Belt Conveyors, Floor-to-Floor Incline Conveyor, Roller Bed, Conveyors

Material Handling Equipment - 1-800-544-3137 - Service - Installation - Custom Fabrication


Categories

Back to Product Category

MODEL RBI
FLOOR-TO-FLOOR INCLINE CONVEYOR (ROLLER BED)
	The Model RBI is a floor-to-floor incline conveyor. It is equipped with an adjustable double nose-over at the discharge end to insure a smooth transfer from the incline to horizontal plane. Inclines are easily adjusted up to 30°. This conveyor can also be used as a booster conveyor in gravity flow systems

		• 12 Belt Widths • Center Drive • Reversible • Brake Kit • System Ends • Double Nose-over • Pop-out Roller • Powered Feeder • Ceiling Hangers Available • Adjustable MS-Type Floor Supports Available • Undertrussing (18", 24", & 30" OAW Stockyard Only

SEE BOTTOM OF PAGE FOR INCLINE LIFT GUIDE POWERED BELT CONVEYORS


STANDARD SPECIFICATIONS

BELT - Black Trackmate 120 Roughtop with PVC cover. Clipper lacing.		TAKE-UP PULLEY - 4 in. dia. with 1 in. dia. shaft at bearings or 6 in. dia. with 1-3/16 in. dia. shaft at bearings, machine crowned.

BED - Roller bed with 1.9 in. dia. roller x 16 ga. galvanized tube spaced every 6 in. Mounted in 6-1/2 in. x 12 ga. powder painted, formed steel channel frame. Standard 4 ft., 6 ft., 8 ft., and 10 ft. long sections bolt together with splice plates.

		TAKE-UP - Take-ups in center drive provides 16 in. of belt take-up.

		SNUB IDLER/NOSE-OVER ROLLERS - Adjustable 2-1/8 in. dia. or 2-1/2 in. dia. pre- lubricated ball bearings. Snub guards included.

DOUBLE NOSE-OVER - A 26 in. long horizontal and a 12 in. long nose-over section provides a two-step transition of product from incline to horizontal. Provides up to 30° incline adjustment.

		RETURN IDLER - Adjustable 1.9 in. dia., pre- lubricated ball bearings.

		BEARINGS - Sealed, pre-lubricated, self-aligning, ball bearings on drive, tail and take-up pulley.

LOWER POWERED FEEDER - Chain type driven from tail pulley of inclined conveyor. Supports not included in base price.

		SPEED REDUCTION - Sealed worm gear C-Face speed reducer. No. 50 roller chain to drive pulley.

CENTER DRIVE - Located on the incline section. Chain guard located on left hand side.

		MOTOR - 1 HP-208/230/460/575V-3 Ph. 60 Hz. Totally Enclosed C-Face "SSB" Brake Motor (6 ft./lb).

DRIVE PULLEY - 8 in. dia. with 1-7/16 in. dia. shaft at bearings, fully lagged.

		BELT SPEED - Constant 65 FPM.

		CAPACITY - Maximum load per linear foot of conveyor 225 lbs. NOT TO EXCEED capacity in chart.

TAIL PULLEY - 4 in. dia. with 1 in. dia. shaft at bearings or 6 in. dia. with 1-3/16 in. dia. shaft at bearings, machine crowned.

	FLOOR SUPPORTS - Now supplied as optional equipment.
	FLOOR SUPPORTS - Now supplied as optional equipment.

BR	BELT WIDTH	OAW	FEEDER LENGTH
13"	10"	16"	35 1/2"
15"	12"	18"	35 1/2"
17"	14"	20"	50 1/2"
19"	16"	22"
21"	18"	24"
23"	20"	26"
25"	22"	28"
27"	24"	30"	67 1/2"
31"	28"	34"	79 1/2"
33"	30"	36"	79 1/2"
37"	34"	40"	91 1/2"
39"	36"	42"	91 1/2"

LOAD CAPACITY CHART 25° INCLINE @ 65 FPM W/ROUGHTOP BELT
HP	BELT WIDTHS TO	LENGTHS UP TO
		14'	44'
		DISTRIBUTED LOAD (LBS.)
1	22"	605	585
	30"	595	565
	36"	585	545
2	22"	1245	1225
	30"	1235	1205
	36"	1225	1185


OPTIONAL EQUIPMENT

	FLOOR SUPPORTS–MS Type floor supports are available with a wide range of adjustment. Specify top of belt or roller elevation. One support required at every bed joint and ends of conveyor. Holes in feet for lagging to floor. Knee braces recommended above MS-3 support.	ROLLER CENTERS - Tread rollers spaced on 3 in., 9 in., or 12 in. centers.

		PULLEYS - 6 in. dia. tail pulley with 1-3/16 in. dia. shaft at bearings in place of 4 in. when not furnished as standard.

		CEILING HANGERS - 5/8 in. dia. x 8 ft. long unplated rods fully threaded. Other lengths and galvanized rods available.

