Gilmore-Kramer Company Material Handling Equipment - 1-800-544-3137 - Service - Installation - Custom Fabrication
Home Order Search Quote Info About Us My Account Shopping Cart
    Categories
Back to Product Category

MODEL TL

HEAVY DUTY HORIZONTAL
BELT CONVEYOR

heavy duty horizontal belt conveyor
The Model TL with its rugged,
heavy-duty construction is ideally
used for long assembly line
operations, inspections, testing,
sorting, and packing. Can be
floor-supported or ceiling-hung.
6 Belt Widths
Reversible (with center drive)
Rugged Construction
Adjustable MS-Type Floor
  Supports Available

horizontal belt conveyor

STANDARD SPECIFICATIONS
BELT – Ultimate 140 BBS - Nitrile. SNUB IDLER – Adjustable 2-1/8 in. dia. for tail
end 2-1/2 in. dia. for drive end. Pre-lubricated ball
bearings. Guards included.
BED – 6-5/8 in. deep x 12 ga. formed steel slider
bed powder painted. Reinforced with 3/4 in.
pipe which forms sockets for guard rails. Standard
5 ft. & 10 ft. long sections bolt together with splice
plates. 48 in. and 51 in. bed widths are available
in 5 ft. lengths only.
RETURN IDLER – Adjustable 1.9 in. dia. pre-
lubricated ball bearings.
TAKE-UP – Take-ups at tail pulley. Provides 4 in. of
belt take-up.
END DRIVE – Located on discharge end of conveyor,
chain guard on left hand side.
BEARINGS – Sealed, pre-lubricated, self-aligning,
ball bearings on drive and tail pulleys.
DRIVE PULLEY – 8 in. dia. with 1-3/16 in. dia.
shaft at bearings, machine crowned and fully lagged.
SPEED REDUCTION – Sealed worm gear C-Face
speed reducer. No. 50 roller chain to drive pulley.
TAIL PULLEY – 6 in. dia. with 1-3/16 in. dia.
shaft at bearings, machine crowned.
MOTOR – 1 HP – 208/230/460/575V – 3 Ph. –
60 Hz. Totally Enclosed Fan Cooled C-Face.
BELT SPEED – Constant 65 FPM.
FLOOR SUPPORTS – Now supplied as optional
equipment.
CAPACITY – Maximum load per linear foot of
conveyor 100 lbs. NOT TO EXCEED capacity in
charts.

8" DIA DRIVE PULLEY HORIZONTAL LIVE LOAD CAPACITY @ 65 FPM
HP BELT WIDTHS TO
LENGTHS UP TO
52' 102'
DISTRIBUTED LOAD (LBS.)
1 24" - 30" 530 350
36" - 42" 450 250
48" - 52" 360 100
2 24" - 30" 1250 1100
36" - 42" 1200 950
48" - 52" 1100 850

OPTIONAL EQUIPMENT
FLOOR SUPPORTS - MS Type floor supports are
available with a wide range of adjustment. Specify top
of belt or roller elevation. One support required at every
bed joint and ends of conveyor. Holes in feet for lagging
to floor. Knee braces recommended above MS-6
support.
LOWER POWERED FEEDER* – Chain type
driven from tail pulley of inclined conveyor. Under-
side take-up required when end drive is used. MS
Type floor supports now supplied as optional equipment.
8 in. dia. drive recommended on conveyor when feeder
exceeds 44-1/2 in. OAL–50-1/2 in. OAL with system
end.
BELT* - White Polymate 100 RMP-COS (cover one
side), Black Trackmate 120 Roughtop with PVC cover,
Brown Polymate Roughtop w/Nitrile cover, Black
Trackmate 533 COS-PVC, Tan Glidetop, Pure Gum
Rubber Roughtop.
BUTT COUPLINGS – Provides connection to SB,
RB, LR, ACC, ACZ, ABEZ, 190- NSP, 190-NSPEZ,
20-CR, 1.9 in. & 2.0 in. gravity conveyors. Includes
1 in. dia. pop out roller. Center drive or underside
take-up recommended.
BELT SPEED* - Other constant and variable speeds.
V-belt drive supplied on speeds under 17 FPM.
SYSTEM END ROLLER – 12 in. long tail sections
provide connection to: SB, RB, LR, ACC, ACZ, ABEZ,
190 NSP, 190-NSPEZ, 1.9 in. & 2.0 in. gravity con-
veyors. Includes 1.9 in. dia. pop-out transfer roller. Belt
width is 6 in. less than bed width. Center drive or under-
side take-up required.
OVERHEAD END DRIVE - Motor-reducer
unit mounted 9-1/2 in. above belt. Other clearances
available, specify. (Chain guard right hand side).
Minimum elevation 10 in.
SIDE MOUNTED END DRIVE - Motor-reducer
unit mounted left hand side of conveyor. Minimum
elevation 10 in.
GUARD RAILS – Adjustable Universal Channel
Guard Rail, solid side guards, PC side guards with
formed top.. Fixed Channel overlapping, one direction
(use with systems ends only). Fixed Channel non-
overlapping, reversing (use with system ends only).
CENTER DRIVE - Provides 16 in. of belt take-up.
Minimum elevation 20 in. Specify location. Minimum
OAL 66 in.
CASTERS – See below for options.
POLY-TIER SUPPORTS – 36 in. to 120 in. support
heights in 6 in. increments. Knee braces supplied.
LOW ELEVATION SIDE MOUNTED CENTER DRIVE - Motor-reducer unit mounted to side of con-
veyor. Minimum elevation 16-1/2 in.
CEILING HANGERS – 5/8 in. dia. x 8 ft. long
unplated rods fully threaded. Other lengths and gal-
vanized rods available.
STACKED END DRIVE - Contact factory for mini-
mum elevations.
V-BELT DRIVE - V-Belt supplied between motor
and reducer. Minimum overall drive width 14 in.
MOTORS – Energy effi cient, single phase, brake-
motor, other characteristics. 2 HP maximum.
O-RING DRIVE CHAIN - With sealed in lubricant
(Recommended for applications that do not permit
regular lubrication). Allow 65 in.
ELECTRICAL CONTROLS – One direction
manual start switch, reverse drum switch, non-reversing
and reversible magnetic starters, push button stations.
AC variable frequency drive.
*NOTE: Capacity affected with these options.
UNDERSIDE TAKE-UP - Provides 16 in. of belt
take-up. Extends down 15-3/4 in. from top of belt.
NOSEOVER* - Adjustable, single (0° to 15°),
double (0° to 30°).

