Gilmore-Kramer Company Material Handling Equipment - 1-800-544-3137 - Service - Installation - Custom Fabrication
Home Order Search Quote Info About Us My Account Shopping Cart
    Categories
Back to Product Category

MODEL 138-ACC

HORIZONTAL POWER CONVEYOR
(ACCUMULATING TYPE)

horizontal power conveyor The simplest method ever devised for
accumulating cartons, boxes, etc.
Basic design eliminates complicated
adjustments and allows a minimum
of 2% back pressure.
• 4 Bed Widths
• 2% Minimum Back Pressure
• Finger Tip Snub Roller Adjustment,
   No Tools Needed
• Reversible
• Adjustable LS-Type Floor Supports
   Available

conveyors

STANDARD SPECIFICATIONS
BED - Roller bed with 1-3/8 in. dia. roller x 18 ga.
galvanized tube spaced every 5/16 in. HRS hex shaft
spaced every 1-1/2 in. and 1-3/8 in. dia. pressure
roller x 18 ga. galvanized tube spaced every 3 in.
Mounted in 6-1/2 in. x 12 ga. powder painted
formed steel channel frame bolted together with butt
couplings.
BEARINGS - Sealed, pre-lubricated ball bearings
with eccentric lock collar on flange and pillow block
bearings. Pre-lubricated ball bearings in tread &
pressure rollers.
SPEED REDUCTION - Sealed worm gear C-Face
speed reducer. No. 50 roller chain to drive shaft.
CROSS BRACING - Rods with turnbuckles are
fastened to underside of bed to provide proper
alignment of bed rollers and insure correct product
tracking. Supplied on every other section, 20 ft.
bed lengths and over. Supplied on bed lengths 9 ft.
and over.
MOTOR - 1/2 HP-208/230/460/575V-3 Ph.
60 Hz. Totally Enclosed C-Face.
CONVEYING SPEED - Constant 65 FPM.
CAPACITY - Maximum load per linear foot of
conveyor 50 lbs. NOT TO EXCEED capacity in
chart.
DRIVE - Mounted underneath, placed near center
of conveyor.
FLOOR SUPPORTS - Now supplied as optional
equipment.
DRIVE BELT - Endless B-section aramid core
V-Belt drives each section of conveyor.
RETURN TAKE-UP SHEAVE - 3-1/4 in. dia. x
1/2 in. bore flat idler has seven position adjustment to
maintain proper V-belt tension.
HOW IT WORKS!

The driving of the tread rollers on the minimum pressure conveyor is accomplished with the top surface of a standard
section endless V-belt. The strength and wear qualities of the tread rollers and this belt have been thoroughly tested
for continuous duty.

