MODEL JLC TROLLEY SUSPENSION
trolley suspension electric chain hoist
JLCCT and JLCMT Models - Plain and motorized
trolley suspensions with all the features of the basic
JLC models for added flexibility in a variety of applications.
MODE JLCCT / PLAIN TROLLEY - For manual positioning
of hoist and load.
MODE JLCMT / MOTORIZED TROLLEY - For faster
positioning of hoist and load over longer distances. 35 or
75 FPM speeds standard - other speeds available.
Trolley brake optional.
VOLTAGES - 115/230 - single phase; 230/460, 208, 380, 415,
575 - three phase, 60 hertz standard, 50 hertz available.
TWO-SPEED MOTORIZED TROLLEY MODELS - Optional
with 3 to 1 speed ratio, three-phase, single voltage only.
WRAP-AROUND SIDE PLATES - Act as safety lugs and as
bumpers to protect wheels. Available to fit American Standard I-Beams,
wide- flange, and patented track beams.
PRECISION TROLLEY WHEELS - Machined, cast iron wheels
with sealed, lifetime lubricated ball bearings for extended trolley life.
Motorized trolley wheels are heat treated for added durability, with
bronze and stainless steel wheels optional.
TROLLEY DESIGN - 4-wheel design negotiates 48” minimum
radius curve, including patented track applications (60” for JLCCT
2-Ton only). Specify track type and beam size.
LIFETIME WARRANTY
SPECIFICATIONS
Capacity
Model No.
Trolley‡
Mount
JLCCT
Hdrm (in.)
JLCMT
Hdrm (in.)
JLCCT
Flange*
Width (in.)
Beam
Ht. (in.)
Min.
Rad. Curve
(in.)
JLCCT
Net Wt.
(lb.)
JLCMT
Net Wt.
(lb.)
(lb.)
(kg.)††
(Ton)
250
125
1/8
JLC(†)-0232
C
17 15/16
17 15/16
3-8
5-12
48
87
173
500
250
1/4
JLC(†)-0516
C
17 15/16
17 15/16
3-8
5-12
48
87
173
500
250
1/4
JLC(†)-0532
C
17 15/16
17 15/16
3-8
5-12
48
99
185
1000
500
1/2
JLC(†)-1016
C
17 15/16
17 15/16
3-8
5-12
48
91
185
1000
500
1/2
JLC(†)-1032
C
17 15/16
17 15/16
3-8
5-12
48
112
198
2000
1000
1
JLC(†)-2016
C
17 15/16
17 15/16
3-8
5-12
48
114
200
4000
2000
2
JLC(†)-4008
C
20 5/8
20 5/8
3-8
6-18
60
156
210
† Specify JLCCT for plain trolley and JLCMT for motorized trolley models.
†† Metric rated option available.
† C = Cross mount, standard on all JLC trolley models.
* For JLCMT models, standard flange adjustment is 3.33 - 6”. Consult us for special beam size options.
STANDARD FEATURES
five pocket load sheave FIVE-POCKET
LOAD SHEAVE
panel plate PANEL PLATE
Provides easy access to controls
and motor leads for changing
voltage on dualvoltage motors
or performing hoist maintenance.
Connection wires are numbered
to assist maintenance.
Increases chain and sheave
engagement 25% over hoists with
conventional four-pocket sheaves.
Provides smoother lifting and
reduces chain wear over four-
pocket sheaves.
multiple disc motor brake MULTIPLE DISC
MOTOR BRAKE		 limit switches LIMIT SWITCHES
Adjustable to regulate upper and
lower load travel. Brass nuts standard
for improved switch setting and
repeatability. Stainless steel limit
switch shaft standard.
Heavy duty, direct acting design
for positive load spotting and
holding.
hoist motor HOIST MOTOR mechanical overload protection device MECHANICAL OVERLOAD
PROTECTION DEVICE
Finned aluminum housing and
Class F insulation for longer life.
2-speed with 3 to 1 speed ratio
available.
Protects hoist, operator and
supporting structures from
damaging overloads, chain
jamming, and reverse phasing.
ergonomic designed push button station ERGONOMIC DESIGNED
PUSH BUTTON STATION		 chain end stop assembly CHAIN END
STOP ASSEMBLY
Fits operator’s hand for thumb or
two-handed operation. 24 Volt
Control standard for operator
safety. 115 Volt Control available
upon request. NEMA 3R (weather
resistant). Severe impact and
chemical/corrosive atmosphere
resistant.		 Fits below dead end link on
lifting chain for added measure
of safety.
Ordering Information Electric Chain Hoists
Specify the Following:
• Base Model
• Single or Two-Speed
• Voltage
• Phase		 • Lift
• P.B. Drop
• Power Cord
• Suspension		 • Special Top or Bottom Hooks
• Beam Size
• Chain Container
• Accessories
Voltage Options:
Single-Speed Voltages
115/230 Volt - 1 Phase - 60 Hertz
208 Volt - 3 Phase - 60 Hertz
230/460 Volt - 3 Phase - 60 Hertz
575 Volt - 3 Phase - 60 Hertz		 Two-Speed Voltages
208 Volt - 3 Phase - 60 Hertz
230 Volt - 3 Phase - 60 Hertz
460 Volt - 3 Phase - 60 Hertz
575 Volt - 3 Phase - 60 Hertz
Note: Consult us for voltages
not listed, additional options, or other
specialized applications.
Canadian Customers — Special Information
Models JLC and JLCCT are built in-compliance with CSA.
Please Request CSA Identification at the time of order.
Models JLCMT require additional options to meet CSA.
Options - Mainline contactor and 6-button push-button station.
CSA Adder of $634.50 (call or email to add to price) for single-speed hoist and motorized trolley listed. 2-speed
options available. Please request CSA compliant hoist and motorized trolley units at the time of order.
Order Online, by Phone, or by E-Mail