PRICES FOR COMPLETE CONVEYOR INCLUDE:
• End Drive, Located on Discharge End of Conveyor,
  Chain Guard on Left Hand Side When Standing at
   Infeed Looking Toward Discharge
• Black Ultimate 140 BBS Belt
• 6-5/8” Deep x 12 Ga. Slider Bed
• “C” Face Speed Reducer–Sealed Worm Gear
• 1 HP–“C” Face Totally Enclosed Motor (Specify
   Exact Voltage)
• Totally Enclosed Chain Guard
• 65 FPM Belt Speed
• Less Electrical Controls
• Less Floor Supports

Order Online, by Phone, or by E-Mail

~ Add items to your online shopping cart ~
Click a Price of the item you wish to purchase.


*Overall
Length
"A"
6" Dia.
Tail
Pulley
Bed
Length
"L"
Overall
Length
"A"
Center
Drive
Black Ulimate 140 BBS
Belt Widths
24" 30" 36" 42" 48" 52"
12 Ga. Steel Bed Widths
30"
36"
42"
*48"
*54"
*58"
7'-1" 5' 6'-4"
N/A
N/A
N/A
N/A
N/A
12'-1" 10' 11'-4"
17'-1" 15' 16'-4"
22'-1" 20' 21'-4"
27'-1" 25' 26'-4"
32'-1" 30' 31'-4"
37'-1" 35' 36'-4"
42'-1" 40' 41'-4"
47'-1" 45' 46'-4"
52'-1" 50' 51'-4"
57'-1" 55' 56'-4"
62'-1" 60' 61'-4"
67'-1" 65' 66'-4"
72'-1" 70' 71'-4"
77'-1" 75' 76'-4"
82'-1" 80' 81'-4"
87'-1" 85' 86'-4"
92'-1" 90' 91'-4"
97'-1" 95' 96'-4"
102'-1" 100' 101'-4"
Price Per Foot
*NOTE: 5’ Bed Sections Only, V-Belt Drive Required with Center Drive

IMPORTANT NOTES
• OTHER LENGTHS
Other lengths not listed in price chart are available. For “IN-BETWEEN SIZES”, use next larger Overall Length “A”
price.
• OTHER WIDTHS
For “IN-BETWEEN WIDTHS”, use next width plus 10%. For widths over 58” OAW, contact us.
• STANDARD WIDTHS
All standard widths to be offered in 1 FOOT length increments beginning at 7’-1” OAL - 2 weeks from factory.
(Excludes 54” and 58” Overall Bed Widths.)
• INTERMEDIATE BEDS
Use per foot price of width x required length, supports not included. Available in 30", 36" and 42" OAW in 5 ft.
and 10 ft. bed lengths only. - 3 days.

• FLOOR SUPPORTS
FLOOR SUPPORTS ARE NOT INCLUDED IN BASE PRICE. There are two (2) stationary floor supports
required for the first bed section and one (1) support required per bed section thereafter.

