Gilmore-Kramer Company Material Handling Equipment - 1-800-544-3137 - Service - Installation - Custom Fabrication
Home Order Search Quote Info About Us My Account Shopping Cart
    Categories
Back to Product Category

RUBBER STAIR TREAD SYSTEMS WITH
DESIGN PATTERNS

MODEL #620D Diamond Pattern Treads
Square nose diamond design
Length: 36" to 72"
Depth: 12-1/16" nominal from inside of nose
Thickness: 3/16" tapering to 1/8"
Nose length: 1-9/16"
Nose Thickness: 1/8"
Tapered Nose: Yes
Adjustable Nose: Yes
Round nose diamond design
Length: 36" to 72"
Depth: 12-5/16" nominal from inside of nose
Thickness: 1/4" tapering to 3/16"
Nose length: 1-3/8"
Nose Thickness: 7/64"
Tapered Nose: No
Adjustable Nose: No
Install with #400 Neoprene Contact Adhesive or #560
Rubber Flooring Adhesive; use #110 Epoxy Nose
Caulk for longer wear and added safety.
Improve appearance, add safety and durability, lessen
traffic noise in universities, schools, hospitals, banks,
theatres, hotels, airports, restaurants, factories, malls;
all heavily travelled stairways.

See Below for Color Chart, Adhesives, and Installation instructions

Order Online, by Phone, or by E-Mail

~ Add items to your online shopping cart ~
Click the Model No. of the item you wish to purchase.


PRICE FOR #620D
Model No. Std. Length Approx. Wt. Ea. Price Per Tread (ea)
36"
7.0 lbs
$71.25
42"
8.2 lbs
$83.15
48"
9.3 lbs
$95.00
54"
10.5 lbs
$106.90
60"
11.7 lbs
$118.75
72"
14.0 lbs
$142.50

MODEL #820R - Low Profile Raised Disc Pattern Treads
SPECIFICATIONS:
Length: 36" to 72"
Depth: 12-1/2" nominal from inside of nose.
Thickness: 3/16" tapering to 1/8" nominal
Nose length: 1-9/16" nominal
Nose Thickness: 9/64"
Tapered Nose: No
Adjustable Nose: No
Install with #400 Neoprene Contact Adhesive or #560
Rubber Flooring Adhesive; use #110 Epoxy Nose Caulk
for longer wear and added safety.
Adds safety and durability, lessens traffic noise and offers
ease of cleaning on stairways in clubs, apartments,
churches, motels, stores, institutions, medical offices,
bowling lanes and factories.
See Below for Color Chart, Adhesives, and Installation instructions

Order Online, by Phone, or by E-Mail

~ Add items to your online shopping cart ~
Click the Model No. of the item you wish to purchase.


PRICE FOR MODEL #820R
Model No. Std. Length Approx. Wt. Per Tread Per Tread Price (ea)
36"
4.5 lbs
$70.80
42"
5.25 lbs
$82.60
48"
6.0 lbs
$94.40
54"
6.75 lbs
$106.20
60"
7.5 lbs
$118.00
72"
9.0 lbs
$141.60

MODEL #520S - Square Pattern Treads
SPECIFICATIONS:
Raised square design
Length: 36" to 72"
Depth: 12 - 5/16" nominal from inside of nose.
Thickness: 1/4" tapering to 1/8"
Nose length: 1 - 9/16"
Nose Thickness: 1/4"
Tapered Nose: No
Adjustable Nose: No
Install with #400 Neoprene Contact or #560
Rubber Flooring adhesive. Improve appearance,
add safety and durability to commercial, industrial
or institutional stairways. For universities, schools,
hospitals, banks, theatres, hotels, factories, airports,
restaurants, shopping malls; all heavily traveled
public stairways.

See Below for Color Chart, Adhesives, and Installation instructions

Order Online, by Phone, or by E-Mail

~ Add items to your online shopping cart ~
Click the Model No. of the item you wish to purchase.


PRICE FOR MODEL #520S
Model No. Std. Length Approx. Wt. Per Tread Per Tread Price (ea)
36"
6.60 lbs
$97.45
42"
7.70 lbs
$113.70
48"
8.80 lbs
$129.90
54"
9.90 lbs
$146.15
61"
11.0 lbs
$162.40
72"
13.20 lbs
$194.90

AVAILABLE SOLID COLORS

AVAILABLE MARBLEIZED COLORS

Order Online, by Phone, or by E-Mail

~ Add items to your online shopping cart ~
Click the Model No. of the item you wish to purchase.


