KEE
LITE ALUMINUM FITTINGS
|
|
|
|
|
HANDRAILS
• LIGHTING GRIDS • STORE FIXTURES • PLAYGROUNDS •
GUARD RAILS • SET DESIGN & PROPS |
|
|
|
|
 |
|
|
 |
|
• Aesthetic look and design |
|
|
|
•
Light weight |
|
|
|
• Corrosion resistant |
|
|
|
•
Large set screws resist thread stripping |
|
|
|
• Low
long term maintenance |
|
|
|
• Available
for Schedule 40 Pipe Sizes 1"-2" |
|
|
|
• Recessed Set Screws for a Smooth Look |
|
|
|
• Cost
Effective Alternative to Welding |
|
|
|
WATER
TREATMENT FACILITIES • CORROSIVE ENVIRONMENTS • INDUSTRIAL/COMMERCIAL
RETAIL & RESTAURANT DESIGN • MUNICIPAL • INSTITUTIONAL |
|
|
KEE
LITE fittings are made from high-grade Aluminum
Silicon Magnesium alloy to provide you with a lightweight,
corrosion resistant and strong alternative for fabrication of pipe structures.
Kee Lite fittings offer you flexibility, to be
used for a variety of applications from contemporary to industrial; your
imagination is the only limitation you have. |
|
Because
Kee Lite fittings can be easily installed with a hex key and pipe cutters,
there is no need to weld, thread or
drill, saving you both time and money. Kee Lite is securely locked into
place using recessed setscrews that provide a
smooth look to your rail system. |
|
PIPE
SIZE NOTE: Pipe sizes are specified
by the inside diameter. Refer to diagrams below the price chart to
verify your outside diameter. |
|
Click
on button or text to jump to the product you desire. |
Click the button of the item you wish to purchase. Contact us for special lengths
Type
L10 - Single Socket Tee |
Back
to Top |
 |
 |
|
|
|
|
|
Designed
to give a 90° butt joint between two pipes.
Frequently used for the joint between end uprights
and the middle rail where the site is straight and level. Also used for
base ties on racking. This fitting cannot
be used where the pipe through the sleeve 'A' is
required to be joined within the fitting. |
|
|
|
|
|
| Model No. |
Pipe
Ref. |
Inches |
Weight |
Price |
| A |
B |
C |
D |
| L10-6 |
6 |
2.05 |
1.67 |
2.2 |
0.29 lbs |
$20.53 |
| L10-7 |
7 |
2.56 |
2.09 |
2.52 |
0.44 lbs |
$25.87 |
| L10-8 |
8 |
2.91 |
2.36 |
2.76 |
0.66 lbs |
$33.27 |
| L10-9 |
9 |
3.54 |
2.91 |
3.23 |
1.06 lbs |
$66.13 |
|
Type
L14 - Straight Coupling |
Back
to Top |
 |
 |
|
|
|
|
|
Designed
to give an in-line joint between tubes of
the same size. Frequently used to allow full pipes to
be used in railing applications.
Note: It is
not advisable to join the upper and lower
rails of a railing within the same bay. |
|
|
|
|
|
|
|
|
|
|
|
| Model No. |
Pipe
Ref. |
Inches |
Weight |
Price |
| A |
B |
C |
D |
| L14-6 |
6 |
1.97 |
3.94 |
1.67 |
0.40 lbs |
$23.21 |
| L14-7 |
7 |
2.32 |
5.12 |
2.09 |
0.73 lbs |
$27.88 |
| L14-8 |
8 |
2.56 |
5.83 |
2.36 |
0.82 lbs |
$35.51 |
|
Type
L15 - 90 degree Elbow |
Back
to Top |
 |
 |
|
|
|
|
|
A
90° elbow joint, most frequently used as an end
joint for the top rail of safety railings on a level site. |
|
|
|
|
|
| Model No. |
Pipe
Ref. |
Inches |
Weight |
Price |
| A |
B |
C |
D |
| L15-6 |
6 |
2.05 |
1.67 |
2.2 |
0.31 lbs |
$26.64 |
| L15-7 |
7 |
2.56 |
2.09 |
2.32 |
0.62 lbs |
$32.54 |
| L15-8 |
8 |
2.91 |
2.36 |
2.56 |
0.88 lbs |
$43.88 |
| L15-9 |
9 |
3.54 |
2.91 |
3.07 |
1.46 lbs |
$56.01 |
|
Type
L19 - Adjustable Side Outlet Tee |
Back
to Top |
 |
 |
|
|
|
|
|
Used
to form variable angle joints between 60° and
200°.