BELT - Brown Polymate Roughtop w/Nitrile cover, Pure Gum Rubber Roughtop.


BELT SPEED - Other constant and variable speeds V-belt drive supplied on speeds under 20 FPM (1 HP), 46 FPM (2 HP). NOTE: Capacity affected with speed change.
		UNDERTRUSSING - Available in place of ceiling hangers. Maximum bed length 40 ft. Maximum overall width 30 in.

		MOTORS - Energy efficient, single phase, other characteristics. 2 HP maximum.

V-BELT DRIVE - V-belt supplied between motor and reducer. Allow 65 in.

		ELECTRICAL CONTROLS–Non-reversing and reversible magnetic starters and push button stations. AC variable frequency drive.

O-RING DRIVE CHAIN–With sealed in lubricant (Recommended for applications that do not permit regular lubrication).


GUARD RAILS–Adjustable Universal Channel Guard Rail, overlapping fixed channel (one direction), non-overlapping fixed channel (bi-directional).


			Order Online, by Phone, or by E-Mail
			~ Add items to your online shopping cart ~ Click a Price of the item you wish to purchase.

PRICES FOR COMPLETE CONVEYOR INCLUDE:

* Black Trackmate 120 Roughtop with PVC Cover

* Totally Enclosed Chain Guard

* 1.9" Dia. x 16 ga. Galvanized Roller (Rollers on 6"
Centers) in a 6-1/2" x 12 ga. Channel Frame

* 65 FPM Constant Belt Speed

* System Ends

* Double Noseover (25° Maximum Incline located
2 ft. 2 in. from Discharge End)

* Standard Powered Feeder

* 1 HP—”C” Face Totally Enclosed “SSB” Brake
Motor 208/230/460/575 Volt 3 Ph.-60 Hz.
(Specify Exact Voltage)

* "C" Face Speed Reducer - Sealed Worm Gear

* Less Supports

* Less Electrical Controls

SIZE TO ORDER Overall Length	Bed Length "L"	Belt Widths		Overall Length "A" 6" Dia.	Belt Widths
		12"	18"		24"	30"	36"
					Overall Frame Widths
		18"	24"		30"	36"	42"
13'-10"	10'	$8,871	$9,487	14'-0"	$10,464	$11,081	$11,698
15'-10"	12'	$9,075	$9,740	16'-0"	$10,766	$11,431	$12,097
17'-10"	14'	$9,280	$9,993	18'-0"	$11,067	$11,780	$12,495
19'-10"	16'	$9,484	$10,246	20'-0"	$11,369	$12,131	$12,893
21'-10"	18'	$9,688	$10,498	22'-0"	$11,669	$12,481	$13,291
23'-10"	20'	$9,892	$10,751	24'-0"	$11,971	$12,830	$13,690
25'-10"	22'	$10,097	$11,005	26'-0"	$12,272	$13,180	$14,088
27'-10"	24'	$10,301	$11,258	28'-0"	$12,574	$13,530	$14,487
29'-10"	26'	$10,505	$11,510	30'-0"	$12,875	$13,879	$14,885
31'-10"	28'	$10,709	$11,763	32'-0"	$13,176	$14,229	$15,284
33'-10"	30'	$10,914	$12,016	34'-0"	$13,478	$14,580	$15,681
35'-10"	32'	$11,118	$12,268	36'-0"	$13,778	$14,930	$16,079
37'-10"	34'	$11,322	$12,521	38'-0"	$14,080	$15,279	$16,478
39'-10"	36'	$11,526	$12,774	40'-0"	$14,381	$15,629	$16,876
41'-10"	38'	$11,730	$13,027	42'-0"	$14,683	$15,978	$17,275
43'-10"	40'	$11,935	$13,279	44'-0"	$14,984	$16,328	$17,673
Per Foot Price		$102.10	$126.50		$151.00	$175.40	$198.70

*Refer to the bottom of the page for conveyor weights.

IMPORTANT NOTES

• OTHER LENGTHS
Other lengths not listed in price chart are available. For "IN-BETWEEN SIZES", use next larger Overall Length "A" price. For lengths longer or shorter than those shown in chart, please contact us for lead time.
• OTHER WIDTHS
For "IN-BETWEEN WIDTHS", use next width plus 10%. For widths over 42" OAW, Contact us for lead time.
• INTERMEDIATE BEDS
Use per foot price of width x required length, supports not included.
• FLOOR SUPPORTS
Floor Supports are not included in base price. There are two (2) stationary floor supports required for the first
bed section and one (1) support required per bed section thereafter.
• NON-STANDARD WIDTHS
Contact us for lead time.


			Order Online, by Phone, or by E-Mail
			~ Add items to your online shopping cart ~ Click a Price of the item you wish to purchase.

PRICES FOR OPTIONAL EQUIPMENT

OPTIONAL BELTS

OPTIONAL DRIVES

Extra Price Per foot Conveyor Length "A" (in addition
to Black Trackmate 120 Roughtop with PVC Cover
regularly finished). See chart Below.

