5PA5 / 5PA10 ENSIGN SERIES
|
|
|
|
|
 |
|
|
|
|
500 lb and
1200 LB Capacity
Portable Davit Cranes |
|
|
|
|
|
• Light and portable
• Adjustable Boom Angle
• Adjustable Sheave Block
• Quick-Mount Winch Bracket
• Roller Bearing for Easy 360° Rotation
• Manual or Power Winch Operation
• Five Corrosion-Resistant Finishes
• Easy, No-Tools Assembly/Disassembly
• Variety of Bases
• 2-Year Warranty |
|
|
|
|
The Ensign series portable davit cranes are ideal for many
applications. Simple set-up and easy to use. This economical series
is specially designed for clearance, lift height, and ergonomic operation. |
|
|
|
|
|
|
|
|
SERIES FEATURES
|
|
 |
|
ADJUSTABLE SHEAVE BLOCK
Sheave easily adjusts without tools to 4
different positions allowing for a wide range
of height and reach combinations.
|
|
|
ADJUSTABLE BOOM ANGLE
Convenient stainless steel adjustment screw,
with comfortable turning knob, allows for
easy, one-hand boom adjustment when not
under load.
|
|
|
QUICK-MOUNT WINCH BRACKET
A variety of winches can be attached
to the bracket. After a winch is attached to
the bracket, the bracket is easily mounted
(without tools) to any of three convenient/
ergonomic positions on the mast
via quick-connect pins.
|
|
|
NYLATRON FLANGE BEARING
The Ensign 500 features a nylatron bearing
that supports the mast at the top of the base
to assist with the crane’s
360° smooth rotation.
|
|
|
TAPERED ROLLER BEARING
A tapered roller bearing, pinned to the bottom
of the mast, allows the crane to rotate 360°
under load. Standard only on the Ensign 500.
|
|
|
ROLLER/BALL BEARING*
Standard on Ensign 1000, the specially
designed roller/ball bearing at top of base
requires no tools for installation.
Allows smooth, easy 360°
crane rotation under load.
|
|
|
STAINLESS STEEL LOCK*
Stainless steel lock assembly keeps crane
in position during winch operation and when
not in use. Included with roller/ball bearing.
|
|
|
|
FEATURES AND BENEFITS
|
|
|
TRADITIONAL FEATURES |
|
 |
|
MANUAL OR POWER operation davit
cranes can be configured with a manual winch
for short, infrequent lifts or a power winch for
longer lifts or heavier loads. Choose from spur
or worm gear hand winches or power winches
with 115/1/60 as standard. Other voltages
available as well as pneumatic, hydraulic or
DC Volt power operation. |
|
|
|
|
CORROSION RESISTANT FINISH
Electrostatic powder coated crane and
stainless steel fasteners combine to resist
corrosion in harsh environments. Other
options available include: galvanized,
stainless steel and epoxy finishes. |
|
|
|
|
EASY ASSEMBLY/DISASSEMBLY
Quick-release stainless steel pins allow for
easy assembly and quick disassembly for
transport or storage. No tools required. |
|
|
|
|
QUICK DISCONNECT ANCHOR
For quickly attaching or removing wire rope
equipped with a swaged ball fitting - Allows
the operator to leave the wire rope attached
to the load at all times and simply remove
the rope from the winch and attached to the
optional wire rope keeper or cable reel. |
|
|
|
|
VARIETY OF BASES
Pedestal, flush and wall mount bases allow
for a variety of mounting solutions and are
easily installed to a variety of solid surfaces
with anchor bolts or other fastening methods.
