• Disconnect switch. • Automatic fan delay circuit. • Automatic reset thermal limit. • Powder coated 18 gauge steel grill with extruded Aluminum front frame. • Steel block fin element. • Vane axial fan blade: 600 RPM motor; 175 CFM • Rough-in dimensions: 14 1/8" Wide x 19 1/2" High x 4" Deep • Grill dimensions: 15 29/32" Wide x 20 27/32" High • Built-In tamper proof thermostat. • Made in U.S.A.
Product Specifications
Heavy-Duty Forced Air wall heaters, where specified. The heaters shall be constructed of a heavy 18 gauge steel housing with an extruded Aluminum frame. The rough-in dimensions are 14 1/8" Wide x 19 ½" High x 4" deep. The units shall be available in ratings from 750 to 4800 Watts at 240, 208, and 277 Volts. The heaters shall have a low-speed 600 RPM, 4-pole motor which drives a vane axial blower to deliver a quiet 175 CFM of down flow air. The heating element shall be of the sealed tubular type with large, parallel steel fins for quick heat transfer. Unit shall have as a standard, a thermal overload cut-off for added safety, fan delay switch and built-in tamper proof thermostat which shall be calibrated to provide a range of 0°F. to 110°F. and manual disconnect switch. Optional accessories shall include a surface and semi-recess mounting adapter. All heaters shall be listed by ETL. The heating element shall be supplied with a manufacturer's 1-year limited warranty.
Order Online
Click the button of the item you wish to purchase.
IN-BUILT SINGLE POLE TAMPERPROOF THERMOSTAT (0º - 110º TEMPERATURE RANGE) FOR DOUBLE POLE THERMOSTAT REPLACE "T" IN MODEL NUMBER WITH "T2" -- Add $63.70
Commercial Fan Forced Wall Heaters, Fan Forced Wall Heaters, Heaters, Radiant Forced Heater, Electric Heater, Space Heaters, Ceramic Fan Forced Heater, Radiant Forced Heater, Electric Heater, Space Heaters, Portable Baseboard Heater, Ceramic Heaters, and Portable Fan Heaters from your source for material handling equipment.