Unified Drives: (Shaft Mounted)

Unified Drives:	16" to 28"	30" to 42"
Center Drive 8" Drive Pulley w/075 Reducer	$270.95	$270.95
Center Drive 8" Drive Pulley w/090 Reducer	$459.65	$459.65

BELT DESCRIPTION
Prices Per Foot of Conveyor Length "A"
BELT WIDTH	Brown Polymate Roughtop	Pure Gum Rubber Roughtop (Tan)
10"	$25.10	$55.60
12"	$29.60	$67.00
14"	$34.50	$78.40
16"	$40.00	$89.50
18"	$44.70	$100.70
20"	$49.70	$112.20
22"	$54.80	$122.80
24"	$60.10	$134.40
28"	$70.20	$156.60
30"	$74.90	$167.90
34"	$79.50	$179.20
36"	$89.60	$201.70

8” Drive Pulley

Speed FPM	65	78	97	130	156	195	260	389
Max HP	1	1,2*	1	2	2	2	2	2**

* Reducer size increases with 2 HP.
**Contact Factory.

Drive Type	OVERALL FRAME WIDTH
Drive Type	16" to 28"	30" to 42"
Center Drive (V-Belt)	$246.50	$246.50
Low Elevation Side Mounted Center (C-Face)	$382.10	$497.90
Low Elevation Side Mounted Center (V-Belt)	$628.40	$742.60
Center Drive with Extended Take-Up C-Face	$194.60	$291.70
Center Drive with Extended Take-Up V-Belt	$440.70	$538.00
High Performance Center Drive (C-Face)	$671.80	$866.50
Heavy Duty Center Drive (C-Face)	$368.50	$394.40

GUARD RAILS

Adjustable Universal Channel Type Guard Rail

Both Side..................per foot...................
One Side...................per foot..................

$15.10
$7.80

#50 O-Ring Drive Chain ............Add ........

$284.40

Overlapping Fixed Channel Type (One Direction)

#60 O-Ring Drive Chain ............Add ........

$406.00

Prices are for Both Sides
3-1/2" x 1-1/2" x 12 Ga....per foot............
6-1/2" x 1-1/2" x 12 Ga....per foot............
10" x 1-1/2" x 12 Ga.........per foot...........
13" x 1-1/2" x 12 Ga.........per foot...........

#50 O-Ring Chain on Feeder Slave Connection

$25.60

.................................................Add .........

$203.50

$32.60
$43.20
$51.50

#60 O-Ring Chain on Feeder Slave Connection

.................................................Add .........

$406.00

Non-Overlapping Fixed Channel Type
(Bi-Directional)

CONSTANT AND VARIABLE SPEEDS

Constant C-Face--Within 17-135 FPM...

No Charge

Constant V-Belt--Minimum of 7 FPM with a 1 HP

$22.50

motor requires 5A Reducer and V-Belt Drive .......

$27.10
$38.30
$46.10

..............................................Add On ...

$596.20

Constant Speeds Below Those Listed Above .........

............................................................. Contact us

UNDERTRUSSING (MAX. 30" OAW)

DRIVE COMPONENT DEDUCTS

See drawing below to select the undertrussing
you want.

Less Motor Drive, Motor Mount and Guards,

but with Shaft Extension...Deduct.............

$1,002.80

Undertrussing Kit Assembly (A) .....Ea.....

$287.05

Less Brake Motor (1 HP-208/230/
460/575V-3Ph.-60 Hz.)............Deduct......

Undertrussing Kit Assembly (B) .....Ea.....

$287.05

$541.10

Undertrussing Kit Assembly (C) .....Ea.....

$287.05

*Less Reducer......Deduct.........................

$307.40

NOTE: Specify quantity each.

*Less V-Belt Guard, Chain Guard, sheaves and
sprockets when V-Belt drive is supplied. Less chain
guard and sprockets when C-Face drive is supplied.

NOTE: Undertrussing not recommended for units
over 40’ bed length, floor supports required.

LARGER TAIL PULLEY

GALVANIZING

6" dia. Tail Pulley in place of 4" dia. when not furnished

as standard.............................................

$360.10

ELECTRICAL CONTROLS

(See bottom of page)


			Order Online, by Phone, or by E-Mail
			~ Add items to your online shopping cart ~ Click a Price of the item you wish to purchase.

MOTORS

Extra Motor Price for OTHER THAN: 1 HP–208/230/460/575 V–3 Ph.–60 Hz.–Totally Enclosed. Speed affects horsepower requirements.

H.P. REQ.	SSB Short Series	"D" Series	High Cycle Chain Driven	High Cycle Chain Driven	High Cycle Timing Belt Driven
H.P. REQ.	208/230/460/575V 3 Ph.-60 Hz.	115/230V 1 Ph.-60 Hz.	208/230/460V 3 Ph.-60 Hz.	575V 3 Ph.-60 Hz.	208/230/460/575V 3 Ph.-60 Hz.
1	N/C	$167.90	$972.50	$972.50	$2,789.50
2	$588.90	$2,104.00	$1,370.40	$1,370.40	$3,073.80

FLOOR SUPPORTS

VARIABLE SPEED BRAKE MOTOR DRIVES

Not Included in Base Price. Use Chart Below for
Required Elevation.

