Gilmore-Kramer Company Material Handling Equipment - 1-800-544-3137 - Service - Installation - Custom Fabrication
Home Order Search Quote Info About Us My Account Shopping Cart
    Categories
Back to Product Category

512M MULTI-PURPOSE LIFTS

512m multi-purpose lifts erecting lifts tilt back lifts
ERECTING THE 512M MODEL
TILT BACK POSITION

The Model 512M set up by
one man to operate as a 12 ft. lift.

Four non-marking casters swivel to
permit movement in any direction.
Each caster is equipped with simple
locking devices. The two 10" x 2.75
semi-pneumatic tires touch the floor
only when tipped back. In this position,
the lift is quickly moved over soft and
uneven ground.

In addition to heavy concentrated
loads, the Model 512M Lift can
also lift into place long fabricated
duct work, electrical bus duct, I-
beams, overhead doors, heavy
pipe, etc. On extra long pipe and
duct sections, two or more units
are employed.

The MODEL 512M Lift will elevate 500 lbs. up to a maximum height of 12 ft.
high. It can also be converted to a 5, 8, or 9 ft. lift by simply removing or
replacing the 3 and 4 ft. slip-joint post section.
As a 5 ft. lift, this model will pass through a doorway (27" wide x 6-6"' high).
Post sections shown on the bottom of this page are used for intermediate heights.
The platform of the MODEL 512M is 20" wide by 24" long. Load center is
based at12" from post. Capacity is decreased on loads extending over 12"
center distance. Loads over 500 lbs. can be lifted with two units.
When the MODEL 512M is assembled as a 5 ft. lift, it can be tipped back on
the corrugated handle and rolled into a truck or Van.
WARNING: DO NOT USE EXTRA POSTS TO INCREASE THE
DESIGN MAXIMUM HEIGHT OF 12 FEET ON THE 512M LIFT.

work platforms
The 512M Lift becomes and excel-
lent elevator when attached to safe
way scaffolding. Corner brackets
shown below provide solid support.
Specifications
CAPACITY - 500 lbs.
Lifting Height -12'
Overall Height - 13' 2"
   can be used as a 5 ft lift.
Base Length - 51"
   (with 10" wheels) - 53 3/4"
Base Width - 27"
Platform Length - 24"
Platform Width - 20"

L7HE - See Platform Height
Extension shown below for
working above the top pulley.
Extreme top of pulley is 14" above
platform when fully raised.
512M COMES COMPLETE WITH:
maintenance lifts
PART
DESCRIPTION
L-1
Tongue 18" (w/bolt & nut)
L2-3
3' Post
L2-4
4' Post
L2-8
28" Winch post
L3
Winch mounting tongue
L4-4M
Winch brace
L9-9
34" Post complete w/pulley
L90
Top pully only complete
3L10
Swivel caster
L11-712
Winch cable
L11-22
Gear & bearing grease
L11-52N
Electric drill adapter
L60
Wheel & axle assembly
L110-12
Winch (w/cable)
L512MB
Base (Less casters & wheels)
L512MP
Platform (complete w/rollers)
ATTACHMENTS AND PRICES
elevating work platform

Order Online, by Phone, or by E-Mail

~ Add items to your online shopping cart ~
Click the Model No. of the item you wish to purchase.


Model No.
Description
Price
Lift Cap. 500# w/3" Casters
$3,881.00
Lift Cap. 500# w/5" Casters
$4,013.00
ATTACHMENTS AND REPLACEMENT PARTS
2' Post
$144.00
Platform Height Extension 24" High (Use one pair on each lift)
$432.00
Wheel and Axle Assembly
$347.10
5" Swivel Casters
$91.90
Platform Cover Plate - fits all models - use in lifting small items
$256.50
Tongue (w/Bolt and Nut)
$74.60
3' Post
$187.70
4' Post
$218.60
28" Winch Post w/Mounting Bracket
$177.40
Winch Mounting Tongue
$159.40
Winch Brace
$55.90
34" Post Complete w/Pulley
$398.60
Top pulley (Complete)
$180.00
3" Swivel Caster
$73.30
Winch Cable
$132.40
Gear and Bearing Grease
$23.10
Electric Drill Adapter
$43.70
Winch (w/Cable)
$1,164.90
Base (Less Casters & Wheels)
$720.00
Platform (Complete w/Rollers)
$1,080.00
512M Multi-Purpose Lifts, Elevating Work Platform, Superlift, Installation Lifts, Maintenance Lifts, Material Lifts, Portable Lifts,
Super Hoist, and Vermette Lifts from your source for material handling equipment.

Back to Product Category
Home - Order - Search - Quote- Info - About Us - My Account - Shopping Cart