309 SERIES DRUM TUMBLERS
|
 |
|
|
|
|
|
 |
• Thorough "corner-over-corner" mixing action • Saves time, labor and money • Use a separate drum for each batch |
• No container to purge between batches • Common drums make economical vessels |
|
|
|
|
 |
|
Model # 309-3 Drum Tumblr™ shown with Control Package Option # CP-309-3-230 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Tumble a closed plastic, steel, or fiber drum
|
|
|
|
|
|
|
|
| • Mix products inside a drum |
|
Load an upright drum with your hoist or crane |
Secure your drum in holder with web strap and two top clamps
|
|
|
29" to 37" (74 to 94 cm) tall 18" to 23.5" (46 to 60 cm) diameter |
|
|
|
|
|
|
|
|
|
|
|
|
 |
|
|
|
|
|
 |
|
| • Capacity: |
|
|
|
|
800 Lb. (363 kg) Full Drum 400 Lb. (181 kg) Half-Full Drum |
|
|
|
|
|
|
|
|
|
Half-full Capacity is an indication of the capacity for tilting an unbalanced, bottom- heavy drum. A partially full drum with an unbalanced and shifting load is harder to tilt than a full drum. |
|
|
|
|
|
|
Mixing in a Closed Drum Means Less Hazards |
|
|
|
Open the hinged ratchet plate and two top clamps, then load a drum into the tumbler with model 92 Below-Hook Drum Lifter and your hoist or crane. Or with your forklift, model 284 Fork Hook, and model 92 Below-Hook Drum Lifter (inset). |
|
|
|
|
|
|
Enjoy the benefits of mixing inside closed shipping drums. Eliminate worker exposure to dangerous ingredients, spills and risk of contamination. Mix right inside a sealed drum with a Morse Drum Tumblr™. |
|
Secure the drum in the tumbler using the web strap and ratchet around the drum, and tightening the two top clamps. Then turn the motor on to begin drum tumbling. |
|
|
|
|
|
|
|
|
|
|
|
|
|
| DIMENSIONS OF 309 SERIES DRUM TUMBLR™ |
|
 |
|
 |
|
|
OPTIONS
|
|
|
|
|
|
|
CONTROL PACKAGES (sold separately)
|
|
|
|
|
|
|
|
|
AC Control Packages NEMA 4/12 for NON-Hazardous Areas (sold separately)
|
|
Include a Control Mast and the appropriate Control Box for each model. Use power controls to start and stop drum tumbling. The control mast can be positioned outside the safety enclosure on either the left or right side, or at the back of Drum Tumbler. |
|
|
|
|
|
|
 |
|
|
|
|
|
Includes Control Mast and Control Box with: • Timer adjusts from a few seconds to 16 hours • Start and Stop Buttons • Variable Speed - Control drum rotation from 2 to 20 RPM • Red Emergency Stop Button • Lockable Fused Disconnect to shut off and lock out power to the unit • 24V DC Control Supply • Wire terminals for external connection of safety interlock switch |
|
|
|
|
Explosion Proof AC Control Packages NEMA 7/9 for Hazardous Areas (sold separately)
|
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
|
|
Includes Control Mast and Control Box with: • Start and Stop Buttons • Run / Jog Selector Switch |
|
|
|
|
|
|
Click the button of the item you wish to purchase. Contact us for special lengths
|
PRICING FOR DRUM TUMBLR™ 309 SERIES & CONTROL PACKAGE OPTIONS
|
|
Note: All Models have a Domestic Shipping Weight of 638 lbs and Domestic Shipping Dimensions of 72"L x 42"W x 46"H.
|
|
Model No.
|
Price
|
Motor Style
|
Phase
|
Motor Voltage
|
Hertz
|
Amp Draw
|
Drum RPM
|
Control Package Model No.
