NERG/ERG SERIES
|
ELECTRIC CHAIN HOISTS WITH
GEARED TROLLEY
|
|
|
|
|
|
|
|
|
|
|
|
|
Mounting our NER Series hoist to either a GT geared trolley will create an easy and
economical method of transporting the load. This combination is ideal for small
workshops and infrequent moves. |
|
|
|
|
|
|
|
|
|
|
|
|
| Standard Trolley Specifications |
|
 |
|
|
|
|
|
|
|
|
|
|
|
|
 Capacity Range |
|
|
|
Wheels |
|
|
|
GT Geared – 1/8 Ton – 5 Ton |
|
|
|
|
|
All steel
Sealed ball bearings
Fit flat or tapered beam flange |
|
|
|
|
|
|
|
|
|
|
| Shafts |
|
|
|
|
|
|
|
|
Standard shafts fit wide range Longer
shafts for wider beams Spacers for easy
adjustments |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Standard Hoist Pendant Drop |
|
|
|
|
|
|
|
4' less than lift
(longer drops available) |
|
|
|
|
|
|
|
|
|
|
| Drop Stops |
|
|
|
|
|
|
|
|
|
|
|
|
Standard |
|
Standard Hoist Power Supply Length |
|
|
|
|
|
|
|
|
15' (longer lengths available) |
|
| Bumpers |
|
|
|
|
|
|
|
|
|
|
Optional |
|
|
Standard Pendants |
|
|
|
|
|
|
|
|
Single speed: 2-button
(momentary contacts)
Dual speed: 2-button
(momentary contacts)
with emergency On/Off
(maintained contacts) |
|
| Standard Hand Chain Drop |
|
|
|
|
|
|
|
|
|
|
|
|
On geared trolleys 2' less than lift
(longer drops available) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
*For Dual Speed Models refer to table below single
speed price table. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| FEATURES AND BENEFITS |
|
|
|
|
|
|
| UL® Listed |
|
Standard Count Hour Meter |
|
Certified and listed to UL 1340 "Standard for Hoists." |
|
|
Records and displays the number of lowering starts
and hoist on time which is valuable for preventive
maintenance. Integral to VFD on dual speed models. |
|
|
|
|
|
| Green Initiative |
|
|
|
Built smarter without the use of harmful materials. Environmentally friendly. RoHS compliant. |
|
|
|
|
|
|
|
|
High Strength, Corrosion and Wear Resistant
Load Chain |
|
|
|
|
| Notched Hook and Latch System |
|
|
|
Grade 80, super strength, nickelplated load chain,
certified to DIN standards, uses unique technology
to greatly increase resistance to fatigue and wear. |
|
Provides positive closing and improves resistance
against lateral forces. |
|
|
|
|
|
|
|
| Limit Switches |
|
|
|
|
|
|
Dual Speed VFD |
|
Low-profile upper and lower limit switches are
standard. |
|
|
|
|
Under-the-cover VFD standard for dual speed hoists.
Speed ratio is 6:1 with adjustability up to 12:1. |
|
|
|
|
|
| Extended Chain Life |
|
|
|
|
|
|
"The Guardian": Smart Brake Technology |
|
Decreased chain wear as a result of a revolutionary heat
treatment process, improved material and chain size. |
|
|
|
|
A current driven electromagnetic brake does not
release unless the motor is energized. 10 year hoist
brake warranty. |
|
|
|
|
|
| Contactors |
|
|
|
Mechanically interlocked, heavy-duty contactors on
single speed models. |
|
|
|
|
|
|
|
|
Pendant Controls |
|
|
|
Ergonomic design for operator comfort. Red button
emergency stop is standard on all 2-button dual speed
pendants. |
|
|
|
|
|
| High Air Flow |
|
|
|
Cooler motor and brake attributed to an engineered
motor fin, fan blade and fan cover design. |
|
|
|
|
|
|
|
|
Easy Access Suspension |
|
|
|
|
| Unique Load Sheave |
|
|
|
External pins allow for quick change from hook to
lug for trolley mount configurations on most models. |
|
Increased number of pockets reduce chain vibration and
increase chain life. 5 pockets standard; 6 pockets on
smaller body hoists. |
|
|
|
|
|
|
|
|
|
|
|
|
| Friction Clutch and Load Brake |
|
|
|
|
|
Friction clutch is standard on NER/ER models
and friction clutch with mechanical load brake
standard on ER models. Carbon friction material
provides consistent performance over a wide
temperature range. |
|
|
|
|
|
|
|
|
|
|
| Electric Chain Hoists Enhanced Features |
 |
|
 |
|
|
|
|
|
NERG/ERG SINGLE SPEED HOIST WITH GEARED TROLLEY - SPECIFICATIONS
|
|
Cap.