Bases sold separately. Base cap included
with lanyard keeps water and debris out of
base when crane is removed. |
|
|
 |
|
2 -YEAR WARRANTY
Industry-leading two-year limited
warranty on all our products. |
|
Click the button of the item you wish to purchase. Contact us for special lengths
| FINISHES |
|
|
|
| Finishes for Ensign Series Cranes |
|
|
|
All cranes come standard with Electrostatic Powder Coat red finish. Four optional finishes also offered are
Galvanized, 304 or 316 Stainless Steel, and corrosion-resistant Gray Epoxy. Custom colors are available per
customer request -please contact us. |
|
|
 |
|
|
|
CRANE PRICING
|
|
|
Model No.
|
Description
|
Weight
|
Price
|
|
5PA5 Series - 500 lb Capacity
|
|
|
crane only, red powder coat
|
65 lbs
|
$1,204.00
|
|
|
crane only, galvanized
|
65 lbs
|
$1,639.00
|
|
|
crane only, 304 stainless steel
|
65 lbs
|
$2,231.00
|
|
|
crane only, 316 stainless steel
|
65 lbs
|
$3,435.00
|
|
|
crane only, gray epoxy
|
65 lbs
|
$1,505.00
|
|
5PA10 Series - 1,200 lb Capacity
|
|
|
crane only, red powder coat
|
143 lbs
|
$1,935.00
|
|
|
crane only, galvanized
|
143 lbs
|
$2,634.00
|
|
|
crane only, 304 stainless steel
|
143 lbs
|
$3,580.00
|
|
|
crane only, 316 stainless steel
|
143 lbs
|
$5,515.00
|
|
|
crane only, gray epoxy
|
143 lbs
|
$2,419.00
|
|
|
WINCHES PRICING
|
|
|
| Hand Winches |
|
 |
Click the button of the item you wish to purchase. Contact us for special lengths
|
|
Model No.
|
Description
|
Weight
|
Price
|
|
5PA5 Series - 500 lb Capacity
|
|
|
spur gear hand winch only, zinc plated
|
17 lbs
|
$535.00
|
|
|
worm gear hand winch only, red powder coat
|
42 lbs
|
$1,500.00
|
|
|
worm gear hand winch only, epoxy gray
|
42 lbs
|
$1,897.00
|
|
|
spur gear hand winch only, stainless steel
|
24 lbs
|
$1,360.00
|
|
5PA10 Series - 1,200 lb Capacity
|
|
|
spur gear hand winch only, zinc plated
|
17 lbs
|
$914.00
|
|
|
worm gear hand winch only, red powder coat
|
42 lbs
|
$1,500.00
|
|
|
worm gear hand winch only, epoxy gray
|
42 lbs
|
$1,897.00
|
|
|
spur gear hand winch only, stainless steel
|
24 lbs
|
$1,828.00
|
|
| Electric Winches |
|
 |
Click the button of the item you wish to purchase. Contact us for special lengths
|
|
Model No.
|
Description
|
Weight
|
Price
|
|
5PA5 Series & 5PA10 Series
|
|
|
electric winch (115/1/60 VAC) with 6ft pendant control, enamel
|
85 lbs
|
$3,526.00
|
|
|
electric winch (115/1/60 VAC) with 6ft pendant control, epoxy gray
|
85 lbs
|
$4,445.00
|
|
|
electric winch (115/1/60 VAC) with 6ft pendant control, enamel
|
110 lbs
|
$4,010.00
|
|
|
electric winch (115/1/60 VAC) with 6ft pendant control, epoxy gray
|
110 lbs
|
$5,058.00
|
|
|
electric winch (12 volt DC) with 10ft pendant control, enamel
|
105 lbs
|
$5,585.00
|
|
|
electric winch (12 volt DC) with 10ft pendant control, epoxy gray
|
105 lbs
|
$7,041.00
|
|
|
|
BASES (sold separately)
|
|
Select the appropriate base(s) for your application from the chart below. Matching your crane with multiple
bases provides optimal worksite flexibility and an economical solution for servicing multiple lift stations. |
 |
Click the button of the item you wish to purchase. Contact us for special lengths
|
>
|
Model No.
|
Description
|
Weight
|
Price
|
Model No.
