Back to Product Category
MODEL
A1 HI JACK
|
|
|
|
 |
|
LIFT
HEAVY LOADS THIS EASY ECONOMICAL WAY
AND SAVE UP TO 75% ON INSTALLATION TIME! |
|
|
|
• One man
can set up and operate in minutes; heaviest part weighs
only 40 lbs.
• HI-JACK (free standing) lifts 500 lbs. to 10 ft.; with optional ceiling
or wall stabilizer, to 15 ft.
• Two HI-JACK (using optional ceiling or wall stabilizers and 3"
std.
pipe platform extensions) lifts 2,000 lbs., To 15 ft.
• Average lift speed of a 500 lb. load is 3 ft. per minute. |
|
|
|
A
VERSATILE, MULTI-PURPOSE TIME AND MONEY SAVER
FOR LIFTING LOADS ON THE JOB...INDOORS OR OUT. |
|
|
|
The husky HI-JACK
with 11-gauge, tubular stands and sturdy platform
with "friction-free" roller action, can be assembled as simply
as an erector
set to accommodate any job condition or ceiling height up to 17 feet. |
|
|
|
We also have the "Shorty" HI-JACK (shown in figure 9 below) this
is being used as a die setting table and lift truck. Wheels and casters
provide maneuverability for a variety of tasks such as warehouse
stacking, truck loading or unloading, etc.
Overall height , with 3" casters. 5'6".
Shipping Weight 125# |
*NOTE: Casters are not included
on this model. |
|
|
|
 |
|
|
|
 |
|
|
 |
|
After
measuring wall height
to correctly position optional
stabilizer. HI-JACK is easily
swung into place. |
To
compensate for uneven ground
conditions, the base may be shimmed
with boards and shingles shown above. |
To jack up platform, position
wing latch as indicated by pointing
arrow.
To lower platform, position
wing latch as indicated by pointing
arrow. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
This picture shows the optional wall stabilize
can be clamped to a parapet wall illustrating
again how adaptable this equipment really is-
wherever awkward or bulky loads must be lifted
easily, quickly, and safely. |
|
|
Load
is easily skidded onto roof using two lengths of
1 1/4" pipe inserted into platform prongs. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
|
|
 |
16" pipe is positioned and supported with HI-JACKS in
Tandem. 3" pipe is placed over the prongs of both Jacks,
while bases are clamped together with standard C-clamp
providing a unit which will lift up to 2,000 lbs. |
With
flanges and complete section welded
together four HI-JACKS place this 16" pipe as
close to the ceiling as required. Actually no head
room is needed when using HI-JACKS |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
|
 |
|
|
 |
Here the HI-JACK is being
used as a die setting table and
lift truck. Wheels and casters
provide maneuverability for a
variety of tasks such as ware-
house stacking, truck loading
or unloading, etc. as shown
with caster. |
Optional
platform exten-
sions add 24" to the height
of the platform so that even
flat plates can be mounted
direct to ceiling. Sold in
pairs-cannot be used singly.
Optional base extension
adds 12" to length. Provides
additional support for over-
hanging loads. |
This
1700 lb. steel block is easily lifted and
moved about using 3" pipe slipped over the plat-
form prongs. Heavy boilers and furnaces may be
similarly lifted and set in place or the load may be
carried on top of platform. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
|
Order
Online, by Phone, or by E-Mail |
|
|
|
~ Add
items to your online shopping cart ~
Click the Model No. of the item you wish
to purchase. |
|
|
PRICING |
Model
No. |
Description |
Cap. |
Shipping
Wgt. |
Price |
|
Lifting
Height 15' w/5 posts - Casters not included
| 500# |
162
lbs. |
$2,590.00 |
|
Overall
Height 5'6" Including 3" casters
| 500# |
125
lbs. |
$2,192.00 |
|
Overall
Height 5'8" Including 5" casters
| 500# |
125
lbs. |
$2,300.00 |
|
|
|
|
|
|
 |
|
|
|
|
|
Model A-1 HI-JACK includes all parts #1
through 6, other components part #7 through
15 are optional... components may also be
ordered individually as needed, see listings below. |
|
|
|
|
|
Model A-1 Shorty
HI-JACK includes all parts
#1 throught 4 |
|
|
1. 30" x 30"
Base
2. 18" x 24" Platform (w/jack)
3. Platform Jack Handle
4. 4-foot post section
5. 2-foot post section
6. 1-foot post section
7. Ceiling stab. screw jack (optional)
8. Ceiling stab. screw jack handle (optional)
9. Wall stabilizer clamp (optional)
10. Wall stabilizer center block (optional)
11. Wall stabilizer corner (optional)
12. 3" straight wheel w/bracket (EXTRA)
13. 3" caster w/bracket (EXTRA)
14. Platform height extension (EXTRA)
15. Base extension (EXTRA) |
|
|
|
|
|
Please
call us for prices on optional equipment. |
|
|
|
|
|
|
|
|
|
|
Order
Online, by Phone, or by E-Mail |
|
|
|
~ Add
items to your online shopping cart ~
Click the Model No. of the item you wish
to purchase. |
|
|
OPTIONAL
PRICING |
Model
No. |
Description |
Price |
|
30"
x 30" Base |
$797.10 |
|
18"
x 24" Platform (w/jack) |
$1,149.40 |
|
Platform
Jack Handle |
$30.20 |
|
4'
Post Section |
$285.40 |
|
2'
Post Section |
$198.00 |
|
1'
Post Section |
$144.00 |
|
Ceiling
Stabilizer Screw Jack |
$198.00 |
|
Ceiling
Stabilizer Screw Jack Handle |
$9.00 |
|
Wall
Stabilizer Clamp |
$41.10 |
|
Wall
Stabilizer Center Block |
$36.60 |
|
Wall
Stabilizer Corner Block |
$43.70 |
|
3"
Straight Wheel w/Bracket |
$99.30 |
|
3"
Caster w/Bracket |
$86.40 |
|
5"
Swivel Caster w/Bracket |
$115.20 |
|
Height
Extension (Pair) |
$432.00 |
|
Base
Extension (less casters) |
$295.70 |
|
|
A1 Hi-Jack, Elevating Work
Platform, Superlift, Installation Lifts, Maintenance Lifts, Material Lifts,
Portable Lifts, Super Hoist, and
Vermette Lifts from your source for material handling equipment. |
Back to Product Category
|