(tons) |
Product
Code # |
Std.
Lift
(ft) |
Push
Button
Cord L (ft) |
Lifting Motor 3 Phase 60 Hz. |
Flange Width
Adjustability
B (in) |
Min.** Allow
Radius for
Curve (in) |
Load Chain
Dia. (mm) x
Chain
Fall Lines |
Net
Wgt.
(lbs) |
Weight
for Addnl.
One Ft.
of Lift (lbs) |
Output
(Hp) |
Rated Current (amps) |
| @208V-230V |
@460V |
Standard |
Optional |
NER/ER
|
| 1/8 |
(N)ERG001H |
10 |
8.2 |
0.75 |
3.4 |
1.7 |
2.28 to 5.00 |
5.01 to 8.00
OR
8.01 to 12.00 |
51.2 |
4.3 x 1 |
88/90 |
.94 |
| 1/4 |
(N)ERG003S |
0.75 |
3.4 |
1.7 |
4.3 x 1 |
88/90 |
.94 |
| 1/4 |
(N)ERG003H |
1.2 |
4.8 |
2.5 |
6.0 x 1 |
108/110 |
1.1 |
| 1/2 |
(N)ERG005L |
0.75 |
3.4 |
1.7 |
6.0 x 1 |
99/106 |
1.1 |
| 1/2 |
(N)ERG005S |
1.2 |
4.8 |
2.5 |
2.28 to 5.00 |
5.01 to 8.00
OR
8.01 to 12.00 |
51.2 |
6.0 x 1 |
108/110 |
1.1 |
| 1 |
(N)ERG010L |
1.2 |
4.8 |
2.5 |
7.7 x 1 |
130/137 |
1.6 |
| 1 |
(N)ERG010S |
2.4 |
8.6 |
4.2 |
3.23 to 6.02 |
6.03
to 12.00 |
59.1 |
7.7 x 1 |
146/146 |
1.6 |
| 1 1/2 |
(N)ERG015S |
2.4 |
8.6 |
4.2 |
10.2 x 1 |
196/209 |
2.2 |
| 2 |
(N)ERG020C |
1.2 |
4.8 |
2.5 |
7.7 x 2 |
172/176 |
2.4 |
| 2 |
(N)ERG020L |
2.4 |
8.6 |
4.2 |
10.2 x 1 |
198/212 |
2.2 |
| 2 |
(N)ERG020S |
4.7 |
16.4 |
7.9 |
10.2 x 1 |
240/238 |
2.2 |
| 2 1/2 |
(N)ERG025S |
4.7 |
16.4 |
7.9 |
66.9 |
11.2 x 1 |
289/287 |
2.5 |
| 3 |
(N)ERG030L* |
4.7 |
18.3 |
9.2 |
12.5 x 1 |
322/322 |
2.9 |
| 3 |
(N)ERG030C |
9.2 |
4.7 |
16.4 |
7.9 |
10.2 x 2 |
293/291 |
3.8 |
| 5 |
(N)ERG050L |
4.7 |
16.4 |
7.9 |
3.94 to 7.02 |
7.03 to 12.00 |
90.6 |
11.2 x 2 |
415/410 |
4.4 |
|
| SEE BOTTOM TABLE BELOW FOR PRICING |
|
|
*The NERG030L listed are the previous hoist models.