To maintain the driving of the tread roller, the pressure roller is mounted in spring adjusted carriers (See Photo below)
which sense the required driving friction regardless of the length of accumulated load. This pressure can be maintained
constantly to give a 2% minimum back pressure in either a forward or reverse direction.
In the event of extreme changes in unit load (weight of box or package), convenient knurled thumb adjusting nuts can
be turned to accept this heavier load.
This method eliminates the need for selecting proper tension spring holes in trigger mechanisms or jogging cleats on
driving belt and eccentric (off center) tread rollers.
By maintaining a constant minimum pressure on the tread rollers, long loads may be conveyed, accumulated or stopped
on the conveyor at any point using very little motor horsepower and giving practically no pressure between boxes or
packages.
conveyor with floor supports
LOAD CAPACITY CHART @ 65 FPM
HP
OVERALL FRAME WIDTH 12" TO 24"
TOTAL LOAD (LBS.)
UP TO 100'
1/2
1000
1
1500
OPTIONAL EQUIPMENT
FLOOR SUPPORTS–LS Type floor supports are
available with a wide range of adjustment. Specify top
of belt or roller elevation. One support required at
every bed joint and ends of conveyor. Holes in feet
for lagging to floor. Knee braces recommended
above LS-6 support.
PACKAGE STOPS - Roller or pin type stops
available, contact us.
ROLLER CENTERS - Tread rollers spaced every
1-1/2 in.
GUARD RAILS - Adjustable Universal Channel
Guard Rail, fixed channel or type A & B angle.
NOTE: If product comes in contact with guard
rails, product flow will be affected.
Fixed channel
overlapping, one direction. Fixed channel nonover-
lapping, reversing.
CONVEYING SPEED - Other constant and variable
speeds from 25 to 120 FPM. NOTE: Capacity and
accumulation feature affected with speed change.
SIDE MOUNTED CENTER DRIVE - Motor
reducer unit mounted to side of conveyor. Minimum
elevation with standard sheave retainer 10 in. With
low elevation sheave retainer 8 in. 9-3/8 in. elevation
at drive, 9-7/8 in. elevation with standard sheave return.
8 in. elevation with low elevation sheave return
(intermediate only).
POLY-TIER SUPPORTS - 36 in. to 120 in. support
heights in 6 in. increments. Knee braces supplied.
CEILING HANGER - 5/8 in. dia. x 8 ft. long un-
plated rods fully threaded. Other lengths and galvanized
rods available.
MOTORS - Energy efficient, single phase, other
characteristics. 3/4 HP maximum.
V-BELT DRIVE - V-Belt supplied between motor
and reducer. Minimum overall drive width 14 in.
ELECTRICAL CONTROLS - Non-reversing or
reversible magnetic starters and push-button stations.
AC variable fequency drive.
O-RING DRIVE CHAIN–With sealed in lubricant
(Recommended for applications that do not permit
regular lubrication).

Order Online, by Phone, or by E-Mail

~ Add items to your online shopping cart ~
Click a Price of the item you wish to purchase.


PRICES FOR COMPLETE CONVEYOR INCLUDE:
* 1-3/8" Dia. x 18 Ga. Galvanized Roller (rollers on 3"
   Centers) in a 6-1/2" x 12 Ga. Channel frame.
* Driving V-Belt
* "C" Face Speed Reducer - Sealed Worm Gear
* 1/2 HP - "C" Face Totally Enclosed Motor
   (Specify Exact Voltage)
* Totally Enclosed Chain Guard
* 65 FPM Constant Conveying Speed
* End Guards
* Less Electrical Controls
* Less Floor Supports
SIZE TO ORDER Overall Length
"A"
Between Rail Widths
10"
13"
16"
22"
Overall Frame Widths
12" 15" 18" 24"
5'
10'
15'
20'
25'
30'
35'
40'
45'
50'
55'
60'
65'
70'
75'
80'
85'
90'
95'
100'
conveyor length
Conveyor sections are easily coupled together at either
end to make up to 100 ft. long units. Drive is usually
located at center of conveyor length.
*Refer to the bottom of the page for conveyor weights.

IMPORTANT NOTES
• BED LENGTHS
   Intermediate bed sections are available in multiples of 4', 5', 6', 7-1/2', 8', and 10' lengths only.
• OTHER LENGTHS
   Other lengths not listed in price chart are available. For "IN-BETWEEN SIZES", use next larger Overall
   Length "A"  price. SEE BED LENGHTS BELOW.
• STANDARD WIDTHS
   All standard widths to be offered in 1 FOOT length increments beginning at 10’ OAL.

• OTHER WIDTHS
   For “IN-BETWEEN WIDTHS”, use next width plus 10%. For widths up to 30” OAW, interpolate plus 10%.
   • NON-STANDARD WIDTHS
   Contact us for lead time.

INTERMEDIATE BEDS
   Use per foot price of width x required length, supports not included.
• DRIVE LOCATION
   Drive is mounted in approximate center of conveyor length on multiple bed lengths only.
• MAXIMUM LENGTH
   Maximum Overall Length "A" is 100' with one (1) Drive.
• FLOOR SUPPORTS
   Floor supports are not included in base price. There are two (2) stationary floor supports required for the
   first bed section and one (1) support required per bed section thereafter.


