|
|
Load upright drum at floor level
|
|
Secure your drum in holder
|
|
Powered lift and rotate
|
 |
|
 |
|
|
|
|
 |
|
|
|
Load drum into the rotator with the
drum holder in the lowered position,
the hinged ratchet plate and the top
clamps both open. The Model 152
Drum Truck is shown loading the
drum into the rotator. Can also load
with Model 81 Drum Spotter or
Model 92 Below-Hook Drum
Lifter (inset). |
|
Secure drum in the rotator using the
cinch chain and ratchet, and
tightening the top clamps (inset). |
|
Turn the motor on to activate the
hydraulics. Raise the drum to the top
position by raising the TILT control
valve. To begin rotating, raise the
ROTATE control valve. |
|
|
|
|
|
|
|
|
* Half-full Capacity is an indication of the capacity for tilting an unbalanced,
bottom-heavy drum. A partially full drum with an unbalanced and shifting
load is harder to tilt than a full drum. |
|
|
|
CONTROL PACKAGES (sold separately)
|
|
|
|
|
|
|
|
|
Select the appropriate Control Package for each model, and your power supply. Use power controls to start and
stop drum rolling. The control mast can be positioned outside the Safety Enclosure on either the left or right side,
or at the back of Drum Tumbler. |
|
|
|
|
|
|
|
|
| AC Control Package (sold separately) NEMA 4/12 for NON-Hazardous Areas |
|
|
|
|
|
|
|
|
|
|
| Includes Control Box with: |
|
|
|
|
|
|
|
|
|
|
|
• Timer adjusts from a few seconds to 16 hours
• Start and Stop Buttons
• Red Emergency Stop Button
• Lockable Main Disconnect to shut off and lock
out power to the unit
• 24V DC Control Supply
• Wire terminals for external connection of safety
interlock switch |
|
 |
|
|
|
|
|
Explosion Proof AC Control Packages
NEMA 7/9 for Hazardous Areas
(sold separately)
|
|
|
| Includes Control Box with: |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
• Start and Stop Buttons
• Wire terminals for external connection
of safety interlock switch |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Control Package Information
|
|
Control Package No.
|
Control Package
For Model No.
|
Min Power
Supply
|
Power Supply
|
Shipping
Weight
|
|
CP-310-1-115*
|
310-1
|
30 Amp
|
1-Phase 115V 60Hz
|
40 lbs
|
|
CP-310-1-230*
|
310-1
|
15 Amp
|
1-Phase 230V 60Hz
|
40 lbs
|
|
CP-310-1-220-50
|
310-1-50
|
15 Amp
|
1-Phase 220V 50Hz
|
40 lbs
|
|
CP-310-3-230*
|
310-3
|
15 Amp
|
3-Phase 230V 60Hz
|
40 lbs
|
|
CP-310-3-460*
|
310-3
|
10 Amp
|
3-Phase 460V 60Hz
|
40 lbs
|
|
CP-310-3-230-50
|
310-3-50
|
10 Amp
|
3-Phase 230V 50Hz
|
40 lbs
|
|
CP-310-3-400-50
|
310-3-50
|
10 Amp
|
3-Phase 400V 50Hz
|
40 lbs
|
|
CP-310-3-575
|
310-3-575
|
10 Amp
|
3-Phase 575V 60Hz
|
40 lbs
|
|
CP-310-E1-115*
|
310-E1, Explosion-Proof
|
30 Amp
|
1-Phase 115V 60Hz
|
70 lbs
|
|
CP-310-E1-230*
|
310-E1, Explosion-Proof
|
15 Amp
|
1-Phase 230V 60Hz
|
70 lbs
|
|
CP-310-E1-220-50*
|
310-E1-50, Explosion-Proof
|
15 Amp
|
1-Phase 220V 50Hz
|
70 lbs
|
|
CP-310-E3-230*
|
310-E3, Explosion-Proof
|
15 Amp
|
3-Phase 230V 60Hz
|
70 lbs
|
|
CP-310-E3-230-50*
|
310-E3-50, Explosion-Proof
|
15 Amp
|
3-Phase 230V 50Hz
|
70 lbs
|
|
CP-310-E3-460*
|
310-E3, Explosion-Proof
|
10 Amp
|
3-Phase 460V 60Hz
|
70 lbs
|
|
CP-310-E3-400-50*
|
310-E3-50, Explosion-Proof
|
10 Amp
|
3-Phase 400V 50Hz
|
70 lbs
|
|
|
|
|
|
|
|
 |
|
| Air Controls are Included with Model 310-A |
|
|
| Air Controls Include: |
|
|
• Filter, Regulator and Lubricator (FRL)
• On / Off Valve |
|
|
|
|
|
Click the button of the item you wish to purchase. Contact us for special lengths
|
Model 310 Prices
|
| Note: Control Packages are sold separately. |
|
Model No.
|
RPM
|
Motor Style
|
Motor Information
|
Weight (lbs)
|
Price
|
Control Packages
|
|
HP
|
Phase
|
Motor
Voltage
|
Amp
Draw
|
Model No.
