Back to Product Category
ATV STEEL STORAGE SHELTERS
CLASSIC SERIES
|
|
|
|
The carport package provides
an
economical canopy-type shelter
for smoking shelters, autos, boats,
RV's and other outdoor equipment
the consumer needs to store under
cover and out of direct exposure
to the elements. Sheet metal avail-
able in white only. The following
summarizes features of our original
standard Classic Series carports
and shelters. |
|
|
|
|
|
Carport
Assembly Instructions |
|
|
|
Shown
Standard |
|
|
|
|
|
|
|
|
|
|
|
FEATURES: |
|
|
|
|
|
|
|
Features horizontal
roof panels with a "rounded" look
at the eaves.
Primary framing utilizes 2" x 3" heavy-gauge, galvanized
and polymer-coated steel tubing with increased rust resistance.
Minimum frame length begins at 18' and, with 4.5' on-
center truss spacing, can be extended in 4.5' increments.
Roof coverage length will be 2' longer (1' on each end)
than the frame length. |
|
Standard carport canopy package includes 29-gauge
premium painted steel sheet metal panels and painted
self-drilling screws for horizontal sheet metal appli-
cation. White vinyl "push-on" edge trim is also
included.
Standard carport kits provide at least 12"-15" of
coverage down the eave side of the frame and
varies depending on the width of the carport. |
|
|
|
|
|
|
|
|
|
|
|
|
|
White
is the standard package sheet metal color. |
|
|
|
STANDARD
PACKAGE CONTENTS |
|
|
|
|
|
Carport
frame and sheet metal packages are bundled
together on 1-3 pallets depending on the size of the
structure. A single pallet is typically 120"W x 40"D x
16"-24"H and weighs approximately 1,000 lbs. or less.
Multiple pallets are labeled accordingly. |
|
All framing components and self-drilling screws
required to construct the basic frame.
Ground stake anchors necessary to anchor the
structure to level ground (Concrete anchors not
included).
Corrugated 29-gauge sheet metal and gasketed self-
drilling screws needed for installation of horizontal or
vertical roofing panels.
Butyl caulk tape and trim package.
Comprehensive step-by-step assembly instructions. |
|
|
|
Complete
carport pallets - including both frame components and sheet metal panels
- are shipped freight prepaid. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
For Yard
Storage |
|
For Boats |
|
ENGINEERED
EASY...WITH STEEL |
|
|
|
|
|
|
|
|
|
|
|
|
|
"Slip-Fit" design dramatically simplifies the installation process.
This patented "swaged" manufacturing technique
combines ease
of assembly with the strength and durability of steel.
Our use of a
mandrel bending system results in a cleaner look and a
stronger
bend transition. |
|
|
|
|
|
|
|
|
|
|
|
|
We use heavy-duty 2" x 3" rectangular and 2" x 2" square
gal-
vanized steel tubing with guaranteed minimum yield strength
of
50,000 PSI. Triple layer protection provides a smooth, shiny
solution that resists rust longer than any pre-galvanized or
elec-
troplated tubing product - in addition to termite and rot resistance. |
|
|
|
|
|
|
|
|
|
|
|
ENGINEERING
Roof pitch is 3:12
for all structures.
Ground Snow & Wind Loads. |
|
|
|
|
|
|
|
|
|
|
|
|
Ground
Snow |
|
30
- 70 PSF* |
|
|
|
|
|
|
|
|
|
|
|
|
|
Wind |
|
70
- 120 MPH* |
|
|
|
|
|
|
|
|
|
|
|
Consult your local building permit department for local loading requirements.
Stamped engineering drawings are available for an additional charge. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
PRICES |
|
Complete
Package Includes: Frame, Framing Screws, Anchors, Sheet Metal, Sheet
Metal Screws and Trim. |
|
Model No. |
W' x L' x H' |
Weight (lbs) |
Price |
CM007100060S |
7' x 10' x 6' |
313 |
$1,597.90 |
CM007150060S |
7' x 15' x 6' |
415 |
$2,342.60 |
CM012100060S |
12' x 10' x 6' |
387 |
$2,081.30 |
CM012150060S |
12' x 15' x 6' |
510 |
$2,705.60 |
|
|
BASIC
CARPORT FRAME |
|
|
|
Steel Shelters, Storage Shelters,
Boat, Vehicle, Smoking Shelter, Equipment Shelter, Transit Shelter, Covered
Walkway,
Covered Sidewalk, ATV, RV, Camper, Outdoor Buildings, Metal Buildings,
Garages and Carports from your source for
material handling. |
Back to Product Category
|