CONCRETE RECYCLING CENTER - WS1196


Order Online, by Phone, or by E-Mail

~ Add items to your online shopping cart ~
Click the Model No. of the item you wish to purchase.

Concrete recycling center includes two logos and two 27
gallon liners.
Size: 29" Dia. x 42"H
Unit Weight: 960 lbs.
Unit Capacity: 2 - 27 gallon units
Reinforcing: 1/4” & 3/8" Dia. steel rebar
Material: Reinforced concrete, Plastic
Logo Options: 8" Dia. inkjet recycle arrow logo included.
Custom cast band.
Parts: 1 Plastic 2-hole lid
           1 Concrete base
           1 Security cable assembly
           2 Polyethylene liners
           1 Security Cable
           4 Elevator bolts
Logo Options: 2 Recycle arrows 8" dia
                         1 Recyclables Go Here
                         1 Trash
                         1 Only
Model: WS1196
Price: $1,297.00

Available Colors


Concrete Specification

1.1 SUMMARY
      A. Section includes: Furnish Precast Concrete indicated on drawing orspecified herein.

1.2 REFERENCES

      A. American Society for Testing & Material
           1. ASTM C33 2. ASTM C150 3.ASTM C31

1.5 SUBMITTALS

     A. Submit Product data,shop drawings and samples.
          1. Product Data: Manufacturer’sspecifications and technical data edited specifically for proposed system, including
              the following specific Information:
                  a: Detailed specification of construction fabrication.
                  b: Manufacture’sinstallation instructions
                  c: Maintenanceliterature
                  d: Product warranty
          2. Shop Drawings: Indicate pertinent dimensions, general construction, component connections anchoring methods,
              hardware and installation procedures.
          3. Samples as requested by Architect.

1.6 QUALITY ASSURANCE
      A. Qualifications of Manufacture: Manufacturer to be prequalified by specifier priorto bidding. Failure to comply
           will result in disqualification of bid. Manufacturer to have at least five years’ experience in the manufacture of
           precast concrete field proven for at least five years.

1.10 WARRANTY
        Manufacturer shall submit a written warranty for precast products for the period of two years upon acceptance.

2.1 MANUFACTURERS
      A. Clarification Note: Drawings and installation specification are based on manufactures proprietary literature from
          us. Other manufacturers shall comply with minimum levels of material and detailing indicated on drawings of
          specified herein.
      B. All Precast productsforthis project shall be of one manufacturer.

2.2 MATERIALS
      A. Portland cement: ASTM C150 specificationsfor Portland cement.
      B. Aggregates: All aggregatesto meet ASTM C33 specifications,to be cleaned of foreign matter and properly graded
          to size.
      C. Coloring: Pigments used shall be inorganic,resistantto alkalinity and used as per manufacturers recommendations.

HYPEL™ LLDPE 3170 UV 8 NATURAL ** LINEAR LOW DENSITY POLYETHYLENE, 7.0 MFI

TYPICAL PROPERTY VALUES†

PROPERTY
METHOD
UNIT
VALUE
PHYSICAL
Specific Gravity
ASTM D792
0.935
Metal flow (190°C / 2.16 kg)
ASTM D1238
g/10 min
7
MECHANICAL @ 73°F
Tensile Strength at Yield
ASTM D638
psi
2720 
MPa
18.8
Flexural Modulus - 1% Secant
ASTM D790
psi
100,000
MPa
655
ARM Impact 1/8" (Notched) @-40°C
ASTM D562B
ft-lb/in
79
Hardness (Shore D)
ASTM D785
-
-
THERMAL
264 psi - ASTM, 1.80 MPa-ISO
ASTM D648
°C
35
°F
95
66 psi - ASTM, 0.45 MPa-ISO
ASTM D648
°C
52
°F
125
OTHER
ESCR (100% IGEPAL)
>1000
**When used unmodified for food contact applications, this copolymer will comply with the U.S. Food and Drug
Administration Food Additive Regulation 21 CFR 177.1520(c)3.1a. This section does not include use in packing or
holding food during cooking. This product is limited to use in contact with food only under the conditions of use C
through H described in table 2 of Sec. 176.170(c), and when contacting fatty foods of Types III, IVA, V, VII-A,
and IX described in table 1 of Sec. 176.170(c), the finished articles are to have a volume of at least 18.9 liters (5
gallons). The uses cited are subject to good manufacturing practices and any limitations, which are part of the regu-
lations. The regulations should be consulted for complete details.

†The data listed here fall within the normal range of product properties, but they should not be used to establish speci-
fication limits or used alone as a basis for design. This information is not intended as a warranty of any kind. Buyers
must make their own representative test and assume all risks of use, whether used alone or in combination with other
products. Entec Polymers, LLC assumes no obligation or liability of any advice furnished by it or results obtained with
respect to these products. All warranties expressed or implied including warranties of merchantability for a particular
purpose or use are excluded and disclaimed. Entec Polymers, LLC assumes no liability for use of products in infringe-
ment of any patent. The foregoing limitation of remedy and exclusion of liability is reflected in and is part of the
consideration for the price, at which the products are sold by Entec Polymers, LLC. All data displayed herein has been
obtained via testing of injected molded specimens of natural color. Pigmentation may affect certain properties to various
degrees.
Concrete Recycling Centers, Concrete Trash Receptacles, Concrete Recycling Waste Receptacles, Trash Receptacles, Metal
Trash Receptacles, Steel Trash Receptacles, Weathergard, Polysteel, Streetscape, Aspen Series, and American Series from your
source for material handling equipment.