 |
|
T-1 SERIES - 1000
|
|
For door openings up to 8' wide x 8' high with level driveway
|
|
|
|
|
|
|
|
|
|
|
Foam Dock Seals
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Construction |
|
|
Polyfoam Core |
|
 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Bondor foam dock seals are constructed
of the finest materials and assembled to
give you years of dependable service. |
|
Insulating polyurethane foam conforms
to the shape of the truck to form a tight
weatherseal. |
|
|
|
|
|
|
|
|
|
|
|
Single Layer Face |
|
|
|
|
|
|
|
Galvanized Hardware |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
All Bondor Foam Seals are provided
with appropriate galvanized mounting
hardware. |
|
|
Mounting Board |
|
|
|
|
Our foam core is bonded to a kiln-dried
pressure treated 2" thick wood backboard
for an easy, long-lasting installation. |
|
|
|
|
|
|
|
|
Closed Bottoms |
|
|
|
|
|
|
|
|
|
|
Permanent Guide Stripe |
|
|
Covered vents to allow air to escape
during compression of the seal, reducing
the amount of stress on the vinyl fabric. |
|
|
A 4" wide contrasting guide stripe is
sewn on. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Rugged Vinyl Cover |
|
|
Full Width Header |
|
|
|
|
|
|
Top quality abrasion resistant 22 oz. vinyl
coated polyester fabric is used to cover
our standard seals. A 40 oz. polyester
reinforced vinyl material is used on our
heavy duty seals. |
|
|
Our header pad completely covers both
sides to prevent rain from entering your
dock area along the side pads. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Color |
|
|
Standard colors are black with a yellow guide stripe. Other colors
available upon request.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
|
 |
|
|
|
|
|
|
|
 |
|
|
|
|
|
|
|
|
|
|
|
Top View
|
|
|
|
|
Square side pad cross section shown above -
recommended design for door widths 7' 4" or less.
|
|
|
|
|
|
|
|
|
|
|
|
 |
|
|
|
|
|
|
|
|
|
|
|
Top View
|
|
|
|
|
|
Beveled* side pad cross section shown above -
recommended design for 8' wide doors.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Truck Bumpers Required
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Front View
|
|
|
Side View
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
*Beveled side pads allow seal to be mounted with backboard flush with door opening. Eliminates forklift damage to backboard.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
To order a series T-1 Dock Seal:
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| 1. |
Select a dock seal projection by adding 4" to 6" to your combined existing setback and dock bumper projection. (See sketch) If there is no existing bumper or setback dimension, select the 10" projection.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| 2. |
Select square or beveled sidepads. (Beveled pads are recommended for door openings wider than 7' 4".) |
|
|
|
|
|
|
|
|
|
|
|
|
|
| 3. |
Select the desired model # from the price chart such as T-1/P10/B12-8/STD and add the actual dock door opening
size to complete the model #. Example: T-1/P10/B12-8/STD/8'W x 8'H. This model would specify a T-1 Dock Seal
with a 10" projection with beveled side pads 12" wide at face and 8" wide at back with standard vertical side pads for
a door opening of 8' W x 8' H. |
|
|
|
|
|
|
|
|
|
|
|
|
|
| 4. |
Add desired special options from below - wear pleats, valance curtain and wide face header pads. |
|
|
|
|
|
|
|
|
|
|
|
|
|
| 5. |
Remember to order 2 dock bumpers per seal from our bumpers section if they are not existing. |
|
|
|
|
|
|
|
|
|
|
|
|
|
| 6. |
We invite you to let our engineers review your dock seal application. Complete the truck dock dimension sheet on our
contact page and we will confirm your dock seal selection. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
|
 |
Click the button of the item you wish to purchase. Contact us for special lengths
|
|
Table A: Basic T-1 Series Pricing - use tables B & C (shown below) for optional wear pleats
|
Dock Seal
Projection
From Building |
Side Pad
Crossection |
Recommended Dock Bumper
Projection (order seperately)
from Our Dock Bumper Pages |
Std. Duty T-1 Dock Seal - add door width x door height to base model # below |
Std T-1 Dock
Seal Price |
| *10" |
Beveled |
4 1/2"- #B4510-14 |
|
$1,012.00
|
| 10" |
Square |
4 1/2"- #B4510-14 |
|
$1,012.00
|
| *12" |
Beveled |
6"- #B610-14 |
|
$1,066.00
|
| 12" |
Square |
6"- #B610-14 |
|
$1,066.00
|
| 14" |
Beveled |
9" - #B910-14 |
|
$1,175.00
|
| 14" |
Square |
9" - #B910-14 |
|
$1,175.00
|
| 16" |
Beveled |
10 1/2" - #B10510-14 |
|
$1,285.00
|
| 16" |
Square |
10 1/2" - #B10510-14 |
|
$1,285.00
|
| 18" |
Beveled |
12" - #B1210-14 |
|
$1,393.00
|
| 18" |
Square |
12" - #B1210-14 |
|
$1,393.00
|
| 20" |
Beveled |
14" - contact us |
|
$1,503.00
|
| 20" |
Square |
14" - contact us |
|
$1,503.00
|
| 22" |
Beveled |
16" - contact us |
|
