Bondor edge-of-dock
levelers have a low initial cost - even
lower than a comparably rated portable plate. Maintenance
is seldom required. They're ideal for retrofit. No pit is
necessary. They're tough, highly efficient, easy and safe
to
operate.
Bumper Projection
= 15"
Secondary
gussets for added strength and
extended life.
Heavy Duty Bumper Blocks with 4" x 12" x 13"
Tuf-Cord bumpers.
Various Bondor
edge-of-dock models differ primarily by the
lift mechanism used. Each is offered in two standard widths
and conservatively rated capacities of 20000 and 25000 lb.
You'll
not find and edge-of-dock leveler that's stronger. Or
that comes with a stronger heritage.
DL
115X in up position
Total
projection of bumper blocks and bumpers is 15" on mechanical
units.
GENERAL
DESCRIPTION
INSTALLATION
Bondor
edge-of-dock levelers mount to dock face and
provide a working range of 5" above to 5" below dock.
The units are offered with mechanical or hydraulic
operation.
For
an existing dock without a minimum 8" channel, an
optional ramp approach plate or formed angle from
Bondor is highly recommended. For new construction,
the leveler should be welded to a dock edge channel
which is embedded in concrete and secured by anchoring
hooks as shown. Installation drawings are available.
Deck
and lip are constructed with high-strength steel
safety tread plate, 5500 psi (or better) minimum yield.
Extended life bumpers are molded of first quality rubber.
Bumper blocks are 5/16" steel with a full length,
reinforcing center gusset. Long life hinges include grease
fittings throughout.
MECHANICALLY-OPERATED
MODELS
Bondor's
mechanically-operated edge-of-dock levelers are
the largest selling edge-of-dock levelrs in the industry. Our
dual extension spring lift mechanism offers proven efficiency
and durability. Careful engineering and rugged construction
ensure extended life. Operation is safe and easy.
SIMPLE
MAINTENANCE AND ADJUSTMENTS
SIZE
SELECTIONS
Properly
installed and operated, periodic lubrication is
the only routine maintenance. On mechanical models,
counterbalance is easily adjustable via nuts located on
the lifting mechanism.
Bondor's
edge-of-dock levelers are offered in a variety
of sizes to accommodate your specific application.
Order Online
Click the button of the item you wish to purchase.
DLM, Dock Leveler,
Dock Levelers, Edge Of Dock Leveler, Edge Of Dock Levelers,
Loading Dock Leveler, Loading Dock Levelers,
Mechanical Dock Leveler, and Mechanical Dock Levelers from
your complete source for material handling equipment.
Dual
extension spring lift mechanism.
