Back to Product Category
 |
|
|
|
|
|
 |
|
|
EW
Series Balancers have cast aluminum case and the ratchet system spring adjustment..
The cable is affixed with the "Plug-Type" cable set |
|
|
|
|
|
|
|
|
|
 |
|
Ratchet System
Spring Adjust
Insert Allen wrench and turn
clockwise to increase tension
and counter-clockwise to
decrease tension |
|
|
|
|
|
Front
View |
|
|
|
Back View |
|
|
|
|
|
|
|
EW
Series Balancers are available in an unpainted version. To order, add "NP"
at the end of the standard
"EW" part number. |
|
|
 |
|
Order
Online, by Phone, or by E-Mail |
|
|
|
~ Add
items to your online shopping cart ~
Click the Model No. of the item you wish
to purchase. |
|
|
|
PRICES |
Model
No. |
Max.
Capacity
(lb) |
Cable
Travel (ft) |
Cable
Dia (in) |
Wt
(lb) |
A
(in) |
B
(in) |
C
(in) |
D
(in) |
E
(in) |
Prices |
| EW-3 |
2.2 to 6.6 |
4.27 |
0.12 |
3.1 |
5.8 |
2.7 |
0.79 |
.55 |
11.4 to 62.6 |
$315 |
| EW-4 |
4.4 to 8.8 |
4.27 |
0.12 |
3.2 |
5.8 |
2.7 |
0.79 |
.55 |
11.4 to 62.6 |
$384 |
| EW-5 |
5.5 to 11.0 |
4.27 |
0.12 |
3.3 |
5.8 |
2.7 |
0.79 |
.55 |
11.4 to 62.6 |
$328 |
|
|
 |
|
|
|
|
|
|
|
|
 |
|
 |
|
|
|
|
|
|
|
|
|
Plug-in
Cable Set |
|
|
|
|
|
|
|
|
|
For
easy cable replacement |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Features
and Benefits |
Advantages
of Using an ENDO Spring Balancer: |
|
|
|
|
|
|
|
ENDO
Spring Balancers are a valuable addition to
your assembly line. They support heavy tools with
cable tension equal to the weight of the suspended
tools, which makes them seem virtually "weightless".
As the tool is repositioned the balancer extends or
retracts the support cable to follow the tool's move-
ments. Constant tension on the cable is accomplished
with a spring motor and a tapered drum. The assembler
has the flexibility to reposition the tool, while experiencing
comfortable operation and less fatigue. Similar to a
Balancer is the Retractor, which does not have a
tapered drum. The tension on the cable increases
as the cable is extended |
•
Suspend tools in assembly lines or other work areas
• Help the assembler with repetitive tasks such as
installing fasteners: screws, nuts, bolts, etc.
• Hold fixtures, tools, welding guns, and similar
equipment
• Improves efficiency and diminishes worker fatigue
• Stabilizes tool positioning and contributes to work
accuracy
• Contributes to a safer working environment
• Keeps fixtures, tools, and welding guns off of the floor
and clean.
• Eliminates the need to separately power the balancer |
|
|
|
|
|
|
|
Application
Guidelines |
•
Size the balancer to carry the total weight to be balanced - tool plus all
accessories - and stroke (maximum to
minimum height) required.
• Size to the upper end of the capacity range of the balancer when
possible.
• Always attach secondary support cable(s) to the eyelet provided for
additional safety.
• Balancers are normally hung vertically and the rope is pulled out
vertically. To prevent the rope from wearing on the
guide, the rope should not be pulled out at an angle to the
balancer body. The balancer can also be mounted
horizontally, however a pulley system must be employed to guide
the rope straight out of the balancer then down to
the tool. Again, care must be taken to prevent the rope from
wearing on the guide. A trolley and rail system can be
used to help the balancer adjust to changing angles.
• If multiple balancers are used in close together, install them at
staggered heights to keep them from hitting each other
• The spring tension is factory preset to the mid-range of the rated
capacity. To adjust the tension turn the worm gear
or spindle clockwise to increase the tension and counterclockwise
to decrease the tension. |
|
Balancers, Balancer, Tool
Balancer, Spring Balancer, Aluminum Balancer, Ratchet System Balancer,
Tool Positioner, Retractor,
Tool Retractors, Spring Tool Balancer, and Torque Reels from your source
for material handling equipment. |
Back to Product Category
|
