Back to Product Category
SBC
SERIES CLEAN ROOM BALANCER
|
|
 |
|
 |
|
|
|
|
|
The
SBC-15 is a "clean room" tool balancer used in production of electronics,
pharmaceuticals, and other environmentally sensitive components. Its specially
sealed aluminum case provides a Class 10 protection rating which meets most
clean room requirements. The cable is sheathed in nylon to prevent metal
flaking
and contamination of the clean environment. It can be used with a multitude
of
tools including torque drivers and vacuum pin setters. Like the EKN series,
these
balancers can be fitted with a grounding wire to dissipate static electricity. |
|
|
|
|
|
|
Exclusive
18 Month Warranty |
|
|
 |
|
Order
Online, by Phone, or by E-Mail |
|
|
|
~ Add
items to your online shopping cart ~
Click the Model No. of the item you wish
to purchase. |
|
|
PRICE |
| Model No. |
Capacity Range (lb) |
Cable Travel (ft) |
Cable Dia. (in) |
Wt (lb) |
PRICES |
| SBC-15 |
1.1 to 3.3 |
3.28 |
0.12 |
2.6 |
$1,444.00 |
|
|
Features
and Benefits |
|
Advantages
of Using an ENDO Spring Balancer: |
ENDO
Spring Balancers are a valuable addition to your
assembly line. They support heavy tools with cable tension
equal to the weight of the suspended tools, which makes
them seem virtually "weightless". As the tool is repositioned
the balancer extends or retracts the support cable to follow
the tool's movements. Constant tension on the cable is
accomplished with a spring motor and a tapered drum.
The assembler has the flexibility to reposition the tool, while
experiencing comfortable operation and less fatigue. Similar
to a Balancer is the Retractor, which does not have a
tapered drum. The tension on the cable increases as the
cable is extended |
• Suspend
tools in assembly lines or other work areas
• Help the assembler with repetitive tasks such as
installing fasteners: screws, nuts, bolts, etc.
• Hold fixtures, tools, welding guns, and similar
equipment
• Improves efficiency and diminishes worker fatigue
• Stabilizes tool positioning and contributes to work
accuracy
• Contributes to a safer working environment
• Keeps fixtures, tools, and welding guns off of the floor
and clean.
• Eliminates the need to separately power the balancer |
|
|
|
Application
Guidelines |
•
Size the balancer to carry the total weight to be balanced - tool plus all
accessories - and stroke (maximum to
minimum height) required.
• Size to the upper end of the capacity range of the balancer when
possible.
• Always attach secondary support cable(s) to the eyelet provided for
additional safety.
• Balancers are normally hung vertically and the rope is pulled out
vertically. To prevent the rope from wearing on the
guide, the rope should not be pulled out at an angle to the
balancer body. The balancer can also be mounted
horizontally, however a pulley system must be employed to guide
the rope straight out of the balancer then down to
the tool. Again, care must be taken to prevent the rope from
wearing on the guide. A trolley and rail system can be
used to help the balancer adjust to changing angles.
• If multiple balancers are used in close together, install them at
staggered heights to keep them from hitting each other
• The spring tension is factory preset to the mid-range of the rated
capacity. To adjust the tension turn the worm gear
or spindle clockwise to increase the tension and counterclockwise
to decrease the tension. |
|
|
|
Clean Room Balancer, Clean
Room Tool Balancer, Cleanroom Spring Balancer, Clean Room Retractor, Clean
Room
Tool Positioner, Spring Retractor, Tool Balancer, Spring Balancer, and
Cleanroom Torque Reel from your source for
material handling equipment. |
Back to Product Category
|
