under
load. An adjustable drag brake on the drum prevents
overspooling during payout. Clutch units are for
horizontal pulling only.
Please order wire rope and controls separately.
(See bottom of page)

Order Online, by Phone, or by E-Mail

~ Add items to your online shopping cart ~
Click the Model No. of the item you wish to purchase.

SERIES 4HPFC ELECT. - PRICING, CONFIGURATIONS AND PERFORMANCE CHARACTERISTICS
When ordering, please indicate Model Number and Extensions (examples: 4HPF9MC-9000-20-D; 4HPF9MC-9000-40-E)
Model
number
Model number ext. Motor
hp
Load rating (lb) Wire
rope dia.
(in)
Line speed (fpm) Drum capacity (ft)¹ Approx.
ship
wt. (lb)
Price²
1st
layer
Mid
drum
Full
drum
230/460
3 phase
Load
rating
Line
speed
Motor
codes
1st
layer
Mid
drum
Full
drum
1st
layer
Full
drum
4HPF2MC 2000 20 D, E, F 1 2100 1300 1000 5/16 17 38 34 250 560 265
$6,700
4HPF2MC 2000 35 D, E, F 2 2100 1300 1000 5/16 34 75 34 250 560 295
$7,030
4HPF3MC 3000 20 D, E, F 1.5 3300 2300 1800 3/8 17 60 33 160 360 275
$8,540
4HPF3MC 3000 35 D, E, F 3 3300 2300 1800 3/8 34 61 33 160 360 295
$8,934
4HPF5MC 5000 20 D, E, F 3 5000 3100 2300 1/2 21 45 52 400 890 545
$11,802
4HPF5MC 5000 35 D, E, F 5 5000 3100 2300 1/2 36 80 52 400 890 545
$11,941
4HPF7MC 7000 25 D, E, F 5 7300 5400 4300 5/8 25 42 51 230 510 700
$14,467
4HPF7MC 7000 35 D, E, F 7.5 7300 5400 4300 5/8 36 61 51 230 510 755
$15,215
4HPF9MC 9000 20 D, E, F 5 9000 6500 5100 3/4 21 37 65 310 700 1245
$21,421
4HPF9MC 9000 40 D, E, F 10 9000 6500 5100 3/4 41 73 65 310 700 1360
$23,083
4HPF15MC 15000 20 D, E, F 10 15,100 11,500 9300 7/8 22 36 57 210 480 1580
$29,948
4HPF15MC 15000 35 D, E, F 15 15,200 11,600 9400 7/8 35 57 57 210 480 1620
$31,408
Motor codes ¹ Actual drum capacities 25-30% less, due to nonuniform winding. Wire rope tension
will also affect drum capacity.
D 230 volt 3 phase
E 460 volt 3 phase
F All other voltages - please contact us
² Please contact us for firm fixed price and delivery.
WINCH DIMENSIONS
gear power winches
SERIES 4HPFC- WINCH DIMENSIONS (in)
Model extension A B C D E F G H J K L M N P S (hole dia.) V
4HPF2MC-2000-20 38.50 17.00 7.56 8.00 2.38 0.88 19.88 16.00 1.00 10.00 20.00 22.56 0.62 15.75 0.59 -
4HPF2MC-2000-35 40.00 17.00 7.56 8.00 2.38 0.88 19.88 17.00 1.00 10.00 20.00 22.56 0.62 15.75 0.59 -
4HPF3MC-3000-20 40.75 17.00 7.56 8.00 2.38 0.88 19.88 18.25 1.00 10.00 20.00 22.56 0.62 15.75 0.59 -
4HPF3MC-3000-35 42.75 17.00 7.56 8.00 2.38 0.88 19.88 18.25 1.00 10.00 20.00 22.56 0.62 15.75 0.59 -
4HPF5MC-5000-20 55.00 26.00 11.50 12.00 5.12 - 22.25 24.25 1.00 15.25 30.50 33.38 1.00 24.00 0.88 -
4HPF5MC-5000-35 55.00 26.00 11.50 12.00 5.12 - 22.25 24.25 1.00 15.25 30.50 33.38 1.00 24.00 0.88 -
4HPF7MC-7000-25 55.75 26.00 11.50 12.00 5.12 - 22.25 27.00 1.00 15.25 30.50 33.38 1.00 24.00 0.88 -
4HPF7MC-7000-40 58.50 26.00 11.50 12.00 5.12 - 22.25 27.00 1.00 15.25 30.50 33.38 1.00 24.00 0.88 -
4HPF9MC-9000-20 66.00 31.00 14.50 14.50 6.25 - 22.00 32.00 1.25 13.25 26.50 43.50 1.12 28.75 1.12 39.75
4HPF9MC-9000-40 71.00 31.00 14.50 14.50 6.25 - 22.00 32.00 1.25 13.25 26.50 43.50 1.12 28.75 1.12 39.75
4HPF15MC-15000-25 72.25 31.00 14.50 14.50 6.25 - 22.00 34.88 1.25 13.25 26.50 43.50 1.12 28.75 1.12 39.75
4HPF15MC-15000-35 74.50 31.00 14.50 14.50 6.25 - 22.00 34.88 1.25 13.25 26.50 43.50 1.12 28.75 1.12 39.75
Dimensions are for reference only and subject to change without notice. Please contact us for exact dimensions.
DRUM DIMENSIONS
Important: It is the owner's or operator's
responsibility to determine the suitability of the
equipment to its intended use. Study all
applicable codes, manuals, and regulations. Be
sure to read the Owner's Manual supplied with
the equipment before operating it.
drum dimensions
SERIES 4HPFC - DRUM DIMENSIONS
Series Drum dia. Flange dia. Drum width Fleet angle distance4
4HPF2MC 4.50 in 12.00 in 10.00 in 15.9 ft
4HPF3MC 5.50 in 12.00 in 10.00 in 15.9 ft
4HPF5MC 7.00 in 18.00 in 16.00 in 25.4 ft
4HPF7MC 9.00 in 18.00 in 16.00 in 25.4 ft
4HPF9MC 10.75 in 22.00 in 20.00 in 31.8 ft
4HPF15MC 11.50 in 22.00 in 20.00 in 31.8 ft
Dimensions are for reference only and subject to change without notice. Please contact us for exact dimensions.
4 Recommended minimum distance between drum and lead sheave for smooth drum.