|
Description
|
Weight
|
Price
|
|
5PA5 Series
|
5PA10 Series
|
|
Pedestal Base - Upright Mount
|
|
|
Powder Coat
|
20 lbs
|
$281.00
|
|
Powder Coat
|
52 lbs
|
$563.00
|
|
|
Galvanized
|
20 lbs
|
$382.00
|
|
Galvanized
|
52 lbs
|
$769.00
|
|
|
304 Stainless Steel
|
20 lbs
|
$576.00
|
|
304 Stainless Steel
|
52 lbs
|
$1,156.00
|
|
|
316 Stainless Steel
|
20 lbs
|
$871.00
|
|
316 Stainless Steel
|
52 lbs
|
$1,747.00
|
|
|
Gray Epoxy
|
20 lbs
|
$352.00
|
|
Gray Epoxy
|
52 lbs
|
$704.00
|
|
Socket Base - Flush Mount
|
|
|
Powder Coat
|
20 lbs
|
$223.00
|
|
Powder Coat
|
44 lbs
|
$388.00
|
|
|
Galvanized
|
20 lbs
|
$303.00
|
|
Galvanized
|
44 lbs
|
$528.00
|
|
|
304 Stainless Steel
|
20 lbs
|
$457.00
|
|
304 Stainless Steel
|
44 lbs
|
$801.00
|
|
|
316 Stainless Steel
|
20 lbs
|
$690.00
|
|
316 Stainless Steel
|
44 lbs
|
$1,204.00
|
|
|
Gray Epoxy
|
20 lbs
|
$278.00
|
|
Gray Epoxy
|
44 lbs
|
$486.00
|
|
Wall Mount
|
|
|
Powder Coat
|
22 lbs
|
$457.00
|
|
Powder Coat
|
48 lbs
|
$642.00
|
|
|
Galvanized
|
22 lbs
|
$621.00
|
|
Galvanized
|
48 lbs
|
$876.00
|
|
|
304 Stainless Steel
|
22 lbs
|
$941.00
|
|
304 Stainless Steel
|
48 lbs
|
$1,317.00
|
|
|
316 Stainless Steel
|
22 lbs
|
$1,419.00
|
|
316 Stainless Steel
|
48 lbs
|
$1,994.00
|
|
|
Gray Epoxy
|
22 lbs
|
$572.00
|
|
Gray Epoxy
|
48 lbs
|
$806.00
|
|
Base Extension
|
|
|
Powder Coat
|
17 lbs
|
$374.00
|
|
Powder Coat
|
33 lbs
|
$401.00
|
|
|
Galvanized
|
17 lbs
|
$510.00
|
|
Galvanized
|
33 lbs
|
$546.00
|
|
|
304 Stainless Steel
|
17 lbs
|
$769.00
|
|
304 Stainless Steel
|
33 lbs
|
$822.00
|
|
|
316 Stainless Steel
|
17 lbs
|
$1,161.00
|
|
316 Stainless Steel
|
33 lbs
|
$1,247.00
|
|
|
Gray Epoxy
|
17 lbs
|
$468.00
|
|
Gray Epoxy
|
33 lbs
|
$502.00
|
|
|
| LIMIT SWITCH READY WINCH OPTION |
|
|
|
 |
|
Limit switch winch option requires purchase
of Limit Switch and Headache Ball
(sold separately- see bottom of page) |
|
|
|
|
|
 |
|
|
|
|
|
Click the button of the item you wish to purchase. Contact us for special lengths
|
|
Model No.
|
Description
|
Weight
|
Price
|
|
|
electric winch (115/1/60 VAC) with 6 ft pendant control, enamel
|
90 lbs
|
$3,967.00
|
|
|
electric winch (115/1/60 VAC) with 6 ft pendant control, epoxy gray
|
90 lbs
|
$4,881.00
|
|
|
electric winch (115/1/60 VAC) with 6 ft pendant control,enamel
|
115 lbs
|
$4,456.00
|
|
|
electric winch (115/1/60 VAC) with 6 ft pendant control, epoxy gray
|
115 lbs
|
$5,499.00
|
|
|
electric winch (12 volt DC) with 10 ft pendant control, enamel
|
110 lbs
|
$6,042.00
|
|
|
electric winch (12 volt DC) with 10 ft pendant control, epoxy gray
|
110 lbs
|
$7,493.00
|
|
|
|
WIRE ROPE Assembly (sold separately)
|
|
|
|
|
 |
|
Click the button of the item you wish to purchase. Contact us for special lengths
|
Model No.