Order Online, by Phone, or by E-Mail

~ Add items to your online shopping cart ~
Click a Price of the item you wish to purchase.


PRICES FOR OPTIONAL EQUIPMENT
OPTIONAL BELTS
Extra Price Per Foot Conveyor Length "A" (in addition
to Black Ultimate 140 BBS Belt regularly furnished).
See chart below.
BELT DESCRIPTION
BELT
WIDTH
PRICES PER FOOT OF CONVEYOR LENGTH "A"
Tan
Glidetop
Polymate 100
RMP-COS
(White)
Trackmate
533 COS-
PVC (Black)
Trackmate 120
Roughtop with
PVC cover
(Black)
Polymate
Roughtop
Nitrile-COS
(Brown)
Pure Gum
Rubber
Roughtop
High Grip
Longitudinally
Grooved Belt
24"
30"
36"
42"
48"
52"
Contact us for 1 week availability of selected belts.
DRIVE COMPONENT DEDUCTS CONSTANT AND VARIABLE SPEEDS
Less Motor Drive, Motor Mount and Guards,
but with Shaft Extension.........Deduct ............
Constant C-Face–Within 17-135 FPM
.......... End Drive Only .............. No Charge
NOTE: When a 2 HP motor is required,
26 FPM is minimum speed, and a V-Belt
Drive is required. Constant V-Belt–
Minimum of 4 FPM
.......................... Use V-Belt Drive Add-On
Constant Speeds Below Those Listed Above
........................................... Contact us
Variable Speed .................................
See AC Variable Speed Drives
$777.20
Less Motor Only (1 HP-208/230/460/575V-3
Ph.-60 Hz.) .....................Deduct ............
$282.90
*Less Reducer ................Deduct ............ $307.40
*Less V-Belt Guard, Chain Guard, sheaves and
sprockets when V-Belt drive is supplied. Less chain
guard and sprockets when C-Face drive is supplied.
OPTIONAL DRIVES
Unified Drives: (Shaft Mounted)
Unified Drives: OVERALL FRAME WIDTH
30" to 42" 48" 54" to 58"
End Drive 8” Drive Pulley
Center Drive 8” Drive Pulley with 075 Reducer
Center Drive 8” Drive Pulley with 090 Reducer
8” Drive Pulley
Speed FPM
65
78
97
130
156
195
260
389
Max HP
1
1.2*
1
2
2
2
2
2**
* Reducer size increases with 2 HP.
**Contact us.
OPTIONAL DRIVES
GUARD RAILS
DRIVE
TYPE
BED WIDTHS
30" to 42" 48" 54" to 58"
End Drive (V-Belt)
Side Mounted End (C-Face)
Side Mounted End (V-Belt)
Stacked End Drive (C-Face)**
Stacked End Drive (V-Belt)**
Center (C-Face)
Center (V-Belt)
Side Mounted Center (C-Face)
Side Mounted Center (V-Belt)
Center w/ Ext. Take-Up C-Face
Center w/ Ext. Take-Up V-Belt
High Perf. Center C-Face
Heavy Duty Center C-Face
NOTE: Available in 5’ and 10’ lengths only.
Contact us for other lengths.
Adjustable Universal Channel Guard Rail ...........
Both Sides .........per foot ............................
One Side ...........per foot ............................
$15.10
$7.80
HEIGHT (Both Sides-Per Foot) TYPE
Solid Side PC Style
2"
N/A
3-1/2"
N/A
4"
N/A
6"
9"
12"
NOTE: Solid Side Guards mount vertically on outside
of conveyor bed.
#50 O-Ring Drive Chain..........Add ...............$284.40
CASTERS
#60 O-Ring Drive Chain..........Add ...............$406.00
  4" Dia. 6" Dia.
CASTERS
Steel
Rubber
Steel
Rubber
Extra Per Support*
** Contact us for minimum elevations.
UNDERSIDE TAKE-UP
Provides 16" of Belt Take-Up on Long Units. Required
on Incline Units with Powered Feeders and End Drives.
* Price Includes Knee Braces
NOTE: Casters for HS Supports, contact factory.
• CASTERS
Are available in either Rigid or Swivel type—Specify.
Brakes for Casters (Add-On Per Support)*:

4” Dia. Caster ...............................................$39.20
BED WIDTHS PRICE
30"
36"
42"
48"
54" to 58"
6” Dia. Caster ...............................................$125.20
FILLER PLATES
For Solid Side Guards (NOT AVAILABLE
on 2" High Guards)...per joint.......................

