Back to Product Category
MONORAILS
- ENCLOSED TRACK DESIGN
|
|
|
|
|
|
![monorail enclosed track design](images/dcp_0435.jpg) |
|
|
|
|
|
|
![monorails enclosed track design](images/running_flange.jpg) |
|
|
|
|
|
|
The
2° taper of the running flange
helps to center the trolley in the
track for smooth, effortless
movement of trolleys. |
|
|
|
|
|
|
|
|
|
ENCLOSED
TRACK DESIGN MAKES FOR EASY MOVEMENT AND LONG LIFE |
|
|
|
|
|
Both
the aluminum and steel monorail systems utilize enclosed track that is high
in strength and low in weight.
Major advantages: |
|
|
|
|
|
Enclosed track monorails are easier to move that traditional structural
designs. |
|
|
|
|
|
The design virtually eliminates dirt and dust from the rolling surface,
thus reducing wear on the wheels of the
trolley. |
|
|
|
|
|
The smooth running surface means lower rolling resistance. |
|
|
|
|
|
The low profile of the steel track allows the system to be installed where
headroom is a problem. |
|
|
|
|
|
The low track weight reduces the applied forces exerted on the supporting
structure. |
|
|
|
|
|
Long spans allow systems to be installed where hanging points are infrequent
(up to 30 feet with the steel truss
design). |
|
|
|
|
|
Four distinct sizes to track -- 250, 500, 1000, and 2000 series -- enable
you to keep weights and costs to a minimum. |
|
|
|
|
|
![trussed steel track](images/trussed_steel_track.jpg) |
|
|
|
![plain steel track](images/plain_steel_track.jpg) |
|
|
|
|
|
|
|
|
|
|
|
|
PLAIN
STEEL TRACK: |
TRUSSED
STEEL TRACK: |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
For
use where frequent support points are available
or where maximum headroom is required. |
Permits
longer spans when frequent support points
are not available. |
|
|
|
|
The
standard hot-rolled steel track profile offers a
low-weight to high-strength ratio. Model numbers start
with GLM for this track. |
The
trussed series uses the plain steel track profile
but is enhanced for longer spans via a built-up truss
design. This design increases the span, which
decreases the need for frequent hangers. Model
numbers start with GLMS (for monorails) for spans
up to 20 feet; GLMSL for spans up to 25 feet, and
GLMSLX for spans up to 30 feet. |
|
|
|
|
|
|
|
|
|
|
|
![aluminum track](images/aluminum_track.jpg) |
|
|
|
|
ALUMINUM
TRACK: |
|
|
|
|
For
use where easier movement is required. |
|
The
patented shape of aluminum enclosed track
provides for low weight, unparalleled spanning
capability, and effortless movement. The low weight
(up to 44% less than trussed steel track) results in
easier movement, which makes for safe, productive, ergonomic work cells.
Model numbers start with
ALM (for monorails). |
|
|
|
|
![monorails enclosed track design isometric view](images/isometric_view_drawing.jpg) |
|
ANATOMY
OF A MONORAIL |
|
|
|
|
|
|
|
1 |
|
HOIST
TROLLEYS |
![hoist trolleys](images/hoist_trolleys.jpg) |
|
Hoist
trolleys provide the connection between the lifting
device and the monorail. The trolleys are designed for
effortless movement along the track. The stamped body
fits most rigid hook or eye lifting devices. |
|
Wheels are tapered to match the 2° taper of the track.
This reduces rolling resistance and wheel wear. Wheels
contain ball bearings that are sealed and lubricated for
life.
Trolleys are designed to operate in temperatures from
+5° F to +200° F.
All trolleys meet or exceed the ANSI B30.11
specification for underhung bridge cranes. |
|
|
![festoon glides](images/festoon_gliders.jpg) |
|
|
|
|
|
|
2 |
|
FESTOON
GLIDES |
|
|
Festoon
gliders are used to support flat cable along the
monorail, and they are standard on monorails of 63 feet
or less. No tools are required to attach the festooning to
the gliders. |
|
|
|
|
|
|
|
|
|
|
|
|
![festoon trolleys](images/festoon_trolleys.jpg) |
|
|
|
|
|
3 |
|
FESTOON
TROLLEYS |
|
Festoon
trolleys (optional) are used to support flat cable
or air hose along the monorail. The trolleys have four
wheels and a pivoting festoon saddle support. They are
ideally suited for long runways (greater than 63 feet) or
with round cable or air hose. With monorails greater than
63 feet or with an all aluminum system, festoon trolleys
are standard. Special festoon trolleys for vacuum hose
are also available. |
|
|
|
|
|
|
|
|
|
![festoon clamps](images/festoon_clamps.jpg) |
|
|
|
|
|
4 |
|
FESTOON
CLAMPS |
|
Festoon
clamps anchor the festooning at the start of the
monorail. They also prevent the festoon gliders from
exiting the track and they can provide a redundant stop
of the trolley. |
|
|
|
|
|
|
|
|
|
![end stop bumpers](images/end_stop_bumpers.jpg) |
|
|
|
|
|
5 |
|
END
STOP BUMPERS |
|
High-impact
molded end stop bumpers are provided on
all monorails, to prevent the trolley from exiting the
track. The bumpers are bolted to the track to physically
limit the travel of the trolley. |
|
|
|
|
|
|
|
|
|
![universal bumpers](images/universal%20bumpers.jpg) |
|
|
|
|
|
6 |
|
UNIVERSAL
BUMPERS |
|
A
universal bumper can be used as a secondary end
stop, either internally or externally. |
|
|
|
|
|
|
|
|
|
![stack sections](images/stack_sections.jpg) |
|
7 |
|
STACK
SECTIONS |
|
A
stack section at one end of a monorail serves as an
extension that allows festoon carriers to be stored on the
end of the monorail without reducing hoist coverage. |
|
|
|
|
|
8 |
|
FLAT
CABLE AND/OR AIR HOSE |
|
A
flat cable festooning system is included in all
monorails. Plenty of cable is provided for 3 foot loops
on the monorail.