**Minimum Flange Width for curved beam: 1 Ton Push and 1/8 to 1 Ton Geared = 2.87 in. 3 Ton Push or Geared = 3.50 in |
|
|
|
|
NERG/ERG SINGLE SPEED HOIST WITH GEARED TROLLEY - DIMENSIONS
|
|
|
 |
|
|
|
DIMENSIONS (inches)
|
Cap.
(Tons) |
Product Code |
Headroom
C (in) |
E
(ft) |
a
(in) |
b
(in) |
e
(in) |
g
(in) |
h
(in) |
i
(in) |
j
(in) |
k
(in) |
k'
(in) |
m
(in) |
n
(in) |
r
(in) |
t
(in) |
u
(in) |
| Single Speed |
| 1/8 |
(N)ERG001H |
16.3 |
10.5 |
13.6 |
9.3 |
6.0 |
1.1 |
4.2 |
2.80 |
1.1 |
3.7 |
4.2 |
2.2 |
4.4 |
2.0 |
0.98 |
7.2 |
| 1/4 |
(N)ERG003S |
16.3 |
10.5 |
13.6 |
9.3 |
6.0 |
1.1 |
4.2 |
2.80 |
1.1 |
3.7 |
4.2 |
2.2 |
4.4 |
2.0 |
0.98 |
7.2 |
| 1/4 |
(N)ERG003H |
17.1 |
10.5 |
13.6 |
9.3 |
6.0 |
1.1 |
4.2 |
2.80 |
1.1 |
3.7 |
4.2 |
2.2 |
4.4 |
2.0 |
0.98 |
7.2 |
| 1/2 |
(N)ERG005L |
17.1 |
10.5 |
13.6 |
9.3 |
6.0 |
1.1 |
4.2 |
2.80 |
1.1 |
3.7 |
4.2 |
2.2 |
4.4 |
2.0 |
0.98 |
7.2 |
| 1/2 |
(N)ERG005S |
17.1 |
10.5 |
13.6 |
9.3 |
6.0 |
1.1 |
4.2 |
2.80 |
1.1 |
3.7 |
4.2 |
2.2 |
4.4 |
2.0 |
0.98 |
7.2 |
| 1 |
(N)ERG010L |
18.5 |
10.5 |
13.6 |
9.3 |
6.0 |
1.2 |
4.2 |
2.80 |
1.1 |
3.7 |
4.2 |
2.2 |
4.4 |
2.0 |
0.98 |
7.2 |
| 1 |
(N)ERG010S |
18.5 |
10.5 |
13.6 |
9.3 |
6.0 |
1.2 |
4.2 |
2.80 |
1.1 |
3.7 |
4.2 |
2.2 |
4.4 |
2.0 |
0.98 |
7.2 |
| 1 1/2 |
(N)ERG015S |
22.4 |
10.5 |
15.2 |
11.0 |
6.1 |
1.3 |
5.0 |
3.35 |
1.4 |
4.4 |
4.3 |
2.8 |
5.2 |
2.4 |
1.26 |
7.2 |
| 2 |
(N)ERG020C |
27.0 |
10.5 |
15.2 |
11.0 |
6.1 |
1.5 |
5.0 |
3.35 |
1.4 |
4.4 |
4.3 |
2.8 |
5.2 |
2.4 |
1.26 |
7.2 |
| 2 |
(N)ERG020L |
25.0 |
10.5 |
15.2 |
11.0 |
6.1 |
1.5 |
5.0 |
3.35 |
1.4 |
4.4 |
4.3 |
2.8 |
5.2 |
2.4 |
1.26 |
7.2 |
| 2 |
(N)ERG020S |
25.6 |
10.5 |
15.2 |
11.0 |
6.1 |
1.5 |
5.0 |
3.35 |
1.4 |
4.4 |
4.3 |
2.8 |
5.2 |
2.4 |
1.26 |
7.2 |
| 2 1/2 |
(N)ERG025S |
26.8 |
11.2 |
15.7 |
12.8 |
6.2 |
1.5 |
5.8 |
3.94 |
1.4 |
5.3 |
4.5 |
3.1 |
6.0 |
2.7 |
1.42 |
7.2 |
| 3 |
(N)ERG030L* |
27.8 |
11.0 |
15.7 |
12.8 |
6.2 |
1.7 |
5.8 |
3.94 |
1.4 |
5.3 |
4.5 |
3.1 |
6.0 |
2.7 |
1.42 |
7.2 |
| 3 |
(N)ERG030C |
32.7 |
11.2 |
15.7 |
12.8 |
6.2 |
1.7 |
5.8 |
3.94 |
1.4 |
5.3 |
4.5 |
3.1 |
6.0 |
2.7 |
1.42 |
7.2 |
| 5 |
(N)ERG050L |
35.4 |
11.5 |
15.7 |
15.7 |
6.1 |
1.9 |
6.7 |
4.65 |
1.8 |
5.6 |
5.2 |
3.2 |
7.0 |
3.4 |
2.13 |
7.2 |
|
| *The NERG030L listed is the previous hoist model. |
Click the button of the item you wish to purchase. Contact us for special lengths
|
|
PRICING FOR NERG SINGLE SPEED HOIST WITH GEARED TROLLEY
|
Cap.