Note: Type L19 fittings are normally used in pairs,
and are sold, priced, and weighed as such. |
|
|
|
|
|
|
|
|
|
|
|
| Model No. |
Pipe
Ref. |
Inches |
Weight |
Price/Pair |
| A |
B |
C |
| L19-6 |
6 |
1.67 |
2.95 |
0.79 lbs |
$56.43 |
| L19-7 |
7 |
2.09 |
3.54 |
1.28 lbs |
$76.91 |
| L19-8 |
8 |
2.36 |
3.54 |
1.46 lbs |
$79.85 |
|
Type
L20 - Side Outlet Elbow |
Back
to Top |
 |
 |
|
|
|
|
|
A
90° corner joint most frequently used for the top
rail of safety railing. It can also be considered for
the corner joint of benches, work tables, and other
rectangular structures. |
|
|
|
|
|
|
|
|
|
|
|
| Model No. |
Pipe
Ref. |
Inches |
Weight |
Price |
| A |
B |
C |
D |
| L20-6 |
6 |
2.05 |
1.67 |
1.97 |
0.42 lbs |
$33.50 |
| L20-7 |
7 |
2.56 |
2.09 |
2.32 |
0.77 lbs |
$49.04 |
| L20-8 |
8 |
2.91 |
2.36 |
2.56 |
1.1 lbs |
$52.30 |
|
Type
L21 - Side Outlet Tee |
Back
to Top |
 |
 |
|
|
|
|
|
Most
frequently paired with Type L20 to give a 90° corner joint for the middle
rail of safety-railing and
other rectangular structures. The upright passes
through the fitting. |
|
|
|
|
|
|
|
|
|
|
|
| Model No. |
Pipe
Ref. |
Inches |
Weight |
Price |
| A |
B |
C |
D |
| L21-6 |
6 |
2.05 |
1.67 |
2.2 |
0.35 lbs |
$30.89 |
| L21-7 |
7 |
2.56 |
2.09 |
2.52 |
0.66 lbs |
$41.90 |
| L21-8 |
8 |
2.91 |
2.36 |
2.76 |
0.95 lbs |
$52.81 |
|
Type
L25 - Three Socket Tee |
Back
to Top |
 |
|
 |
|
|
|
|
|
|
Most
commonly used as the 90° joint between the
top rail and an intermediate upright on safety
railing. As there are two socket set screws in the
sleeve, this Kee Lite fitting can be used where a join
is required in the horizontal pipe. The Type L10
fitting can be used as an alternative when a join in the pipe is not required. |
|
|
|
|
|
|
|
|
|
|
|
|
|
| Model No. |
Pipe
Ref. |
Inches |
Weight |
Price |
| A |
B |
C |
D |
E |
| L25-6 |
6 |
2.05 |
1.67 |
1.97 |
4.09 |
0.46 lbs |
$31.17 |
| L25-7 |
7 |
2.56 |
2.09 |
2.32 |
5.12 |
0.77 lbs |
$38.91 |
| L25-8 |
8 |
2.91 |
2.36 |
2.56 |
5.83 |
1.12 lbs |
$48.90 |
| L25-9 |
9 |
3.54 |
2.91 |
3.07 |
7.09 |