Optional air hose is also available and is supported by
optional festoon trolleys. |
|
|
|
|
|
![standard hangers plain steel track](images/hangers_plain_steel_track.jpg) |
|
9 |
|
HANGER
ASSEMBLIES |
|
Each
monorail is provided with the number of standard
hanger assemblies listed, based on the maximum "L1"
spacing shown in this page. Sway bracing is required
on all systems, except flush-mounted systems. Sway
bracing kits are not included in the monorail kit (see
Sway Brace Fitting caption on this page). |
|
|
|
|
|
Standard
Hangers for Plain Steel Track |
|
|
|
|
Standard
Hangers - Plain Steel Track |
|
|
|
|
|
Standard
hangers for plain steel track, with a 20 inch
threaded rod (B7 alloy), are included with each
assembly. The threaded rod can be field cut to custom
lengths as required. An optional 72 inch rod can also be
supplied. Two beam clips are bolted to the upper hanger
bracket and are clamped to the supporting structure. The
upper hanger brackets are adjustable for flange widths
from 1 to 10 inches. |
|
|
![standard hangers trussed steel track](images/hangers_trussed_steel_track.jpg) |
|
|
|
|
|
|
Standard
Hangers for Trussed Steel Track |
|
|
|
|
|
Standard
hangers for trussed steel track, with a 20 inch
threaded rod (B7 alloy), are included with each
assembly. The threaded rod can be field cut to custom
lengths as required. An optional 72 inch rod can also be
supplied. Two beam clips are bolted to the upper hanger
bracket and are clamped to the supporting structure. The
upper hanger brackets are adjustable for flange widths
from 1 to 10 inches. |
Standard
Hangers - Trussed Steel Track |
|
|
|
![standard hangers aluminum track](images/hangers_aluminum_track.jpg) |
|
|
|
|
|
|
Standard
Hangers for Aluminum Track |
|
|
|
|
|
Standard
hangers for aluminum track, with a 20 inch
threaded rod (B7 alloy), are included with each
assembly. The threaded rod can be field cut to custom
lengths as required. An optional 72 inch rod can also be
supplied. Two beam clips are bolted to the upper hanger
bracket and are clamped to the supporting structure. The
upper hanger brackets are adjustable for flange widths
from 1 to 10 inches. |
Standard
Hangers - Aluminum Track |
|
|
|
![sway bracing fitting](images/sway_bracing_fitting.jpg) |
|
|
|
|
|
|
SWAY
BRACING FITTING |
|
|
|
|
|
(Not
supplied as standard) see options below. |
|
|
|
|
|
Sway
bracing is required on all systems except flush
mounted systems to provide for a rigid-mount runway
that allows the trolley to move freely. The fittings permit
easy sway bracing with 1 inch standard steel pipe (pipe
optional below). The flange is drilled to accept a 5/8 inch
bolt (bolt by others) with two U-bolts (furnished). |
|
|
|
|
Sway
Bracing Fitting |
|
|
|
|
|
|
|
|
|
![flush mounted hanger parallel](images/flush_mounted_hangers_parallel.jpg) |
|
FLUSH-MOUNTED
HANGERS -
PARALLEL MOUNT |
|
|
|
|
An
optional ceiling-support bracket, with beam clips,
can be provided for plain track series that require flush
mounting. With this bracket, the track is mounted
underneath, parallel to the supporting steel. Two beam
clips are bolted to the hanger bracket and are clamped
to the supporting structure. When using this style, care
should be taken to determine if the monorail has
adequate overhead clearance. Note: to order this
bracket, the flange width of the supporting structure
must be supplied. |
|
|
|
Flush-Mounted
Hangers - Parallel |
|
|
|
|
|
|
|
![flush mounted hangers perpendicular](images/flush_mounted_hangers_perpendicular.jpg) |
|
|
|
|
FLUSH-MOUNTED
HANGERS -
PERPENDICULAR MOUNT |
|
|
|
|
An
optional ceiling-support bracket, with beam clips,
can be provided for plain track series that require flush
mounting. With this bracket, the track is mounted
underneath, perpendicular to the supporting steel. Four
beam clips are bolted to the hanger bracket and are
clamped to the supporting structure. When using this
style, care should be taken to determine if the monorail
has adequate overhead clearance. Note: to order this
bracket, the flange width of the supporting structure
must be supplied. |
|
|
|
Flush-Mounted
Hangers - Perpendicular |
|
|
![splice joint aluminum track](images/splice_joint_aluminum_track.jpg) |
|
|
|
![splice joint steel track](images/splice_joint_steel_track.gif) |
|
|
|
|
|
|
|
SPLICE
JOINTS FOR
ALUMINUM TRACK |
SPLICE
JOINTS FOR
STEEL TRACK |
|
|
|
|
|
Patented
splice joints for aluminum track allow for
precision alignment. The aluminum track is extruded
with four patented alignment slots. Four precision-
ground pins are provided to accurately align runway
sections, which provides for a smoother transition of