ADHESIVES
We carry a complete line of adhesives and nose caulks for installation of our stair treads, risers and tile.
Rubber and vinyl stair treads and cove risers can be installed with our No. RCM510 Acrylic Adhesive,
No. 400 Neoprene Contact Adhesive or No. 300 Water-Based Contact Adhesive (No. 630D Rubber
Outdoor Treads must be installed with our No. 775 Epoxy Adhesive). Landing tiles can be installed with
our RCM510 Acrylic Adhesive or No. 775 Epoxy Adhesive
#400 Neoprene Contact Adhesive
Model No. Size Std. Ctn Approx. Wt. (ea) Price (Std. Carton)
400-1 qt 1 qt. Cans 12 2 lbs.
$553.80
400-1 gal 1 gal. Cans 4 0.5 lbs
$530.60
400-5 gal *5 gal. Pail 1 40.0 lbs.
$595.45
Broken Carton Charge $5.00.
*5 gal. pails cannot ship via UPS or FedEx.

Order Online, by Phone, or by E-Mail

~ Add items to your online shopping cart ~
Click the Model No. of the item you wish to purchase.


#110 Epoxy Nose Caulk
Vinyl treads for commercial applications should also be installed using our No. 110 Epoxy Nose Caulk
with our ECD18 or ECD26 Dual-Cartridge Dispenser
110-DUAL Dual-Cartridge price - $72.25 each (wt. approx 2.5 lbs.)
ECD-26 Deluxe Dispenser - $169.00 each (wt. approx 5 lbs.)
ECD-18 Standard Dispenser - $136.00 each (wt. approx 5 lbs.)

#775AB Epoxy Flooring Adhesive - Environmentally Friendly
The only recommended adhesive for use with Disc-O-Tile. May be used with other rubber stair treads, tile and flooring.
Because of flame spread properties, other adhesives will not bond Disc-O-Tile to the floor. A two-part solvent-free
adhesive; contains 1 can Part A 1 can Part B, and a stirring paddle. Covers approximately 150 square feet per unit.
Model No. Size Std. Ctn Approx. Wt. (per unit) Price (Unit)
775 1 unit 1 unit (parts A & B) 12 lbs. $298.80

Order Online, by Phone, or by E-Mail

~ Add items to your online shopping cart ~
Click the Model No. of the item you wish to purchase.


#560 Rubber Flooring Adhesive - Environmentally Friendly
For installing Rubber Floor Tiles or Rolls over suitable on-grade dry concrete floors, suspended concrete floors, or
suspended wood floors. May also be used with sanded back molded rubber stair treads. Not recommended where
excessive moisture exists; Non-Carcinogenic; Non-Toxic; safe for the environment and freeze thaw stable. See label
for complete instructions. Ready to trowel in 1 gallon or 4 gallon cans. Covers 150 square feet per gallon.

Model No. Size Std. Ctn Approx. Wt. (ea) Price (Std. Carton)
560-1 gal 1 gal. Cans 4 10 lbs.
$331.20
560-4 gal *4 gal. Pail 1 42 lbs. pail
$229.90
*A $5.00 Special Packaging charge applies if shipped via UPS or FedEx.

INSTALLATION INSTRUCTIONS
How To Install Stair Treads - The purchase of rubber or vinyl stair treads warrants proper installation and maintenance
procedures in order to assure complete satisfaction. For unusual and special conditions, contact the factory for recommendations.

Where To Install - Install stair treads on any smooth dry interior step provided the shape of the step conforms to the underneath
contour of the stair tread; particularly at the section where the flat part of the tread joins the nosing. A tight fit between stair treads
and steps is essential. We recommend the use of Epoxy Nose Caulk on all stair tread installations (required with adjust-a-nose treads).

Where Not To Install - If the shape of the steps does not conform to the shape of the stair treads and cannot be altered to
conform, we do not recommend installation of treads unless special instructions are carefully followed. We do not recommend
installing rubber treads on exterior steps.

Room Temperature - Materials, room and adhesives should be no less than 70 degrees Fahrenheit (21 degrees C) 48 hours prior
to, during and after installation.