1.81 lbs |
$70.54 |
|
Click the button of the item you wish to purchase. Contact us for special lengths
Type
L26 - Two Socket Cross |
Back
to Top |
 |
 |
|
|
|
|
|
Usually
paired with Type L25 to give a 90° joint
between the middle rail and an intermediate upright
on safety railing. The upright passes through the
fitting. |
|
|
|
|
|
|
|
|
|
|
|
| Model No. |
Pipe
Ref. |
Inches |
Weight |
Price |
| A |
B |
C |
D |
| L26-6 |
6 |
1.67 |
2.2 |
4.09 |
0.37 lbs |
$36.60 |
| L26-7 |
7 |
2.09 |
2.52 |
5.12 |
0.62 lbs |
$43.69 |
| L26-8 |
8 |
2.36 |
2.76 |
5.83 |
0.99 lbs |
$52.65 |
| L26-9 |
9 |
2.91 |
3.23 |
7.09 |
1.46 lbs |
$68.23 |
|
Type
L29 - 30° to 60° Single Socket Tee |
Back
to Top |
 |
 |
|
|
|
|
|
This
adjustable fitting is most frequently used for
struts and braces. It can be used at any selected
angle between 30° and 60°. Suitable for connecting
an angled staircase rail to a vertical upright. |
|
|
|
|
|
|
|
|
|
|
|
| Model No. |
Pipe
Ref. |
Inches |
Weight |
Price |
| A |
B |
C |
D |
E |
| L29-7 |
7 |
3.23 |
3.74 |
1.06 |
2.07 |
0.70 lbs |
$43.69 |
| L29-8 |
8 |
3.66 |
4.25 |
1.18 |
2.32 |
0.90 lbs |
$55.19 |
|
Type
L30 - 30° to 45° Adjustable Cross |
Back
to Top |
 |
 |
|
|
|
|
|
This
adjustable fitting can be used for railing on staircases between the mid-rail
and intermediate
upright which is required to remain vertical. It can be
used at any selected angle between 30° and 45°. |
|
|
|
|
|
|
|
|
|
|
|
| Model No. |
Pipe
Ref. |
Inches |
Weight |
Price |
| A |
B |
C |
D |
| L30-7 |
7 |
8.46 |
2.07 |
2.13 |
1.15 lbs |
$61.24 |
| L30-8 |
8 |
9.65 |
2.34 |
2.36 |
1.52 lbs |
$69.40 |
|
Type
L35 - Three Socket Cross |
Back
to Top |
 |
 |
|
|
|
|
|
Most
frequently used to tie uprights with horizontal pipes in three directions,
all at 90° to the upright. The upright passes through the fitting. |
|
|
|
|
|
|
|
|
|
|
|
| Model No. |
Pipe
Ref. |
Inches |
Weight |
Price |
| A |
B |
C |
D |
E |
| L35-6 |
6 |
1.97 |
2.2 |
4.09 |
2.05 |
0.68 lbs |
$47.92 |
|
|
Back
to Top |
 |
 |
|
|
|
|
|
Designed
to give a 90° offset crossover joint.