(SPROCKET DRIVEN)

AC VARIABLE SPEED DRIVES (ALL
MOTORS ARE ENERGY EFFICIENT 3 PHASE)

"MS" SUPPORT

Model No.	Adjustment to Top of Belt	Price Each
MSL-1	9-1/16" to 10-1/16"	$58.40
MSL-2	10-1/16" to 11-13/16"	$58.40
MSL-3	11-13/16" to 14-7/16"	$58.40
MS-1	14-1/16" to 15-13/16	$58.40
MS-1.2	15-1/16" to 16-13/16"	$58.40
MS-1.4	16-1/16" to 17-13/16"	$58.40
MS-2	17-1/16" to 20-1/16"	$60.40
MS-3	19-11/16" to 22-11/16"	$66.40
MS-4	22-11/16" to 28-11/16"	$76.40
MS-5	26-11/16" to 32-11/16"	$79.80
MS-6	30-11/16" to 42-11/16"	$88.10
MS-7	40-11/16" to 52-11/16"	$130.20
MS-8	52-11/16" to 64-11/16"	$148.50
MS-9	64-11/16" to 76-11/16"	$162.80
MS-10	76-11/16" to 88-11/16"	$185.60
MS-11	86-11/16" to 98-11/16"	$205.20
MS-12	98-11/16" to 110-11/16"	$215.20

SINGLE PHASE CONTROLLER INPUT
H.P.	ADD ON PRICE 115 VOLT	ADD ON PRICE 208 VOLT	ADD ON PRICE 230 VOLT
1	VSC-11	VSC-13	VSC-13
1	$3,050	$2,732	$2,732
2	N/A	VSC-14	VSC-14
2	N/A	$3,373	$3,469
THREE PHASE CONTROLLER INPUT
H.P.	ADD ON PRICE 208 VOLT	ADD ON PRICE 230 VOLT	ADD ON PRICE 460 VOLT
1	VSC-16	VSC-16	VSC-19
1	$2,916	$2,815	$3,205
2	VSC-17	VSC-17	VSC-20
2	$3,554	$3,651	$3,737

VARIABLE SPEED BRAKE MOTOR DRIVES

(TIMING BELT DRIVEN)

AC VARIABLE SPEED DRIVES (ALL
MOTORS ARE ENERGY EFFICIENT 3 PHASE)

Knee Braces ...........Add On Per Pair .............................

$30.00

SINGLE PHASE CONTROLLER INPUT
H.P.	ADD ON PRICE 115 VOLT	ADD ON PRICE 208 VOLT	ADD ON PRICE 230 VOLT
1	VSC-11	VSC-13	VSC-13
1	$4,891	$4,636	$4,636
2	N/A	VSC-14	VSC-14
2	N/A	$5,240	$5,435
THREE PHASE CONTROLLER INPUT
H.P.	ADD ON PRICE 208 VOLT	ADD ON PRICE 230 VOLT	ADD ON PRICE 460 VOLT
1	VSC-16	VSC-16	VSC-19
1	$4,891	$4,636	$4,636
2	VSC-17	VSC-17	VSC-20
2	$5,435	$5,632	$5,632

Note: MS-3 to MS-12: Knee Braces included in price.

CEILING HANGERS

Ceiling Hanger Brackets with (2) 5/8” dia. x

8’-0” long unplated fully threaded rods.....

$147.90

Ceiling Hanger Brackets with (2) 5/8” dia. x
8’-0” long galvanized fully threaded rods....

$176.60

Mount and Wire Controller..............................

Ceiling Hanger Brackets with (2) 5/8” dia.
x 10’-0” long unplated fully threaded rods.....

...............................Add-on..........................

$297.81

$218.40

NOTE #1: All above V/S Drive Kits include NEMA
1 / IP30 Junction Box, Controller, EA-068A Brake
Control Kit and Brake Motor, and either #60 Chain
with Taper Lock Sprockets OR Timing Belt,
Sprockets and Belt.
NOTE #2: Good for cycle rates of up to 15 cycles
per minute, at 1/2 second ramp time, with a maximum
speed of 250 FPM.

Ceiling Hanger Brackets with (2) 5/8” dia.
x 10’-0” long galvanized fully threaded rods....

$359.60

Ceiling Hanger Brackets with (2) 5/8” dia.
x 12’-0” long unplated fully threaded rods.....

$362.60

Ceiling Hanger Brackets with (2) 5/8” dia.
x 12’-0” long galvanized fully threaded rods....

$419.40

Ceiling Hanger Brackets, Less Rods Only...

$93.10

Extra Length Rods:

(2) 8’-0” long x 5/8” dia. unplated fully
threaded rods .........................................