$72.30

MOTORS
Extra Motor Price for OTHER THAN: 1 HP–208/230/460/575 V–3 Ph.–60 Hz.–Totally Enclosed. Speed affects
horsepower requirements.
H.P.
REQ.
ENERGY EFFICIENT
TOTALLY ENCLOSED 
BRAKEMOTORS 
200/208/230/
460/575V
3 Ph.-60 Hz.
115/230V
1 Ph.-60 Hz.
Holding Brake 208/230/
460/575V
3 Ph.-60Hz.
Cycling Brake
208/230/
460/
*575V
3 Ph.-60Hz.
.
Cycling Brake 208/
230/460/*575V
3 Ph.-60Hz.
Holding Brake
115/230V
1 Ph.-60Hz.
1
N/C
2
*575V - Prices coded in light blue call for lead time.
  * Note: "High Cycle Brakemotors" are used for indexing and are rated for 30 cycles per minute. Add-On Prices
     Include 5AC Reducer, Heavy Duty Motor Base Plate, and #60 Chain and Sprockets with Taper Bushed Hubs.
** Note: "High Cycle Brakemotor" Add-On Prices Include 5AC Reducer, Heavy Duty Motor Base Plate and
    Timing Belt Drive.
    Note: SSB and D Series are Holding Brakes and are NOT rated for cycling.
POWERED FEEDER
Prices for Powered Feeder Include: Black Ultimate 140 BBS Belt, Bed, Drive & Tail Pulleys
NOTE:Adjustable Floor Supports Not Included In Base Price
NOTE: (2) Adjustable Floor Supports Required. Gravity Conveyor Bracket with “Pop-Out” Roller on Tail End
(24” Wide Belt Only)
NOTE: NO DEDUCT for Feeders less than minimum lengths. Shorter lengths COULD CAUSE IMPROPER
BELT TRACKING.
NOTE: With System End Roller Assembly Add 4” to OAL.
Underside Take-Up required on Incline Units with Power Feeders and End Drives.
CHAIN DRIVEN TYPE
BELT WIDTHS 24" 30" 36" 42" 48" 52"
Min. Length Overall 63-1/2" 75-1/2" 87-1/2" 105-1/2" 120-1/2" 120-1/2"
Price
Price Per Foot
#50 O-Ring Chain on Slave Connection. ........... Add ....................$203.50
#60 O-Ring Chain on Slave Connection ............ Add ................... $271.00

Order Online, by Phone, or by E-Mail

~ Add items to your online shopping cart ~
Click a Price of the item you wish to purchase.


FLOOR SUPPORTS COUPLING HARDWARE
Not Included in Base Price. Use Chart Below for
Required Elevation.
*Gravity Conveyor Bracket with Pop-Out
  Roller...per end.........................................
$87.10
 *Butt Couplings with Pop-Out Roller..........
  ..........per end...........................................
"MS" INTERMEDIATE & TAIL SUPPORT
Model No. Adjustment to Top of Belt Price Each
*MSL-2 10" to 11-1/2"
*MSL-3 11-1/2" to 14-1/8"
*MS-1 13-3/4" to 15-1/2"
*MS-1.2 14-3/4" to 16-1/2"
*MS-1.4 15-3/4" to 17-1/2"
*MS-2 16-3/4" to 19-3/4"
*MS-3 19-3/8" to 22-3/8"
MS-4 22-3/8" to 28-3/8"
MS-5 26-3/8" to 32-3/8"
MS-6 30-3/8" to 42-3/8"
MS-7 40-3/8" to 52-3/8"
MS-8 52-3/8" to 64-3/8"
MS-9 64-3/8" to 76-3/8"
MS-10 76-3/8" to 88-3/8"
MS-11 86-3/8" to 98-3/8"
MS-12 98-3/8" to 110-3/8"
$81.00
  **System End Roller Assembly**............
  ..........per end...........................................
$223.10
*  24" Wide Belt Only.
**Note: Center drive required if nose rollers used on each end
Tail Pulley - 2 1/4” Dia ..............................
.................. per end ...................................... $211.30
*Through 24” Wide Belt Only.
**NOTE: When System End is supplied on both ends, Center
Drive is required. See “Optional Drive Chart” for Center Drive
Price.
ELECTRICAL CONTROLS
(See bottom of page)
GALVANIZING
Contact us.
UNDERTRUSSING (MAX. 30" OAW)
Undertrussing Kit Assembly (A)....Each..........$281.60
Undertrussing Kit Assembly (B)....Each..........$281.60
Undertrussing Kit Assembly (C)....Each..........$281.60
NOTE: Specify quantity each.
NOTE: Undertrussing not recommended for
units over 40' bed lengths; floor supports requires.
"MSD" DRIVE SUPPORT
Model No. Adjustment to Top of Belt Price Each
*MSD-0-10 10" to 10"
*MSD-0-11 11" to 11"
*MSD-0-12 12" to 12"
*MSD-0-13 13" to 13"
*MSD-0-14 14" to 14"
*MSD-0-15 15" to 15"
*MSD-0-16 16" to 16"
MSD-1 16-9/16" to 18-5/16"
MSD-1.2 17-9/16" to 19-5/16"
MDS-1.4 18-9/16" to 20-5/16"
MSD-2 19-9/16" to 22-5/16"
MSD-3 22-1/16" to 25-1/16"
MSD-4 25-1/16" to 31-1/16"
MSD-5 29-1/16" to 35-1/16"
MSD-6 33-1/16" to 45-1/16"
MSD-7 43-1/16" to 55-1/16"
MSD-8 55-1/16" to 67-1/16"
MSD-9 67-1/16" to 79-1/16"
MSD-10 79-1/16" to 91-1/16"
MSD-11 89-1/16" to 101-1/16"
MSD-12 101-1/16" to 113/1/16"
TROUGHING ATTACHMENT
Price Per Foot of Conveyor..... Both Sides.......$40.10
TROUGHING ATTACHMENTS WITH
HUGGING STRIPS