|
Wire Rope Diameter and Length
|
Weight
|
Prices
|
|
Galvanized Aircraft Cable With Swivel Hook and Swaged Ball Fitting
|
|
|
3/16 in x 20 ft
|
3 lbs
|
$159.00
|
|
|
3/16 in x 28 ft
|
4 lbs
|
$167.00
|
|
|
3/16 in x 36 ft
|
4 lbs
|
$172.00
|
|
|
3/16 in x 45 ft
|
7 lbs
|
$199.00
|
|
|
1/4 in x 20 ft
|
4 lbs
|
$172.00
|
|
|
1/4 in x 28 ft
|
5 lbs
|
$177.00
|
|
|
1/4 in x 36 ft
|
6 lbs
|
$191.00
|
|
|
1/4 in x 45 ft
|
7 lbs
|
$217.00
|
|
|
1/4 in x 60 ft
|
9 lbs
|
$244.00
|
|
|
1/4 in x 75 ft
|
11 lbs
|
$282.00
|
|
304 Stainless Steel Wire Rope With SS Swivel Hook and Swaged Ball Fitting
|
|
|
3/16 in x 20 ft
|
3 lbs
|
$270.00
|
|
|
3/16 in x 28 ft
|
3 lbs
|
$282.00
|
|
|
3/16 in x 36 ft
|
4 lbs
|
$302.00
|
|
|
3/16 in x 45 ft
|
7 lbs
|
$323.00
|
|
|
3/16 in x 60 ft
|
9 lbs
|
$360.00
|
|
|
3/16 in x 75 ft
|
11 lbs
|
$405.00
|
|
|
1/4 in x 20 ft
|
5 lbs
|
$360.00
|
|
|
1/4 in x 28 ft
|
5 lbs
|
$381.00
|
|
|
1/4 in x 36 ft
|
6 lbs
|
$393.00
|
|
|
1/4 in x 45 ft
|
7 lbs
|
$458.00
|
|
|
1/4 in x 60 ft
|
9 lbs
|
$543.00
|
|
|
1/4 in x 75 ft
|
11 lbs
|
$608.00
|
|
Winches and cranes are sold without wire rope. However, we carry top quality wire rope assemblies optimally designed for use
with our winches and cranes. The assemblies above are equipped with a swaged ball fitting and swivel hook (Enamel w/Galvanized
rope or Stainless Steel with SS rope)
*Based on 3.5:1 design factor NOTE: 1/8" wire rope is available with a reduced load rating. Please contact us. |
|
|
ENSIGN 500 PERFORMANCE
|
| Ensign 500 Lift Below Floor² Level |
 |
|
Lift Below¹Floor
|
Wire Rope Diameter
|
Wire Rope Length
|
Winch Configurations
|
|
Minimum (C)
|
Maximum (A)
|
|
M1
|
M2
|
M3
|
E2
|
E4
|
|
(ft)
|
(m)
|
(ft)
|
(m)
|
(in)
|
(mm)
|
(ft)
|
(m)
|
|
|
6
|
1.8
|
9
|
2.7
|
3/16
|
5
|
20
|
6
|
x
|
-
|
x
|
-
|
x
|
|
14
|
4.2
|
17
|
5.1
|
3/16
|
5
|
28
|
8.5
|
x
|
-
|
x
|
-
|
x
|
|
22
|
6.7
|
25
|
7.6
|
3/16
|
5
|
36
|
10.9
|
x
|
-
|
x
|
-
|
x
|
|
31
|
9.4
|
34
|
10.3
|
3/16
|
5
|
45
|
13.7
|
x
|
-
|
x
|
-
|
x
|
|
46
|
14
|
49
|
14.9
|
3/16
|
5
|
60
|
18.2
|
-
|
-
|
x
|
-
|
x
|
|
61
|
18.5
|
64
|
19.5
|
3/16
|
5
|
75
|
22.8
|
-
|
-
|
x
|
-
|
x
|
|
76
|
23.1
|
79
|
24
|
3/16
|
5
|
90
|
27.4
|
-
|
-
|
x
|
-
|
x
|
|
6
|
1.8
|
9
|
2.7
|
1/4
|
6
|
20
|
6
|
-
|
x
|
x
|
x
|
x
|
|
14
|
4.2
|
17
|
5.1
|
1/4
|
6
|
28
|
8.5
|
-
|
x
|
x
|
x
|
x
|
|
22
|
6.7
|
25
|
7.6
|
1/4
|
6
|
36
|
10.9
|
-
|
x
|
x
|
x
|
x
|
|
31
|
9.4
|
34
|
10.3
|
1/4
|
6
|
45
|
13.7
|
-
|
x
|
x
|
x
|
x
|
|
46
|
14
|
49
|
14.9
|
1/4
|
6
|
60
|
18.2
|
-
|
x
|
-
|
x
|
x
|
|
61
|
18.5
|
64
|
19.5
|
1/4
|
6
|
75
|
22.8
|
-
|
x
|
-
|
x
|
x
|
|
|
|
|
|
|
 |
|
|
|
|
|
¹ Lift below floor level varies depending on boom position and base configuration. For longer lifts, please contact us.