Order Online, by Phone, or by E-Mail

~ Add items to your online shopping cart ~
Click a Price of the item you wish to purchase.


PRICES FOR OPTIONAL EQUIPMENT
OPTIONAL DRIVE CONSTANT AND VARIABLE SPEEDS
DRIVE
TYPE
OVERALL FRAME WIDTH
12" TO 24"
Underside Drive (V-Belt)
Side Mounted (C-Face)*
Constant - C-Face Within 25 - 90 FPM... No Charge
Variable Speed....See Electrical Controls and Drive
Section Below.
NOTE:  Speeds other than 65 FPM will drastically
affect accumulation feature.
* 9-1/2" minimum elevation
DRIVE COMPONENT DEDUCTS
#50 O-Ring Drive Chain ........ Add ........ $284.40
Less Motor Drive, Motor Mount and Guards, but with
#60 O-Ring Drive Chain ........ Add ........ $386.70
Shaft Extension..............Deduct............. $694.20
FLOOR SUPPORTS
Less Motor Only (1/2 HP-208/230/460/575V-
Not included in base price. Use chart below for required
elevation.
3 Ph.-60 Hz).............Deduct......................
*Less Reducer..........Deduct......................
$258.30
$307.40
*Less V-Belt Guard, Chain Guard, sheaves and
sprockets when V-Belt drive is supplied. Less chain
guard and sprockets when C-Face drive is supplied.
"LS" SUPPORT
Model No. Adjustment to Top of Roller Price Each
LSL-1* 8-3/4" to 9-3/4"
LSL-2* 9-3/4" to 11-1/2"
LSL-3* 11-1/2" to 14-1/8"
LS-1* 14-1/16" to 15-13/16"
LS-1.2* 15-1/16" to 16-13/16"
LS-1.4* 16-1/16" to 17-13/16"
LS-2* 17-1/16" to 20-1/16"
LS-3 19-11/16" to 22-11/16"
LS-4 22-11/16" to 28-11/16"
LS-5 26-11/16" to 32-11/16"
LS-6 30-11/16" to 42-11/16"
LS-7 40-11/16" to 52-11/16"
LS-8 52-11/16" to 64-11/16"
LS-9 64-11/16" to 76-11/16"
LS-10 76-11/16" to 88-11/16"
LS-11 86-11/16" to 98-11/16"
LS-12 98-11/16" to 110-11/16"
SLAVE CONNECTION KIT
For Slave Driving existing curves............... $226.20
(Please Provide Sketch)
GUARD RAILS
NOTE: Available in 5' and 10' lengths only from
Stockyard. Contact us for other lengths.
Adjustable Universal Channel Guard Rail
Both Sides...........per foot......................
One Side..............per foot.....................
$15.10
$7.80
Angle Type
Types "A" or "B" available (specify)
Prices are for both sides
Type "A"
1" x 1" x 12 Ga...............per foot...........
$7.80
Type "B" (See Note)
1" x 1" x 12 Ga.............. per foot...........
$9.20
Fixed Channel Type
(Prices are for both sides.)
2-1/2" x 1" x 12 Ga........ per foot...........
*Less than 18" top of roller elevation-   Side Mounted
Drive Required.
$15.00
*NOTE: If product comes in contact with guard rails,
product flow will be affected.
NOTE: LS-7 to LS-12: Knee Braces included in price.
Extra Knee Braces........... per pair............... $30.00
REPLACEMENT BEDS
LOW ELEVATION
Intermediate Beds - When ordering replacement
intermediate bed sections, use per foot price of
appropriate bed width shown in price chart.
Tail Bed - When ordering replacement tail bed
sections, add an additional................................$538.90
Low Elevation Sheave Retainer Bracket to provide
9-1/2" elevation.
(Side mounted drive required. See Optional Drives.)
Add-on per Sheave Retainer Bracket............. $167.60
POSITIVE DRIVE PACKAGE STOPS
(Add-on per foot of conveyor)
1-1/2" roller centers .......................................$88.70
Angle End Stop
1-1/2" x 1-1/2" x12 Ga. Steel
10" to 22" Between Rail Width................
$31.75
ABEC PACKED SEALED BEARINGS
WITH 5/16" HEX SHAFTS
Raised Roller End Stops
2-1/8" Dia. Roller
10" to 22" Between Rail Width................
Per foot add-on
$78.70
Between Rail Width 10" 13" 16" 22"
Overall Frame Width 12" 15" 18" 24"
Add Per Foot of
Conveyor 1-1/2" Ctrs.
Hand Operated Stop
(Blade or Roller Types, specify)
10" to 22" Between Rail Width................
$538.60
Air Operated Linear Thruster Stop
(Pin, Roller or Blade Types, specify)
13" to 22" Between Rail Width................
ELECTRICAL CONTROLS
$1,701.30
See below.
NOTE: Filter Regulator Unit not supplied as standard.
Stops are supplied in NORMALLY DOWN position.
Can be supplied in Normally Up position - Specify.
GALVANIZING
Contact us.

