World's First Effective Bump-N-Go Collision Protectors
Park Sentry® protects your business.
• Ideal for square or round columns • The only effective cushioning column protector on the market • Absorbs impact and returns to shape again and again
Park Sentry® parking collision protectors provide a new, attractive way to add a layer of effective protection around parking structure columns. These parking collision protectors add a soft, scratch-resistant layer of protection around concrete columns, protecting both columns and vehicles from collision damage. Easily applied with few or no tools, Park Sentry® increases the visibility of the column to help avoid collisions altogether with parking lot structures. With these parking collision protectors installed, vehicles can confidently park closer to the columns, virtually expanding the usable parking space.
Superior Material Protects Vehicles and Columns
Made of ARPRO®, a high-tech material specifically engineered to absorb impact • Modular design: pieces interlock to surround square and round columns • Thin design virtually adds space to parking structures – vehicles can now park closer to columns • Won't scratch automotive paint finishes • Oil, chemical, water and flame resistant and 100% recyclable
Park Sentry® Square
• Flat panel and corner system fits virtually any square or rectangular column • Default size fits 24" x 24"/61cm x 61cm column • Interlocks at corners for edge to edge protection • Specially designed flat panels give progressive resistance, offering soft protection for slight bumps and more resistance for harder collisions • Extra thickness at corners resists damage at most vulnerable spots • Cuts easily to fit around polls, pipes and curbs
Reduces Maintenance & Improves Appearance
• Hides damaged columns and walls without expensive paint job • Seamless design modernizes the look of any garage • Available in 2 standard colors: black & yellow Custom colors available upon request • Installs in minutes
Park Sentry® Square Kit includes: 4 planks, 4 corners, 8 interlocking keys and a set of straps
Park Sentry Square Installation
Custom fitting Park Sentry is very easy. Simply measure the column and size the planks to fit the column. The vertical ribs act as cutting guides and help to visually blend any transition between pieces.
For columns greater than 24" (61cm), extra planks can be used to add length. Each plank adds 17.25"(44cm) in length, or can be custom-cut to match your dimensions.
Install Park Sentry around a columnensuring the included key-locks, corners and planks are connected and placed around the column.
Corners and planks fit together seamlessly. Recessed grommet holes within the belt recesses on each piece allow for optional mechanical installation - hidden by the reflective straps.
Strap down for a finished appearance. The reflective straps tighten easily and create a seamless appearance around the column.
The straps provide a contrasting color to make the column more visible. Any excess strap length can be cut and/or tucked back behind the strap for a neat appearance.
Park Sentry® Round
Park Sentry® Round gives new shape to the Park Sentry lineup of parking protectors. The new round column protector product is designed to fit around virtually any sized round column, from small to extra large. Park Sentry Round is easily wrapped around columns and can be cut for smaller columns or extended for larger ones. The integrated tab and slot system allows the product to be linked together and cut exactly where needed to fit exactly around the column.
Park Sentry® Round kit includes: panels and straps
Park Sentry round is 34mm (1-1/3") thick and can be installed in single or multiple layers to increase the collision absorption to meet the need. The round column parking protector is available in two standard colors: yellow and black.
Park Sentry Round Installation
Park Sentry round installation is easy. Just follow the steps:
1. Measure the column.
2. Cut the Park Sentry panels if needed to fit the column. Cut the panel on the slot side to keep the tabs intact.
3. Connect panels, if necessary, using the integrated tabs and slots.
4. Wrap with the adjustable reflective straps and pull tight against the column. If using the locking cinch buckle, snap the lock shut.
Park Sentry® Wall System
The Park Sentry Wall System provides a tough layer of protection to walls vulnerable to vehicle collision damage. Easy to install, the wall system adheres to the space using pre-mounted wall clips. Park Sentry products combine the scratch resistant properties of surface protectors with energy absorbing materials to form a comprehensive damage reduction system.
Product Details
• Wall system panels are made of ARPRO® - the same high performance material used in automobile bumper systems • Easy to install. Adheres to the space using pre-mounted wall clips. • Panels are approximately 40" tall and 28" wide with cutting guides allow for error free down sizing. • Extensions are available to fit larger areas, making the Park Sentry Wall System adjusts to fit virtually any size wall. • Available in two standard colors – yellow and black. Can be mixed to create a color combination that increases visibility. Custom colors are available by request • Oil, chemical and water resistant. Can be made flame retarding. • 100% recyclable materials
Park Sentry® Wall system includes: 3 panels per per carton. Wall clips purchased separately.
The Park Sentry Wall System covers the impact area with a layer of energy-absorbing ARPRO® material, resulting in low or no damage to the wall or vehicles. Shown here using alternating black and yellow panels, this can be a highly visible barrier
Park Sentry® Wall System Installation
The Park Sentry Wall Clips are lightweight extruded polypropylene channels that are attached to the wall using standard fasteners (not included). The top rail of the channel includes a small groove intended to guide the fasteners and provide proper spacing.
Park Sentry Wall System uses this simple clip system to hold the Park Sentry Round panels firmly to a wall. The clips are continual and span the width of 2 panels. They are available in black only and ship 12 to a carton. The wall clips can be used to "box" the end of a run of panels, as in the photo here:
The Park Sentry Round panels connect to each other using an integrated tab and slot system, seen in this photo of the back (B) side. The Wall clips are attached top and bottom to hold firmly against a wall. These panels are available in yellow or black.
Order Online
Click the button of the item you wish to purchase.
Park Sentry Strap 158" Black Reflective Strap Lock Buckle (Set of 2)
2 lbs
$54.18
Park Sentry Square, Park Sentry Round, Park Sentry Wall System, Column Protectors, Bollards, Commercial Railing, Folding Gates, Guard Rails, Guardrail, Machine Guards, Rail, Protective Guards, Railing, and Traffic Barricade from your source for material handling equipment.