Frequently used on safety railing, where, to reduce
cost by minimizing the pipe cuts, a continuous
horizontal rail is used. Pipe cannot be joined within
this Kee Lite fitting. It may be also used to give
intermediate levels on racks. |
|
|
|
|
|
|
|
|
|
|
|
| Model No. |
Pipe
Ref. |
Inches |
Weight |
Price |
| A |
B |
C |
| L45-6 |
6 |
1.73 |
1.57 |
0.26 lbs |
$37.21 |
| L45-7 |
7 |
2.13 |
1.97 |
0.68 lbs |
$45.42 |
| L45-8 |
8 |
2.4 |
2.2 |
0.77 lbs |
$52.63 |
|
Click the button of the item you wish to purchase. Contact us for special lengths
Type
L46 - Combination Socket Tee and Crossover |
Back
to Top |
 |
 |
|
|
|
|
|
Used
on racking to join horizontal carrying rails to
the upright, leaving the socket to take a horizontal
tie across the section. For shelved racking, it is usual
to have the horizontal pipe outside the upright. On
pallet racking, it is preferable to have the carrying
rails inside the upright. |
|
|
|
|
|
|
|
|
|
|
|
| Model No. |
Pipe
Ref. |
Inches |
Weight |
Price |
| A |
B |
C |
D |
E |
F |
| L46-6 |
6 |
1.67 |
1.57 |
2.05 |
1.73 |
1.97 |
0.42 lbs |
$44.30 |
|
Type
LC50 - Single Swivel Socket |
Back
to Top |
 |
 |
|
|
|
|
|
Complete
Swivel Socket combination fitting
consisting of LM50 and LF50. |
|
|
|
|
|
|
|
|
|
|
|
| Model No. |
Pipe
Ref. |
Weight |
Price |
| A |
B |
| LC50-66 |
6 |
6 |
0.68 lbs |
$40.36 |
| LC50-77 |
7 |
7 |
0.90 lbs |
$48.22 |
| LC50-88 |
8 |
8 |
1.10 lbs |
$53.75 |
|
Type
LF50 - Female Socket Member |
Back
to Top |
 |
 |
|
|
|
|
|
The
female part of a swivel fitting combination.
Used with the male LM50, LM51 and LM52 to
create complete swivel sockets. |
|
|
|
|
|
| Model No. |
Pipe
Ref. |
Inches |
Weight |
Price |
| A |
B |
C |
D |
E |
Ø |
| LF50-6 |
6 |
1.97 |
1.67 |
2.95 |
2.09 |
0.38 |
0.37 lbs |
$19.08 |
| LF50-7 |
7 |
2.32 |
2.09 |
3.54 |
2.32 |
0.38 |
0.55 lbs |
$23.77 |
| LF50-8 |
8 |
2.56 |
2.36 |
3.54 |
2.64 |
0.38 |
0.64 lbs |
$28.44 |
|
Type
LM50 - Male Single Socket Member |
Back
to Top |
 |
 |
|
|
|
|
|
The
male part of a swivel fitting combination. This
fitting can also be used to attach flat panels to
tubular structures. |
|
|
|
|
|
| Model No. |
Pipe
Ref. |
Inches |
Weight |
Price |
| A |
B |
C |
D |
E |
Ø |
| LM50-6 |
6 |
1.97 |
1.73 |
1.85 |
0.43 |
0.38 |
0.26 lbs |
$21.04 |
| LM50-7 |
7 |
2.32 |
2 |
1.97 |
0.43 |
0.38 |
0.33 lbs |
$22.60 |
| LM50-8 |
8 |
2.56 |
2.36 |
2.17 |
0.43 |
0.38 |
0.44 lbs |
$25.26 |
|
Type
LC51 - Double Swivel Socket |
Back
to Top |
 |
 |
|
|
|
|
|
Complete
combination fitting consisting of two
LF50 and one LM51. For dimensions, see LF50
and LM51. |
|
|
|
|
|
|
|
|
|
|
|
| Model No. |
Inches |
Weight |
Price |
| A |
B |
C |
| LC51-666 |
6 |
6 |
6 |
1.26 lbs |
$71.13 |
| LC51-777 |
7 |
7 |
7 |
1.61 lbs |
$86.94 |
| LC51-888 |
8 |
8 |
8 |
1.88 lbs |
$93.80 |
|
Type
LM51 - Male Double Socket Member |
Back
to Top |
 |
 |
|
|
|
|
|
One
part of the LC51 combination fitting. This
can also be used for attaching flat panels to tubular