wheels over the spice joint than is possible with bolted
connections. In addition, clamp fasteners attach to the
vertical web of the track to pull the track together and
keep it from separating. |
|
|
A
splice joint is used to join track sections together
and enable the installer to quickly and properly align
the joined sections of track. Adjusting bolts are
provided on the splice joint for leveling and aligning. |
|
|
|
|
|
|
|
|
![monorails enclosed track design drawing](images/ceiling_mounted_work_station_monorail_drawing.jpg) |
|
|
|
|
|
|
![](images/model_no_click_yellow.gif) |
|
Order
Online, by Phone, or by E-Mail |
|
|
|
~ Add
items to your online shopping cart ~
Click the Model No. of the item you wish
to purchase. |
|
|
PRICING
- 250# CEILING MOUNTED WORK STATION - MONORAILS |
|
Price
includes: monorail track, hoist trolley, end stops, flat wire festooning,
festoon gliders (festoon trolleys
on steel monorail lengths greater than 63' and all aluminum systems), festoon
stack-up section, splice joints and
hanger brackets. Sway bracing is required on all systems except flush mounted
systems. Sway bracing kits are
available but are not included in the monorail kit. |
|
250 # CAPACITY |
MODEL NO. |
WEIGHT (LBS) |
MONORAIL
(L) |
TRACK
MATL. |
MAX
L1 |
T1
IN. |
H1
IN |
H2
IN. |
L3
IN |
L7
IN |
HANGERS
(see note)* |
PRICE |
GLM250-11.5 |
102 |
11' 6" |
Steel |
6' |
1-1/2 |
- |
1-3/4 |
5 |
9 |
3 @ 365# |
$1,246 |
GLMS250-11.5 |
115 |
Steel |
20' |
1-1/2 |
9 |
1-3/4 |
5 |
9 |
2 @ 446# |
$1,282 |
ALM250-11.5 |
178 |
Alum. |
20' |
2-5/8 |
- |
8 |
7-1/4 |
9 |
2 @ 430# |
$1,998 |
GLM250-23 |
128 |
23' |
Steel |
6' |
1-1/2 |
- |
1-3/4 |
5 |
9 |
5 @ 365# |
$1,684 |
GLMS250-23 |
127 |
Steel |
20' |
1-1/2 |
9 |
1-3/4 |
5 |
9 |
2 @ 446# |
$1,785 |
ALM250-23 |
217 |
Alum. |
20' |
2-5/8 |
- |
8 |
7-1/4 |
13 |
2 @ 430# |
$2,196 |
GLMSL250-28 |
238 |
28' |
Steel |
25' |
1-1/2 |
11 |
1-3/4 |
5 |
9 |
2 @ 554# |
$2,526 |
GLM250-33 |
159 |
33' |
Steel |
6' |
1-1/2 |
- |
1-3/4 |
5 |
9 |
7 @ 365# |
$2,345 |
GLMS250-33 |
166 |
Steel |
20' |
1-1/2 |
9 |
1-3/4 |
5 |
9 |
3 @ 446# |
$2,633 |
ALM250-33 |
257 |
Alum. |
20' |
2-5/8 |
- |
8 |
7-1/4 |
19 |
3 @ 430# |
$3,279 |
GLM250-43 |
234 |
43' |
Steel |
6' |
1-1/2 |
- |
1-3/4 |
5 |
13 |
9 @ 365# |
$2,850 |
GLMS250-43 |
259 |
Steel |
20' |
1-1/2 |
9 |
1-3/4 |
5 |
13 |
3 @ 446# |
$3,070 |
ALM250-43 |
292 |
Alum. |
20' |
2-5/8 |
- |
8 |
7-1/4 |
26 |
3 @ 430# |
$3,882 |
GLM250-53 |
301 |
53' |
Steel |
6' |
1-1/2 |
- |
1-3/4 |
5 |
13 |
11 @ 365# |
$3,505 |
GLMS250-53 |
319 |
Steel |
20' |
1-1/2 |
9 |
1-3/4 |
5 |
13 |
4 @ 446# |
$3,913 |
ALM250-53 |
331 |
Alum. |
20' |
2-5/8 |
- |
8 |
7-1/4 |
30 |
4 @ 430# |
$4,932 |
GLMSL250-53 |
454 |
Steel |
25' |
1-1/2 |
11 |
1-3/4 |
5 |
13 |
3 @ 554# |
$4,524 |
GLM250-63 |
376 |
63' |
Steel |
6' |
1-1/2 |
- |
1-3/4 |
5 |
19 |
13 @ 365# |
$4,012 |
GLMS250-63 |
412 |
Steel |
20' |
1-1/2 |
9 |
1-3/4 |
5 |
19 |
3 @ 446# |
$4,352 |
ALM250-63 |
366 |
Alum. |
20' |
2-5/8 |
- |
8 |
7-1/4 |
36 |
3 @ 430# |
$5,527 |
GLMSL250-78 |
671 |
78' |
Steel |
25' |
1-1/2 |
11 |
1-3/4 |
5 |
46 |
4 @ 554# |
Call |
GLM250-83 |
428 |
83' |
Steel |
6' |
1-1/2 |
- |
1-3/4 |
5 |
46 |
17 @ 365# |
Call |
GLMS250-83 |
472 |
Steel |
20' |
1-1/2 |
9 |
1-3/4 |
5 |
46 |
5 @ 446# |
Call |
ALM250-83 |
440 |
Alum. |
20' |
2-5/8 |
- |
8 |
7-1/4 |
46 |
5 @ 430# |
Call |
GLM250-103 |
500 |
103' |
Steel |
6' |
1-1/2 |
- |
1-3/4 |
5 |
54 |
24 @ 365# |
Call |
GLMS250-103 |
558 |
Steel |
20' |
1-1/2 |
9 |
1-3/4 |
5 |
54 |
6 @ 446# |
Call |
ALM250-103 |
515 |
Alum. |
20' |
2-5/8 |
- |
8 |
7-1/4 |
54 |
6 @ 430# |
Call |
GLMSL250-103 |
888 |
Steel |
25' |
1-1/2 |
11 |
1-3/4 |
5 |
54 |
5 @ 554# |
Call |
|
NOTE: *This column provides the total number of support
hangers with the corresponding vertical load applied by
each support hanger (in pounds) based on the "L1" dimension shown
Up to a 20" hanger drop will be provided.
Additional hanger points or longer drops can be provided at an additional
charge. |
|
PRICING
- 500# CEILING MOUNTED WORK STATION - MONORAILS |
|
|
|
![](images/model_no_click_yellow.gif) |
|
Order
Online, by Phone, or by E-Mail |
|
|
|
~ Add
items to your online shopping cart ~
Click the Model No. of the item you wish
to purchase. |
|
|
Price
includes: monorail track, hoist trolley, end stops, flat wire festooning,
festoon gliders (festoon trolleys
on steel monorail lengths greater than 63' and all aluminum systems), festoon
stack-up section, splice joints and
hanger brackets. Sway bracing is required on all systems except flush mounted
systems. Sway bracing kits are
available but are not included in the monorail kit. |