Requires 6” High Sides Minimum.
Not to be used with rough top, high grip longtitudinal
grooved or cover one side belts................
Both Sides per Foot.........................................$64.50
NOSEOVER
Adjustable type. Support not included in base
price. DOES NOT include bed length.
Single ...............(0° to 15°) .......................$341.40
Double ..............(0° to 30°) ......................$482.20
NOTE: Brakemotor required on Incline or Decline
Units greater than 10°.
    Knee Braces...per pair......................................... $30.00
NOTE: MS-7 to MS-12 and MSD-7 to MSD-12:
Knee Braces included in price.
  *Less than 19-1/2" top of belt elevation-
    Side Mount Drive Required.
    NOTE: Knee Braces are required on incline or
    decline units with MS-3 or higher supports.

Order Online, by Phone, or by E-Mail

~ Add items to your online shopping cart ~
Click a Price of the item you wish to purchase.


CEILING HANGERS
Ceiling Hanger Brackets with (2) 5/8” dia. x 8’-0” long unplated
fully threaded rods ......................................................................
ceiling hangers for conveyors $147.90
Ceiling Hanger Brackets with (2) 5/8” dia. x 8’-0” long galvanized
fully threaded rods .......................................................................
$176.60
Ceiling Hanger Brackets with (2) 5/8” dia. x 10’-0” long unplated fully
threaded rods................................................................................
$218.40
Ceiling Hanger Brackets with (2) 5/8” dia. x 10’-0” long galvanized fully threaded rods.................................................................................
$359.60
Ceiling Hanger Brackets with (2) 5/8” dia. x 12’-0” long unplated fully threaded rods.................................................................................
$362.60
Ceiling Hanger Brackets with (2) 5/8” dia. x 12’-0” long galvanized fully threaded rods..................................................................................
$419.40
Ceiling Hanger Brackets, Less Rods Only .................................... $93.10
Extra Length Rods:
(2) 8’-0” long x 5/8” dia. unplated fully threaded rods .................. $54.20
(2) 8’-0” long x 5/8” dia. galvanized fully threaded rods ............... $83.40
(2) 10’-0” long x 5/8” dia. unplated fully threaded rods ................ $125.20
(2) 10’-0” long x 5/8” dia. galvanized fully threaded rods ............. $266.30
(2) 12’-0” long x 5/8” dia. unplated fully threaded rods ................ $269.60
(2) 12’-0” long x 5/8” dia. galvanized fully threaded rods ............. $326.50
Hex Coupling Nuts for Rods ......................................................... $4.90
Above noted delivery times determined by delivery time of model ordered.
POLY-TIER SUPPORTS
poly tier supports for conveyors
PRICES FOR COMPLETE
SUPPORT INCLUDE:
IMPORTANT NOTES
• Check for Clearance
• Specify type of conveyor to be used.
• Use in place of LS or MS Supports only.
• Painted Steel Support Legs
• Adjustable Cross pipe Assembly
• Knee Braces (1 set per level of
   conveyor)
• "U" Brackets
• Single Width Conveyor Only
CAPACITY DATA:
1500 lbs..............................................per cross pipe
4500 lbs..............................................per set of legs
(2) TIER POLY-TIER SUPPORTS
36"
42"
48"
54"
60"
66"
72"
78"
84"
90"
96"
102"
108"
114"
120"
(3) TIER POLY-TIER SUPPORTS
36"
42"
48"
54"
60"
66"
72"
78"
84"
90"
96"
102"
108"
114"
120"

Order Online, by Phone, or by E-Mail

~ Add items to your online shopping cart ~
Click a Price of the item you wish to purchase.