ELECTRIC MOTOR CONTROLS
electric motor controls
Single Speed Reversing Magnetic Controls for
1 and 3 phase motors up to 40 hp
UL, IEC, or CSA Recognized components throughout.
Steel Enclosure NEMA 4 rated (watertight) keeps dirt
   and water out. Approved for most outdoor applications.
Pendant Control Switch NEMA 4X rated (watertight),
   on 50 foot cord, allows operator to stand away from winch
   during operation. Pendant control is operated with momen-
   tary contact-type push buttons. Cord lengths of less than
   50 feet are available, please specify when ordering.
Reversing Contactor is electrically and mechanically
   interlocked to deliver smooth reversing control.
When ordering please include the following:
voltage and phase required, motor horsepower,
pendant control cord length - up to 50 ft., and
pendant control labeling - For/Rev or Up/Down.
Thermal Overload Relay trips power OFF to protect
   motor from overheating. Switch is manually reset.
Fused Control Circuit powers pendant with 115 volt,
   2 amp current to help protect against high voltage shocks.
Wiring Diagram is supplied inside enclosure.
OPTIONS Steel Mounting Bracket secures control box to winch.
Special current or horsepower ratings, special
rated enclosures for explosive or harsh
environments, soft start or soft stop controls,
variable speed or multispeed controls, torque
limiting controls, selector switches, power cord
disconnects, and various panel mounted controls
or pilot lights.
Variable Frequency Drives
Variable frequency drive controls are available to provide
   accurate positioning of loads, soft starts and soft stops, and
   overload protection.
For 3 phase 230 VAC and 460 VAC motors from 1 to 5 hp.
For 3 phase 230 VAC motors from 1 to 30 hp.
For 3 phase 460 VAC motors from 1 to 60 hp.

Order Online, by Phone, or by E-Mail

~ Add items to your online shopping cart ~
Click the Model No. of the item you wish to purchase.

PRICING FOR SERIES EL - ELECTRIC MOTOR CONTROLS
Starters listed include NEMA 4 rated pendant control on 50 foot cord.
Please specify voltage, phase, and motor hp when ordering. Contact us for required voltages and options.
Model
Number
Maximum rated motor horsepower for power supply current Approx.
ship wt.
Price
115/1/60 230/1/60 208/3/60 230/3/60 460/3/60
10S2A4 to 1.5 hp - - - - 25 lb
$1,634
10S3B4 - to 3 hp - - - 25 lb
$1,591
10S3C4 - - to 3 hp - - 25 lb
$1,344
10S3D4 - - - to 3 hp - 25 lb
$1,236
10S7E4 - - - - to 7.5 hp 25 lb
$1,226