~ Add items to your online shopping cart ~
Click a Price of the item you wish to purchase.
PRICING
Model No.†† No.
of
Chns.		 Std.
Lift		 Lift
Speed		 Mtr.
H.P.
1 Ph.		 Mtr.
H.P.
3 Ph.		 JLCCT - Plain Trolley JLCMT** - Motorized Trolley
A Dim. Ship
Wt.		 Price A Dim. Ship
Wt.		 Price
1/8 Ton
JLC0232-10 1 10 32 1/4 1/4 17 15/16 89 $2,647
17 15/16
175
 $5,304
JLC0232-15 1 15 32 1/4 1/4 17 15/16 93 $2,777
17 15/16
179
 $5,433
JLC0232-20 1 20 32 1/4 1/4 17 15/16 97 $2,908
17 15/16
183
 $5,563
1/4 Ton
JLC0516-10 1 10 16 1/2 1/2 17 15/16 89 $2,766
17 15/16
175
 $5,423
JLC0532-10 1 10 32 1/2 1/2 17 15/16 103 $2,908
17 15/16
189
 $5,564
JLC0516-15 1 15 16 1/2 1/2 17 15/16 93 $2,897
17 15/16
179
 $5,552
JLC0532-15 1 15 32 1/2 1/2 17 15/16 107 $3,038
17 15/16
193
 $5,694
JLC0516-20 1 20 16 1/2 1/2 17 15/16 97 $3,027
17 15/16
183
 $5,683
JLC0532-20 1 20 32 1/2 1/2 17 15/16 111 $3,168
17 15/16
197
 $5,824
1/2 Ton
JLC1016-10 1 10 16 1/2 1/2 17 15/16 103 $2,908
17 15/16
189
 $5,564
JLC1032-10 1 10 32 1 1 17 15/16 116 $3,091
17 15/16
202
 $5,748
JLC1016-15 1 15 16 1/2 1/2 17 15/16 107 $3,038
17 15/16
193
 $5,694
JLC1032-15 1 15 32 1 1 17 15/16 120 $3,222
17 15/16
206
 $5,878
JLC1016-20 1 20 16 1/2 1/2 17 15/16 111 $3,168
17 15/16
197
 $5,824
JLC1032-20 1 20 32 1 1 17 15/16 124 $3,352
17 15/16
210
 $6,007
1 Ton
JLC2016-10 1 10 16 1 1 17 15/16 118 $3,192
17 15/16
204
 $5,848
JLC2016-15 1 15 16 1 1 17 15/16 122 $3,322
17 15/16
208
 $5,978
JLC2016-20 1 20 16 1 1 17 15/16 126 $3,452
17 15/16
212
 $6,108
2 Ton
JLC4008-10 2 10 8 1 1 20 5/8 160 $3,824
20 5/8
214
JLC4008-15 2 15 8 1 1 20 5/8 168 $4,051
20 5/8
222
JLC4008-20 2 20 8 1 1 20 5/8 176 $4,278
20 5/8
230
Note: Push-button drop is 4 Ft. less than lift For special lifts, see below. Hoist equipped with 15 Ft. power cord except
JLCMT models - power cord not included (optional - specify if needed).
For JLC with geared trolley - consult us.
** Standard trolley speeds are 35 & 75 FPM. Optional speeds available - consult us. Specify speed when ordering.
†† Request CSA Compliant Hoist at the time of order. JLCMT models require mainline contactor and 6-button pushbutton
station.
Order Online, by Phone, or by E-Mail

~ Add items to your online shopping cart ~
Click a Price of the item you wish to purchase.
ACCESSORIES
JLC Special Lifts, P.B. Drops & Power Cords
For additional lifts - Add to 10 foot lift price
Maximum Lift
Price
Extra foot of lift
•1/8 - 1/2 Ton capacity
143
Extra foot of lift
• 1 Ton capacity
143
Extra foot of lift
• 2 Ton capacity
71
Extra foot of Push Button Drop or Power Cord
Long Lift Limit Switch - required for lifts over 50 ft.
• Single chain 51 - 173 ft.
on single chain & 25 ft. on double chain models
• Double chain 26 - 71 ft.
2 speed hoist (3:1) 3 ph only - add to single speed hoist price ***
2 speed trolley (3:1) 3 ph only - add to single speed trolley price ***
***Add $151.43 for 2-speed buttons, per pair on JLC with NEMA 4X or 6 or 8-button stations.
chain containers