Order Online, by Phone, or by E-Mail

~ Add items to your online shopping cart ~
Click a Price of the item you wish to purchase.


CEILING HANGERS
Ceiling Hanger Brackets with (2) 5/8” dia. x 8’-0” long unplated
fully threaded rods ......................................................................
ceiling hangers for conveyors $147.90
Ceiling Hanger Brackets with (2) 5/8” dia. x 8’-0” long galvanized
fully threaded rods .......................................................................
$176.60
Ceiling Hanger Brackets with (2) 5/8” dia. x 10’-0” long unplated fully
threaded rods................................................................................
$218.40
Ceiling Hanger Brackets with (2) 5/8” dia. x 10’-0” long galvanized fully threaded rods.................................................................................
$359.60
Ceiling Hanger Brackets with (2) 5/8” dia. x 12’-0” long unplated fully threaded rods.................................................................................
$362.60
Ceiling Hanger Brackets with (2) 5/8” dia. x 12’-0” long galvanized fully threaded rods..................................................................................
$419.40
Ceiling Hanger Brackets, Less Rods Only .................................... $93.10
Extra Length Rods:
(2) 8’-0” long x 5/8” dia. unplated fully threaded rods .................. $54.20
(2) 8’-0” long x 5/8” dia. galvanized fully threaded rods ............... $83.40
(2) 10’-0” long x 5/8” dia. unplated fully threaded rods ................ $125.20
(2) 10’-0” long x 5/8” dia. galvanized fully threaded rods ............. $266.30
(2) 12’-0” long x 5/8” dia. unplated fully threaded rods ................ $269.60
(2) 12’-0” long x 5/8” dia. galvanized fully threaded rods ............. $326.50
Hex Coupling Nuts for Rods ......................................................... $4.90
Above noted delivery times determined by delivery time of model ordered.
POLY-TIER SUPPORTS
poly tier supports for conveyors
PRICES FOR COMPLETE
SUPPORT INCLUDE:
IMPORTANT NOTES
• Check for Clearance
• Specify type of conveyor to be used.
• Use in place of LS or MS Supports only.
• Painted Steel Support Legs
• Adjustable Cross pipe Assembly
• Knee Braces (1 set per level of
   conveyor)
• "U" Brackets
• Single Width Conveyor Only
CAPACITY DATA:
1500 lbs..............................................per cross pipe
4500 lbs..............................................per set of legs
(2) TIER POLY-TIER SUPPORTS
36"
42"
48"
54"
60"
66"
72"
78"
84"
90"
96"
102"
108"
114"
120"
(3) TIER POLY-TIER SUPPORTS
36"
42"
48"
54"
60"
66"
72"
78"
84"
90"
96"
102"
108"
114"
120"

Order Online, by Phone, or by E-Mail

~ Add items to your online shopping cart ~
Click a Price of the item you wish to purchase.