WIRE ROPE
How to Order Wire Rope
The breaking strength of new wire rope should be 5 times the size of the
largest load for lifting applications, and 3 times the size of the largest load
for pulling applications. Contact a reputable wire rope supplier for more
information.
Breaking Strength of New Wire Rope (lb)
wire rope diameter   7x19 Galvanized Aircraft Cable 304 Stainless Steel wire rope
1/8 in -0.13 2,000 1,760
3/16 in -0.19 4,200 3,700
1/4 in -0.25 7,000 6,400
5/16 in -0.31 9,800 9,000
3/8 in -0.38 14,400 12,000
Values shown are for reference only. When selecting a wire rope, use the breaking strength specified by the rope manufacturer.
Breaking Strength of New Wire Rope (lb)
wire rope diameter   6 x 37 IWRC IPS
(Improved Plow Steel) wire rope
6 x 37 IWRC EIPS
(Extra Improved Plow Steel) wire rope
3/8 in -0.38 12,400 15,100
7/16 in -0.44 16,500 20,400
1/2 in -0.50 23,000 26,600
9/16 in -0.56 29,000 33,600
5/8 in -0.63 35,800 41,200
3/4 in -0.75 51,200 58,800
7/8 in -0.88 69,200 79,600
1 in -1.00 89,800 103,400
1-1/8 in -1.13 113,000 130,000
1-1/4 in -1.25 138,800 159,800
1-1/2 in -1.50 197,800 228,000
Values shown are for reference only. When selecting a wire rope, use the breaking strength specified by the rope manufacturer.

Order Online, by Phone, or by E-Mail

~ Add items to your online shopping cart ~
Click the Model No. of the item you wish to purchase.

PRICING FOR WIRE ROPE
Model No. Wire Rope Diameter and Length Approx.
Ship Weight
Price
Galvanized Aircraft with Swivel Hook and Swagged Ball Fitting
WA19-20NS 3/16 in x 20 ft 3 lb
$108
WA19-28NS 3/16 in x 28 ft 4 lb
$113
WA19-36NS 3/16 in x 36 ft 4 lb
$118
WA19-45NS 3/16 in x 45 ft 7 lb
$140
WA25-20NS 1/4 in x 20 ft 4 lb
$118
WA25-28NS 1/4 in x 28 ft 5 lb
$124
WA25-36NS 1/4 in x 36 ft 6 lb
$134
WA25-45NS 1/4 in x 45 ft 7 lb
$156
WA25-60NS 1/4 in x 60 ft 9 lb
$172
WA25-75NS 1/4 in x 75 ft 11 lb
$204
Galvanized Aircraft Cable with Swivel Hook and Unfinished End
WA31-20DS 5/16 in x 20 ft 6 lb
$151
WA31-28DS 5/16 in x 28 ft 7 lb
$172
WA31-36DS 5/16 in x 36 ft 8 lb
$183
WA31-45DS 5/16 in x 45 ft 10 lb
$199
WA31-60DS 5/16 in x 60 ft 12 lb
$210
WA31-75DS 5/16 in x 75 ft 15 lb
$220
Galvanized Aircraft Cable with Swivel Hook and Unfinished End
WA38-28DS 3/8 in x 28 ft. 8 lb
$392
WA38-36DS 3/8 in x 36 ft 10 lb
$430
WA38-45DS 3/8 in x 45 ft 11 lb
$468
WA38-60DS 3/8 in x 60 ft 14 lb
$532
WA38-75DS 3/8 in x 75 ft 17 lb
$607
304 Stainless Steel Wire Rope with SS Swivel Hook and Swagged Ball Fitting
3/16 in x 20 ft 3 lb
$194
3/16 in x 28 ft 3 lb
$204
3/16 in x 36 ft 4 lb
$215
3/16 in x 45 ft 7 lb
$231
3/16 in x 60 ft 9 lb
$258
3/16 in x 75 ft 11 lb
$296
  304Stainless Steel Wire Rope with SS Swivel Hook and Swagged Ball Fitting
1/4 in x 20 ft 5 lb
$258
1/4 in x 28 ft 5 lb
$274
1/4 in x 36 ft 6 lb
$285
1/4 in x 45 ft 7 lb
$339
1/4 in x 60 ft 9 lb
$398
1/4 in x 75 ft 11 lb
$441
304 Stainless Steel Wire Rope with SS Swivel Hook and Unfinished End
5/16 in x 20 ft 6 lb
$355
5/16 in x 28 ft 7 lb
$371
5/16 in x 36 ft 9 lb
$387
5/16 in x 45 ft 11 lb
$419
5/16 in x 60 ft 14 lb
$457
5/16 in x 75 ft 17 lb
$505
304 Stainless Steel Wire Rope with SS Swivel Hook and Unfinished End
WS38-28DS 3/8 in x 28 ft. 8 lb
$425
WS38-36DS 3/8 in x 36 ft 10 lb
$457
WS38-45DS 3/8 in x 45 ft 11 lb
$489
WS38-60DS 3/8 in x 60 ft 14 lb
$559
WS38-75DS 3/8 in x 75 ft 17 lb
$624
Helical-Parallel Gear Power Winches with Clutch, Capstan Winch, Electric Winch, Electric Winches, Powered
Winches, Power Winch, Power Winches, Spur Gear Winch, Thern, Winch, Winch Hoist, and Winches from your
source for material handling equipment.

Back to Product Category
Home - Order - Search - Quote- Info - About Us - My Account - Shopping Cart