structures. |
|
|
|
|
|
| Model No. |
Pipe
Ref. |
Inches |
Rivet
Hole |
Weight |
Price |
| A |
B |
C |
D |
E |
F |
Ø |
| LM51-6 |
6 |
1.97 |
1.73 |
1.85 |
0.43 |
1.67 |
0.38" |
0.35 lbs |
$23.79 |
| LM51-7 |
7 |
2.32 |
2 |
1.97 |
0.43 |
2.09 |
0.38" |
0.51 lbs |
$34.25 |
| LM51-8 |
8 |
2.56 |
2.36 |
2.17 |
0.43 |
2.36 |
0.38" |
0.60 lbs |
$37.00 |
|
Type
LC52 - Corner Swivel Socket |
Back
to Top |
 |
 |
|
|
|
|
|
Complete
combination fitting consisting of two
LF50 and one LM52. For dimensions, see LF50
and LM52. |
|
|
|
|
|
|
|
|
|
|
|
| Model No. |
Inches |
Weight |
Price |
| A |
B |
C |
| LC52-666 |
6 |
6 |
6 |
1.30 lbs |
$70.80 |
| LC52-777 |
7 |
7 |
7 |
1.61 lbs |
$86.43 |
| LC52-888 |
8 |
8 |
8 |
1.88 lbs |
$93.55 |
|
Type
LM52 - Male Corner Swivel Socket Member |
Back
to Top |
 |
 |
|
|
|
|
|
One
part of combination fitting LC52. This fitting
can also be used for attaching flat panels to tubular
structures. |
|
|
|
|
|
|
|
|
|
|
|
| Model No. |
Pipe
Ref. |
Inches |
Rivet
Hole |
Weight |
Price |
| A |
B |
C |
D |
E |
F |
Ø |
| LM52-6 |
6 |
1.97 |
1.73 |
1.85 |
0.43 |
1.67 |
0.38" |
0.35 lbs |
$23.77 |
| LM52-7 |
7 |
2.32 |
2.00 |
1.97 |
0.43 |
2.09 |
0.38" |
0.51 lbs |
$34.13 |
| LM52-8 |
8 |
2.56 |
2.36 |
2.17 |
0.43 |
2.36 |
0.38" |
0.60 lbs |
$36.88 |
|
Type
LB54 - Adjustable Elbow |
Back
to Top |
 |
 |
|
|
|
|
|
A
swivel fitting designed as an in-line variable angle
connection, adjustable from 45° to 200°. Nut and
bolt are included. |
|
|
|
|
|
| Model No. |
Pipe
Ref. |
Inches |
Weight |
Price |
| A |
B |
C |
D |
| LB54-66 |
6 |
1.97 |
1.65 |
3.97 |
0.77 lbs |
$46.28 |
| LB54-77 |
7 |
2.28 |
2.17 |
4.69 |
1.43 lbs |
$57.48 |
| LB54-88 |
8 |
2.56 |
2.36 |
5.16 |
1.61 lbs |
$72.43 |
|
Click the button of the item you wish to purchase. Contact us for special lengths
Type
LC58 - Swivel Flange |
Back
to Top |
 |
 |
|
|
|
|
|
A
swivel fitting for attachment of angled pipe to a
flat setting.
Warning: This
fitting is not recommended for use
as a base flange to support guardrailing or
balustrading. |
|
|
|
|
|
|
|
|
|
|
|
| Model No. |
Pipe
Ref. |
Fixing Hole |
Weight |
Price |
| A |
Ø |
| LC58-6 |
6 |
0.45" |
0.74 lbs |
$39.89 |
| LC58-7 |
7 |
0.45" |
0.93 lbs |
$50.95 |
| LC58-8 |
8 |
0.45" |
1.23 lbs |
$55.78 |
|
Type
LM58 - Male Wall Plate |
Back
to Top |
 |
 |
|
|
|
|
|
This
fitting may be considered for various wall and
brace fixing applications. It is often combined with
Type LF50 to give an adjustable angle fitting Type
LC58. |
|
|
|
|
|
| Model No. |
Inches |
Rivet
Hole |
Fixing
Hole |
Weight |
Price |
| B |
C |
D |
E |
F |
Ø |
Ø |
| LM58 |
3.38 |
1.32 |
0.31 |
2.07 |
1.78 |
0.38" |
0.45" |
0.37 lbs |
$20.86 |
|
|
Back
to Top |
 |
 |
|
|
|
|
|
This flange, with
holes provided for countersunk
head fixing screws only, is used on structures where
the fixing is positional only. Frequently used as a
wall-fixing bracket. See Type L152 for a square
based alternate to this fitting.