(Tons) |
Product
Code |
Lift
Spd.
(FPM) |
Standard Lifts |
Max. Lift
w/Canvas
Chain
Cont. |
Chain
Cont.
Adder |
Extra Lift (Ft.) |
Load
Chain |
Push
Button
Cord |
Hand
Chain |
Total |
| 10' |
15' |
20' |
| 1/8 |
NERG001H |
55 |
|
|
|
50
|
|
|
|
|
|
| 1/4 |
NERG003S |
36 |
|
|
|
50
|
| 1/4 |
NERG003H |
53 |
|
|
|
50
|
|
|
|
| 1/2 |
NERG005L |
15 |
|
|
|
50
|
| 1/2 |
NERG005S |
29 |
|
|
|
50
|
| 1 |
NERG010L |
14 |
|
|
|
50
|
|
|
|
| 1 |
NERG010S |
28 |
|
|
|
50
|
| 1 1/2 |
NERG015S |
18 |
|
|
|
60
|
|
|
|
| 2 |
NERG020C |
7 |
|
|
|
26
|
|
|
|
| 2 |
NERG020L |
14 |
|
|
|
60
|
|
|
|
| 2 |
NERG020S |
28 |
|
|
|
60
|
| 2 1/2 |
NERG025S |
22 |
|
|
|
40
|
|
|
| 3 |
NERG030L* |
16 |
|
|
|
26
|
|
|
| 3 |
NERG030C |
17 |
|
|
|
20
|
|
|
| 5 |
NERG050L |
11 |
|
|
|
20
|
|
|
|
Std. pendant hangs approximately 4 ft. above the hoist's fully extended bottom hook. For lifts or push button cord lengths other than
standard, use 10 ft. base price plus adders for load chain and push button cord.
Hoists may require a chain container based on the capacity, lift or suspension, consult us.
Lifts larger than stated "Max. Lift w/Canvas Chain Cont." may require steel chain container for balance, consult us.
Standard power supply cord 1/8 - 5 Ton is 15 ft. For optional 30 ft. length add $140.82
. Standard power supply above 5 Ton is 30 ft.
Extra per ft. over 30 ft. is $9.40
. No price deduction for shorter lengths.
Cable support trolley included for every 5 ft. of power supply cord. Thermal motor protection is standard.
Standard trolley hand chain hangs approx. 2 ft. less than hoist's fully extended bottom hook.
*The NERG030L listed is the previous hoist model. |
|
|
PRICING FOR ERG SINGLE SPEED HOIST WITH GEARED TROLLEY
|
Cap.
(Tons) |
Product
Code |
Lift
Spd.
(FPM) |
Standard Lifts |
Max. Lift
w/Canvas
Chain
Cont. |
Chain
Cont.