² Performance Characteristics are for standard products referred to in this manual. Non-standard products may vary from the original
design. Contact us for this information.
³ Wire rope assemblies include a hood and a swaged ball fitting to work with quick disconnect anchor on winches, cable spooler and
wire rope keeper. 316SS wire rope is also available. Please contact us. |
|
|
|
|
|
|
IMPORTANT:
|
|
It is the owner or operator’s responsibility to determine the suitability of the equipment to
its intended use. Study all applicable codes, manuals and regulations. Be sure to read the
Owner’s Manual supplied with the equipment before operating it. |
|
| Ensign 500 on Pedestal Base Performance Ratings² |
|
|
|
|
|
Boom
Position
|
Load
Rating
|
Hook
Reach
|
Hook
Height
|
|
|
(LB)
|
(kg)
|
(in)
|
(mm)
|
(in)
|
(mm)
|
|
A
|
500
|
226
|
500
|
226
|
500
|
226
|
|
B
|
570
|
258
|
600
|
272
|
600
|
272
|
|
A
|
500
|
226
|
500
|
226
|
500
|
226
|
|
B
|
570
|
258
|
600
|
272
|
600
|
272
|
|
C
|
570
|
258
|
850
|
385
|
850
|
385
|
|
C
|
570
|
258
|
850
|
385
|
850
|
385
|
|
C
|
570
|
258
|
850
|
385
|
850
|
385
|
|
C
|
570
|
258
|
850
|
385
|
850
|
385
|
|
|
|
|
 |
¹ Lift below floor level varies depending on boom position and base
configuration. For longer lifts, please contact us.
² Performance Characteristics are for standard products. Nonstandard
products may vary from the original design. Contact us for this
information. |
|
|
Pedestal Base 5BP5
|
|
 |
|
|
|
|
|
|
| Flush/Wall Mount Performance Ratings² |
|
|
|
|
|
|
Boom
Position
|
Load
Rating
|
Hook
Reach
|
Hook
Height
|
|
|
(LB)
|
(kg)
|
(in)
|
(mm)
|
(in)
|
(mm)
|
|
A
|
500
|
226
|
500
|
226
|
500
|
226
|
|
B
|
570
|
258
|
600
|
272
|
600
|
272
|
|
A
|
500
|
226
|
500
|
226
|
500
|
226
|
|
B
|
570
|
258
|
600
|
272
|
600
|
272
|
|
C
|
570
|
258
|
850
|
385
|
850
|
385
|
|
C
|
570
|
258
|
850
|
385
|
850
|
385
|
|
C
|
570
|
258
|
850
|
385
|
850
|
385
|
|
C
|
570
|
258
|
850
|
385
|
850
|
385
|
|
|
 |
¹ Lift below floor level varies depending on boom position and base
configuration. For longer lifts, please contact us.