$1,611.00
|
| 22" |
Square |
16" - contact us |
|
$1,611.00
|
|
Click the button of the item you wish to purchase. Contact us for special lengths
|
|
|
|
|
 |
|
|
|
Optional Wear Pleats/Surfaces (use charts below) |
|
|
 |
|
|
|
|
|
40 oz. wear pleat surfaces for the
full length of the side pads provide
maximum wear and abrasion
resistance. Available in 4" or 8"
exposure. |
|
|
|
|
|
|
|
NOTE: Each seal ordered with
wear pleats includes pleats on
head pad. |
|
|
|
|
|
|
|
8" pleat exposure shown
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
8" pleat exposure
shown here
|
|
4" pleat exposure
shown here
|
|
|
|
|
|
|
|
|
|
|
|
Table B: T-1 Series Pricing with Optional Wear Pleat Surface - 8" exposure
|
Dock Seal
Projection
From Building |
Side Pad
Crossection |
Recommended Dock Bumper
Projection (order seperately) from
Our Dock Bumper Pages |
T-1 Standard Seal with Optional Wear
Pleat Surface - 8" Exposure - add door
width x door height to model # below |
Price with
8" Exposure
Pleat |
| 10" |
Beveled |
4 1/2"- #B4510-14 |
|
$1,330.00
|
| 10" |
Square |
4 1/2"- #B4510-14 |
|
$1,330.00
|
| 12" |
Beveled |
6"- #B610-14 |
|
$1,386.00
|
| 12" |
Square |
6"- #B610-14 |
|
$1,386.00
|
| 14" |
Beveled |
9" - #B910-14 |
|
$1,494.00
|
| 14" |
Square |
9" - #B910-14 |
|
$1,494.00
|
| 16" |
Beveled |
10 1/2" - #B10510-14 |
|
$1,606.00
|
| 16" |
Square |
10 1/2" - #B10510-14 |
|
$1,606.00
|
| 18" |
Beveled |
12" - #B1210-14 |
|
$1,715.00
|
| 18" |
Square |
12" - #B1210-14 |
|
$1,715.00
|
| 20" |
Beveled |
14" - contact us |
|
$1,823.00
|
| 20" |
Square |
14" - contact us |
|
$1,823.00
|
| 22" |
Beveled |
16" - contact us |
|
$1,933.00
|
| 22" |
Square |
16" - contact us |
|
$1,933.00
|
|
Click the button of the item you wish to purchase. Contact us for special lengths
|
|
Table C: T-1 Series Pricing with Optional Wear Pleat Surface - 4" exposure
|
Dock Seal
Projection
From Building |
Side Pad Crossection |
Recommended Dock Bumper Projection (order seperately) from Our Dock Bumper Pages |
T-1 Standard Seal with Optional Wear Pleat Surface 4" Exposure - add door width x door height to model # below |
Price with 4" Exposure Pleat |
| 10" |
Beveled |
4 1/2"- #B4510-14 |
|
$1,503.00
|
| 10" |
Square |
4 1/2"- #B4510-14 |
|
$1,503.00
|
| 12" |
Beveled |
6"- #B610-14 |
|
$1,557.00
|
| 12" |
Square |
6"- #B610-14 |
|
$1,557.00
|
| 14" |
Beveled |
9" - #B910-14 |
|
$1,667.00
|
| 14" |
Square |
9" - #B910-14 |
|
$1,667.00
|
| 16" |
Beveled |
10 1/2" - #B10510-14 |
|
$1,775.00
|
| 16" |
Square |
10 1/2" - #B10510-14 |
|
$1,775.00
|
| 18" |
Beveled |
12" - #B1210-14 |
|
$1,886.00
|
| 18" |
Square |
12" - #B1210-14 |
|
$1,886.00
|
| 20" |
Beveled |
14" - contact us |
|
$1,994.00
|
| 20" |
Square |
14" - contact us |
|
$1,994.00
|
| 22" |
Beveled |
16" - contact us |
|
$2,104.00
|
| 22" |
Square |
16" - contact us |
|
$2,104.00
|
|
Click the button of the item you wish to purchase. Contact us for special lengths
| SPECIAL OPTIONS: |
|
|
|
|
|
|
|
|
|
|
To order any of the special options add the model # suffix desired to the base model # selected from the T-1 Series
Dock Seal charts above. Example: T-1/P10/B12-8/STD/8'W x 8'H-WFHP18 |
|
|
|
|
|
|
|
 |
|
|
|
Weighted Valance Curtain reduces top
gap when low trucks are frequently docked -
curtain hangs between side pads. |
|
|
|
|
|
|
|
|
|
|
|
|
Model Number
Suffix |
Drop |
Price |
|
|
15" drop
|
$149.00
|
|
|
30" drop
|
$209.00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
|
|
Wide Face Header Pad (wider than STD
12") - For docks which service a broader
range of truck heights. |
|
|
|
|
|
|
|
|
|
|
|
|
|
| Model Number Suffix |
Header Pad Face Width |
Price |
|
|
14" |
$198.00
|
|
|
16" |
$214.00
|
|
|
18" |
$225.00
|
|
|
|
|
|
|
|
|
|
|
|
|
| ARCHITECTURAL SPECIFICATIONS - Model T-1 Standard Foam Seal |
|
| Truck Dock Seals |
|
Truck dock seals shall be as manufactured by the Bondor Division of FS Industries, W. Greenwich, RI, to fit a door
opening of 8' wide x 8' high. |
|
| Construction |
|
|
Pads to have a polyurethane foam core bonded to a 2" x 12" kiln dried pressure treated wood backboard to give
a finished projection of ______________. Side pads to have 4" wide contrasting guide stripe sewn on. Bottom
of pads to have 3" upward taper to prevent pinching between truck and bumpers. Bottom of pads to be closed
with covered side vents to allow air during compression and to prevent condensation. Header pad shall
be sized to fit over (not between) side pads to prevent water from entering along the side pads. Header to breathe
through grommets on underside of pad.
|
|
| Cover Material |
|
| Pads to be wrapped with 22 oz. vinyl coated polyester. |
|
Bondor, Dock Door Loading Seal, Dock Door Seals, Foam Dock Seals, Foam Truck Dock Seals, Dock Seals, Loading Dock Door Seals, Loading Dock Seals, and Wear Pleats from your source for material handling equipment.
|
|