CHAIN CONTAINERS
Models - To fit JLC models.
Mounting - Suspends from hoist and does not
    interfere with hoist operation. Suspension bracket
    included.
Safety - Recommended where slack chain may
    create a hazardous condition.
Chain Containers for JLC Models
Model No. Type Shipping
Wt.		 Price
JLC927-1 All models up to 20 ft. single chain, up to 10 ft. double chain - plastic 3 $63.45
JLC927-2 All models up to 35 ft. single chain, up to 17 ft. double chain - plastic 4 $77.83
JLC927-3 All models up to 50 ft. single chain, up to 25 ft. double chain - plastic 5 $182.74
JLC927-4 All models OVER 50 ft. single chain and 25 ft. double chain - metal 25 $629.42
Model Fabric Type  
Price
JLC927-20F All models up to 20 ft. single chain, up to 10 ft. double chain 4 $179.35
JLC927-35F All models up to 35 ft. single chain, up to 17 1/2 ft. double chain 4 $219.96
JLC927-50F All models up to 50 ft. single chain, up to 25 ft. double chain 5 $284.26
JLC927-70F All models up to 70 ft. single chain, up to 35 ft. double chain 5 $324.86
Order Online, by Phone, or by E-Mail

~ Add items to your online shopping cart ~
Click a Price of the item you wish to purchase.
weather resistant covers

WEATHER RESISTANT COVERS
Models - To fit JLC models
Material - Waterproof to protect hoist in outdoor
    use.
Safety - Does not interfere with normal hoist
    operation while in place.
Weather Resistant Nylon Cover for Hoists
Product Code Model No. Used on Hoist Models Capacity (Ton) Price
08790W JLC760-1 JLC0232 1/8
08791W JLC760-2 JLC0516, JLC0532 1/4
08792W JLC760-3 JLC1016, JLC1032 1/2
08793W JLC760-4 JLC2016 1
08794W JLC760-5 JLC4008 2
Order Online, by Phone, or by E-Mail

~ Add items to your online shopping cart ~
Click a Price of the item you wish to purchase.
Push Button Stations - For trolley, crane and start-stop control. Standard directions weather resistant with
interchangeable elements. Specify functions required. are marked by nameplates; for special legends, consult
us. All stations below are Nema 4X weather resistant with interchangeable elements. Specify functions required.		 Price
2 Button Station, Single Speed
4 Button Station, Single Speed, or Momentary Start-Stop
6 Button Station, Single Speed, or Momentary Start-Stop
8 Button Station, Single Speed, or Momentary Start-Stop
Substitute Two Speed - Per Pair (required on Nema 4X stations only)
Substitute Three Speed - Per Pair (required on Nema 4X stations only)
Substitute Maintained Start-Stop - Per Pair
External Chain Strain Relief on P.B. Cord
6 Ft. Pendant Drop
Special Pendant Cord Lengths - Per Ft. over 6 Ft., Add $42.30 to Price
Kellems Cord Grip - Each
Outrigger Arm, Rigid (with CT or MT Trolley Suspension only) 3 Ft.
Retractable Coiled Power Cord - 25 Ft.-retracts to 4 Ft. ( 3 or 4 conductor # 14)
Collector Mounting Arm - 20 In. long, Per Arm
Insul-8 Collectors & Mountings (30 Amp.)
Two Collectors, One Arm (single phase)
Three Collectors, One Arm (three phase)
Two Arm Arrangement - Adder for Extra Arm
Special Motor Voltage
200-208 Volt, 3 Phase, 60 Hz
N/C
575 Volt, 3 Phase, 60 Hz
N/C
220/380 Volt, 3 Phase 50 Hz
P.O.A.*
Additional Options
Safety Lugs for 2-Wheel Trolley (where applicable)
P.O.A.*
Auxillary Contacts (N.O. or N.C.) - Each Contactor
Trolley Limit Switch - Lever Type, customer to supply Actuating Bar
Special Color Paint - Air dry enamel: white, black, red, yellow, orange, green, silver
Epoxy Paint
Magnaflux Inspection of Hook
Magnaflux Inspection of Hook per ASTM A275 Spec's with Documentation
115 Volt Control Circuit
N/C
Fused & Grounded Transformer (Secondary) - Per Transformer
Motor Thermostat - Per Motor
Controls for Tandem Operation - includes 3-Position Selector Switch
P.O.A.*
Stainless Steel Limit Switch Shaft
Standard
Zinc plated Hook
Bullard Swivel Gate Hooks
For all JLC Models up to and including EC4008 (Top or Bottom Hook)
Shur-Loc Hooks®
For all JLC Models up to and including 2 Ton (Top or Bottom Hook)
Note: Some accessories may require CSA Field Certification - Consult us. * Price on application
Coffing Model JLC Trolley Suspension, Chain Hoist, Infinitely Variable Speed, Two-Speed Motorized Trolley, Plain Trolley,
Motorized Trolley, Variable Speed Electric Chain Hoist, Motor Brake, Limit Switches, Overload Protection, Push Button
Station, and Electric Chain Hoists from your source for material handling equipment.