Gilmore-Kramer Company Material Handling Equipment - 1-800-544-3137 - Service - Installation - Custom Fabrication
Home Order Search Quote Info About Us My Account Shopping Cart
    Categories
Return to All Kee Klamp Products

KWIK KIT™ SAFETY RAILING KITS

Create A Sturdy Railing With A Safety Yellow Advantage
kwik kit safety railing kits
Kwik Kit Safety Railing Kits Offer Prepackaged Convenience
Everything you need for the Kwik Kit assembly is included in one box.
Railing Uprights are pre-assembled to save you even more time and
eliminate parts guesswork.
A Sturdy Yet Flexible Railing Package
Kwik Kit safety railing kits allow you to create a sturdy railing system
with no welding and the added advantage of safety yellow rails. These
railing kits are quick to assemble using a hex key to tighten the large, easy
to use set screws. Kwik Kit safety railing kits are prepackaged with 6-foot
post spacing for straight sections, corner sections or extension sections. By
using a combination of Straight, Corner, or Extension Kits, almost any
basic railing requirement can be fulfilled. The rails may be cut where
shorter sections are required. The kits may be secured using bolts or
chemical anchors attached to the base fittings.
Pre-assembled Uprights Save Even More Time
With preassembled uprights, assembly
is intuitive. Elbows, crosses, and tees
are already pre-fitted to the uprights.
Assembly is intuitive. Just place your horizontal rails into the pre-
positioned upright fittings and tighten the set screws. A convenient hex
key set is provided with your kit to assist during the installation process.
You can then determine your railing placement and choose your
own method of anchoring the railing assembly. Once the railing
assembly is anchored, make any final adjustments needed. Upon
final inspection of the railing, it is recommended that all of the
fitting set screws be tightened to a torque 29 lbs/ft.
kwik kit safety railing kits
Kwik Kit™ Safety Railing Kit Benefits:
• Strong and safe: they exceed OSHA and BOCA standards
• Attractive safety yellow powder coated pipe
• Easy to assemble using only a Hex Key
• Available in Aluminum or galvanized Iron/Steel
• 6-foot post spacing means lower system cost per foot
• Standard Pipe Size: 1.90" OD
Toeboard and Ground Socket
kwik kit safety railing kits
Toeboard and Ground Socket Options Available
Type 69 meets OSHA requirements for toeboards. Stainless steel
hardware included. Easy to install with no drilling or welding.
Type 66 is a ground socket fitting designed for concrete
installations when uprights are required to be removable. It
incorporates a socket set screw fixing on top of the flange and can
be supplied with a plug to fill the hole when the pipe is removed.

Kwik Kit Railing Kit Installation Instructions
kwik kit safety railing kits
To Install:
1. Insert the 39-3/4” (1010mm) upright cuts
   into the base 62-8 fittings.
2. Insert the yellow 69” (1.75m) tubing into
   the 15-8, 10-8, 25-8, and 26-8 fittings
3. Tighten set screws on the fittings to
   29 ft/lbs with a standard hex tool
4. Kits are secured using bolts or chemical
   anchors
Model No. KWIK SS/AS (Steel/Aluminum)
Kit Includes:
• (3) prebuilt uprights including following:
   - (2) end uprights each containing (1) 15-8, (1) 10-8, (1) Rail
   - (1) intermediate upright containing (1)25-8, (1) 26-8, (1) Rail
• (3) 62-8 Bases
• (4) Rails - 69” (1.75m) Tubing

kwik kit safety railing kits kwik kit safety railing kits
Model No. KWIK SC/AC (Steel/Aluminum)
Kit Includes:
• (3) prebuilt uprights including following:
   - (2) end uprights each containing (1) 15-8,
   (1) 10-8, (1) Rails
   - (1) corner upright containing (1) 20-8,
   (1) 21-8, (1) Rail
• (3) 62-8 Bases
• (4) Rails - 69” (1.75m) Tubing
Model No. KWIK SE/AE (Steel/Aluminum)
Kit Includes:
• (1) prebuilt uprights including following:
   - (1) upright containing: (1) 25-8, (1) 26-8,
   (1) Rail
• (1) 62-8 Bases
• (2) Rails - 69” (1.75m) Tubing
To Install:
1. The 39-3/4” (1010mm) upright cuts insert into
   the base 62-8 fittings.
2. Insert the yellow 69” (1.75m) tubing into the
   15-8, 10-8, 20-8, and 21-8 fittings
3. Tighten set screws on the fittings to 29 ft/lbs
   with a standard hex tool
4 Kits are secured using bolts or chemical anchors
To Install:
1. The 39-3/4” (1010mm) upright cuts insert into
   the base 62-8 fittings.
2. Insert the yellow 69” (1.75m) tubing into the
   25-8, and 26-8 fittings
3. Tighten set screws on the fittings to 29 ft/lbs
   with a standard hex tool
4. Kits are secured using bolts or chemical anchors

Order Online, by Phone or by E-Mail

~ Add items to your online shopping cart ~
Click the Model No. of the item you wish to purchase.


Kwik Kit ™ Safety Railing Kit Prices
Model No.
Description
Shipping Weight
Price
Steel
Corner Kit
96 lbs
$1,012.42
Straight Kit
96 lbs
$1,012.42
Extension Kit
43 lbs
$437.82
Aluminum
Corner Kit
50 lbs
$1,434.92
Straight Kit
50 lbs
$1,434.92
Extension Kit
25 lbs
$621.06
Kee Klamp, Kee Klamps, Pipe Hand Rail, Pipe Handrail, Pipe Rail, Pipe Rail Fittings, Pipe Railings, Pipe Rails, Railing Pipe, Slip
on Pipe Fittings, Steel Pipe Railing, Railing Kits, and Kwik Kit from your complete source for material handling equipment.

Return to All Kee Klamp Products
Home - Order - Search - Quote- Info - About Us - My Account - Shopping Cart