Gilmore-Kramer Company Material Handling Equipment - 1-800-544-3137 - Service - Installation - Custom Fabrication
Home Order Search Quote Info About Us My Account Shopping Cart
    Categories
Back to Product Category

MODEL JLCV-V TROLLEY SUSPENSION
Variable Speed Electric Chain Hoist
variable speed electric chain hoist INFINITELY VARIABLE SPEED CAPACITY
- AT THE PUSH OF A BUTTON
JLCV-V MODELS -Redefining Lifting - now features a
Variable Frequency Drive. The compact size of the drive unit
allows neat and complete placement under the cover of the hoist.
The JLCV-V drives feature a Closed Loop System. The Closed
Loop System provides additional load control in lieu of a
secondary load brake by monitoring the movement of the load
hook through the transmission. Combine this new JLCV-V option
with the renowned Coffing design features of a five-pocket load
sheave, multiple-disc motor brake and overload clutch and you
have the best performance value in the marketplace today.
VARIABLE FREQUENCY DRIVE BENEFITS -
The VFD allows for unsurpassed load-spotting and inching
capability. The VFD offers additional speed flexibility that
standard 2-speed motors cannot offer. The soft starting and
stopping of the unit is perfect for delicate applications and
reduces the daily wear and tear on the hoist. Variable Frequency
Drives can also be externally mounted to Motorized Trolley
Units.
Also Available with Universal Trolley
(See Below)
CONTROL OPTIONS- The standard 2-step
buttons allow the operator to increase and
maintain the lifting or lowering speeds. The
optional 3-step buttons allow the operator to
increase, maintain, or decrease the lifting or
lowering speeds without interruption.
VARIABLE FREQUENCY DRIVE FEATURES -
Closed Loop System that monitors the load hook's direction
and speed; additional components monitor motor amperage
to provide consistent and reliable operation. In-field, instant
programming - from infinitely variable (12:1 speed ratio) to
any intermediate, predetermined speed range. 24-VAC
control inputs built-in.
CAPACITIES & LIFTS - Rated loads from
1/8 to 2 Tons, with lifting speed of 8 to 32 feet
per minute depending on the capacity. Standard
lifts of 10, 15 and 20 with other lifts available.
Standard push-button drop is 4-feet less than
lift.
VOLTAGE & MOTOR OPTIONS - 230; 460; 208; 380;
575 - three phase. 60 hertz standard or 50 hertz available.
ACCESSORIES & OPTIONS - Full line
available to meet a variety of applications.
SUSPENSION OPTIONS - Rigid or swivel top hook, lug,
plain, geared, and motorized trolley available.
DURABLE CONSTRUCTION - Built in
compliance with ASME/ANSI B30.16
LIFETIME WARRANTY
Order Online, by Phone, or by E-Mail

