Return
to All Kee Klamp Products
|
TYPE
25 - Three Socket Tee
|
|
|
|
![Type 25 Three Socket Tee is most commonly used as the 90 degree joint between the top rail and an intermediate upright on guardrailing.](images/kk_25.jpg) |
|
|
Most commonly used
as the 90º joint between the top rail and an intermediate
upright on guardrailing. As there are two socket set screws in the sleeve,
this Kee
Klamp fitting can be used where a join is required in the horizontal tube.
As an
alternative, it is possible to use a Type 10 fitting in its vertical position
in place of
the Type 25, using the latter only where a join in the pipe occurs. |
|
|
|
|
|
|
|
PIPE
SIZE NOTE: Pipe sizes are specified
by the inside diameter. Refer to
diagrams below the price chart to verify your outside diameter. |
|
|
|
|
|
|
|
|
![](images/model_no_click_yellow.gif) |
|
Order
Online, by Phone or by E-Mail |
|
|
|
~ Add
items to your online shopping cart ~
Click the Model No. of the item you wish
to purchase. |
|
|
|
Model No. |
Pipe Size |
Inches |
Lbs |
Price |
A |
D |
E |
Three Socket Tee |
|
1/2" |
1.38 |
2.68 |
0.4 |
$27.14 |
|
3/4" |
1.61 |
3.23 |
0.82 |
$26.96 |
|
1" |
1.81 |
3.62 |
1.08 |
$25.44 |
|
1
1/4" |
2.36 |
4.72 |
1.87 |
$39.98 |
|
1
1/2" |
2.68 |
5.35 |
2.4 |
$44.10 |
|
2" |
3.35 |
6.61 |
3.84 |
$65.08 |
|
|
|
|
|
|
![As there are two socket set screws in the sleeve, this Type 25 Three Socket Tee fitting can be used where a join is require in the horizontal tube.](images/dwg_kk_25.jpg) |
|
|
|
|
|
Many
other colors available. Prices are upon request. |
|
|
|
|
![Kee Klamp fittings are available in many different colors; prices are upon request.](images/colors.jpg) |
|
|
Kee Clamp, Kee Clamps, Kee
Klamp, Kee Klamps, Key Clamp, Pipe Hand Rail, Pipe Handrail, Pipe Rail,
Pipe Rail Fittings, Pipe
Railing, Pipe Rails, and Slip on Pipe Fittings from your complete source
for material handling equipment. |
Return
to All Kee Klamp Products
|