MOTORS
Extra Motor Price for OTHER THAN: 1/2 HP–208/230/460/575 V–3 Ph.–60 Hz.–Totally Enclosed. Speed affects
horsepower requirements.
H.P. REQ.
TOTALLY ENCLOSED 
ENERGY EFFICIENT
200/208/230/
460/575V
3 Ph.-60 Hz.
115/230V
1 Ph.-60 Hz.
230/460V
1 Ph.-60 Hz.
575V
3 Ph.-60 Hz.
1/2 N/C
1 N/A
2 N/A

TC-250 TRAFFIC COP
The Traffic Cop controls product flow from one
conveyor onto another. It allows products from one
line of traffic to flow freely, without interference from
another converging line of traffic. This eliminates collision
of products which may cause damage and disrupt
product flow. Specify model, width and degree.
• 7 arm widths, aluminum
• Available in 30°, 45°, 60°, 90° & 180° applications.
   Includes mounting hardware.
* 180° application - 10" minimum required between lines.
traffic cop
Overall Frame Width 12" to 15" 18" to 24"
Price Each

TURNING WHEEL
Turning Wheels are used in converging 30° and 45° spur applications. Also used at 90° (right angle) transfers where
Traffic Cops, Package Stops and other product flow controlling devices are used. Wheel is mounted on adjustable
bracket to insure proper package orientation through transfer. Can be mounted to slider bed or side channels of
powered and gravity conveyors - specify model where applicable.
mounting bracket
turning wheel
B-05568 Turning Wheel Assembly with 6" dia. wheel & mounting
hardware ............................................................................. $123.00

Order Online, by Phone, or by E-Mail

~ Add items to your online shopping cart ~
Click a Price of the item you wish to purchase.


ELECTRICAL CONTROLS AND DRIVE SECTION
MANUAL START SWITCH or
SAFETY DISCONNECT
limit switch LIMIT SWITCH, SINGLE POLE,
WITH NYLON ROLLER LEVER
manual start switch
#032.1014......................................... $213.01 #033.2032 & #033.2072..................$555.67
Nema 4
"START-STOP", Nema 1, One direction, 30
AMP, 3 Pole (Single or 3 phase)
LIMIT SWITCH, DOUBLE POLE,
WITH NYLON ROLLER LEVER
limit switch double pole

#033.2033& #033.2072...................$332.11
Nema 4
REVERSING DRUM SWITCH
#032.103.......................................... $854.26

"Fwd-Stop-Rev", Nema 1, for 1-1/2 HP at
115 volts or 2 HP at 230 volts single phase,
or 2 HP max. three phase
PROXIMITY SWITCH, INDUCTIVE,
(METAL SENSING)

#032.210.........................................$205.35
115 Volt AC, two wire with ground, 30mm dia.,
10mm range


foot swtich with guard FOOT SWITCH WITH GUARD
#032.211.........................................$243.09
24 Volt DC, two wire with ground, 30mm dia.,
10mm range
#032.200........................................... $270.29
(Constant Pressure) "On-Off" type, Nema 1,
Pilot Control or 1 HP max. single phase.