|
Price
|
|
|
5-20
|
60 Hz TEFC
|
2
|
1
|
115
|
23†
|
950
|
$16,614.00
|
|
$2,984.00
|
|
208/230
|
12/11.5
|
|
$3,399.00
|
|
|
4-16
|
50 Hz TEFC
|
2
|
1
|
220
|
9.7
|
950
|
$17,082.00
|
|
$3,744.00
|
|
|
5-20
|
60 Hz TEFC
|
2
|
3
|
208/230
|
6.2/5.8
|
950
|
$16,614.00
|
|
$3,393.00
|
|
460
|
2.9
|
|
$3,159.00
|
|
|
4-16
|
50 Hz TEFC
|
2
|
3
|
230
|
5.2
|
950
|
$16,380.00
|
|
$3,393.00
|
|
400
|
3
|
|
$3,393.00
|
|
|
5-20
|
60 Hz TEFC
|
2
|
3
|
575
|
2.2
|
950
|
$16,731.00
|
|
$4,095.00
|
|
|
5-20
|
60 Hz Explosion
Proof **
|
2
|
1
|
115
|
23†
|
1000
|
$18,369.00
|
|
$5,593.00
|
|
208/230
|
12/11.5
|
|
$5,476.00
|
|
|
4-16
|
50 Hz Explosion
Proof **
|
2
|
1
|
220
|
9.8
|
1000
|
$19,188.00
|
|
$5,476.00
|
|
208/230
|
5.5/5.2
|
|
$5,476.00
|
|
|
5-20
|
60 Hz Explosion
Proof **
|
2
|
3
|
460
|
2.6
|
1000
|
$18,252.00
|
|
$5,382.00
|
|
230
|
5.5
|
|
$5,558.00
|
|
|
4-16
|
50 Hz Explosion
Proof **
|
2
|
3
|
400
|
3.2
|
1000
|
$18,135.00
|
|
$5,967.00
|
|
|
5-20
|
AirMotor ***
|
-
|
-
|
-
|
-
|
950
|
$16,380.00
|
Air Controls Included***
|
-
|
|
* ONLY NON-Explosion Proof AC Control Packages include a pre-wired control box.
Explosion-proof Control Packages have no wiring from the NEMA 7/9 control box to the motor. Please consult an electrician to complete the wiring in accordance to local code.
** Explosion-proof motors are rated for Class I Group D, and Class II Groups F and G. |
*** Air powered model requires plant air at 50 to 60 PSI and flowing at a rate of 60 SCFM.
Filter, Regulator, Lubricator and valve are included with drum Tumbler model 310-A.
† Requires 30 Amp circuit, and can have amp spikes higher than that. |
|
 |
|
|
Enclosures with Safety Interlock for Tilt-To-Load Drum Tumblers
|
|
|
|
|
|
Help You Comply with OSHA Requirements
|
 |
|
|
(Drum Tumblers Sold Separately)
|
|
|
|
Enclosures for Tilt-To-Load Drum Rotators have
a safety interlock to automatically shut off the drum
roller when the gate is opened. Open the enclosure
gate, secure your upright drum on the base plate,
then close the gate to allow operation. An opening
in the side of the enclosure provides access to the
RAISE and ROTATE controls on the drum roller
with the drum safely enclosed. |
|
|
|
| Outside post-to-post Dimensions: L88" x W52" x H74" |
|
|
|
Install all Morse Drum Rotators in accordance with
OSHA requirements for enclosure and safety interlock,
etc. Drum roller automatically turns off when
enclosure door is opened. |
|
|
|
For OSHA compliance, see OSHA subpart
O.1910.212(a)(4) "Barrels, containers, and drums.
Revolving drums, barrels, and containers shall be
guarded by an enclosure which is interlocked with
the drive mechanism, so that the barrel, drum, or
container cannot revolve unless the guard enclosure
is in place." |
|
|
|
|
 |
Click the button of the item you wish to purchase. Contact us for special lengths
|
Rotator Model 310 Prices
|
|
Model No.
|
Fits Model No.
|
Gate Switch
|
Shipping Dimensions
|
Shipping Weight
|
Price
|
|
|
310-1, 310-1-50
|
AC
|
101"L x 31"W x 66"H
|
400 lbs
|
$4,932.00
|
|
|
310-3, 310-3-50, 310-3-575
|
AC
|
101"L x 31"W x 66"H
|
400 lbs
|
$4,932.00
|
|
|
310-E1, 310-E1-50
|
AC Exp. Proof
|
101"L x 31"W x 66"H
|
400 lbs
|
$5,616.00
|
|
|
310-E3, 310-E3-50, 310-E3-575
|
AC Exp. Proof
|
101"L x 31"W x 66"H
|
400 lbs
|
$5,616.00
|
|
|
310-A
|
Air Switch
|
101"L x 31"W x 66"H
|
400 lbs
|
$5,522.00
|
|
| *Explosion Proof rated for Class I Group D, and Class II Groups F and G |
|
Tilt-To-Load Drum Rotator, Morse Model 310, Mix, Blend, Tumble, Drum Dumpers, Drum Rotators, Dumpers, Barrel Dumpers,
Drum Handlers, Drum Handling, and Drum Lifting from your source for material handling equipment.
|
|
