Ideal
for manufacturing and commercial areas where static electricity
can
pose a problem. A carbon-impregnated polyester scrim embedded
in
the surface ensures speedy dissipation of static electricity,
and a Nitricell®
sponge base ensures employee comfort and productivity.
•
2X the resilience and 3X the life of typical sponges
• Lay-flat design and up to 20% more standing area than
look-a likes
• Attached grounding snap
Specs:
Uses
Dry areas at risk from ESD static electricity
Compound
1/8"-thick vinyl surface bonded to a 3/8"-thick Nitricell®
sponge base
Edges
Safety beveled
Surface
Resistivity EOS/ESD S7.1 RTT - 1 x 107 to 5 x 108
ohm
RTG
- 1 x 107 to 5 x 108 ohm
Coefficient
of Friction .87 Dry, .61 Wet per ASTM F1677
Flammability
(Surface) "A" Rating per MVSS 302
Flammability
(Sponge) Burned for <5 seconds per MIL-P12420C
Tabor
Abrasion < 1% lost @ 1,000 cycles per Fed Std. 191
Color
Gray (GY)
Grounding
snap is attached to
lower left hand corner of each mat.
See bottom of page for accessories.
Order Online
Click the button of the item you wish to purchase.
Grounding
snap is attached to lower left hand corner of each mat. See
bottom of page for accessories.
ACCESSORIES
15’
Ground Cord No. 793.15Cord
Use
the cord to connect all ESD tabletop and floors mats to a building
ground. The solderless terminal can be connected to an electrical
outlet
using the screw in the outlet cover.
Specs:
Uses
To connect all ESD mats to a building ground
Construction
Molded-in male snap fastener on one end and solderless
terminal on the other.
Resistivity
Integral one megohm resistor (1 x 106 ohm)
Snap
Conforms to 10mm snaps
Order Online
Click the button of the item you wish to purchase.
Made
for workers wearing insulative shoes, the Heel Grounder
allows static electricity to pass from the worker to the ESD
matting
or flooring One size "fits all" and the Velcro®
loop allows for easy
attachment. Allow the fabric strip to touch the workers skin
for best
performance.
Specs:
Uses
To allow shoes to conduct static discharge
Construction
Two-layer laminated rubber sole with Velcro® loop
attachment
Resistivity
One megohm resistor (1 x 106 ohm)
Width
1.5"
Thickness
0.060"
Order Online
Click the button of the item you wish to purchase.