~ Add items to your online shopping cart ~
Click a Price of the item you wish to purchase.
PRICING FOR MODEL JLCV-V - Variable Speed (12 to 1 Ratio) (Specify desired voltage)
Model No. No. of
Chns.		 Std.
Lift		 Lift
Speed		 Mtr.
H.P.
3 Ph.		 Trolleys
JLCCT - Plain **JLCMT - Motorized
A Dim. Ship Wt. Price A Dim. Ship Wt. Price
1/8 Ton
JLCV0232-10
1
10
32
1/4
17 15/16
89
17 15/16
175
1/4 Ton
JLCV0516-10
1
10
16
1/2
17 15/16
89
17 15/16
175
JLCV0532-10
1
10
32
1/2
17 15/16
103
17 15/16
189
1/2 Ton
JLCV1016-10
1
10
16
1/2
17 15/16
103
17 15/16
189
JLCV1032-10
1
10
32
1
17 15/16
116
17 15/16
202
1 Ton
JLCV2016-10
1
10
16
1
17 15/16
118
17 15/16
204
2 Ton
JLCV4008-10
2
10
8
1
20 5/8
160
20 5/8
214
Note: Push button stations are 2-step standard 3-step station optional; Hoists are factory set at infinitely variable speed,
if other settings are required please note at the time of order.
Push button drop is 4 ft. less than lift. For special lifts, see above under accessories. Hoist equipped with 15 ft. power cord.
Add $195.19 for 3-step buttons.
JLC Hoists may require CAS field certification, consult us.
† Dual tread wheels 4" tread diameter.
** Standard trolley speeds are 35 & 75 FPM. Optional speeds available - consult us. Specify speed when ordering.
SPECIFICATIONS
Capacity
Model No.
Trolley‡
Mount
JLCVET
Hdrm (in.)
JLCVMT
Hdrm (in.)
JLCVCT
Flange*
Width (in.)
Beam
Ht. (in.)
Min. Rad.
Curve (in.)
JLCVCT
Net Wt.
(lb.)
JLCVMT
Net Wt.
(lb.)
(lb.)
(kg.)††
(Ton)
250
125
1/8
JLCV(†)-0232
C
17 15/16
17 15/16
3-8
5-12
48
87
173
500
250
1/4
JLCV(†)-0516
C
17 15/16
17 15/16
3-8
5-12
48
87
173
500
250
1/4
JLCV(†)-0532
C
17 15/16
17 15/16
3-8
5-12
48
99
185
1000
500
1/2
JLCV(†)-1016
C
17 15/16
17 15/16
3-8
5-12
48
91
185
1000
500
1/2
JLCV(†)-1032
C
17 15/16
17 15/16
3-8
5-12
48
112
198
2000
1000
1
JLCV(†)-2016
C
17 15/16
17 15/16
3-8
5-12
48
114
200
4000
2000
2
JLCV(†)-4008
C
20 5/8
20 5/8
3-8
6-18
60
156
210
† Specify JLCVCT for plain trolley and JLCVMT for motorized trolley models.
†† Metric rated option available.
† C = Cross mount, standard on all JLCV trolley models.
* For JLCVMT models, standard flange adjustment is 3.33 - 6". Consult us for special beam size options.

UNIVERSAL TROLLEY (PLAIN * GEARED * MOTORIZED)
GEARED TROLLEY
MOTORIZED TROLLEY
BENEFITS & FEATURES

UNIVERSAL DESIGN REDUCES INVENTORY
Designed to fit most CMCO brand air and electric
chain hoists up to 3 tons, the UT reduces inventory
costs while increasing inventory flexibility.

THE SMART & ECONOMICAL CHOICE
With its very attractive price, the ability to be used
with a multitude of hoists, and its long service life,
the UT offers the greatest value of any trolley on
the market today.

CONVERTIBLE
Plain trolleys equipped standard with geared track-
wheels and side plate. Simply add a hand-geared kit
to convert unit to a geared trolley in the field.

LONG LIFE & LOW MAINTENANCE
Dual tread wheels fit tapered or flat beams. Wheels
include permanently lubricated shielded ball bearings
for long life and low maintenance.

EASILY ADJUSTABLE TO FIT A WIDE
RANGE OF BEAMS
The UT can be quickly and easily adjusted to fit the
most popular beam fl ange widths. Maximum flange
width of 8-5/8."

OPERATOR SAFETY
The UT features wrap-around side plates. Drop lugs
provide additional security to improve operator safety
and protect the wheels.

PINNED SUSPENSION BOLTS
Castle nuts are pinned to ensure the bolts stay tightened,
increasing operator safety.

CORROSION RESISTANT
Zinc-plated bolts, nuts and washers along with painted
frames protect against corrosion and wear.

MACHINED TREAD WHEELS
Ensure a better fi t to the beam for smoother operation
and longer life.