Repairing Worn and Uneven Edges - Repair worn, uneven, or misaligned edge of steps.
If an open space exists underneath the nosing of the thread when it is applied against the step you must fill the space with Epoxy
Nose Caulk. It is essential that there be no space between the step and the stair tread when the installation is completed.

Preparation for Installation - Surfaces of steps must be level, clean, dry and free from oil, grease, rust, paint, varnish and old
coverings, adhesives and any other foreign substance. Wooden steps should be thoroughly nailed down.
Worn or dished-out steps, cracks, holes, depressions or any other irregularities on the step should be repaired by filling or sealing
and smoothing with an underlayment compound.

Fitting and Cutting - Treads are usually supplied over size, with untrimmed ends, to allow extra material to compensate for variation
in step dimensions.
Treads should be individually trimmed to fit each step, both in depth and from side to side. The rear edge should be cut with a slight
underbevel for a better fit. The stair treads can be marked with an awl and cut using a steel straight edge and a linoleum knife.
The most important factor in proper stair tread installation is to see that no air space exists underneath the nosing part of the treads.
The tread must not flex or move as traffic walks across the steps. Epoxy Nose Caulk should be used as described on the label.
It is important to use the correct adhesive. For vinyl treads, contact adhesive must be used. For rubber treads, install with contact or
suitable rubber flooring adhesive, depending on service conditions. Cove base adhesives are not recommended.

Installation of Rubber Stair Treads - After the steps have been prepared and the stair treads cut and fitted as described,
begin installation by spreading adhesive on the stair step completely covering the surface and the nosing.
When using contact adhesive, the adhesive should then be spread on the bottom of the stair tread and completely underneath the
nosing. Always follow instructions on label of adhesive container.
We suggest coating two steps and two treads at one time, then install the treads as described below. An alternate suggestion is to
apply adhesive to every other step on a flight of stairs, install these treads; go back and do the remainder.

Install Stair Treads - Set the stair tread into its proper position on the step, beginning at the nosing and pushing back firmly and
as tightly as possible, holding up the back surface of the tread. After nosing is completely in place, begin at the front and move back
on the surface of the tread towards the riser; the tread should be pushed down firmly onto the step.
After installation is completed, roll newly installed stair treads with a hand roller, making certain that the stair tread nosing is fitted
tightly against the step nosing. If any difficulty is experienced in holding the nosing to an understair, use a few hardened steel head-
less brads to secure it while the adhesive is drying.
Rubber or vinyl risers should not be installed so as to extend up underneath the nose of the stair tread. The top of the riser should
butt against the bottom of the tread nose.

Final Precautions - Any adhesive or caulking compound on the surface of the stair treads should be wiped off before it dries,
using a cloth dampened in denatured alcohol. If adhesive has dried, remove carefully with #00 steel wool and denatured alcohol. Rub
lightly to avoid dulling and scratching stair treads.
It is important that traffic be kept off the newly installed stair treads, until the adhesive has set up sufficiently to prevent movement
and assure a firm bond.

Where construction work by other trades requires traffic over newly installed stair treads, protect treads with heavy building paper
or planking as needed.
Do not wash or apply any surface treatments for about one week after installation to allow sufficient time for the stair treads to become
tightly bonded to the steps.

Maintenance Tips - The following simple steps for correct care are recommended:
Daily sweeping with soft hair push broom, also before and between washings, will cut down the number of washings and remove
dirt and foreign matter.
During bad weather any accumulated rain or slush should be wiped promptly from stairs to prevent slipping. Wipe up spillage before
it has a chance to harden.
When cleaning is necessary, wipe with cloth or damp mop, using clean room-temperature water. Do not flood stairs.
In stubborn cases, damp mop with room temperature water and solution of liquid detergent suitable for rubber floor covering or a
solution of ammonia and water. Immediately rinse stairs with clean room-temperature water, changing rinsing water frequently.


Rubber Stair Tread Systems with Design Patterns, Molded Rubber Diamond Design Stair Tread, Square Nose, Curved Nose,
Homogeneous Rubber, Disc Stair Tread, Rubber Stair Tread, Molded Rubber Tread, Horizontal Bar Pattern, Neoprene Contact
Adhesive, and Epoxy Stair Nose Caulk from your complete source for material handling equipment.

Back to Product Category
Home - Order - Search - Quote- Info - About Us - My Account - Shopping Cart