|
|
 |
|
Order
Online, by Phone, or by E-Mail |
|
|
|
~ Add
items to your online shopping cart ~
Click the Price of the item you wish to purchase. |
|
|
 |
|
Aluminum
powder coated table frames
with recycled plastic lumber slats.
Galvanized steel center posts available
in a variety of mounting options, with
or without umbrella holes. Choose the
color for both the top and legs. Matching
chairs and benches available. Assembly
& anchoring required.
Size: 57” x 36” x 29”
Weight: 180 Lbs.
Material: Steel, Aluminum, Wood
Special Features: Surface mount
Hardware: Hardware kit (400255)
*Assembly required. ADA Compliant |
|
|
|
|
|
 |
|
|
|
|
|
|
|
|
|
Model: 1037
Price: $998.50 |
|
|
|
|
|
COLORS
FOR PANEL |
|
 |
|
 |
|
COLORS
FOR FRAME |
|
 |
|
 |
|
TECHNICAL
INFORMATION - POWDURA® Epoxy Powder Coating |
|
PRODUCT
DESCRIPTION
EAS6-00025
ZINC RICH PRIMER
POWDURA® Epoxy Powder Coating is recommended for a broad range
of interior functional and
decorative applications.
APPLICATION
Cure Schedule: 10 min @ 205°C (401°F)
Film Thickness Range: 1.5-1.8 mils
ATTRIBUTES
Specific Gravity: 2.83 +/-0.05
Coverage at 1.0 mil: 67.8 sq.ft/lb
60 Gloss: Visual
Adhesion: No Failure with 1/16in. squares(5B) (ASTM D-3359)
Flexibility: Pass 1/8" Mandrel Bend (ASTM D-522)
Pencil Hardness: H-2H (ASTM D-3363)
Impact Resistance(dir/rev): 160/160 (ASTM D-2794)
Other Notes
SaltSpray Performance: When top coated with TGIC polyesters,urethanes
and fluoroploymers, testing showed
4-5 mm undercut at 5000 hours on Bonderite 1000
Storage:
POWDURA® Powder Coatings should be kept in a dry and cool area at
temperatures below 80°F (26.7° C).
Shelf life is approximately 12 months.
When not in use, store powder in sealed containers: fine powders are hygroscopic.
Substrate Preparation
General: Substrate should be free of grease, oil, dirt, fingerprints,
drawing compounds, any contamination, and
surface preparation treatments to ensure optimum adhesion and coating
performance properties. The use of a
chemical conversion coating prior to the application of a powder coating
is strongly recommended. Consult Metal
Preparation Brochure CC-T1 for additional details.
Aluminum: A minimum of a 5-stage chrome phosphate metal treatment, or
equivalent, is required for good adhesion
and optimum coating performance properties.
Testing:
Due to the wide variety of substrates, surface preparation methods, application
methods, and environments,
the customer should test the complete system for adhesion and compatibility
prior to full-scale application.
The properties listed are typical and should not be construed as the actual
specification.
Product Limitations:
Contact your Sherwin-Williams Representative where use of this product
at higher than recommended film
thickness may be required.
APPLICATION:
Powder coatings must be applied using suitable electrostatic equipment.
Consult your Sherwin-Williams
Representative regarding unique applications.
CAUTIONS:
Thoroughly review product label for safety and cautions prior to using
this product. Please direct any questions
or comments to your local Sherwin-Williams facility.
CAUTION! Causes eye irritation, causes skin irritation, may cause
allergic skin reaction, respiratory irritant, dust
may cause eye and respiratory irritation, dust may form an explosive mixture
in air. Avoid breathing dust. Avoid
contact with eyes and prolonged or repeated contact with skin. Use protective
clothing and NIOSH approved
respirator. Do not use near sparks or open flame or any type of ignition
source. Wash thoroughly after handling.
Use only with adequate ventilation.
FIRST AID:
If on SKIN: Wash thoroughly with soap and water.
If in EYES: Flush with water immediately and procure medical attention.