$54.20

(2) 8’-0” long x 5/8” dia. galvanized fully
threaded rods .......................................

$83.40

(2) 10’-0” long x 5/8” dia. unplated fully
threaded rods ......................................

$125.20

(2) 10’-0” long x 5/8” dia. galvanized fully
threaded rods .....................................

$266.30

(2) 12’-0” long x 5/8” dia. unplated fully
threaded rods.....................................

$269.60

(2) 12’-0” long x 5/8” dia. galvanized fully
threaded rods ...................................

$326.50

Hex Coupling Nuts for Rods ..................

$4.90


				Order Online, by Phone, or by E-Mail
				~ Add items to your online shopping cart ~ Click a Price of the item you wish to purchase.

POWER FEEDER (DEDUCTS)

Ultimate 140 BBS

NOTE: Overall length of 35-1/2” requires one support. Overall length of 50-1/2” or more requires two supports.
Supports not included in base price.

Belt Widths

Chain Driven Feeder

10"

12"

14"

16"

18"

20"

22"

24"

28"

30"

34"

36"

Min. Length Overall

35-1/2"

50-1/2"

67-1/2"

79-1/2"

79-1/12"

91-1/2"

Price Per Foot

$108.10

$109.00

$125.00

$132.60

$143.50

$151.80

$160.10

$167.90

$183.90

$191.10

$214.10

$224.60

*Less Feeder Deduct

-$1,442

-$1,518

-$1,759

-$1,840

-$1,920

-$2,000

-$2,291

-$2,549

-$2,817

-$3,106

-$3,340

-$3,748

*Will be supplied with rounded end in lieu of feeder.


			Order Online, by Phone, or by E-Mail
			~ Add items to your online shopping cart ~ Click a Price of the item you wish to purchase.

ELECTRICAL CONTROLS AND DRIVE SECTION

MANUAL START SWITCH or
SAFETY DISCONNECT

LIMIT SWITCH, SINGLE POLE,
WITH NYLON ROLLER LEVER

#032.1014.........................................

$213.01

#033.2032 & #033.2072..................$555.67
Nema 4

"START-STOP", Nema 1, One direction, 30
AMP, 3 Pole (Single or 3 phase)

LIMIT SWITCH, DOUBLE POLE,
WITH NYLON ROLLER LEVER

#033.2033& #033.2072...................$332.11
Nema 4

REVERSING DRUM SWITCH

#032.103..........................................

$854.26

"Fwd-Stop-Rev", Nema 1, for 1-1/2 HP at
115 volts or 2 HP at 230 volts single phase,
or 2 HP max. three phase

PROXIMITY SWITCH, INDUCTIVE,
(METAL SENSING)

#032.210.........................................$205.35
115 Volt AC, two wire with ground, 30mm dia.,
10mm range

FOOT SWITCH WITH GUARD

#032.211.........................................$243.09
24 Volt DC, two wire with ground, 30mm dia.,
10mm range

#032.200........................................... $270.29
(Constant Pressure) "On-Off" type, Nema 1,
Pilot Control or 1 HP max. single phase.

PHOTO EYE, ON-OFF TYPE

#EA-000005......................................$1,059.27
Banner Q45 Retro Reflective Photo Eye Kit
with timing module, reflector and mounting
brackets. Photo Eye output is one form C
type relay, Operating voltage
24-250VAC/12-250VDC

POWER CORD AND PLUG (20')

POWER CORD WITH PLUG ONLY 20' LONG
Model No.	Voltage	HP Rating	Prices
EA-039-1A	115/1	1/2-3/4	$106.67
EA-039-2A	115/1	1	$106.67
EA-039-3A	115/1	1 1/2	$155.18
EA-039-4A	230/1	1/2-1	$106.67
EA-039-5A	230/1	1 1/2-2	$109.67
EA-039-6A	208-230/3	1/2-2	$178.60
EA-039-7A	460/3	1/2-2	$178.60

POWER CORD WITH PLUG 20' LONG WITH MANUA
Model No.	Voltage	HP Rating	Prices
EA-039-1B	115/1	1/2-3/4	$173.16
EA-039-2B	115/1	1	$330.67
EA-039-3B	115/1	1 1/2	$377.96
EA-039-4B	230/1	1/2-1	$293.04
EA-039-5B	230/1	1 1/2-2	$330.67
EA-039-6B	208-230/3	1/2-2	$362.97
EA-039-7B	460/3	1/2-2	$362.97

MOUNTING BRACKETS FOR PHOTO
EYE #033.2122

B-05165...........................................$118.10

AIR PRESSURE SWITCH

#094.191........................................$691.31
Nema 4

EMERG. STOP PULL CORD SWITCH

#032.285 with 032.2851 Turnbuckle
...........................................................$696.08
Nema 4

"RED" EMERGENCY PULL CORD
CABLE AND MOUNTING HARDWARE

#032.281...one side.................$7.44 per / ft.
both sides..............$15.87per / ft.