ELECTRICAL CONTROLS AND DRIVE SECTION
MANUAL START SWITCH or
SAFETY DISCONNECT
limit switch LIMIT SWITCH, SINGLE POLE,
WITH NYLON ROLLER LEVER
manual start switch
#032.1014......................................... $213.01 #033.2032 & #033.2072..................$555.67
Nema 4
"START-STOP", Nema 1, One direction, 30
AMP, 3 Pole (Single or 3 phase)
LIMIT SWITCH, DOUBLE POLE,
WITH NYLON ROLLER LEVER
limit switch double pole

#033.2033& #033.2072...................$332.11
Nema 4
REVERSING DRUM SWITCH
#032.103.......................................... $854.26

"Fwd-Stop-Rev", Nema 1, for 1-1/2 HP at
115 volts or 2 HP at 230 volts single phase,
or 2 HP max. three phase
PROXIMITY SWITCH, INDUCTIVE,
(METAL SENSING)

#032.210.........................................$205.35
115 Volt AC, two wire with ground, 30mm dia.,
10mm range


foot swtich with guard FOOT SWITCH WITH GUARD
#032.211.........................................$243.09
24 Volt DC, two wire with ground, 30mm dia.,
10mm range
#032.200........................................... $270.29
(Constant Pressure) "On-Off" type, Nema 1,
Pilot Control or 1 HP max. single phase.


PHOTO EYE, ON-OFF TYPE
power cord and plug #EA-000005......................................$1,059.27
Banner Q45 Retro Reflective Photo Eye Kit
with timing module, reflector and mounting
brackets. Photo Eye output is one form C
type relay, Operating voltage
24-250VAC/12-250VDC
POWER CORD AND PLUG (20')
POWER CORD WITH PLUG ONLY 20' LONG
Model No.
Voltage
HP Rating
Prices
EA-039-1A
115/1
1/2-3/4
EA-039-2A
115/1
1
EA-039-3A
115/1
1 1/2
EA-039-4A
230/1
1/2-1
EA-039-5A
230/1
1 1/2-2
EA-039-6A
208-230/3
1/2-2
EA-039-7A
460/3
1/2-2
POWER CORD WITH PLUG 20' LONG WITH MANUAL START SWITCH AND MOUNTING BRACKET
Model No.
Voltage
HP Rating
Prices
EA-039-1B
115/1
1/2-3/4
EA-039-2B
115/1
1
EA-039-3B
115/1
1 1/2
EA-039-4B
230/1
1/2-1
EA-039-5B
230/1
1 1/2-2
EA-039-6B
208-230/3
1/2-2
EA-039-7B
460/3
1/2-2
MOUNTING BRACKETS FOR PHOTO
EYE #033.2122
B-05165...........................................$118.10

AIR PRESSURE SWITCH
#094.191........................................$691.31
Nema 4

EMERG. STOP PULL CORD SWITCH
#032.285 with 032.2851 Turnbuckle
...........................................................
$696.08
Nema 4
"RED" EMERGENCY PULL CORD
CABLE AND MOUNTING HARDWARE
#032.281...one side.................$7.44 per / ft.
                  both sides..............$15.87per / ft.
EMERGENCY PUSH BUTTON
#032.284..........................................$279.61
Nema 4

PHOTO EYE, 18MM DIA., DIFFUSED,
(PHOTO PROX.) 115 VOLT, LIGHT
OPERATE, 2-METER CABLE
#032.2113 (100mm range, 3.94")....$1,066.27
#032.2116 (200mm range, 7.87")....$194.14
#033.218 (400mm range, 15.74")....$293.48
NOTE: PRICING LISTED NOT MOUNTED
             OR WIRED
"PHOTO EYE, RETRO-REFLECTIVE,
(POLARIZED) 24 VOLT DC
#033.2128 with 032.21122 Cable.....$239.09
#032.21122 (Cable Only)...................$72.37

Order Online, by Phone, or by E-Mail

~ Add items to your online shopping cart ~
Click a Price of the item you wish to purchase.


CONTROLLER PRICES
AC VARIABLE SPEED CONTROLLER ONLY
SINGLE PHASE CONTROLLER INPUT
Motor Size 115 Volt 208/230 Volt
1/2 VSC-12-10 VSC-12-12
Price $1,491.84 $1,189.37
1 VSC-12-11 VSC-12-13
Price $1,724.27
2 N/A
VSC-12-14
Price ~
THREE PHASE CONTROLLER INPUT
Motor Size 208/230 Volt 460 Volt 575 Volt
1/2
VSC-01-15
VSC-01-18
VSC-12-29
Price
1
VSC-01-16
VSC-01-19
VSC-12-29
Price
2
VSC-01-17
VSC01--20
VSC-12-30
Price
REPLACEMENT INVERTER DUTY
ENERGY EFFICIENT MOTORS
HP Part No. Price
1/2 032.351 230/460
1 032.353 230/460
2 032.355 230/460
1/2 032.3512 575
1 032.3532 575
2 032.3552 575
IMPORTANT NOTES...
All above motors are 230 / 460 / 575 Volt, 3 Phase.
All above V/S Drive Kits include NEMA 1 / IP30
  Junction Box, Controller and Motor.
Good for cycle rates of up to 15 cycles per minute, at
  1/2 second ramp time, with a maximum speed of 250
  FPM.
Drawing No. DG-001146.
OPTIONAL: Mounting and Wiring Add-On . . .
(mounted close to the motor)
$675.20 When AC Variable Speed Controller is used with a
   Brake Motor, A Brake Relay Kit (EA-068A) is
   required. Add an additional $542.68 for this option.)
Brake Relay Kit (EA-068A).............................. $542.68