Adder |
Extra Lift (Ft.) |
Load
Chain |
Push
Button
Cord |
Hand
Chain |
Total |
| 10' |
15' |
20' |
| 1/8 |
ERG001H |
55 |
|
|
|
50
|
|
|
|
|
|
| 1/4 |
ERG003S |
36 |
|
|
|
50
|
| 1/4 |
ERG003H |
53 |
|
|
|
50
|
|
|
|
| 1/2 |
ERG005L |
15 |
|
|
|
50
|
| 1/2 |
ERG005S |
29 |
|
|
|
50
|
| 1 |
ERG010L |
14 |
|
|
|
50
|
|
|
|
| 1 |
ERG010S |
28 |
|
|
|
50
|
| 1 1/2 |
ERG015S |
18 |
|
|
|
60
|
|
|
|
| 2 |
ERG020C |
7 |
|
|
|
26
|
|
|
|
| 2 |
ERG020L |
14 |
|
|
|
60
|
|
|
|
| 2 |
ERG020S |
28 |
|
|
|
60
|
| 2 1/2 |
ERG025S |
22 |
|
|
|
40
|
|
|
| 3 |
ERG030C |
17 |
|
|
|
20
|
|
|
| 5 |
ERG050L |
11 |
|
|
|
20
|
|
|
|
Std. pendant hangs approximately 4 ft. above the hoist's fully extended bottom hook. For lifts or push button cord lengths other than
standard, use 10 ft. base price plus adders for load chain and push button cord.
Hoists may require a chain container based on the capacity, lift or suspension, consult us.
Lifts larger than stated "Max. Lift w/Canvas Chain Cont." may require steel chain container for balance, consult us.
Standard power supply cord 1/8 - 5 Ton is 15 ft. For optional 30 ft. length add $140.82
. Standard power supply above 5 Ton is 30 ft.
Extra per ft. over 30 ft. is $9.40
. No price deduction for shorter lengths.
Cable support hangers included for every 5 ft. of power supply cord.
Thermal motor protection is standard.
Standard trolley hand chain hangs approx. 2 ft. less than hoist's fully extended bottom hook. |
Click the button of the item you wish to purchase. Contact us for special lengths
|
PRICING FOR GEARED TROLLEY SHAFT EXTENDERS
|
| Cap. (Tons) |
Std. Flange Width (in.) |
Flange Width w/Ext. Shaft (in.) |
Price |
| 1/8 - 1 |
2.28-5.00 |
5.01-8.00 |
|
| 8.01-12.00 |
|
| 1 1/2 - 2 |
3.23-6.02 |
6.03-12.00 |
|
| 2 1/2 - 3 |
3.23-6.02 |
6.03-12.00 |
|
| 5 |
4.92-7.02 |
7.03-12.00 |
|
|
| For flange ranges beyond this chart, consult us. Pricing applies only when purchased with GT Trolley. |
|
Dual Speed NERG/ERG Electric Chain Hoists with Geared Trolley
|
|
|
|
|
|
|
|
|
|
 |
|
|
|
|
|
|
NERG/ERG DUAL SPEED HOIST WITH GEARED TROLLEY - SPECIFICATIONS
|
|
Cap.
(tons) |
Product
Code # |
Std.
Lift
(ft) |
Push
Button
Cord
L (ft) |
Lifting Motor 3 Phase 60 Hz. |
Flange Width
Adjustability
B (in) |
Min.** Allow
Radius for
Curve (in) |
Load Chain
Dia. (mm) x
Chain
Fall Lines |
Net
Wgt.
(lbs) |
Weight
for Addnl.