EMERGENCY PUSH BUTTON

#032.284..........................................$279.61
Nema 4

PHOTO EYE, 18MM DIA., DIFFUSED,
(PHOTO PROX.) 115 VOLT, LIGHT
OPERATE, 2-METER CABLE

#032.2113 (100mm range, 3.94")....$1,066.27
#032.2116 (200mm range, 7.87")....$194.14
#033.218 (400mm range, 15.74")....$293.48

NOTE: PRICING LISTED NOT MOUNTED
OR WIRED

"PHOTO EYE, RETRO-REFLECTIVE,
(POLARIZED) 24 VOLT DC

#033.2128 with 032.21122 Cable.....$239.09
#032.21122 (Cable Only)...................$72.37


			Order Online, by Phone, or by E-Mail
			~ Add items to your online shopping cart ~ Click a Price of the item you wish to purchase.

CONTROLLER PRICES

AC VARIABLE SPEED CONTROLLER ONLY
SINGLE PHASE CONTROLLER INPUT
Motor Size	115 Volt		208/230 Volt
1/2	VSC-12-10		VSC-12-12
Price	$1,491.84		$1,189.37
1	VSC-12-11		VSC-12-13
Price	$1,724.27		$1,391.05
2	N/A		VSC-12-14
Price	~		$1,794.20
THREE PHASE CONTROLLER INPUT
Motor Size	208/230 Volt	460 Volt	575 Volt
1/2	VSC-01-15	VSC-01-18	VSC-12-29
Price	$1,564.99	$1,656.34	$2,155.73
1	VSC-01-16	VSC-01-19	VSC-12-29
Price	$1,579.75	$1,794.20	$2,155.73
2	VSC-01-17	VSC01--20	VSC-12-30
Price	$1,978.69	$2,070.37	$2,663.45

REPLACEMENT INVERTER DUTY
ENERGY EFFICIENT MOTORS

HP	Part No.	Price
1/2	032.351 230/460	$618.71
1	032.353 230/460	$705.52
2	032.355 230/460	$797.31
1/2	032.3512 575	$1,449.11
1	032.3532 575	$1,611.17
2	032.3552 575	$1,897.10

IMPORTANT NOTES...

• All above motors are 230 / 460 / 575 Volt, 3 Phase.
• All above V/S Drive Kits include NEMA 1 / IP30
Junction Box, Controller and Motor.
• Good for cycle rates of up to 15 cycles per minute, at
1/2 second ramp time, with a maximum speed of 250
FPM.
• Drawing No. DG-001146.

OPTIONAL: Mounting and Wiring Add-On . . .
(mounted close to the motor)

$675.20

• When AC Variable Speed Controller is used with a
Brake Motor, A Brake Relay Kit (EA-068A) is
required. Add an additional $542.68 for this option.)

Brake Relay Kit (EA-068A)..............................

$542.68

ELECTRONIC CLUTCH BRAKE DRIVE PACKAGE

Part No.	Description	Price
EA-VSC-01-CB	2 HP Electronic Clutch-Brake Kit	$5,058.00

OPTIONAL: Mounting and Wiring Add-on .
(mounted close to the motor)

$675.20

KIT INCLUDES

Part No.	Description
VSC-01-20	AC Variable Speed Controller, 460 Volt, 3 Phase
032.345	2 HP 460 Volt, 3 Phase, C-Face Motor TEBC (Blower Cooled) With 5AC Reducer and #60 Chain and Sprockets

IMPORTANT NOTES

• Good for cycle rates of up to 60 cycles per minute.
• 1/10 second Accel and Decel time, with 350 FPM
Maximum Speed.
• 230 or 460 Volt Only, Other Voltages, Contact us.
• Motor Cooling Blower is 115 Volt, 1 Phase, 60 Hz.
• Price Includes 5AC Reducer and #60 Chain and
Sprockets

Part No.	Description
VSC-01-17	AC Variable Speed Controller, 230 Volt, 3 Phase
032.345	2 HP 230 Volt, 3 Phase, C-Face Motor TEBC (Blower Cooled) With 5AC Reducer and #60 Chain and Sprockets


			Order Online, by Phone, or by E-Mail
			~ Add items to your online shopping cart ~ Click the Model No. of the item you wish to purchase.

THIS STARTER LISTING MEETS TYPE "2"
COORDINATION (Defined)

An International Electrotechnical Commission (IEC) term that means: “under short circuit
conditions, the starter shall cause no danger to persons or installation and shall be
suitable for further use.” The only allowable damage to the starter is light contact burning
or tack welding, provided the contacts are separable. Starters meeting this level of com-
ponent protection provides users with less down time and lower replacement costs.