ELECTRONIC CLUTCH BRAKE DRIVE PACKAGE
Part No. Description Price
EA-VSC-01-CB 2 HP Electronic Clutch-Brake Kit $5,058.00
OPTIONAL: Mounting and Wiring Add-on .
(mounted close to the motor)
$675.20
KIT INCLUDES
Part No. Description
VSC-01-20 AC Variable Speed Controller, 460 Volt, 3 Phase
032.345 2 HP 460 Volt, 3 Phase, C-Face Motor TEBC
(Blower Cooled) With 5AC Reducer and #60 Chain
and Sprockets
IMPORTANT NOTES
Good for cycle rates of up to 60 cycles per minute.
1/10 second Accel and Decel time, with 350 FPM
   Maximum Speed.
230 or 460 Volt Only, Other Voltages, Contact us.
Motor Cooling Blower is 115 Volt, 1 Phase, 60 Hz.
Price Includes 5AC Reducer and #60 Chain and
  Sprockets
Part No. Description
VSC-01-17 AC Variable Speed Controller, 230 Volt, 3 Phase
032.345 2 HP 230 Volt, 3 Phase, C-Face Motor TEBC
(Blower Cooled) With 5AC Reducer and #60 Chain
and Sprockets

Order Online, by Phone, or by E-Mail

~ Add items to your online shopping cart ~
Click the Model No. of the item you wish to purchase.


starter
THIS STARTER LISTING MEETS TYPE "2"
COORDINATION (Defined)
An International Electrotechnical Commission (IEC) term that means: “under short circuit
conditions, the starter shall cause no danger to persons or installation and shall be
suitable for further use
.” The only allowable damage to the starter is light contact burning
or tack welding, provided the contacts are separable. Starters meeting this level of com-
ponent protection provides users with less down time and lower replacement costs.
THREE PHASE, IEC COMBINATION MAGNETIC STARTERS
H.P.
MOTOR
DUTY
NON-REVERSING
REVERSING
208 VOLT
230 VOLT
460 VOLT
575 VOLT
PRICE
208 VOLT
230 VOLT
460 VOLT
575 VOLT
PRICE
1/2
STANDARD EASY
CLEAN ENERG. EFF.
$1516.60
$2,023.30
 
 
 
 
 
 
 
 
1
STANDARD EASY CLEAN
ENERG. EFF.
 
 
 
 
 
 
 
 
1-1/2
GEARMOTORS
 
 
 
 
 
 
 
 
2
STANDARD EASY CLEAN
ENERG. EFF.
 
 
 
 
 
 
 
 
SINGLE PHASE, IEC COMBINATION MAGNETIC STARTERS
H.P.
NON-REVERSING
REVERSING
NON-REVERSING
REVERSING
 
115 VOLT
PRICE
115 VOLT
PRICE
230 VOLT
PRICE
230 VOLT
PRICE
1/2
$1,182.40
$2,023.30
$1,435.60
$2,023.30
1
1-1/2
2
• Manual Start-Stop Switch Kit • Start-Stop Push Button Kit, Remote Mounted
EA-000001 ...................................... $242.09 EA-000002....................................... $242.09
Includes: 032.1014 Manual Start Switch, Nema 1,
B-21467 Mounting Bracket with Mounting Hardware
Includes: 033.1955 Push Button Station, One
Direction, Nema1, B-21467 Mounting Bracket
with Mounting Hardware
Forward-Reverse-Stop Push Button Kit,
  Remote Mounted
• Up-Down-Stop Push Button Kit, Remote
   Mounted
EA-000003....................................... $440.67
Includes: 033.1965 Push Button Station, Reversing,
Nema1, B-21467 Mounting Bracket with Mounting
Hardware
EA-000004....................................... $440.67
Includes: 033.1975 Up Down Stop Push Button
Station, Reversing, Nema 1, B-21467 Mounting
Bracket with Mounting Hardware

Order Online, by Phone, or by E-Mail

~ Add items to your online shopping cart ~
Click a Price of the item you wish to purchase.