PHOTO EYE, ON-OFF TYPE
power cord and plug #EA-000005......................................$1,059.27
Banner Q45 Retro Reflective Photo Eye Kit
with timing module, reflector and mounting
brackets. Photo Eye output is one form C
type relay, Operating voltage
24-250VAC/12-250VDC
POWER CORD AND PLUG (20')
POWER CORD WITH PLUG ONLY 20' LONG
Model No.
Voltage
HP Rating
Prices
EA-039-1A
115/1
1/2-3/4
EA-039-2A
115/1
1
EA-039-3A
115/1
1 1/2
EA-039-4A
230/1
1/2-1
EA-039-5A
230/1
1 1/2-2
EA-039-6A
208-230/3
1/2-2
EA-039-7A
460/3
1/2-2
POWER CORD WITH PLUG 20' LONG WITH MANUAL START SWITCH AND MOUNTING BRACKET
Model No.
Voltage
HP Rating
Prices
EA-039-1B
115/1
1/2-3/4
EA-039-2B
115/1
1
EA-039-3B
115/1
1 1/2
EA-039-4B
230/1
1/2-1
EA-039-5B
230/1
1 1/2-2
EA-039-6B
208-230/3
1/2-2
EA-039-7B
460/3
1/2-2
MOUNTING BRACKETS FOR PHOTO
EYE #033.2122
B-05165...........................................$118.10

AIR PRESSURE SWITCH
#094.191........................................$691.31
Nema 4

EMERG. STOP PULL CORD SWITCH
#032.285 with 032.2851 Turnbuckle
...........................................................
$696.08
Nema 4
"RED" EMERGENCY PULL CORD
CABLE AND MOUNTING HARDWARE
#032.281...one side.................$7.44 per / ft.
                  both sides..............$15.87per / ft.
EMERGENCY PUSH BUTTON
#032.284..........................................$279.61
Nema 4

PHOTO EYE, 18MM DIA., DIFFUSED,
(PHOTO PROX.) 115 VOLT, LIGHT
OPERATE, 2-METER CABLE
#032.2113 (100mm range, 3.94")....$1,066.27
#032.2116 (200mm range, 7.87")....$194.14
#033.218 (400mm range, 15.74")....$293.48
NOTE: PRICING LISTED NOT MOUNTED
             OR WIRED
"PHOTO EYE, RETRO-REFLECTIVE,
(POLARIZED) 24 VOLT DC
#033.2128 with 032.21122 Cable.....$239.09
#032.21122 (Cable Only)...................$72.37

Order Online, by Phone, or by E-Mail

~ Add items to your online shopping cart ~
Click a Price of the item you wish to purchase.


CONTROLLER PRICES
AC VARIABLE SPEED CONTROLLER ONLY
SINGLE PHASE CONTROLLER INPUT
Motor Size 115 Volt 208/230 Volt
1/2 VSC-12-10 VSC-12-12
Price $1,491.84 $1,189.37
1 VSC-12-11 VSC-12-13
Price $1,724.27
2 N/A
VSC-12-14
Price ~
THREE PHASE CONTROLLER INPUT
Motor Size 208/230 Volt 460 Volt 575 Volt
1/2
VSC-01-15
VSC-01-18
VSC-12-29
Price
1
VSC-01-16
VSC-01-19
VSC-12-29
Price
2
VSC-01-17
VSC01--20
VSC-12-30
Price
REPLACEMENT INVERTER DUTY
ENERGY EFFICIENT MOTORS
HP Part No. Price
1/2 032.351 230/460
1 032.353 230/460
2 032.355 230/460
1/2 032.3512 575
1 032.3532 575
2 032.3552 575
IMPORTANT NOTES...
All above motors are 230 / 460 / 575 Volt, 3 Phase.
All above V/S Drive Kits include NEMA 1 / IP30
  Junction Box, Controller and Motor.
Good for cycle rates of up to 15 cycles per minute, at
  1/2 second ramp time, with a maximum speed of 250
  FPM.
Drawing No. DG-001146.
OPTIONAL: Mounting and Wiring Add-On . . .
(mounted close to the motor)
$675.20
Brake Relay Kit (EA-068A).............................. $542.68 When AC Variable Speed Controller is used with a
   Brake Motor, A Brake Relay Kit (EA-068A) is
   required. Add an additional $542.68 for this option.)