THREE PHASE, IEC COMBINATION MAGNETIC STARTERS
H.P.	MOTOR DUTY	NON-REVERSING					REVERSING
H.P.	MOTOR DUTY	208 VOLT	230 VOLT	460 VOLT	575 VOLT	PRICE	208 VOLT	230 VOLT	460 VOLT	575 VOLT	PRICE
1/2	STANDARD EASY CLEAN ENERG. EFF.	EN-20B40	EN-23B25	EN-46B16	EN-57B10	$1516.60	ER-20B40	ER-23B25	ER-46B16	ER-57B10	$2,023.30
			EN-23B25	EN-46B16				ER-23B25	ER-46B16
			EN-23B16	EN-46B10				ER-23B16	ER-46B10
1	STANDARD EASY CLEAN ENERG. EFF.	EN-20B40	EN-23B40	EN-46B25	EN-57B16		ER-20B40	ER-23B40	ER-46B25	ER-57B16
			EN-23B40	EN-46B16				ER-23B40	ER-46B16
			EN-23B40	EN-46B16				ER-23B40	ER-46B16
1-1/2	GEARMOTORS	EN-20C10	EN-23B63	EN-46B40	EN-57B25		ER-20C10	ER-23B63	ER-46B40	ER-57B25
			EN-23B63	EN-46B25				ER-23B63	ER-46B25
			EN-23B63	EN-46B25				ER-23B63	ER-46B25
2	STANDARD EASY CLEAN ENERG. EFF.	EN-20C10	EN-23C10	EN-46B40	EN-57B40		ER-20C10	ER-23C10	ER-46B40	ER-57B40
			EN-23C10	EN-46B40				ER-23C10	ER-46B40
			EN-23B63	EN-46B40				ER-23B63	ER-46B40

SINGLE PHASE, IEC COMBINATION MAGNETIC STARTERS
H.P.	NON-REVERSING		REVERSING		NON-REVERSING		REVERSING
	115 VOLT	PRICE	115 VOLT	PRICE	230 VOLT	PRICE	230 VOLT	PRICE
1/2	EN-1SC10	$1,182.40	ER-1SC10	$2,023.30	EN-2SB63	$1,435.60	ER-2SB63	$2,023.30
1	EN-1SC16		ER-1SC16		EN-2SC10		ER-2SC10
1-1/2	EN-1SC20		ER-1SC20		EN-2SC10		ER-2SC10
2	EN-1SC20		ER-1SC20		EN-2SC10		ER-2SC10


• Manual Start-Stop Switch Kit			• Start-Stop Push Button Kit, Remote Mounted
	EA-000001 ......................................	$242.09		EA-000002.......................................	$242.09
	Includes: 032.1014 Manual Start Switch, Nema 1, B-21467 Mounting Bracket with Mounting Hardware			Includes: 033.1955 Push Button Station, One Direction, Nema1, B-21467 Mounting Bracket with Mounting Hardware

• Forward-Reverse-Stop Push Button Kit, Remote Mounted

			• Up-Down-Stop Push Button Kit, Remote Mounted
	EA-000003.......................................	$440.67	• Up-Down-Stop Push Button Kit, Remote Mounted
	Includes: 033.1965 Push Button Station, Reversing, Nema1, B-21467 Mounting Bracket with Mounting Hardware			EA-000004.......................................	$440.67
				Includes: 033.1975 Up Down Stop Push Button Station, Reversing, Nema 1, B-21467 Mounting Bracket with Mounting Hardware


			Order Online, by Phone, or by E-Mail
			~ Add items to your online shopping cart ~ Click a Price of the item you wish to purchase.


• “Start-Stop” Push-button Station				• “Start-Stop”Push-button Station
033.1955			$211.23		033.195.................................................	$142.50
Remote mounted, Nema 1					To be mounted in Mag Starter Cover

• “Fwd-Rev-Stop” Push-button Station				• “Fwd-Rev-Stop”Push Button Station
033.1965			$397.05		033.196..................................................	$490.95
Remote mounted, Nema 1					To be mounted in Mag Starter Cover

• “Up-Down-Stop” Push-button Station				OPTIONAL STARTER CONTROLS
033.1975			$397.05	OPTIONAL STARTER CONTROLS
033.1975			$397.05	• Auto Restart Control, 3 Phase, Non-Reversing
Remote mounted, Nema 1				• Auto Restart Control, 3 Phase, Non-Reversing
Remote mounted, Nema 1					EA-011 ............................................ Includes: Photo Eye (033.2122), Dual Time Delay Module (033.2172), Combination Magnetic Starter with extra Contactor (033.160), and a Control Circuit Transformer (As Required), & Pushbutton Station (033.195).	$3,210.68
						$3,210.68

IMPORTANT NOTES
• Control Circuit Transformer Included for 115 Volt Control Voltage. • Above starters are in Nema 3, 4 and 12 Enclosures. • The starters included Safety Disconnect, Overload Relay, and Aux. Contacts as required. • IF AN ORDER IS SUPPLIED LESS MOTOR, AND IS SUPPLYING ANY ELECTRICAL CONTROLS, THEN MOTOR HP, VOLTAGE, PHASE, AND FULL LOAD CURRENT MUST BE STATED ON THE ORDER. • PRICING LISTED IS NOT MOUNTED OR WIRED.