CSA PENDING

LIFETIME WARRANTY
Best in the industry.
PLAIN TROLLEY
MOTORIZED
CM UT motorized trolleys are best for applications
requiring high cycling and long-distance hoist travel.
*75 or 75/19 fpm traverse is available
on 3-ton trolleys when used with hoists
rated 2-ton capacity or less.

SPEED
Standard Single Speed: 15, 35 and 75* FPM.
Optional 2-Speed: 15/4, 35/9 and 75/19* FPM.

AC POWER SUPPLY
Standard Single Speed: 208-230/460,575V 3-60 HZ,
3-phase. Optional 2-Speed: 208, 230, 460, 575V 3-
60 HZ, 3-phase.

OPTIMAL LOAD CONTROL & SAFETY
For gentle starts, greater load positioning accuracy, and
to minimize load swing, choose the optional 2-speed unit
featuring a 4:1 speed ratio and 3-phase single voltage.

EASY ACCESS CONTROL BOX
Control box design allows the entire cover to be removed
for easy access to components. Box has a white back-
ground for increased visibility and cover can be used as a
tray to hold tools when servicing the unit.

WEATHER-PROOFING
NEMA 3R Control Box Enclosure.
PLAIN & GEARED
CM UT plain trolleys allow for manual positioning of
hoist and load, while geared units are ideal for applications
where precise positioning is required. CM UT geared
trolleys feature standard hand chain drop in proportion to
a 20-foot-lift hoist.
Order Online, by Phone, or by E-Mail

~ Add items to your online shopping cart ~
Click a Price of the item you wish to purchase.
PRICING FOR MODEL JLCV -UNIVERSAL TROLLEYS
Model No.
No. of
Chns.
Std.
Lift
Lift
Speed
Mtr. H.P.
3 Ph.
Ship Wt.
Plain Trolley
JLCVUTP
Geared Trolley
JLCVUTG
Motoized Trolley
JLCVUTM
1/8 Ton
JLCV0232-10
1
10
32
1/4
175
1/4 Ton
JLCV0516-10
1
10
16
1/2
175
JLCV0532-10
1
10
32
1/2
189
1/2 Ton
JLCV1016-10
1
10
16
1/2
189
JLCV1032-10
1
10
32
1
202
1 Ton
JLCV2016-10
1
10
16
1
204
2 Ton
JLCV4008-10
2
10
8
1
214
Note: Push button stations are 2-step standard 3-step station optional; Hoists are factory set at infinitely variable speed,
if other settings are required please note at the time of order.
Push button drop is 4 ft. less than lift. For special lifts, see above under accessories. Hoist equipped with 15 ft. power cord.
Add $195.19 for 3-step buttons.
JLC Hoists may require CAS field certification, consult us.
† Dual tread wheels 4" tread diameter.
** Standard trolley speeds are 35 & 75 FPM. Optional speeds available - consult us. Specify speed when ordering.
STANDARD FEATURES
five pocket load sheave FIVE-POCKET
LOAD SHEAVE
panel plate PANEL PLATE
Provides easy access to controls
and motor leads for changing
voltage on dualvoltage motors
or performing hoist maintenance.
Connection wires are numbered
to assist maintenance.
Increases chain and sheave
engagement 25% over hoists with
conventional four-pocket sheaves.
Provides smoother lifting and
reduces chain wear over four-
pocket sheaves.
multiple disc motor brake MULTIPLE DISC
MOTOR BRAKE		 limit switches LIMIT SWITCHES
Adjustable to regulate upper and
lower load travel. Brass nuts standard
for improved switch setting and
repeatability. Stainless steel limit
switch shaft standard.
Heavy duty, direct acting design
for positive load spotting and
holding.
hoist motor HOIST MOTOR mechanical overload protection device MECHANICAL OVERLOAD
PROTECTION DEVICE
Finned aluminum housing and
Class F insulation for longer life.
2-speed with 3 to 1 speed ratio
available.
Protects hoist, operator and
supporting structures from
damaging overloads, chain
jamming, and reverse phasing.
ergonomic designed push button station ERGONOMIC DESIGNED
PUSH BUTTON STATION		 chain end stop assembly CHAIN END
STOP ASSEMBLY
Fits operator’s hand for thumb or
two-handed operation. 24 Volt
Control standard for operator
safety. 115 Volt Control available
upon request. NEMA 3R (weather
resistant). Severe impact and
chemical/corrosive atmosphere
resistant.		 Fits below dead end link on
lifting chain for added measure
of safety.
Ordering Information Electric Chain Hoists
Specify the Following:
• Base Model
• Single or Two-Speed
• Voltage
• Phase		 • Lift
• P.B. Drop
• Power Cord
• Suspension		 • Special Top or Bottom Hooks
• Beam Size
• Chain Container
• Accessories
Voltage Options:
Single-Speed Voltages
115/230 Volt - 1 Phase - 60 Hertz
208 Volt - 3 Phase - 60 Hertz
230/460 Volt - 3 Phase - 60 Hertz
575 Volt - 3 Phase - 60 Hertz		 Two-Speed Voltages
208 Volt - 3 Phase - 60 Hertz
230 Volt - 3 Phase - 60 Hertz
460 Volt - 3 Phase - 60 Hertz
575 Volt - 3 Phase - 60 Hertz
Note: Consult us for voltages
not listed, additional options, or other
specialized applications.
Canadian Customers — Special Information
Models JLC and JLCCT are built in-compliance with CSA.
Please Request CSA Identification at the time of order.
Models JLCMT require additional options to meet CSA.
Options - Mainline contactor and 6-button push-button station.
CSA Adder of $903.64 for single-speed hoist and motorized trolley listed. 2-speed options available.
Please request CSA compliant hoist and motorized trolley units at the time of order.
Order Online, by Phone, or by E-Mail

