Back to Product Category
|
|
|
To
secure drum in Adjusto-Karrier, back-off the
adjusting screws with the removable crank furnished.
Center rods are threaded adjusting screw with additional
guide rods on each side. Hoist up over drum and lower
so grip pads aline with center of load. Turn adjusting
screws to tighten grip pads and hold drum approximately
centered in holder frame. Turn adjusting crank to “feel”
resistance of pressure being applied and prevent denting
or crushing container |
|
When handling
successive drums of the same
diameter, grip and release involves just one
adjusting screw. The other one need not be
readjusted until a different diameter is
encountered. Then, readjust to center new drum. |
|
|
|
 |
|
|
|
|
|
MODEL
186 |
|
|
| HANDLES |
15 to 23" (38.1-58.4 cm)
Drum Diameter |
| DIMENSION
A |
34-3/8"
(87.3 cm) |
| DIMENSION
B |
48-1/8"
(122.2 cm) |
| DIMENSION
C |
28-3/4"
(73 cm) |
| DIMENSION
D |
Drum Diameter
+20" (50.8 cm) |
DIMENSION
E |
24-1/2"
(62.2 cm) |
|
|
|
Also
available 186M Adjusto-Karrier in Spark Resistant Parts.
Prices are upon request. |
|
|
|
|
|
|
|
|
 |
|
Order
Online, by Phone, or by E-Mail |
|
|
|
~ Add
items to your online shopping cart ~
Click the Model No. of the item you wish
to purchase. |
|
|
Model
186 & Options Prices |
Model
No. |
Description |
Price |
|
15"
to 23" Drum Diameter |
$1,843.00 |
MODEL
186M |
MODEL
186 With Spark Resistant Parts |
Contact
Us |
Options |
|
Hand
Crank |
$132.70 |
|
16"
Hand Wheel |
$222.70 |
|
9"
Hand Crank with 3/4" Socket Tube |
$96.00 |
|
MORStop
Tilt-Brake Factory installed on new unit |
$269.00 |
|
KIT,
MORStop Tilt-Brake, Field Install |
$269.00 |
|
|
Transport Loaded Containers,
Adjusto-Karriers, Drum Grabs, Drum Handlers, Drum Handling, Drum Lifters,
Barrel Handling, Drum Carriers, Drum Dumpers, Drum Handling Equipment,
Drum Lift, Drum Lifting Equipment, and
Drum Stackers from your source for material handling equipment. |
Back to Product Category
|
Adjust for 15”
to 23” (38.1 to 58.4 cm) Diameter