Warning: It
is not recommended for use as a base
flange to support guardrailing or balustrading. |
|
|
|
|
|
| Model No. |
Pipe
Ref. |
Inches |
Weight |
Price |
| A |
B |
C |
D |
E |
F |
Ø |
| L61-6 |
6 |
1.67 |
1.97 |
0.31 |
3.94 |
1.93 |
0.25 |
0.46 lbs |
$28.67 |
| L61-7 |
7 |
2.09 |
2.17 |
0.31 |
4.33 |
2.4 |
0.25 |
0.64 lbs |
$35.06 |
| L61-8 |
8 |
2.36 |
2.36 |
0.31 |
4.72 |
2.64 |
0.25 |
0.71 lbs |
$41.17 |
|
Type
L62 - Standard Railing Flange |
Back
to Top |
 |
 |
|
|
|
|
|
Ideal
when a structural fixing is required. Type L62
should always be used to fix down guard-railing and
balustrading. The holes are of sufficient diameter to
give a good fixing with either a mechanical or
chemical anchor. The two socket set screws in the vertical socket give greater
stability to the upright. The fixing holes in the flanges should be inline
with the applied load. |
|
|
|
|
|
| Model No. |
Pipe
Ref. |
Inches |
Weight |
Price |
| A |
B |
C |
D |
E |
F |
G |
Ø |
| L62-6 |
6 |
1.97 |
3.54 |
0.35 |
3.5 |
5.04 |
2.95 |
0.55 |
0.77 lbs |
$38.14 |
| L62-7 |
7 |
2.18 |
3.54 |
0.35 |
4.02 |
5.51 |
3.23 |
0.55 |
0.94 lbs |
$41.92 |
| L62-8 |
8 |
2.43 |
3.54 |
0.35 |
4.53 |
6.3 |
3.31 |
0.55 |
1.17 lbs |
$48.90 |
|
|
Back
to Top |
 |
 |
|
|
|
|
|
Side
palm fixing for guardrailing and balustrading
to walls, parapets, steps and ramps. The upright
cannot drop through the socket.
Warning: If
the upright is required to pass through
the fitting by machining out the base stop, the
bottom-fixing hole will be unusable. |
|
|
|
|
|
|
|
|
|
|
|
| Model No. |
Pipe
Ref. |
Inches |
Weight |
Price |
| A |
B |
C |
D |
E |
F |
G |
H |
Ø |
| L68-6 |
6 |
1.67 |
2.8 |
2.52 |
0.95 |
2.95 |
3.98 |
0.31 |
0.45 |
0.53 lbs |
$45.44 |
| L68-7 |
7 |
2.09 |
3.39 |
3.15 |
1.1 |
3.5 |
4.45 |
0.31 |
0.45 |
0.77 lbs |
$45.44 |
| L68-8 |
8 |
2.36 |
3.78 |
3.62 |
1.22 |
3.94 |
5.04 |
0.31 |
0.45 |
0.95 lbs |
$52.53 |
|
Type
L69 - Railing Flange With Toeboard Adapter |
Back
to Top |
 |
 |
|
|
|
|
|
The
Type L69 fitting has been designed for
guardrailing and balustrading applications and
provides the added benefit of attaching a kick plate
to the base. The base plate holes are of sufficient
diameter to allow for attachment with either a
mechanical or chemical anchor, the side plates have
slotted holes to allow for a degree of sideways
movement for ease of installation. |
|
|
|
|
|
|
|
|
|
|
|
| Model No. |
Pipe
Ref. |
Inches |
Weight |
Price |
| A |
D |
E |
F |
G |
H |
F |
K |
L |
M |
N |
P |
Q |
R |
Ø |
| L69-8 |
8 |
0.39 |
0.59 |
6.30 |
3.54 |
3.15 |
4.41 |
2.28 |
0.79 |
0.45 |
5.12 |
1.97 |
0.31 |
2.24 |
0.45 |
1.65 lbs |