~ Add items to your online shopping cart ~
Click a Price of the item you wish to purchase.
ACCESSORIES
JLC Special Lifts, P.B. Drops & Power Cords
For additional lifts - Add to 10 foot lift price
Maximum Lift
Price
Extra foot of lift
•1/8 - 1/2 Ton capacity
143
Extra foot of lift
• 1 Ton capacity
143
Extra foot of lift
• 2 Ton capacity
71
Extra foot of Push Button Drop or Power Cord
Long Lift Limit Switch - required for lifts over 50 ft.
• Single chain 51 - 173 ft.
on single chain & 25 ft. on double chain models
• Double chain 26 - 71 ft.
2 speed hoist (3:1) 3 pH only - add to single speed hoist price ***
2 speed trolley (3:1) 3 pH only - add to single speed trolley price ***

***Add $215.67 for 2-speed buttons, per pair on JLC with NEMA 4X or 6 or 8-button stations.
chain containers

CHAIN CONTAINERS
Models - To fit JLC models.
Mounting - Suspends from hoist and does not
    interfere with hoist operation. Suspension bracket
    included.
Safety - Recommended where slack chain may
    create a hazardous condition.
Chain Containers for JLC Models
Model No. Type Shipping
Wt.		 Price
JLC927-1 All models up to 20 ft. single chain, up to 10 ft. double chain - plastic 3
JLC927-2 All models up to 35 ft. single chain, up to 17 ft. double chain - plastic 4
JLC927-3 All models up to 50 ft. single chain, up to 25 ft. double chain - plastic 5
JLC927-4 All models OVER 50 ft. single chain and 25 ft. double chain - metal 25
Model Fabric Type  
Price
JLC927-20F All models up to 20 ft. single chain, up to 10 ft. double chain 4
JLC927-35F All models up to 35 ft. single chain, up to 17 1/2 ft. double chain 4
JLC927-50F All models up to 50 ft. single chain, up to 25 ft. double chain 5
JLC927-70F All models up to 70 ft. single chain, up to 35 ft. double chain 5