|
500 # CAPACITY |
MODEL
NO. |
WEIGHT
(LBS) |
MONORAIL
(L) |
TRACK
MATL. |
MAX
L1 |
T1
IN. |
H1
IN |
H2
IN. |
L3
IN |
L7
IN |
HANGERS
(see note)* |
PRICE |
GLM500-11.5 |
127 |
11' 6" |
Steel |
6' |
2-3/4 |
- |
2-3/8 |
7-1/8 |
9 |
3 @ 725# |
$1,425 |
GLMS500-11.5 |
148 |
Steel |
20' |
2-3/4 |
10 |
2-3/8 |
7-1/8 |
9 |
2 @ 845# |
$1,471 |
ALM500-11.5 |
200 |
Alum. |
20' |
2-5/8 |
- |
10 |
7-1/4 |
9 |
2 @ 794# |
$2,360 |
GLM500-23 |
181 |
23' |
Steel |
6' |
2-3/4 |
- |
2-3/8 |
7-1/8 |
9 |
5 @ 725# |
$1,947 |
GLMS500-23 |
199 |
Steel |
20' |
2-3/4 |
10 |
2-3/8 |
7-1/8 |
9 |
2 @ 845# |
$2,125 |
ALM500-23 |
264 |
Alum. |
20' |
2-5/8 |
- |
10 |
7-1/4 |
13 |
2 @ 794# |
$2,570 |
GLMSL500-28 |
312 |
28' |
Steel |
25' |
2-3/4 |
12-3/8 |
2-3/8 |
7-1/8 |
9 |
2 @ 943# |
$2,800 |
GLM500-33 |
240 |
33' |
Steel |
6' |
2-3/4 |
- |
2-3/8 |
7-1/8 |
9 |
7 @ 725# |
$2,715 |
GLMS500-33 |
261 |
Steel |
20' |
2-3/4 |
10 |
2-3/8 |
7-1/8 |
9 |
3 @ 845# |
$3,134 |
ALM500-33 |
322 |
Alum. |
20' |
2-5/8 |
- |
10 |
7-1/4 |
19 |
3 @ 794# |
$3,824 |
GLMSLX500-34 |
356 |
34' |
Steel |
30' |
2-3/4 |
14-3/8 |
2-3/8 |
7-1/8 |
9 |
2 @ 991# |
$3,267 |
GLM500-43 |
347 |
43' |
Steel |
6' |
2-3/4 |
- |
2-3/8 |
7-1/8 |
13 |
9 @ 725# |
$3,283 |
GLMS500-43 |
395 |
Steel |
20' |
2-3/4 |
10 |
2-3/8 |
7-1/8 |
13 |
3 @ 845# |
$3,732 |
ALM500-43 |
379 |
Alum. |
20' |
2-5/8 |
- |
|
7-1/4 |
26 |
3 @ 794# |
$4,608 |
GLM500-53 |
441 |
53' |
Steel |
6' |
2-3/4 |
- |
2-3/8 |
7-1/8 |
13 |
11 @ 725# |
$4,046 |
GLMS500-53 |
488 |
Steel |
20' |
2-3/4 |
10 |
2-3/8 |
7-1/8 |
13 |
4 @ 845# |
$4,738 |
ALM500-53 |
436 |
Alum. |
20' |
2-5/8 |
- |
10 |
7-1/4 |
30 |
4 @ 794# |
$5,831 |
GLMSL500-53 |
598 |
Steel |
25' |
2-3/4 |
12-3/8 |
2-3/8 |
7-1/8 |
13 |
3 @ 943# |
$5,249 |
GLM500-63 |
548 |
63' |
Steel |
6' |
2-3/4 |
- |
2-3/8 |
7-1/8 |
19 |
23 @ 725# |
$4,611 |
GLMS500-63 |
604 |
Steel |
20' |
2-3/4 |
10 |
2-3/8 |
7-1/8 |
19 |
4 @ 845# |
$5,334 |
ALM500-63 |
493 |
Alum. |
20' |
2-5/8 |
- |
10 |
7-1/4 |
36 |
4 @ 794# |
$6,610 |
GLMSLX500-64 |
650 |
64' |
Steel |
30' |
2-3/4 |
14-3/8 |
2-3/8 |
7-1/8 |
36 |
3 @ 991# |
$6,225 |
GLMSL500-78 |
883 |
78' |
Steel |
25' |
2-3/4 |
12-3/8 |
2-3/8 |
7-1/8 |
46 |
4 @ 943# |
Call |
GLM500-83 |
626 |
83' |
Steel |
6' |
2-3/4 |
- |
2-3/8 |
7-1/8 |
46 |
17 @ 725# |
Call |
GLMS500-83 |
714 |
Steel |
20' |
2-3/4 |
10 |
2-3/8 |
7-1/8 |
46 |
5 @ 845# |
Call |
ALM500-83 |
607 |
Alum. |
20' |
2-5/8 |
- |
10 |
7-1/4 |
46 |
5 @ 794# |
Call |
GLMSLX500-94 |
961 |
94' |
Steel |
30' |
2-3/4 |
14-3/8 |
2-3/8 |
7-1/8 |
54 |
4 @ 991# |
Call |
GLM500-103 |
708 |
103' |
Steel |
6' |
2-3/4 |
- |
2-3/8 |
7-1/8 |
54 |
24 @ 725# |
Call |
GLMS500-103 |
819 |
Steel |
20' |
2-3/4 |
10 |
2-3/8 |
7-1/8 |
54 |
6 @ 845# |
Call |
ALM500-103 |
722 |
Alum. |
20' |
2-5/8 |
- |
10 |
7-1/4 |
54 |
6 @ 794# |
Call |
GLMSL500-103 |
1168 |
Steel |
25' |
2-3/4 |
12-3/8 |
2-3/8 |
7-1/8 |
54 |
5 @ 943# |
Call |
GLMSLX500-124 |
1272 |
124' |
Steel |
30' |
2-3/4 |
14-3/8 |
2-3/8 |
7-1/8 |
54 |
5 @ 991# |
Call |
|
NOTE: *This column provides the total number of support
hangers with the corresponding vertical load applied by
each support hanger (in pounds) based on the "L1" dimension shown
Up to a 20" hanger drop will be provided.
Additional hanger points or longer drops can be provided at an additional
charge. |
|
PRICING
- 1000# CEILING MOUNTED WORK STATION - MONORAILS |
|
Price
includes: monorail track, hoist trolley, end stops, flat wire festooning,
festoon gliders (festoon trolleys
on steel monorail lengths greater than 63' and all aluminum systems), festoon
stack-up section, splice joints
and hanger brackets. Sway bracing is required on all systems except flush
mounted systems. Sway bracing
kits are available but are not included in the monorail kit. |
|
|
![](images/model_no_click_yellow.gif) |
|
Order
Online, by Phone, or by E-Mail |
|
|
|
~ Add
items to your online shopping cart ~
Click the Model No. of the item you wish
to purchase. |
|
|
1000 # CAPACITY |
MODEL
NO. |
WEIGHT
(LBS) |
MONORAIL
(L) |
TRACK
MATL. |
MAX
L1 |
T1
IN. |
H1
IN |
H2
IN. |
L3
IN |
L7
IN |
HANGERS
(see note)* |
PRICE |
GLM1000-11.5 |
165 |
11' 6" |
Steel |
6' |
3 |
- |
3 |
7-7/8 |
9 |
3 @ 1451# |
$2,092 |
GLMS1000-11.5 |
216 |
Steel |
20' |
3 |
11 |
3 |
7-7/8 |
9 |
2 @ 1679# |
$1,885 |
ALM1000-11.5 |
236 |
Alum. |
20' |
2-7/8 |
- |
11 |
7-7/8 |
9 |
2 @ 1567# |
$3,032 |
GLM1000-23 |
211 |
23' |
Steel |
6' |
3 |
- |
3 |
7-7/8 |
9 |
5 @ 1451# |
$2,679 |
GLMS1000-23 |
278 |
Steel |
20' |
3 |
11 |
3 |
7-7/8 |
9 |
2 @ 1679# |
$2,680 |
ALM1000-23 |
335 |
Alum. |
20' |
2-7/8 |
- |
11 |
7-7/8 |
13 |
2 @ 1567# |
$3,425 |