$79.74 |
|
|
Back
to Top |
 |
 |
|
|
|
|
|
A
metal drive-in plug, which is difficult to remove
when installed. For proper insertion, a rubber mallet
should be used. |
|
|
|
|
|
|
|
|
|
|
|
| Model No. |
Pipe
Ref. |
Inches |
Weight |
Price |
| A |
B |
C |
D |
| L84-6 |
6 |
1.34 |
1.2 |
0.22 |
0.04 lbs |
$7.37 |
| L84-7 |
7 |
1.69 |
1.22 |
0.24 |
0.11 lbs |
$11.36 |
| L84-8 |
8 |
1.93 |
1.22 |
0.24 |
0.11 lbs |
$13.18 |
|
|
Back
to Top |
 |
 |
|
|
|
|
|
An
internal swivel fitting, designed to accommodate
varying angles on handrailing to staircases, ramps,
or bracing. Used in conjunction with types L10,
L15, L25, or L45 it eliminates the need for specially
drilled angle fittings. Patent Pending. |
|
|
|
|
|
|
|
|
|
|
|
| Model No. |
Pipe
Ref. |
Inches |
Weight |
Price |
| A |
B |
C |
D |
E |
| L114-6 |
6 |
1.69 |
2.2 |
1.77 |
1.26 |
0.40 lbs |
$37.02 |
| L114-7 |
7 |
2.09 |
2.52 |
1.69 |
1.57 |
0.64 lbs |
$49.43 |
| L114-8 |
8 |
2.36 |
2.76 |
1.81 |
1.57 |
0.78 lbs |
$55.96 |
|
Type
L148 - Heavy Duty Rectangular Flange |
Back
to Top |
 |
 |
|
|
|
|
|
Type
L148 is a structural base fixing used to fix down guardrailing and balustrading.
This fitting is available
with 2 or 4 fixing holes which are of sufficient
diameter to give a good fixing with either a
mechanical or chemical anchor. The two socket set screws in the vertical
socket give greater stability to
the upright. It is recommended that the fixing holes in
the flanges should be inline with the applied load. |
|
|
|
|
|
|
|
|
|
|
|
| Model No. |
Pipe
Ref. |
Inches |
Weight |
Price |
| A |
B |
C |
D |
E |
F |
G |
H |
J |
Ø |
| L148-92 |
9 |
3.07 |
3.43 |
0.47 |
3.03 |
7.80 |
5.12 |
6 |
1.75 |
13/16 |
2.49 lbs |
$127.93 |
| L148-94 |
9 |
3.07 |
3.43 |
0.47 |
3.03 |
7.80 |
5.12 |
6 |
1.75 |
9/16 |
2.49 lbs |
$144.03 |
|
Type
L150 - Heavy Duty 4 Hole Square Flange |
Back
to Top |
 |
 |
|
|
|
|
|
A
heavy duty, four point fixing base flange. Ideal
when a structural fixing is required. |
|
|
|
|
|
|
|
|
|
|
|
| Model No. |
Pipe
Ref. |
Inches |
Weight |
Price |
| A |
B |
C |
D |
E |
F |
Ø |
| L150-8 |
8 |
2.56 |
3 |
0.51 |
5 |
3.50 |
0.45 |
1.61 lbs |
$70.10 |
|
Type
L152 - 4 Hole Square Flange |
Back
to Top |
 |
 |
|
|
|
|
|
A
four point fixing base or wall flange. See L150 if
a heavy duty version is required. |
|
|
|
|
|
| Model No. |
Pipe
Ref. |
Inches |
Weight |
Price |
| A |
B |
C |
D |
E |
F |
Ø |
| L152-6 |
6 |
1.97 |
1.81 |
0.25 |
2.99 |
2.06 |
0.31 |
0.35 lbs |
$26.87 |
| L152-7 |
7 |
2.32 |
2.17 |
0.31 |
3.35 |
2.38 |
0.45 |
0.59 lbs |
$33.01 |
| L152-8 |
8 |
2.56 |
2.56 |
0.31 |
3.62 |
2.63 |
0.45 |
0.68 lbs |
$40.15 |
|
Type