One Ft.
of Lift (lbs) |
Output
(Hp) |
Rated Current (amps) |
| @208V-230V |
@460V |
Standard |
Optional |
NER/ER
|
| 1/8 |
(N)ERG001HD |
10 |
8.2 |
0.75 |
3.6 |
1.8 |
2.28 to
5.00 |
5.01 to 8.00
OR
8.01 to 12.00 |
51.2 |
4.3 x 1 |
88/92 |
.94 |
| 1/4 |
(N)ERG003SD |
0.75 |
3.6 |
1.8 |
4.3 x 1 |
88/92 |
.94 |
| 1/4 |
(N)ERG003HD |
1.2 |
5.1 |
2.7 |
6.0 x 1 |
106/110 |
1.1 |
| 1/2 |
(N)ERG005LD |
0.75 |
3.6 |
1.8 |
6.0 x 1 |
97/106 |
1.1 |
| 1/2 |
(N)ERG005SD |
1.2 |
5.1 |
2.7 |
2.28 to
5.00 |
5.01 to 8.00
OR
8.01 to 12.00 |
51.2 |
6.0 x 1 |
106/110 |
1.1 |
| 1 |
(N)ERG010LD |
1.2 |
5.1 |
2.7 |
7.7 x 1 |
126/135 |
1.6 |
| 1 |
(N)ERG010SD |
2.4 |
9.1 |
4.5 |
3.23 to
6.02 |
6.03
to 12.00 |
59.1 |
7.7 x 1 |
141/143 |
1.6 |
| 1 1/2 |
(N)ERG015SD |
2.4 |
9.1 |
4.5 |
10.2 x 1 |
196/212 |
2.2 |
| 2 |
(N)ERG020CD |
1.2 |
5.1 |
2.7 |
7.7 x 2 |
165/174 |
2.4 |
| 2 |
(N)ERG020LD |
2.4 |
9.1 |
4.5 |
10.2 x 1 |
198/212 |
2.2 |
| 2 |
(N)ERG020SD |
4.7 |
17.3 |
8.3 |
10.2 x 1 |
236/243 |
2.2 |
| 2 1/2 |
(N)ERG025SD |
4.7 |
17.3 |
8.3 |
66.9 |
11.2 x 1 |
280/293 |
2.5 |
| 3 |
(N)ERG030LD* |
4.7/1.6 |
19.6/9.4 |
9.8/4.7 |
12.5 x 1 |
366/366 |
2.9 |
| 3 |
(N)ERG030CD |
9.2 |
4.7 |
17.3 |
8.3 |
10.2 x 2 |
289/295 |
3.8 |
| 5 |
(N)ERG050LD |
4.7 |
17.3 |
8.3 |
3.94 to 7.02 |
7.03 to 12.00 |
90.6 |
11.2 x 2 |
406/419 |
4.4 |
|
*The NERG030LD listed are the previous hoist models.
**Minimum Flange Width for curved beam: 1 Ton Push and 1/8 to
1 Ton Geared = 2.87 in. 3 Ton Push or Geared = 3.50 in |
|
|
|
|
|
NERG/ERG DUAL SPEED HOIST WITH GEARED TROLLEY - DIMENSIONS
|
|
DIMENSIONS (inches)
|
Cap.
(Tons) |
Product Code |
Headroom
C (in) |
E
(ft) |
a
(in) |
b
(in) |
e
(in) |
g
(in) |
h
(in) |
i
(in) |
j
(in) |
k
(in) |
k'
(in) |
m
(in) |
n
(in) |
r
(in) |
t
(in) |
u
(in) |
| Dual Speed |
| 1/8 |
(N)ERG001HD |
16.3 |
10.5 |
13.6 |
9.3 |
6.0 |
1.1 |
4.2 |
2.80 |
1.1 |
3.7 |
4.2 |
2.2 |
4.4 |
2.0 |
0.98 |
7.2 |
| 1/4 |
(N)ERG003SD |
16.3 |
10.5 |
13.6 |
9.3 |
6.0 |
1.1 |
4.2 |
2.80 |
1.1 |
3.7 |
4.2 |
2.2 |
4.4 |
2.0 |
0.98 |
7.2 |
| 1/4 |
(N)ERG003HD |
17.1 |
10.5 |
13.6 |
9.3 |
6.0 |
1.1 |
4.2 |
2.80 |
1.1 |
3.7 |
4.2 |
2.2 |
4.4 |
2.0 |
0.98 |
7.2 |
| 1/2 |
(N)ERG005LD |
17.1 |
10.5 |
13.6 |
9.3 |
6.0 |
1.1 |