GLMSL1000-28 |
505 |
28' |
Steel |
25' |
3 |
13-7/8 |
3 |
7-7/8 |
13 |
2 @ 1781# |
$3,178 |
GLM1000-33 |
304 |
33' |
Steel |
6' |
3 |
- |
3 |
7-7/8 |
13 |
7 @ 1451# |
$3,742 |
GLMS1000-33 |
375 |
Steel |
20' |
3 |
11 |
3 |
7-7/8 |
13 |
3 @ 1679# |
$3,821 |
ALM1000-33 |
420 |
Alum. |
20' |
2-7/8 |
- |
11 |
7-7/8 |
19 |
3 @ 1567# |
$4,952 |
GLMSLX1000-34 |
547 |
34' |
Steel |
30' |
3 |
17 |
3 |
7-7/8 |
13 |
2 @ 1951# |
$3,827 |
GLM1000-43 |
474 |
43' |
Steel |
6' |
3 |
- |
3 |
7-7/8 |
19 |
9 @ 1451# |
$4,578 |
GLMS1000-43 |
599 |
Steel |
20' |
3 |
11 |
3 |
7-7/8 |
19 |
3 @ 1679# |
$4,436 |
ALM1000-43 |
509 |
Alum. |
20' |
2-7/8 |
- |
11 |
7-7/8 |
26 |
3 @ 1567# |
$5,980 |
GLM1000-53 |
603 |
53' |
Steel |
6' |
3 |
- |
3 |
7-7/8 |
19 |
11 @ 1451# |
$5,635 |
GLMS1000-53 |
758 |
Steel |
20' |
3 |
11 |
3 |
7-7/8 |
19 |
4 @ 1679# |
$5,569 |
ALM1000-53 |
594 |
Alum. |
20' |
2-7/8 |
- |
11 |
7-7/8 |
30 |
4 @ 1567# |
$7,476 |
GLMSL1000-53 |
969 |
Steel |
25' |
3 |
13-7/8 |
3 |
7-7/8 |
19 |
3 @ 1728# |
$5,601 |
GLM1000-63 |
763 |
63' |
Steel |
6' |
3 |
- |
3 |
7-7/8 |
26 |
13 @ 1451# |
$6,478 |
GLMS1000-63 |
980 |
Steel |
20' |
3 |
11 |
3 |
7-7/8 |
26 |
4 @ 1679# |
$6,187 |
ALM1000-63 |
682 |
Alum. |
20' |
2-7/8 |
- |
11 |
7-7/8 |
36 |
4 @ 1567# |
$8,496 |
GLMSLX1000-64 |
1053 |
64' |
Steel |
30' |
3 |
17 |
3 |
7-7/8 |
36 |
3 @ 1915# |
$7,139 |
GLMSL1000-78 |
1663 |
78' |
Steel |
25' |
3 |
13-7/8 |
3 |
7-7/8 |
46 |
4 @ 1781# |
Call |
GLM1000-83 |
884 |
83' |
Steel |
6' |
3 |
- |
3 |
7-7/8 |
46 |
17 @ 1451# |
Call |
GLMS1000-83 |
1139 |
Steel |
20' |
3 |
11 |
3 |
7-7/8 |
46 |
5 @ 1679# |
Call |
ALM1000-83 |
856 |
Alum. |
20' |
2-7/8 |
- |
11 |
7-7/8 |
46 |
5 @ 1567# |
Call |
GLMSLX1000-94 |
1558 |
94' |
Steel |
30' |
3 |
17 |
3 |
7-7/8 |
54 |
4 @ 1915# |
Call |
GLM1000-103 |
1037 |
103' |
Steel |
6' |
3 |
- |
3 |
7-7/8 |
54 |
24 @ 1451# |
Call |
GLMS1000-103 |
1344 |
Steel |
20' |
3 |
11 |
3 |
7-7/8 |
54 |
6 @ 1679# |
Call |
ALM1000-103 |
1030 |
Alum. |
20' |
2-7/8 |
- |
11 |
7-7/8 |
54 |
6 @ 1567# |
Call |
GLMSL1000-103 |
2203 |
Steel |
25' |
3 |
13-7/8 |
3 |
7-7/8 |
54 |
5 @ 1781# |
Call |
GLMSLX1000-124 |
2063 |
124' |
Steel |
30' |
3 |
17 |
3 |
7-7/8 |
54 |
5 @ 1915# |
Call |
|
NOTE: *This column provides the total number of support
hangers with the corresponding vertical load applied by
each support hanger (in pounds) based on the "L1" dimension shown
Up to a 20" hanger drop will be provided.
Additional hanger points or longer drops can be provided at an additional
charge. |
|
PRICING
- 2000# CEILING MOUNTED WORK STATION - MONORAILS |
Price
includes: monorail track, hoist trolley, end stops, flat wire festooning,
festoon gliders (festoon trolleys
on steel monorail lengths greater than 63' and all aluminum systems), festoon
stack-up section, splice joints
and hanger brackets. Sway bracing is required on all systems except flush
mounted systems. Sway bracing
kits are available but are not included in the monorail kit. |
|
|
|
![](images/model_no_click_yellow.gif) |
|
Order
Online, by Phone, or by E-Mail |
|
|
|
~ Add
items to your online shopping cart ~
Click the Model No. of the item you wish
to purchase. |
|
|
2000 # CAPACITY |
MODEL
NO. |
WEIGHT
(LBS) |
MONORAIL
(L) |
TRACK
MATL. |
MAX
L1 |
T1
IN. |
H1
IN |
H2
IN. |
L3
IN |
L7
IN |
HANGERS
(see note)* |
PRICE |
GLM2000-11.5 |
241 |
11' 6" |
Steel |
6' |
2-7/8 |
- |
3-1/2 |
8-1/8 |
9 |
3 @ 2894# |
$2,424 |
GLMS2000-11.5 |
287 |
Steel |
20' |
2-7/8 |
12 |
3-1/2 |
8-1/8 |
9 |
2 @ 3137# |
$2,033 |
ALM2000-11.5 |
303 |
Alum. |
20' |
2-7/8 |
- |
13-1/4 |
12-7/8 |
9 |
2 @ 3046# |
$3,331 |
GLM2000-23 |
308 |
23' |
Steel |
6' |
2-7/8 |
- |
3-1/2 |
8-1/8 |
9 |
5 @ 2894# |
$3,272 |
GLMS2000-23 |
378 |
Steel |
20' |
2-7/8 |
12 |
3-1/2 |
8-1/8 |
9 |
2 @ 3137# |
$2,860 |
ALM2000-23 |
480 |
Alum. |
20' |
2-7/8 |
- |
13-1/4 |
12-7/8 |
13 |
2 @ 3046# |
$3,703 |
GLMSL2000-28 |
674 |
28' |
Steel |
25' |
2-7/8 |
15-3/8 |
3-1/2 |
8-1/8 |
9 |
2 @ 3308# |
$4,010 |
GLM2000-33 |
438 |
33' |
Steel |
6' |
2-7/8 |
- |
3-1/2 |
8-1/8 |
13 |
7 @ 2894# |
$4,569 |
GLMS2000-33 |
522 |
Steel |
20' |
2-7/8 |
12 |
3-1/2 |
8-1/8 |
13 |
3 @ 3137# |
$4,189 |
ALM2000-33 |
620 |
Alum. |
20' |
2-7/8 |
- |
13-1/4 |
12-7/8 |
19 |
3 @ 3046# |
$5,341 |
GLMSLX2000-34 |
731 |
34' |
Steel |
30' |
2-7/8 |
18 |
3-1/2 |
8-1/8 |
13 |
2 @ 2894# |
$4,174 |
GLM2000-43 |
656 |
43' |
Steel |
6' |
2-7/8 |
- |
3-1/2 |
8-1/8 |
19 |
9 @ 2894# |
$5,701 |
GLMS2000-43 |
820 |
Steel |
20' |
2-7/8 |
12 |
3-1/2 |
8-1/8 |
19 |
3 @ 3137# |
$4,389 |
ALM2000-43 |
781 |
Alum. |
20' |
2-7/8 |
- |
13-1/4 |
12-7/8 |
26 |
3 @ 3046# |
$6,440 |
GLM2000-53 |
855 |
53' |
Steel |
6' |