L160 - Smooth Handrail Fitting |
Back
to Top |
 |
 |
|
|
|
|
|
Designed
to provide attachment for a smooth
handrail. The fitting swivels allowing the handrail to
be placed at any angle. Installation instructions are
available, contact us for the information. |
|
|
|
|
|
|
|
|
|
|
|
| Model No. |
Pipe
Ref. |
Inches |
Weight |
Price |
| A |
B |
C |
D |
E |
F |
| L160-7 |
7 |
2.32 |
1.57 |
0.39 |
1.57 |
2.52 |
0.24 lbs |
$55.96 |
| L160-8 |
8 |
2.32 |
1.57 |
0.31 |
1.57 |
2.64 |
0.22 lbs |
$56.01 |
|
Type
L164 - Offset Wall Flange |
Back
to Top |
 |
 |
|
|
|
|
|
This
fitting is designed for side palm fixing of
uprights to steel channels, walls, parapets, steps and ramps. The upright
cannot drop through the socket. |
|
|
|
|
|
|
|
|
|
|
|
| Model No. |
Pipe
Ref. |
Inches |
Weight |
Price |
| A |
B |
C |
D |
E |
F |
Ø |
| L164-8 |
8 |
2.56 |
4 |
0.5 |
4 |
3 |
0.45 |
1.87 lbs |
$104.67 |
|
|
|
|
|
|
|
|
|
|
Back
to Top |
|
|
|
|
|
|
|
|
|
|
Pipe
Reference Chart |
• Kee Lite Fittings are made from high grade
Aluminum Silicon Magnesium Alloy
• Recommended set screw torque is 29 lbs./ft.
• Minimum slip load capacity on Aluminum Schedule
40 pipe: 1,700 lbs. (safety factor = 2)
• Minimum slip load capacity on steel Schedule
40 pipe: 2,000 lbs. (Safety factor = 2)
• Larger set screws are designed to resist thread
stripping
• Minimum Material UTS: 33,000 PSI
• All Kee Lite Fittings undergo independent
testing by TÜV |
|
|
|
Kee Lite
Pipe Size |
Nom.
Bore* in |
Pipe Dia.
O.D. in |
Fitting
I.D. in |
Tube Dia.
OD in |
| 6 |
1 |
1.32 |
1.38 |
1 5/16 |
| 7 |
1.25 |
1.66 |
1.72 |
1 5/8 |
| 8 |
1.50 |
1.90 |
1.94 |
1 7/8 |
| 9 |
2 |
2.38 |
2.41 |
2 3/8 |
|
|
|
|
* Nominal
Bore is an arbitrary dimension because the bore varies
with the wall thickness of the pipe. Pipe sizes are shown in the table
and in the drawings below. |
|
|
|
|
|
|
Pipe
For Your Structure |
|
Structures
built using Kee Lite Fittings will require either
steel or aluminum pipe. We suggest using Schedule 40
Anodized Aluminum Pipe, Alloy 6105 - T5/6 which we
have in stock. Pipe is available for fittings sizes 6, 7, 8,
and 9 in either 24 foot or 12 foot long sections. We can
even cut pipe to your exact requirements. |
|
|
|
Kee
Lite Aluminum fittings are designed
to suit Schedule 40 (aluminum and steel),
pipe sizes 1" - 2". |
|
|
|
|
|
|
|
|
|
 |
|
Aluminum Fittings, Aluminum
Pipe Fitting, Aluminum Pipe Fittings, Aluminum Pipe Railing, Kee Klamp,
Kee Klamps, Pipe
Hand Rail, Pipe Handrail, Pipe Rail, Pipe Rail Fittings, Pipe Railing,
Slip on Pipe Fittings, and Kee Lite from your complete
source for material handling equipment. |
|
