Complete the job by specifying coved risers. Allows easier cleaning, is more attractive, reduces fitting procedures at rear of steps. 5/8" toe fits flush on top of treads. Can be trimmed to fit in height and length; cuts labor costs. Install with #400 Neoprene Contact Cement or #560 Rubber Flooring Adhesive.
SPECIFICATIONS: Furnish and install #605CR Molded Cove Stair Riser, .100" thick, 7" high, with 5/8" toe; standard lengths as needed: 36", 42", 48", 54", 60" or 72"; Select Available Colors.
See Below for Color Chart and Adhesives
Order Online
Click the button of the item you wish to purchase.
We carry a complete line of adhesives and nose caulks for installation of our stair treads, risers and tile. Rubber and vinyl stair treads and cove risers can be installed with our No. RCM510 Acrylic Adhesive, or No. 300 Water-Based Contact Adhesive (No. 630D Rubber Outdoor Treads must be installed with our No. 775 Epoxy Adhesive). Landing tiles can be installed with our RCM510 Acrylic Adhesive or No. 775 Epoxy Adhesive
Broken Carton Charge $5.00. Coverage: 75 square feet per gallon
#775AB Epoxy Flooring Adhesive - Environmentally Friendly The only recommended adhesive for use with Disc-O-Tile. May be used with other rubber stair treads, tile and flooring. Because of flame spread properties, other adhesives will not bond Disc-O-Tile to the floor. A two-part solvent-free adhesive; contains 1 can Part A 1 can Part B, and a stirring paddle. Covers approximately 150 square feet per unit.
#560 Rubber Flooring Adhesive - Environmentally Friendly For installing Rubber Floor Tiles or Rolls over suitable on-grade dry concrete floors, suspended concrete floors, or suspended wood floors. May also be used with sanded back molded rubber stair treads. Not recommended where excessive moisture exists; Non-Carcinogenic; Non-Toxic; safe for the environment and freeze thaw stable. See label for complete instructions. Ready to trowel in 1 gallon or 4 gallon cans. Covers 150 square feet per gallon.