2-7/8 |
- |
3-1/2 |
8-1/8 |
19 |
11 @ 2894# |
$6,814 |
GLMS2000-53 |
1034 |
Steel |
20' |
2-7/8 |
12 |
3-1/2 |
8-1/8 |
19 |
4 @ 3137# |
$6,247 |
ALM2000-53 |
919 |
Alum. |
20' |
2-7/8 |
- |
13-1/4 |
12-7/8 |
30 |
4 @ 3046# |
$8,044 |
GLMSL2000-53 |
1298 |
Steel |
25' |
2-7/8 |
15-3/8 |
3-1/2 |
8-1/8 |
19 |
3 @ 3308# |
$7,219 |
GLM2000-63 |
1037 |
63' |
Steel |
6' |
2-7/8 |
- |
3-1/2 |
8-1/8 |
26 |
13 @ 2894# |
$7,773 |
GLMS2000-63 |
1331 |
Steel |
20' |
2-7/8 |
12 |
3-1/2 |
8-1/8 |
26 |
4 @ 3137# |
$6,981 |
ALM2000-63 |
1080 |
Alum. |
20' |
2-7/8 |
- |
13-1/4 |
12-7/8 |
36 |
4 @ 3046# |
$9,139 |
GLMSLX2000-64 |
1412 |
64' |
Steel |
30' |
2-7/8 |
18 |
3-1/2 |
8-1/8 |
36 |
3 @ 3402# |
$7,808 |
GLMSL2000-78 |
1921 |
78' |
Steel |
25' |
2-7/8 |
15-3/8 |
3-1/2 |
8-1/8 |
46 |
4 @ 3308# |
Call |
GLM2000-83 |
1231 |
83' |
Steel |
6' |
2-7/8 |
- |
3-1/2 |
8-1/8 |
46 |
17 @ 2894# |
Call |
GLMS2000-83 |
1525 |
Steel |
20' |
2-7/8 |
12 |
3-1/2 |
8-1/8 |
46 |
5 @ 3137# |
Call |
ALM2000-83 |
1379 |
Alum. |
20' |
2-7/8 |
- |
13-1/4 |
12-7/8 |
46 |
5 @ 3046# |
Call |
GLMSLX2000-94 |
2092 |
94' |
Steel |
30' |
2-7/8 |
18 |
3-1/2 |
8-1/8 |
54 |
4 @ 3402# |
Call |
GLM2000-103 |
1407 |
103' |
Steel |
6' |
2-7/8 |
- |
3-1/2 |
8-1/8 |
54 |
24 @ 2894# |
Call |
GLMS2000-103 |
1771 |
Steel |
20' |
2-7/8 |
12 |
3-1/2 |
8-1/8 |
54 |
6 @ 3137# |
Call |
ALM2000-103 |
1680 |
Alum. |
20' |
2-7/8 |
- |
13-1/4 |
12-7/8 |
54 |
6 @ 3046# |
Call |
GLMSL2000-103 |
2544 |
Steel |
25' |
2-7/8 |
15-3/8 |
3-1/2 |
8-1/8 |
54 |
5 @ 3308# |
Call |
GLMSLX2000-124 |
2772 |
124' |
Steel |
30' |
2-7/8 |
18 |
3-1/2 |
8-1/8 |
54 |
5 @ 3402# |
Call |
|
NOTE: *This column provides the total number of support
hangers with the corresponding vertical load applied by
each support hanger (in pounds) based on the "L1" dimension shown
Up to a 20" hanger drop will be provided.
Additional hanger points or longer drops can be provided at an additional
charge. |
|
PRICING
- 4000# CEILING MOUNTED WORK STATION - MONORAILS |
|
Price
includes: monorail track, hoist trolley, end stops, flat wire festooning,
festoon gliders (festoon trolleys
on steel monorail lengths greater than 63' and all aluminum systems), festoon
stack-up section, splice joints
and hanger brackets. Sway bracing is required on all systems except flush
mounted systems. Sway bracing
kits are available but are not included in the monorail kit. |
|
|
|
![](images/model_no_click_yellow.gif) |
|
Order
Online, by Phone, or by E-Mail |
|
|
|
~ Add
items to your online shopping cart ~
Click the Model No. of the item you wish
to purchase. |
|
|
4000 # CAPACITY |
MODEL NO. |
WEIGHT
(LBS) |
MONORAIL
(L) |
TRACK
MATL. |
MAX
L1 |
T1
IN. |
H1
IN |
H2
IN. |
L3 IN |
L7
IN |
HANGERS
(see note)* |
PRICE |
GLM4000-23 |
763 |
23' |
Steel |
6' |
2-7/8 |
- |
3-1/2 |
15-1/8 |
9 |
5 @ 5664# |
$3,997 |
GLMS4000-23 |
872 |
Steel |
20' |
2-7/8 |
18 |
3-1/2 |
15-1/8 |
9 |
2 @ 5995# |
$5,160 |
GLMSL4000-28 |
1013 |
28' |
Steel |
25' |
2-7/8 |
20 |
3-1/2 |
15-1/8 |
13 |
2 @ 6093# |
$5,709 |
GLM4000-33 |
1116 |
33' |
Steel |
6' |
2-7/8 |
- |
3-1/2 |
15-1/8 |
13 |
7 @ 5664# |
$6,181 |
GLMS4000-33 |
1173 |
Steel |
20' |
2-7/8 |
18 |
3-1/2 |
15-1/8 |
13 |
3 @ 5995# |
$7,484 |
GLM4000-43 |
1316 |
43' |
Steel |
6' |
2-7/8 |
- |
3-1/2 |
15-1/8 |
19 |
9 @ 5664# |
$7,006 |
GLMS4000-43 |
1332 |
Steel |
20' |
2-7/8 |
18 |
3-1/2 |
15-1/8 |
19 |
3 @ 5995# |
$8,335 |
GLM4000-53 |
1499 |
53' |
Steel |
6' |
2-7/8 |
- |
3-1/2 |
15-1/8 |
19 |
11 @ 5664# |
$8,528 |
GLMS4000-53 |
1663 |
Steel |
20' |
2-7/8 |
18 |
3-1/2 |
15-1/8 |
19 |
4 @ 5995# |
$10,677 |
GLMSL4000-53 |
1866 |
Steel |
25' |
2-7/8 |
20 |
3-1/2 |
15-1/8 |
19 |
3 @ 6093# |
$9,890 |
GLM4000-63 |
1799 |
63' |
Steel |
6' |
2-7/8 |
- |
3-1/2 |
15-1/8 |
26 |
13 @ 5664# |
$9,604 |
GLMS4000-63 |
1991 |
Steel |
20' |
2-7/8 |
18 |
3-1/2 |
15-1/8 |
26 |
4 @ 5995# |
$11,440 |
GLMSL4000-78 |
2718 |
78' |
Steel |
25' |
2-7/8 |
20 |
3-1/2 |
15-1/8 |
46 |
4 @ 6093# |
Call |
GLM4000-83 |
2212 |
83' |
Steel |
6' |
2-7/8 |
- |
3-1/2 |
15-1/8 |
46 |
17 @ 5664# |
Call |
GLMS4000-83 |
2550 |
Steel |
20' |
2-7/8 |
18 |
3-1/2 |
15-1/8 |
46 |
5 @ 5995# |
Call |
GLM4000-103 |
2695 |
103' |
Steel |
6' |
2-7/8 |
- |
3-1/2 |
15-1/8 |
54 |
21 @ 5664# |
Call |
GLMS4000-103 |
3110 |
Steel |
20' |
2-7/8 |
18 |
3-1/2 |
15-1/8 |
54 |
6 @ 5995# |
Call |
GLMSL4000-103 |
3570 |
Steel |
25' |
2-7/8 |
20 |
3-1/2 |
15-1/8 |
54 |
5 @ 6093# |
Call |
|
NOTE: *This column provides the total number of support
hangers with the corresponding vertical load applied by
each support hanger (in pounds) based on the "L1" dimension shown
Up to a 20" hanger drop will be provided.