WEATHER RESISTANT COVERS
Models - To fit JLC models
Material - Waterproof to protect hoist in outdoor
    use.
Safety - Does not interfere with normal hoist
    operation while in place.
Order Online, by Phone, or by E-Mail

~ Add items to your online shopping cart ~
Click a Price of the item you wish to purchase.
Weather Resistant Nylon Cover for Hoists
Product Code Model No. Used on Hoist Models Capacity (Ton) Price
08790W JLC760-1 JLC0232 1/8
08791W JLC760-2 JLC0516, JLC0532 1/4
08792W JLC760-3 JLC1016, JLC1032 1/2
08793W JLC760-4 JLC2016 1
08794W JLC760-5 JLC4008 2
Order Online, by Phone, or by E-Mail

~ Add items to your online shopping cart ~
Click a Price of the item you wish to purchase.
Push Button Stations - For trolley, crane and start-stop control. Standard directions weather resistant with
interchangeable elements. Specify functions required. are marked by nameplates; for special legends, consult
us. All stations below are Nema 4X weather resistant with interchangeable elements. Specify functions required.		 Price
2 Button Station, Single Speed
4 Button Station, Single Speed, or Momentary Start-Stop
6 Button Station, Single Speed, or Momentary Start-Stop
8 Button Station, Single Speed, or Momentary Start-Stop
Substitute Two Speed - Per Pair (required on Nema 4X stations only)
Substitute Three Speed - Per Pair (required on Nema 4X stations only)
Substitute Maintained Start-Stop - Per Pair
External Chain Strain Relief on P.B. Cord
6 Ft. Pendant Drop
Special Pendant Cord Lengths - Per Ft. over 6 Ft., Add $60.24 to Price
Kellems Cord Grip - Each
Outrigger Arm, Rigid (with CT or MT Trolley Suspension only) 3 Ft.
Retractable Coiled Power Cord - 25 Ft.-retracts to 4 Ft. ( 3 or 4 conductor # 14)
Collector Mounting Arm - 20 In. long, Per Arm
Insul-8 Collectors & Mountings (30 Amp.)
Two Collectors, One Arm (single phase)
Three Collectors, One Arm (three phase)
Two Arm Arrangement - Adder for Extra Arm
Special Motor Voltage
200-208 Volt, 3 Phase, 60 Hz
N/C
575 Volt, 3 Phase, 60 Hz
N/C
220/380 Volt, 3 Phase 50 Hz
P.O.A.*
Additional Options
Safety Lugs for 2-Wheel Trolley (where applicable)
P.O.A.*
Auxillary Contacts (N.O. or N.C.) - Each Contactor
Trolley Limit Switch - Lever Type, customer to supply Actuating Bar
Special Color Paint - Air dry enamel: white, black, red, yellow, silver
Epoxy Paint
Magnaflux Inspection of Hook
Magnaflux Inspection of Hook per ASTM A275 Spec's with Documentation
115 Volt Control Circuit
N/C
Fused & Grounded Transformer (Secondary) - Per Transformer
Motor Thermostat - Per Motor
Controls for Tandem Operation - includes 3-Position Selector Switch
P.O.A.*
Stainless Steel Limit Switch Shaft
Standard
Zinc plated Hook
Bullard Swivel Gate Hooks
For all JLC Models up to and including EC4008 (Top or Bottom Hook)
Shur-Loc Hooks®
For all JLC Models up to and including 2 Ton (Top or Bottom Hook)
Note: Some accessories may require CSA Field Certification - Consult us. * Price on application
Coffing Model JLCV Trolley Suspension, Chain Hoist, Infinitely Variable Speed, Two-Speed Motorized Trolley, Plain Trolley,
Motorized Trolley, Variable Speed Electric Chain Hoist, Motor Brake, Limit Switches, Overload Protection, Push Button Station,
and Electric Chain Hoists from your source for material handling equipment.

Back to Product Category
Home - Order - Search - Quote- Info - About Us - My Account - Shopping Cart