4.2 |
2.80 |
1.1 |
3.7 |
4.2 |
2.2 |
4.4 |
2.0 |
0.98 |
7.2 |
| 1/2 |
(N)ERG005SD |
17.1 |
10.5 |
13.6 |
9.3 |
6.0 |
1.1 |
4.2 |
2.80 |
1.1 |
3.7 |
4.2 |
2.2 |
4.4 |
2.0 |
0.98 |
7.2 |
| 1 |
(N)ERG010LD |
18.5 |
10.5 |
13.6 |
9.3 |
6.0 |
1.2 |
4.2 |
2.80 |
1.1 |
3.7 |
4.2 |
2.2 |
4.4 |
2.0 |
0.98 |
7.2 |
| 1 |
(N)ERG010SD |
18.5 |
10.5 |
13.6 |
9.3 |
6.0 |
1.2 |
4.2 |
2.80 |
1.1 |
3.7 |
4.2 |
2.2 |
4.4 |
2.0 |
0.98 |
7.2 |
| 1 1/2 |
(N)ERG015SD |
22.4 |
10.5 |
15.2 |
11.0 |
6.1 |
1.3 |
5.0 |
3.35 |
1.4 |
4.4 |
4.3 |
2.8 |
5.2 |
2.4 |
1.26 |
7.2 |
| 2 |
(N)ERG020CD |
27.0 |
10.5 |
15.2 |
11.0 |
6.1 |
1.5 |
5.0 |
3.35 |
1.4 |
4.4 |
4.3 |
2.8 |
5.2 |
2.4 |
1.26 |
7.2 |
| 2 |
(N)ERG020LD |
25.0 |
10.5 |
15.2 |
11.0 |
6.1 |
1.5 |
5.0 |
3.35 |
1.4 |
4.4 |
4.3 |
2.8 |
5.2 |
2.4 |
1.26 |
7.2 |
| 2 |
(N)ERG020SD |
25.6 |
10.5 |
15.2 |
11.0 |
6.1 |
1.5 |
5.0 |
3.35 |
1.4 |
4.4 |
4.3 |
2.8 |
5.2 |
2.4 |
1.26 |
7.2 |
| 2 1/2 |
(N)ERG025SD |
26.8 |
11.2 |
15.7 |
12.8 |
6.2 |
1.5 |
5.8 |
3.94 |
1.4 |
5.3 |
4.5 |
3.1 |
6.0 |
2.7 |
1.42 |
7.2 |
| 3 |
(N)ERG030LD* |
27.8 |
11.0 |
15.7 |
12.8 |
6.2 |
1.7 |
5.8 |
3.94 |
1.4 |
5.3 |
4.5 |
3.1 |
6.0 |
2.7 |
1.42 |
7.2 |
| 3 |
(N)ERG030CD |
32.7 |
11.0 |
15.7 |
12.8 |
6.2 |
1.8 |
5.8 |
3.94 |
1.4 |
5.3 |
4.5 |
3.1 |
6.0 |
2.7 |
1.42 |
7.2 |
| 5 |
(N)ERG050LD |
33.1 |
11.5 |
15.8 |
15.7 |
6.2 |
1.9 |
6.7 |
4.65 |
1.8 |
5.6 |
5.1 |
3.2 |
7.0 |
3.4 |
2.13 |
7.2 |
|
| *The NERG030L listed is the previous hoist model. |
|
NER Dual Speed Electric Chain Hoists
Smart Limit Option
|
Our unique Smart Limit is available on NER three phase dual speed electric chain hoists. Unlike geared limit
switches, this Smart Limit allows the user to add upper and lower limit positions that can be conveniently
programmed at the pendant. The soft stop feature within the Smart Limit slows the hook down as it approaches
each limit for smooth and very precise load positioning. |
Click the button of the item you wish to purchase. Contact us for special lengths
|
|
PRICING FOR Electric Chain Hoists - Three Phase
|
| NER/ER - 6:1 Standard Hoist Adjustable to 12:1 Dual Speed and Smart Limit Adders (VFD Control) |
|
| Dual Speed Hoist Price (NER/ER SERIES) |
Smart Limit (NER Series) |
Cap.