ELECTRONIC CLUTCH BRAKE DRIVE PACKAGE
Part No. Description Price
EA-VSC-01-CB 2 HP Electronic Clutch-Brake Kit $5,058.00
OPTIONAL: Mounting and Wiring Add-on .
(mounted close to the motor)
$675.20
KIT INCLUDES
Part No. Description
VSC-01-20 AC Variable Speed Controller, 460 Volt, 3 Phase
032.345 2 HP 460 Volt, 3 Phase, C-Face Motor TEBC
(Blower Cooled) With 5AC Reducer and #60 Chain
and Sprockets
IMPORTANT NOTES
Good for cycle rates of up to 60 cycles per minute.
1/10 second Accel and Decel time, with 350 FPM
   Maximum Speed.
230 or 460 Volt Only, Other Voltages, Contact us.
Motor Cooling Blower is 115 Volt, 1 Phase, 60 Hz.
Price Includes 5AC Reducer and #60 Chain and
  Sprockets
Part No. Description
VSC-01-17 AC Variable Speed Controller, 230 Volt, 3 Phase
032.345 2 HP 230 Volt, 3 Phase, C-Face Motor TEBC
(Blower Cooled) With 5AC Reducer and #60 Chain
and Sprockets

Order Online, by Phone, or by E-Mail

~ Add items to your online shopping cart ~
Click the Model No. of the item you wish to purchase.


starter
THIS STARTER LISTING MEETS TYPE "2"
COORDINATION (Defined)
An International Electrotechnical Commission (IEC) term that means: “under short circuit
conditions, the starter shall cause no danger to persons or installation and shall be
suitable for further use
.” The only allowable damage to the starter is light contact burning
or tack welding, provided the contacts are separable. Starters meeting this level of com-
ponent protection provides users with less down time and lower replacement costs.
THREE PHASE, IEC COMBINATION MAGNETIC STARTERS
H.P.
MOTOR
DUTY
NON-REVERSING
REVERSING
208 VOLT
230 VOLT
460 VOLT
575 VOLT
PRICE
208 VOLT
230 VOLT
460 VOLT
575 VOLT
PRICE
1/2
STANDARD EASY
CLEAN ENERG. EFF.
$1516.60
$2,023.30
 
 
 
 
 
 
 
 
1
STANDARD EASY CLEAN
ENERG. EFF.
 
 
 
 
 
 
 
 
1-1/2
GEARMOTORS
 
 
 
 
 
 
 
 
2
STANDARD EASY CLEAN
ENERG. EFF.
 
 
 
 
 
 
 
 
SINGLE PHASE, IEC COMBINATION MAGNETIC STARTERS
H.P.
NON-REVERSING
REVERSING
NON-REVERSING
REVERSING
 
115 VOLT
PRICE
115 VOLT
PRICE
230 VOLT
PRICE
230 VOLT
PRICE
1/2
$1,182.40
$2,023.30
$1,435.60
$2,023.30
1
1-1/2
2
• Manual Start-Stop Switch Kit • Start-Stop Push Button Kit, Remote Mounted
EA-000001 ...................................... $242.09 EA-000002....................................... $242.09
Includes: 032.1014 Manual Start Switch, Nema 1,
B-21467 Mounting Bracket with Mounting Hardware
Includes: 033.1955 Push Button Station, One
Direction, Nema1, B-21467 Mounting Bracket
with Mounting Hardware
Forward-Reverse-Stop Push Button Kit,
  Remote Mounted
• Up-Down-Stop Push Button Kit, Remote
   Mounted
EA-000003....................................... $440.67
Includes: 033.1965 Push Button Station, Reversing,
Nema1, B-21467 Mounting Bracket with Mounting
Hardware
EA-000004....................................... $440.67
Includes: 033.1975 Up Down Stop Push Button
Station, Reversing, Nema 1, B-21467 Mounting
Bracket with Mounting Hardware

Order Online, by Phone, or by E-Mail

~ Add items to your online shopping cart ~
Click a Price of the item you wish to purchase.