Additional hanger points or longer drops can be provided at an additional
charge. |
|
|
|
![](images/model_no_click_yellow.gif) |
|
Order
Online, by Phone, or by E-Mail |
|
|
|
~ Add
items to your online shopping cart ~
Click the Model No. of the item you wish
to purchase. |
|
|
OPTIONS |
|
|
|
|
|
PRICING
- SWAY BRACE FITTING |
|
|
|
|
|
![sway brace fitting](images/sway_bracing_fitting_drawing.gif) |
|
|
|
|
|
|
MODEL NO. |
WEIGHT |
PRICE |
B-562 |
1# |
$26.30 |
|
|
|
|
|
|
|
These
clamps permit easy sway bracing with 1" outside diameter standard pipe
(pipe by
others). Clamps have a black zinc finish. Mounting hole in fitting is drilled
to accept 5/8"
mounting bolt (bolt by others). U-bolts are furnished. These fittings are
NOT INCLUDED
with monorail kit. |
|
|
|
|
|
|
|
|
|
PRICING
- SWAY BRACE PIPE AND ANGLE |
|
|
|
|
![sway brace pipe and angle](images/pipe_angle_drawing.gif) |
|
|
|
|
Now
we offer sway brace pipe and angle as
components that can be added to your Ceiling
Mounted Work Station Crane order. Both pipe
and angle can be ordered in CraneBrain or by
contacting us. They are constructed of unpainted
steel and are available in the lengths shown below. |
|
|
|
|
|
|
|
SWAY BRACE PIPE |
Model No. |
Description |
Length |
Weight |
Price |
|
1" SCH40 |
10'-6" |
18# |
$49.30 |
|
1" SCH40 |
21'-0" |
35# |
$103.53 |
|
1" SCH80 |
21'-0" |
46# |
$190.63 |
|
|
|
SWAY BRACE ANGLE |
Model No. |
Description |
Length |
Weight |
Price/ft. |
|
2 x 2 x 1/4" |
20'-0" |
64# |
$6.57 |
|
2-1/2 x 2-1/2 x 1/4" |
20'-0" |
84# |
$8.20 |
|
3 x 3 x 1/4" |
20'-0" |
98# |
$9.90 |
|
|
|
|
|
THE SOLUTION FOR TRUE LINEAR MOVEMENT |
![work station bridge cranes](images/solution_true_linear_movement_drawing.gif) |
|
|
|
|
Monorails
can be readily adapted for more
sophisticated applications by the addition of extra
tracks, curves, switches, and interlocks (transfers)
that can be easily integrated into a total system. The
pre-engineered modular designs offer the ultimate in
flexibility, in layout, and in design for your manufacturing
facility. |
|
|
|
|
System
priced upon request. |
|
|
|
|
|
|
![](images/price_click_yellow.gif) |
|
Order
Online, by Phone, or by E-Mail |
|
|
|
~ Add
items to your online shopping cart ~
Click the Price of the item you wish to
purchase. |
|
|
PRICING
- MONORAIL CURVE |
|
|
|
|
|
|
The
monorail curve is a section of track that
is rolled to provide a 90° curve. The curved
sections have a straight section which projects
beyond the curve. The curve needs to be
supported with three hangers, one in the
center, one at one end just outside the splice
joint, and one at the other end just inside the
splice joint. |
|
CAP. (lbs.) |
250 |
500 |
1000 |
2000 |
PRICE |
|
|
|
|
PART NO. |
curve kit |
curve kit |
curve kit |
curve kit |
RADIUS |
23-5/8" |
23-5/8" |
31-3/8" |
41" |
X |
31-5/8" |
31-5/8" |
45" |
51" |
WEIGHT |
17# |
27# |
53# |
73# |
|
|
|
|
|
|
|
|
|
|
|
|
|
Curve
is painted blue. Hangers (3 required) and track
splice joints are not included. 4 hangers required for
2000#. 4000# capacities are not available. Each hanger
must be braced to prevent movement "S" curve layouts
may require custom trolleys. Consult us for festooning
requirements. |
![monorail curve](images/monorail_curve.jpg) |
|
|
|
|
|
![monorail curve kit](images/recommended_hanger_points_drawing.gif) |
|
|
|
|
Greater
pull forces may be required. 100:1 productivity
ratio does not apply. |
|
|
|
|
PART
NUMBER: CURVE.KIT_____(fill in capacity) |
|
|
|
|
|
|
|
|
|
INTERLOCKS
(TRANSFERS) |
|
SWITCHES |
|
|
|
Interlocks
are used to transfer materials from the
working area of the bridge crane to storage monorails,
and vice versa. Request the Interlocks (Transfers) flyer
for additional information.
Priced upon request. |
Limited
sizes of switches can be provided. Please
contact us for additional information. |
|
|
|
|
|
|
![](images/price_click_yellow.gif) |
|
Order
Online, by Phone, or by E-Mail |
|
|
|
~ Add
items to your online shopping cart ~
Click the Price of the item you wish to
purchase. |
|
|
PRICING
- SWITCHES |
|
|
|
|
|
![hanger points](images/switches_drawing.jpg) |
|
|
PART
NUMBER: SWITCH.KIT Track series - Switch direction
(R)ight (L)eft - Electrified (Y)es or (N)o. |
|
|
|
|
|
|
CAP. (lbs.) |
250 |
500 |
1000 |
1000 |
2000 |
2000 |
|
L / R |
L / R |
L |
R |
L |
R |
PRICE |
|
|
|
|
|
|
PART NO. |
switch kit |
switch kit |
switch kit |
switch kit |
switch kit |
switch kit |
A |
30-5/16" |
32-9/16" |
40-1/2" |
40-1/2" |
50-1/4" |
50-1/4" |
B |
27-9/16" |
27-9/16" |
44-1/2" |
41-1/2" |
48-3/4" |
48-3/4" |
C |
22-3/16" |
28-15/16" |
42" |
44-1/2" |
48-15/16" |
48-15/16" |
H |
1-1/16" |
1-15/16" |
11-1/2" |
11-1/2" |
12" |
12" |
WEIGHT |
29# |
33# |
294# |
294# |
359# |
359# |
|
Drawing
is only a representation.
