Tilt-To-Load
Drum Tumblers with Automated Control Package
and Safety Enclosure
Automatically
lifts your drum, rotates it
for the time you set...
...then returns it to upright at floor-level
A
Tilt-To-Load Drum Tumbler with the advanced
Automated Control Package installed by Our technician, it
automatically lifts your drum, rotates for the time you set,
and then returns it to upright position at floor-level for easy
handling. The built-in safety interlock on the enclosure
automatically shuts off the drum rotator when the gate is
opened.
Load
your upright drum at floor
level with a drum truck or drum
lifter hoist attachment.
Set the desired time of drum
rotation anywhere from a few
seconds to 16 hours, push the
start button, and walk away.
You preset the tumbling speed
from 5 to 20 RPM.
The
enclosure has an integrated
safety interlock, in accordance
with OSHA requirements, so
the machine automatically shuts
off when the door is opened.
In
case of any problem during operation, the tumbler can be interrupted
by hitting the
red emergency stop knob.
Outside post-to-post dimensions: 88"L x 52"W x 74"H
Tumble
a steel, plastic or fiber drum from 29" to 37"
tall, and from 18" to 23.5" in diameter.
Install
all Our Rotators in accordance with OSHA
requirements for enclosure and safety interlock, etc.
so the rotator automatically turns off when enclosure
door is opened. One way to accomplish this is with
our enclosure with safety interlock.
For
OSHA compliance, see OSHA subpart
O.1910.212(a)(4) "Barrels, containers, and drums.
Revolving drums, barrels, and containers shall be
guarded by an enclosure which is interlocked with the
drive mechanism, so that the barrel, drum, or container
cannot revolve unless the guard enclosure is in place."
Tilt-To-Load
Drum Tumbler with Automated Control
Package and Safety Enclosure
Power
connections and motor controls must comply
with applicable codes.
Watch
Video Here
Order Online
Click the button of the item you wish to purchase.
Notes:
Guard Enclosure Kit ships in a second shipment with a separate
freight bill. Shipping Dimensions: Drum Tumbler - 77"L x 62"W x 62"H, 1136
lbs
Guard Enclosure - 101"L x 31"W x 66"H, 400
lbs
Drum Tumbler
with Automated Control Package, Tilt-To-Load Drum Tumbler
with Safety Enclosure, Barrel Tumbler, Drum
Rotator, Drum Rotation with Safety Enclosure, Tilt-To-Load
Barrel Rotator, Drum Handler, and Drum Handling from your
source for material handling equipment.
