Back to Product Category
CONCRETE
RECYCLING CENTER - WS1196 |
|
|
 |
|
Order
Online, by Phone, or by E-Mail |
|
|
|
~ Add
items to your online shopping cart ~
Click the Model No. of the item you wish
to purchase. |
|
|
|
|
Concrete
recycling center includes two logos and two 27
gallon liners. |
 |
|
|
|
|
|
|
Size: 29" Dia. x 42"H
Unit Weight: 960 lbs.
Unit Capacity: 2 - 27 gallon units
Reinforcing: 1/4” & 3/8" Dia. steel rebar
Material: Reinforced concrete, Plastic
Logo Options: 8" Dia. inkjet recycle arrow logo included.
Custom cast band.
Parts: 1 Plastic 2-hole lid
1 Concrete
base
1 Security
cable assembly
2 Polyethylene
liners
1 Security
Cable
4 Elevator
bolts
Logo Options: 2 Recycle arrows 8" dia
1 Recyclables Go Here
1
Trash
1
Only |
|
Anchoring: |
|
|
|
Includes
(4) 1/2" threaded inserts on bottom for optional anchoring. |
|
|
|
Model: WS1196
Price: $1,289.20 |
|
|
|
|
|
|
|
|
|
|
|
|
Available Colors |
|
 |
PLASTIC
COLORS FOR TOPS ONLY |
|
|
|
 |
|
 |
|
Concrete
Specification |
|
1.1 SUMMARY
A. Section includes: Furnish Precast
Concrete indicated on drawing or specified herein.
1.2 REFERENCES
A. American Society for Testing &
Material
1. ASTM
C33 2. ASTM C150 3.ASTM C31
1.5 SUBMITTALS
A. Submit Product data,shop drawings and
samples.
1. Product
Data: Manufacturer’s specifications and technical data edited specifically
for proposed system,
including
the following specific Information:
a:
Detailed specification of construction fabrication.
b:
Manufacture’s installation instructions
c:
Maintenance literature
d:
Product warranty
2. Shop Drawings:
Indicate pertinent dimensions, general construction, component connections
anchoring
methods, hardware
and installation procedures.
3. Samples
as requested by Architect.
1.6 QUALITY ASSURANCE
A. Qualifications of Manufacture:
Manufacturer to be prequalified by specifier prior to bidding. Failure
to comply
will result
in disqualification of bid. Manufacturer to have at least five years experience
in the manufacture of
precast concrete
field proven for at least five years.
1.10 WARRANTY
Manufacturer shall submit
a written warranty for precast products for the period of two years upon
acceptance.
2.1 MANUFACTURERS
A. Clarification Note: Drawings and
installation specification are based on manufactures proprietary literature
from us. Other
manufacturers shall comply with minimum levels of material and detailing
indicated on
drawings of
specified herein.
B. All Precast products for this project
shall be of one manufacturer.
2.2 MATERIALS
A. Portland cement: ASTM C150 specifications
for Portland cement.
B. Aggregates: All aggregates to meet
ASTM C33 specifications, to be cleaned of foreign matter and properly
graded to
size.
C. Coloring: Pigments used shall be
inorganic,resistant to alkalinity and used as per manufacturers
recommendations. |
|
HYPEL™
LLDPE 3170 UV 8 NATURAL ** LINEAR LOW DENSITY POLYETHYLENE, 7.0 MFI |
|
TYPICAL
PROPERTY VALUES† |
|
PROPERTY |
METHOD |
UNIT |
VALUE |
| PHYSICAL |
| Specific
Gravity |
ASTM
D792 |
|
0.935 |
| Metal
flow (190°C / 2.16 kg) |
ASTM
D1238 |
g/10
min |
7 |
| MECHANICAL
@ 73°F |
| Tensile
Strength at Yield |
ASTM
D638 |
psi |
2720 |
MPa |
18.8 |
| Flexural
Modulus - 1% Secant |
ASTM
D790 |
psi |
100,000 |
MPa |
655 |
| ARM
Impact 1/8" (Notched) @-40°C |
ASTM
D562B |
ft-lb/in |
79 |
| Hardness
(Shore D) |
ASTM
D785 |
- |
- |
| THERMAL |
| 264
psi - ASTM, 1.80 MPa-ISO |
ASTM
D648 |
°C |
35 |
°F |
95 |
| 66
psi - ASTM, 0.45 MPa-ISO |
ASTM
D648 |
°C |
52 |
°F |
125 |
| OTHER |
| ESCR
(100% IGEPAL) |
|
|
>1000 |
|
|
**When
used unmodified for food contact applications, this copolymer will comply
with the U.S. Food and Drug
Administration Food Additive Regulation 21 CFR 177.1520(c)3.1a. This section
does not include use in packing or
holding food during cooking. This product is limited to use in contact with
food only under the conditions of use C
through H described in table 2 of Sec. 176.170(c), and when contacting fatty
foods of Types III, IVA, V, VII-A,
and IX described in table 1 of Sec. 176.170(c), the finished articles are
to have a volume of at least 18.9 liters (5
gallons). The uses cited are subject to good manufacturing practices and
any limitations, which are part of the regu-
lations. The regulations should be consulted for complete details.
†The data listed here fall within the normal range of product properties,
but they should not be used to establish speci-
fication limits or used alone as a basis for design. This information is
not intended as a warranty of any kind. Buyers
must make their own representative test and assume all risks of use, whether
used alone or in combination with other
products. Entec Polymers, LLC assumes no obligation or liability of any
advice furnished by it or results obtained with
respect to these products. All warranties expressed or implied including
warranties of merchantability for a particular
purpose or use are excluded and disclaimed. Entec Polymers, LLC assumes
no liability for use of products in infringe-
ment of any patent. The foregoing limitation of remedy and exclusion of
liability is reflected in and is part of the
consideration for the price, at which the products are sold by Entec Polymers,
LLC. All data displayed herein has been
obtained via testing of injected molded specimens of natural color. Pigmentation
may affect certain properties to various
degrees. |
|
Concrete Recycling Centers,
Concrete Trash Receptacles, Concrete Recycling Waste Receptacles, Trash
Receptacles, Metal
Trash Receptacles, Steel Trash Receptacles, Weathergard, Polysteel, Streetscape,
Aspen Series, and American Series from
your source for material handling equipment. |
Back to Product Category
|