Arrangements will vary per
application. |
|
|
|
|
|
|
|
|
|
|
|
|
|
Available
in right or left hand (shown above) versions. 4 bar conductor
(not included) available for 1000# & 2000# switches only. Four (4)
hangers (not included). 4000# capacities are not available. |
Greater
pull forces may be required.
100:1 productivity ratio does not apply. |
|
PRICING
- HANGERS |
|
|
|
|
|
|
|
![hanger kit](images/hanger_parts_number.gif) |
![hangers](images/hanger_kit_drawing.gif) |
|
|
|
|
|
|
Hanger
assembly is painted blue. Includes beam clip and
hardware when threaded rod is provided. Fits flange
widths of 1" to 3", 3-1/4" to 5-1/4", 5-1/2" to
7-1/2",
and 8" to 10" and flange thickness up to 1/2" max.
for 250-500 lb. and 3/4" max. for 1000-4000 lb.
Please consult us for flanges not listed above. Sway
bracing is required except for flush mount applications. |
|
For
sloped ceiling consult us. |
|
|
*Hanger
drops greater than 6' we recommend rigid
hanger drops (by other). |
|
|
![](images/price_click_yellow.gif) |
|
Order
Online, by Phone, or by E-Mail |
|
|
|
~ Add
items to your online shopping cart ~
Click the Price of the item you wish to
purchase. |
|
|
STANDARD
HANGER ASSEMBLY
For
PLAIN STEEL track series 250# - 2000# |
|
|
|
|
|
|
|
|
|
|
|
Capacity (lbs.) |
250 |
500 |
1000 |
2000 |
No Rod |
Price (each) |
|
|
|
|
H (minimum) |
8" |
8-7/8" |
10-1/8" |
10-5/8" |
Weight |
16# |
18# |
24# |
27# |
20" Rod |
Price (each) |
|
|
|
|
Weight |
18# |
20# |
26# |
29# |
72" Rod |
Price (each) |
|
|
|
|
Weight |
21# |
23# |
29# |
32# |
|
|
|
|
|
|
|
|
|
|
|
|
![standard hanger assembly](images/hanger_plain_steel_250_drawing.gif) |
|
|
|
|
|
|
|
|
|
|
|
|
|
Rods
are 5/8" in diameter. B7 Alloy - all thread. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
STANDARD
HANGER ASSEMBLY
For
TRUSSED STEEL track series 250# - 2000# |
|
|
|
|
|
|
|
Capacity (lbs.) |
250 |
500 |
1000 |
2000 |
No Rod |
Price (each) |
|
|
|
|
H (minimum) |
6-1/4" |
6-1/4" |
7" |
7" |
Weight |
17# |
18# |
24# |
25# |
20" Rod |
Price (each) |
|
|
|
|
Weight |
18# |
20# |
26# |
29# |
72" Rod |
Price (each) |
|
|
|
|
Weight |
21# |
22# |
28# |
31# |
|
|
|
![standard hanger assembly](images/hanger_trussed_steel_250_drawing.gif) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Rods
are 5/8" in diameter. B7 Alloy - all thread. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
STANDARD
HANGER ASSEMBLY
For
PLAIN STEEL track series 4000# |
|
|
|
|
Capacity (lbs.) |
4000 |
No Rod |
Price (each) |
|
H (minimum) |
14-1/2" |
Weight |
56# |
20" Rod |
Price (each) |
|
Weight |
58# |
72" Rod |
Price (each) |
|
Weight |
61# |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
![standard hanger assembly](images/hanger_plain_steel_4000_drawing.gif) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Rods
are 3/4" in diameter. B7 Alloy - all thread. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
![](images/price_click_yellow.gif) |
|
Order
Online, by Phone, or by E-Mail |
|
|
|
~ Add
items to your online shopping cart ~
Click the Price of the item you wish to
purchase. |
|
|
|
|
|
|
|
|
|
Capacity (lbs.) |
4000 |
No Rod |
Price (each) |
|
H (minimum) |
11-1/2" |
Weight |
56# |
20" Rod |
Price (each) |
|
Weight |
58# |
72" Rod |
Price (each) |
|
Weight |
61# |
|
|
STANDARD
HANGER ASSEMBLY
For
TRUSSED STEEL track series 4000# |
|
|
|
|
|
|
|
|
|
|
![standard hanger assembly](images/hanger_trussed_steel_4000_drawing.gif) |
|
|
|
|
|
|
|
|
Rods
are 3/4" in diameter. B7 Alloy - all thread. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
STANDARD
HANGER ASSEMBLY
For
ALUMINUM track series 250# - 2000# |
|
|
Capacity (lbs.) |
250 |
500 |
1000 |
2000 |
No Rod |
Price (each) |
|
|
|
|
H (minimum) |
6-1/4" |
6-1/4" |
7" |
7" |
Weight |
17# |
18# |
24# |
25# |
20" Rod |
Price (each) |
|
|
|
|
Weight |
18# |
20# |
26# |
29# |
72" Rod |
Price (each) |
|
|
|
|
Weight |
21# |
22# |
28# |
31# |
|
|
|
|
|
|
|
|
![](images/hanger_aluminum_250_drawing.gif) |
|
|
|
|
|
|
|
|
|
|
![](images/price_click_yellow.gif) |
|
Order
Online, by Phone, or by E-Mail |
|
|
|
~ Add
items to your online shopping cart ~
Click the Price of the item you wish to
purchase. |
|
|
PRICING
- TOUCH-UP PAINT |
|
|
|
|
|
![touch up paint](images/spray_can_drawing.gif) |
|
MODEL NO. |
COLOR |
PRICE |
SP.12.OZ YEL |
YELLOW |
|
YEL.GALLON |
YELLOW |
|
SP.12.OZ BLU |
BLUE |
|
BLUE.GALLON |
BLUE |
|
|
|
|
|
|
Available as
Quick Ship. |
|
|
|
|
|
|
|
|
Price
per spray can/gallon. There is an additional hazardous material
handling charge by UPS per box for paint. Can ship UPS Air except
to Canada (use FedEx). |
|
|
|
|
|
PRICING
- TRACDOM |
|
|
|
Cover
for ends of rail sections
for steel bridges and runways
(yellow). |
|
CAP. (lbs.) |
250 |
500 |
1000 |
2000 |
4000 |
PRICE |
|
|
|
|
|
YELLOW |
0215.Y |
0515.Y |
S1015.Y |
S2015.Y |
S2015.Y |
WEIGHT |
1# |
1# |
1# |
1# |
1# |
|
|
|
Available
as Quick Ship. |
|
|
|
|
Monorails-Enclosed Track
Design, Enclosed Track, Trolley, Festoon, Monorails, Overhead Conveyors,
and Monorail from your
source for material handling equipment. |
Back to Product Category
|