(Tons) |
Product Code |
Lift Spd.
(FPM) |
Extra $ |
Net Weight
Adder (lbs) |
Extra $ |
| 1/8 |
NER001HD
|
55/9 |
|
11 |
|
| 1/4 |
NER003SD
|
36/6 |
|
11 |
|
| 1/4 |
NER003HD
|
53/9 |
|
17 |
|
| 1/2 |
NER005LD
|
15/2.5 |
|
14 |
|
| 1/2 |
NER005SD
|
29/5 |
|
17 |
|
| 1 |
NER010LD
|
14/2.5 |
|
18 |
|
| 1 |
NER010SD
|
28/4.5 |
|
18 |
|
| 1 1/2 |
NER015SD
|
18/3 |
|
16 |
|
| 2 |
NER020CD
|
7/1 |
|
16 |
|
| 2 |
NER020LD
|
14/2.5 |
|
47 |
|
| 2 |
NER020SD
|
28/4.5 |
|
47 |
|
| 2 1/2 |
NER025SD
|
22/3.5 |
|
46 |
|
| 3 |
NER030LD*
|
17/6 |
|
44 |
-
|
| 3 |
NER030CD
|
17/3 |
|
51 |
|
| 5 |
NER050LD
|
11/2 |
|
46 |
|
|
|
*The NER/ER030LD listed is the previous hoist model (2 speed hoist & trolley via contactor control; trolley via VFD.
Consult us for VFD packages). |
Specify hoist model and voltage. VFD Control is not reconnectable voltage.
Retrofit Smart Limit to existing NER Series hoist is not available.
Smart Limit can only be added to NER dual speed (VFD Control) units.
Infinitely Variable Speed - VFD Adder (Add to Dual Speed Prices)
• 2-Step infinitely variable - add $133.97
for each infinitely variable directional axis.
• 3-Step infinitely variable - add $468.80
for each infinitely variable directional axis. |
|
| (N)ER VFD HOIST CONTROL DESCRIPTIONS |
|
Dual Speed Control
Uses a 2-step button and a VFD to control the speed. Pressing the button to the first step causes the hoist to
accelerate smoothly to the low speed. Pressing the button to the second step causes the hoist to accelerate
smoothly to the high speed. Releasing the button from the second step to the first step causes the hoist to
smoothly decelerate to the low speed. Releasing the button completely from any step causes the hoist to
decelerate quickly to a stop with the brake holding the load. |
|
2–Step Infinitely Variable Control
Uses a 2-step button and a VFD to control the speed. The acceleration rate can be changed by changing
parameters in the VFD. The 2-Step Infinitely Variable differs from Dual Speed Control in that when releasing
the button from the second step to the first step it will maintain whatever the speed was at the instant before
the button arrived at the first step. This allows you to hold any speed between the low and the high speed.
If the hoist is operating at a speed that is less than high speed, and you wish it to operate at a faster speed,
press the button to the second step to accelerate the hoist. When you reach the desired speed, release the
button to the first step. Note that there is no deceleration function other than completely releasing the button. |
|
3–Step Infinitely Variable Control
Uses a 3-step button and a VFD to control the speed. This control is similar to the 2-Step Infinitely Variable
Control with the added feature of a deceleration function. If the hoist is operating at a particular speed and
you wish it to operate at a faster speed, press the button to the third step to accelerate. When you reach the
desired speed, release the button to the second step to maintain that speed. If the hoist is operating at a particular
speed and you want it to operate at a slower speed, release the button to the first step to decelerate. When you
reach the desired speed, press the button to the second step to maintain that speed. |
|
Electric Chain Hoists with Geared Trolley, Electric Hoist, Chain Hoist, Harrington Hoists, Push Trolley, Geared Trolley,
Single / Dual Speed Hoists, Pendant Controls, Electric Chain Hoists, and UL Listed Hoists from your source for material
handling equipment.
|
|