|
Price
|
|
|
$7,102.00
|
Inverter Duty
|
3
|
230, 460
|
50Hz, 60Hz
|
2.8
|
14 RPM Standard; 2 to 20 Variable RPM w/Control Package
|
|
$5,265.00
|
|
1.4
|
|
$5,265.00
|
|
|
$3,920.00
|
|
|
$5,265.00
|
|
|
$7,798.00
|
Explosion Proof **
|
1
|
115, 230
|
60Hz
|
13
|
14
|
|
$5,979.00
|
|
6.5
|
|
$5,733.00
|
|
|
$8,266.00
|
Explosion Proof **
|
1
|
110, 220
|
50Hz
|
6.2
|
12
|
|
$5,733.00
|
|
|
$8,325.00
|
Explosion Proof **
|
3
|
208, 230, 460
|
60Hz
|
3.8/3.6
|
14
|
|
$5,873.00
|
|
1.8
|
|
$5,873.00
|
|
|
$8,266.00
|
Explosion Proof **
|
3
|
230, 400
|
50Hz
|
3.45
|
12
|
|
|
|
2.2
|
|
1.8
|
|
|
$8,459.00 |
Explosion Proof **
|
3
|
575
|
60Hz
|
1.5
|
14
|
|
$5,873.00
|
|
|
$7,558.00 |
Air Motor ***
|
-
|
-
|
-
|
-
|
14 (Vary W/Air Flow & Pressure)
|
***
|
-
|
|
* ONLY NON-Explosion Proof AC Control Packages include a pre-wired control box. Models with explosion proof Control Packages have no wiring from the NEMA 7/9 control box to the motor. Please consult an electrician to complete the wiring in accordance to your local code. ** Explosion Proof motors on models 309-E1 and 309-E1-50 are rated for Class 1 Group D. Other Explosion Proof motors are rated for Class I Group D, and Class II Groups F and G. *** Air powered models require plant air at 40 to 60 psi and flowing at a rate of 40 scfm. Filter, Regulator, Lubricator and valve are included with Control package Option # CP-309-A. |
|
|
|
| Air Controls Include: |
|
|
 |
|
|
- Filter, Regulator and Lubricator (FRL) - On / Off Valve Air Powered Drum Tumbler (model 309-A) rotates a drum at 14 RPM and allows you to vary RPM with air flow and pressure. |
|
|
|
|
|
ENCLOSURES WITH SAFETY INTERLOCK
|
|
Comply with OSHA Requirements (Enclosure Kits Sold Separately)
|
|
|
|
 |
|
Enclosures for Morse Drum Tumblers have a safety interlock to automatically shut off the drum rotator when the gate is opened. Open the enclosure gate, place your drum onto the drum rotator, then close the gate to allow operation. Connections are included for air powered models only. Customer to provide controls and connections for 1-phase and 3-phase AC models. |
|
|
|
Install all Drum Rotators in accordance with OSHA requirements for enclosure and safety interlock, etc. Drum rotator automatically turns off when enclosure door is opened. For OSHA compliance, see OSHA subpart O.1910.212(a)(4) "Barrels, containers, and drums. Revolving drums, barrels, and containers shall be guarded by an enclosure which is interlocked with the drive mechanism, so that the barrel, drum, or container cannot revolve unless the guard enclosure is in place." Power connections and motor controls must comply with applicable codes. |
|
|
 |
|
|
|
|
Sold as Three Separate Parts: 1. Drum Tumbler 2. Control Package 3. Enclosure with Safety Interlock Enclosure outside post-to-post dimensions: L76" x W52" x H63.25" (193 x 132 x 161 cm) |
|
 |
Click the button of the item you wish to purchase. Contact us for special lengths
|
PRICING FOR ENCLOSURES WITH SAFETY INTERLOCK MODELS
|
|
Model No.
|
Description (Drum Roller Sold Separately)
|
Gate Switch
|
Domestic Shipping Weight
|
Domestic Shipping Dimensions
|
Price
|
|
|
Fits model 309-3 Drum Tumbler
|
AC
|
400 lbs
|
101"L x 31"W x 66"H
|
$4,446.00
|
|
|
Fits model 309-E1 or 309-E1-50 Drum Tumbler
|
AC
|
400 lbs
|
101"L x 31"W x 66"H
|
$5,125.00
|
|
|
Fits model 309-E3 or 309-E3-50 Drum Tumbler
|
AC
|
400 lbs
|
101"L x 31"W x 66"H
|
$5,125.00
|
|
|
Fits model 309-A Drum Tumbler
|
Air
|
400 lbs
|
101"L x 31"W x 66"H
|
$5,031.00
|
|
|
Drum Tumblers, Drum Rotators, Dumpers, End-Over-End Rotator, Mixing, Morse Model 309, Mix, Blend, Tumble, Barrel Dumpers, Drum Handlers, Drum Handling, and Drum Lifting from your source for material handling equipment.
|
|