• “Start-Stop” Push-button Station • “Start-Stop”Push-button Station
033.1955
$211.23 033.195................................................. $142.50
Remote mounted, Nema 1 To be mounted in Mag Starter Cover
• “Fwd-Rev-Stop” Push-button Station • “Fwd-Rev-Stop”Push Button Station
033.1965 $397.05 033.196.................................................. $490.95
Remote mounted, Nema 1 To be mounted in Mag Starter Cover
• “Up-Down-Stop” Push-button Station
OPTIONAL STARTER CONTROLS
033.1975 $397.05
• Auto Restart Control, 3 Phase, Non-Reversing
Remote mounted, Nema 1
EA-011 ............................................
Includes: Photo Eye (033.2122), Dual Time
Delay Module (033.2172), Combination
Magnetic Starter with extra Contactor
(033.160), and a Control Circuit
Transformer (As Required), & Pushbutton
Station (033.195).
$3,210.68
IMPORTANT NOTES
Control Circuit Transformer Included for 115 Volt
  Control Voltage.
Above starters are in Nema 3, 4 and 12 Enclosures.
The starters included Safety Disconnect, Overload
  Relay, and Aux. Contacts as required.
IF AN ORDER IS SUPPLIED LESS MOTOR,
  AND IS SUPPLYING ANY ELECTRICAL
  CONTROLS, THEN MOTOR HP, VOLTAGE,
  PHASE, AND FULL LOAD CURRENT MUST BE
  STATED ON THE ORDER.
PRICING LISTED IS NOT MOUNTED OR WIRED.
• Auto Restart Control, 1 Phase, Non-Reversing
EA-012 (115 Volt) ...........................
EA-017 (230 Volt) ...........................
Includes: Photo Eye (033.2122), Dual
Time Delay Module (033.2172),
Combination Magnetic Starter with extra
Contactor (033.160), Pushbutton Station
(033.195), and (230 V. Only) a Control
Circuit Transformer (As Required).
Note: Above Price does NOT include
Photo Eye Mounting Bracket.
$3,253.63
$3,391.27
Add on $192.70 for the above Push Buttons
  to be Mounted.
Add on $995.10 for the above Starters and
  Push Button Stations to be Mounted and Wired.
  Supply 20'0" of cable for push button only.
• Mounting Brackets for photo eye
#033.2122
B-05165 ..............................................
$118.10

CONVEYOR WEIGHT TABLE
SIZE TO ORDER Overall Length "A" Between Rail Width 10" 13" 16" 22"
Overall Frame Width 12" 15" 18" 24"
5' Weights
(Lbs.)
Weights
Based on
1 1/2" Roller
Centers
214 231 249 284
10' 337 369 402 466
15' 461 507 555 648
20' 584 645 708 830
25' 708 783 861 1012
30' 831 931 1014 1194
35' 955 1059 1167 1376
40' 1078 1197 1320 1558
45' 1202 1335 1473 1740
50' 1325 1473 1626 1922
55' 1449 1611 1779 2104
60' 1572 1749 1932 2286
65' 1696 1887 2085 2468
70' 1819 2025 2238 2650
75' 1943 2163 2391 2832
80' 2066 2301 2544 3014
85' 2190 2439 2697 3196
90' 2313 2577 2850 3378
95' 2437 2715 3003 3560
100' 2560 2863 3156 3742
All weights are conveyor weights only. Accessories, crating, etc., are not included.
Accessories, crating, etc., are not included.
NOTE:
 Intermediate bed sections are available in multiples of 4 ft., 5 ft., 6 ft., 7 1/2 ft., 8 ft., and 10 ft. lengths only.

Accumulating Conveyor, Conveyor, Live Roller Conveyors, Powered Live Roller, Power Conveyor, Conveyors,
and Roller Conveyors from your source for material handling equipment.

Back to Product Category
Home - Order - Search - Quote- Info - About Us - My Account - Shopping Cart