The area adjacent to the coating operation
should be properly ventilated. Cure ovens must be exhausted to the outside
atmosphere. All dusts are respiratory
irritants, inhalation of the dust should be avoided. To avoid static electricity
buildup, properly ground all equipment.
Provide dust collection equipment with adequate explosion venting; dust
clouds of any finely divided organic material
can be ignited by open flame or electrical sparks.
DO NOT TAKE INTERNALLY. KEEP OUT OF REACH OF CHILDREN. FOR INDUSTRIAL
USE
ONLY. REFER TO MATERIAL SAFETY DATA SHEET FOR ADDITIONAL INFORMATION.
Note:
Product Data Sheets are periodically updated to reflect new information
relating to the product. It is important that
the customer obtain the most recent Product Data Sheet for the product
being used. The information, rating and
opinions stated above pertain to the material currently offered and represent
the results of tests believed to be reliable.
However, due to variations in customer handling and methods of application
which are not known or under our
control, The Sherwin-Williams Company cannot make any warranties or guaranties
as to the end results. |
|
HYPEL™
LLDPE 3170 UV 8 NATURAL ** LINEAR LOW DENSITY POLYETHYLENE, 7.0 MFI |
|
TYPICAL
PROPERTY VALUES† |
|
PROPERTY |
METHOD |
UNIT |
VALUE |
PHYSICAL |
Specific
Gravity |
ASTM
D792 |
|
0.935 |
Metal
flow (190°C / 2.16 kg) |
ASTM
D1238 |
g/10
min |
7 |
MECHANICAL
@ 73°F |
Tensile
Strength at Yield |
ASTM
D638 |
psi |
2720 |
MPa |
18.8 |
Flexural
Modulus - 1% Secant |
ASTM
D790 |
psi |
100,000 |
MPa |
655 |
ARM
Impact 1/8" (Notched) @-40°C |
ASTM
D562B |
ft-LB/in |
79 |
Hardness
(Shore D) |
ASTM
D785 |
- |
- |
THERMAL |
264
psi - ASTM, 1.80 MPa-ISO |
ASTM
D648 |
°C |
35 |
°F |
95 |
66
psi - ASTM, 0.45 MPa-ISO |
ASTM
D648 |
°C |
52 |
°F |
125 |
OTHER |
ESCR
(100% IGEPAL) |
|
|
>1000 |
|
|
**When
used unmodified for food contact applications, this copolymer will comply
with the U.S. Food and Drug
Administration Food Additive Regulation 21 CFR 177.1520(c)3.1a. This section
does not include use in packing
or holding food during cooking. This product is limited to use in contact
with food only under the conditions of use
C through H described in table 2 of Sec. 176.170(c), and when contacting
fatty foods of Types III, IVA, V, VII-A,
and IX described in table 1 of Sec. 176.170(c), the finished articles are
to have a volume of at least 18.9 liters (5
gallons). The uses cited are subject to good manufacturing practices and
any limitations, which are part of the regu-
lations. The regulations should be consulted for complete details.
†The data listed here fall within the normal range of product
properties, but they should not be used to establish speci-
fication limits or used alone as a basis for design. This information is
not intended as a warranty of any kind. Buyers
must make their own representative test and assume all risks of use, whether
used alone or in combination with other
products. Entec Polymers, LLC assumes no obligation or liability of any
advice furnished by it or results obtained
with respect to these products. All warranties expressed or implied including
warranties of merchantability for a
particular purpose or use are excluded and disclaimed. Entec Polymers, LLC
assumes no liability for use of products
in infringement of any patent. The foregoing limitation of remedy and exclusion
of liability is reflected in and is part
of the consideration for the price, at which the products are sold by Entec
Polymers, LLC. All data displayed herein
has been obtained via testing of injected molded specimens of natural color.
Pigmentation may affect certain
properties to various degrees. |
|
Lorna Dining Table, Aluminum
Table, Galvanized Steel Tables, In-ground Tables, Polysteel Tables, Recycled
Plastic Tables,
Site Furnishing, Park Tables, Outside Tables, Steel Tables, and Tables
from your source for material handling equipment. |
|