• “Start-Stop” Push-button Station • “Start-Stop”Push-button Station
033.1955
$211.23 033.195................................................. $142.50
Remote mounted, Nema 1 To be mounted in Mag Starter Cover
• “Fwd-Rev-Stop” Push-button Station • “Fwd-Rev-Stop”Push Button Station
033.1965 $397.05 033.196.................................................. $490.95
Remote mounted, Nema 1 To be mounted in Mag Starter Cover
• “Up-Down-Stop” Push-button Station
OPTIONAL STARTER CONTROLS
033.1975 $397.05
• Auto Restart Control, 3 Phase, Non-Reversing
Remote mounted, Nema 1
EA-011 ............................................
Includes: Photo Eye (033.2122), Dual Time
Delay Module (033.2172), Combination
Magnetic Starter with extra Contactor
(033.160), and a Control Circuit
Transformer (As Required), & Pushbutton
Station (033.195).
$3,210.68
IMPORTANT NOTES
Control Circuit Transformer Included for 115 Volt
  Control Voltage.
Above starters are in Nema 3, 4 and 12 Enclosures.
The starters included Safety Disconnect, Overload
  Relay, and Aux. Contacts as required.
IF AN ORDER IS SUPPLIED LESS MOTOR,
  AND IS SUPPLYING ANY ELECTRICAL
  CONTROLS, THEN MOTOR HP, VOLTAGE,
  PHASE, AND FULL LOAD CURRENT MUST BE
  STATED ON THE ORDER.
PRICING LISTED IS NOT MOUNTED OR WIRED.
• Auto Restart Control, 1 Phase, Non-Reversing
EA-012 (115 Volt) ...........................
EA-017 (230 Volt) ...........................
Includes: Photo Eye (033.2122), Dual
Time Delay Module (033.2172),
Combination Magnetic Starter with extra
Contactor (033.160), Pushbutton Station
(033.195), and (230 V. Only) a Control
Circuit Transformer (As Required).
Note: Above Price does NOT include
Photo Eye Mounting Bracket.
$3,253.63
$3,391.27
Add on $192.70 for the above Push Buttons
  to be Mounted.
Add on $995.10 for the above Starters and
  Push Button Stations to be Mounted and Wired.
  Supply 20'0" of cable for push button only.
• Mounting Brackets for photo eye
#033.2122
B-05165 ..............................................
$118.10

CONVEYOR WEIGHT TABLE
SIZE TO ORDER Overall Length "A" 6" Dia. Tail Pulley Bed
Length
"L"
Overall Length
with Center Drive
Belt Width 24" 30" 36" 42" 48" 52"
Bed Width 30" 36" 42" 48"* 54"* 58"*
7'-1"
5' 6'-4" WEIGHTS
(Lbs.)
375 N/A N/A N/A N/A N/A
12'-1" 10' 11'-4" 475 555 615 888 974 1060
17'-1" 15' 16'-4" 625 686 752 1084 1191 1298
22'-1" 20' 21'-4" 725 796 867 1280 1408 1536
27'-1" 25' 26'-4" 875 967 1065 1476 1625 1774
32'-1" 30' 31'-4" 975 1077 1180 1672 1842 2012
37'-1" 35' 36'-4" 1125 1248 1377 1868 2059 2250
42'-1" 40' 41'-4" 1225 1358 1492 2064 2276 2488
47'-1" 45' 46'-4" 1375 1529 1690 2260 2493 2726
52'-1" 50' 51'-4" 1475 1639 1805 2456 2710 2964
57'-1" 55' 56'-4" 1625 1810 2002 2652 2927 3202
62'-1" 60' 61'-4" 1725 1920 2117 2848 3144 3440
67'-1" 65' 66'-4" 1875 2091 2315 3044 3361 3678
72'-1" 70' 71'-4" 1975 2201 2430 3240 3578 3916
77'-1" 75' 76'-4" 2125 2372 2627 3436 3795 4154
82'-1" 80' 81'-4" 2225 2482 2742 3632 4012 4392
87'-1" 85' 86'-4" 2375 2653 2940 3828 4229 4630
92'-1" 90' 91'-4" 2479 2763 3055 4024 4446 4868
97'-1" 95' 96'-4" 2625 2934 3252 4220 4663 5106
102'-1" 100' 101'-4" 2725 3044 3367 4416 4880 5334
All weights are conveyor weights only. Accessories, crating, etc., are not included.
*5'-0" Bed, V-Belt Drive Only.

Belt Conveyors, Conveyor, Conveyor Belt, Low Profile Conveyor, Conveyors, and Slider Bed from your source for material handling
equipment.

Back to Product Category
Home - Order - Search - Quote- Info - About Us - My Account - Shopping Cart