				• Auto Restart Control, 1 Phase, Non-Reversing
					EA-012 (115 Volt) ........................... EA-017 (230 Volt) ........................... Includes: Photo Eye (033.2122), Dual Time Delay Module (033.2172), Combination Magnetic Starter with extra Contactor (033.160), Pushbutton Station (033.195), and (230 V. Only) a Control Circuit Transformer (As Required). Note: Above Price does NOT include Photo Eye Mounting Bracket.	$3,253.63
						$3,391.27

• Add on	$192.70	for the above Push Buttons
to be Mounted.
• Add on	$995.10	for the above Starters and
Push Button Stations to be Mounted and Wired. Supply 20'0" of cable for push button only.

				• Mounting Brackets for photo eye
				• Mounting Brackets for photo eye
					#033.2122 B-05165 ..............................................
						$118.10

CONVEYOR WEIGHT TABLE

SIZE TO ORDER Overall Length "A" 4" Dia Pulley	Bed Length "L"	"B" @ 25°	"H" @ 25° Infeed @ 30-1/2" Discharge @ 30-1/2"	Between Rail Width	13"	15"	17"	19"	21"	23"	25"	SIZE TO ORDER Overall Length "A" 6" Dia. Pulley	27"	31"	33"	37"	39"
				Belt Width	10"	12"	14"	16"	18"	20"	22"		24"	28"	30"	34"	36"
				Overall Frame Width	16"	18"	20"	22"	24"	26"	28"		30"	34"	36"	40"	42"
13'-10"	10'	12'-8"	4'-11"	Weights (Lbs.)	886	941	996	1051	1106	1161	1216	14'	1305	1457	1533	1685	1761
15'-10"	12'	14'-7"	5'-8"		914	971	1028	1085	1142	1199	1256	16'	1347	1503	1581	1737	1815
17'-10"	14'	16'-5"	6'-4"		942	1001	1060	1119	1178	1237	1296	18'	1389	1549	1629	1789	1869
19'-10"	16'	18'-3"	7'-2"		970	1031	1092	1153	1214	1275	1336	20'	1431	1595	1677	1841	1923
21'-10"	18'	20'-1"	8'-0"		998	1061	1124	1187	1250	1313	1376	22'	1473	1641	1725	1893	1977
23'-10"	20'	21'-11"	8'-10"		1026	1091	1156	1221	1286	1351	1416	24'	1515	1687	1773	1945	2031
25'-10"	22'	24'-8"	10'-0"		1054	1121	1188	1255	1322	1389	1456	26'	1557	1733	1821	1997	2085
27'-10"	24'	25'-6"	10'-6"		1082	1151	1220	1289	1358	1427	1496	28'	1599	1779	1869	2049	2139
29'-10"	26'	27'-4"	11'-5"		1110	1181	1252	1323	1394	1465	1536	30'	1641	1825	1917	2101	2193
31'-10"	28'	29'-2"	12'-5"		1138	1211	1284	1357	1430	1503	1576	32'	1683	1871	1965	2153	2247
33'-10"	30'	31'-0"	13'-1"		1166	1241	1316	1391	1466	1541	1616	34'	1725	1917	2013	2205	2301
35'-10"	32'	33'-10"	14'-0"		1194	1271	1348	1425	1502	1579	1656	36'	1767	1963	2061	2257	2355
37'-10"	34'	34'-8"	14'-7"		1222	1301	1380	1459	1538	1617	1696	38'	1809	2009	2109	2309	2409
39'-10"	36'	36'-5"	15'-7"		1250	1331	1412	1493	1574	1655	1736	40'	1851	2055	2157	2361	2463
41'-10"	38'	38'-2"	16'-6"		1278	1361	1444	1527	1610	1693	1776	42'	1893	2101	2205	2413	2517
43'-10"	40'	40'-0"	17'-4"		1306	1391	1476	1561	1646	1731	1816	44'	1935	2147	2253	2465	2571

All weights are conveyor weights only. Accessories, crating, etc., are not included.

INCLINE LIFT GUIDE POWERED BELT CONVEYORS

Belt Conveyors, Conveyor, Conveyor Belt, Floor-to-Floor Incline Conveyor, Incline Conveyor, Conveyors, and Roller Bed from your
source for material handling equipment.

Back to Product Category

Home - Order - Search - Quote- Info - About Us - My Account - Shopping Cart

MODEL RBI

FLOOR-TO-FLOOR INCLINE CONVEYOR (ROLLER BED)

Belt Conveyors, Conveyor, Conveyor Belt, Floor-to-Floor Incline Conveyor, Incline Conveyor, Conveyors, and Roller Bed from your source for material handling equipment.

FLOOR-TO-FLOOR INCLINE
CONVEYOR (ROLLER BED)

Belt Conveyors, Conveyor, Conveyor Belt, Floor-to-Floor Incline Conveyor, Incline Conveyor, Conveyors, and Roller Bed from your
source for material handling equipment.