Gilmore-Kramer Company Material Handling Equipment - 1-800-544-3137 - Service - Installation - Custom Fabrication
Home Order Search Quote Info About Us My Account Shopping Cart
    Categories
Back to Product Category

CRANE BASKETS

The crane basket, a crane supported man basket, also
referred to as a suspended personnel platform, crane cage
and construction basket, is designed, manufactured and
tested to meet all Federal and OSHA regulations related
to overhead lifting.
Please view the following link of OSHA 29CFR for rules,
regulations and testing requirements on crane baskets Below.
This heavy-duty crane supported basket is designed to meet
the demands of the construction, industrial and mining industry.
Each crane basket includes standard features such as 42”high
meshes sides, self-closing swing-in front door with latch, re-
enforced mesh roof, and 4 hook points on top to attach to
overhead lifting device. Full perimeter safety harness hook-
upallows personnel to be attached almost anywhere inside
the basket. Standard fork pockets allows crane basket to be
moved with a forklift.
The crane supported man basket must be tested each and
every time it is used. Test weight must be rated for 1.25
times the weight of the basket. Our test weight comes with
necessary cabling to secure weight to basket.
• For crane use
• Fork Pockets included for transport
• Self closing swing door
• Hook points for crane and test weight
• Reinforced steel mesh roof
• Tested and certified
MBC-4848
Special size crane baskets are available upon request.
Meets all OSHA requirements when used with a full
safety harness and lanyard.
MBC-9648


Order Online, by Phone, or by E-Mail

~ Add items to your online shopping cart ~
Click the Model No. of the item you wish to purchase.


PRICES FOR MAN BASKETS
MODEL
SIZE W x L x H
CAPACITY
(lbs.)
WEIGHT
(lbs.)
PRICE
36" x 36" x 98"
600
510
$6,426
48" x 48" x 98"
1000
600
$7,026
96" x 48" x 98"
1500
1075
$9,720
OPTIONS
Model No.
DESCRIPTION
Prices
Full Safety Harness W/ Lanyard
$780
*1250 lbs. Test Weight For MBC-3636 and MBC-4848
$2,214
*1875 lbs. Test Weight For MBC-9648
$2,394
Larger Fork Pockets-Specify Size
$599
1” x 1.025” Steel Grate Flooring
$1,320
10’ Long 4-Point Bridle W/Additional 8' Choker Line
$1,764
*NOTE: NEEDS TO BE FILLED WITH CONCRETE BEFORE FIRST USE

BASIC OPERATING INSTRUCTIONS

1. Follow all standard rigging and crane procedures.
2. Use a 4-point bridle capable of supporting, at lease five times the total load applied or transmitted to it.
3. When a wire rope bridle is used, eyes in the bridle must be fabricated with thimbles.
4. Bridle must be attached to the basket with screw pin alloy shackles.

5. Proof test lift must be performed prior to hoisting personnel.
a. Connect test weight weighing at least 125% of rated capacity of basket.
b. Hoist basket off ground for a minimum of five minutes.
c. Lower and inspect basket and rigging for any defects that pose a safety hazard.
d. If any safety hazards are detected, basket must not be used.
6. Trial lift must be performed immediately prior to each shift or after repositioning of equipment.
a. Perform trial lift with test weight attached and no personnel by performing a lift to all intended work postions.
7. Basket is ready to be used.
8. Access gate must be closed and latched while during all lifts.
9. Personnel must keep both feet on floor of basket at all times.
10. All personnel are required to wear a full-body harness with lanyard.
11. For full disclosure see OSHA Regulations 29CFR1926.1431, 29CFR1926.502 & ANSI B56.1

Crane Baskets, Foldable Maintenance Platform, Work Platforms, Forktruck Work Platforms, Forklift Work Platforms,
Maintenance Platform, Fork Truck Work Platforms, Safely Transport Maintenance Personnel, Attaches to Fork Truck,
Web Lanyard with Safety Harness, Stockpicker Work Platforms, Elevate Personnel and Pallets, and Fold Down Work
Platform from your source for material handling equipment.

Back to Product Category
Home - Order - Search - Quote- Info - About Us - My Account - Shopping Cart