² Performance Characteristics are for standard products. Nonstandard
products may vary from the original design. Contact us for this
information. |
|
|
|
|
|
|
|
|
|
Wall-Mount Base 5BW5
|
|
Flush-Mount Base 5BF5
|
 |
|
|
ENSIGN 1000 PERFORMANCE
|
| Ensign 1000 Lift Below Floor² Level |
|
|
Lift Below¹Floor
|
Wire Rope Diameter
|
Wire Rope Length
|
Winch Configurations
|
|
Minimum (C)
|
Maximum (A)
|
|
M1
|
M2
|
M3
|
E2
|
E4
|
|
(ft)
|
(m)
|
(ft)
|
(m)
|
(in)
|
(mm)
|
(ft)
|
(m)
|
|
|
6
|
1.8
|
9
|
2.7
|
3/16
|
5
|
20
|
6
|
x
|
-
|
x
|
-
|
x
|
|
14
|
4.2
|
17
|
5.1
|
3/16
|
5
|
28
|
8.5
|
x
|
-
|
x
|
-
|
x
|
|
22
|
6.7
|
25
|
7.6
|
3/16
|
5
|
36
|
10.9
|
x
|
-
|
x
|
-
|
x
|
|
31
|
9.4
|
34
|
10.3
|
3/16
|
5
|
45
|
13.7
|
x
|
-
|
x
|
-
|
x
|
|
46
|
14
|
49
|
14.9
|
3/16
|
5
|
60
|
18.2
|
-
|
-
|
x
|
-
|
x
|
|
61
|
18.5
|
64
|
19.5
|
3/16
|
5
|
75
|
22.8
|
-
|
-
|
x
|
-
|
x
|
|
76
|
23.1
|
79
|
24
|
3/16
|
5
|
90
|
27.4
|
-
|
-
|
x
|
-
|
x
|
|
6
|
1.8
|
9
|
2.7
|
1/4
|
6
|
20
|
6
|
-
|
x
|
x
|
x
|
x
|
|
14
|
4.2
|
17
|
5.1
|
1/4
|
6
|
28
|
8.5
|
-
|
x
|
x
|
x
|
x
|
|
22
|
6.7
|
25
|
7.6
|
1/4
|
6
|
36
|
10.9
|
-
|
x
|
x
|
x
|
x
|
|
31
|
9.4
|
34
|
10.3
|
1/4
|
6
|
45
|
13.7
|
-
|
x
|
x
|
x
|
x
|
|
46
|
14
|
49
|
14.9
|
1/4
|
6
|
60
|
18.2
|
-
|
x
|
-
|
x
|
x
|
|
61
|
18.5
|
64
|
19.5
|
1/4
|
6
|
75
|
22.8
|
-
|
x
|
-
|
x
|
x
|
|
|
|
|
|
|
|
¹ Lift below floor level varies depending on boom position and base configuration. For longer lifts, please contact us.
² Performance Characteristics are for standard products referred to in this manual. Nonstandard products may vary from the original
design. Contact us for this information.
³ Wire rope assemblies include a hood and a swaged ball fitting to work with quick disconnect anchor on winches, cable spooler and
wire rope keeper. 316SS wire rope is also available. Please contact us. |
|
|
|
|
|
|
IMPORTANT:
|
|
It is the owner or operator’s responsibility to determine the suitability of the equipment to
its intended use. Study all applicable codes, manuals and regulations. Be sure to read the
Owner’s Manual supplied with the equipment before operating it. |
|
| Ensign 1000 on Pedestal Base Performance Ratings² |
|
|
|
|
|
|
|
|
|
 |
|
|
Boom
Position
|
Load
Rating
|
Hook
Reach
|
Hook
Height
|
|
|
(LB)
|
(kg)
|
(in)
|
(mm)
|
(in)
|
(mm)
|
|
A
|
500
|
226
|
500
|
226
|
500
|
226
|
|
B
|
570
|
258
|
600
|
272
|
600
|
272
|
|
A
|
500
|
226
|
500
|
226
|
500
|
226
|
|
B
|
570
|
258
|
600
|
272
|
600
|
272
|
|
C
|
570
|
258
|
850
|
385
|
850
|
385
|
|
C
|
570
|
258
|
850
|
385
|
850
|
385
|
|
C
|
570
|
258
|
850
|
385
|
850
|
385
|
|
C
|
570
|
258
|
850
|
385
|
850
|
385
|
|
|
|
¹ Lift below floor level varies depending on boom position and base
configuration. For longer lifts, please contact us.
² Performance Characteristics are for standard products. Nonstandard
products may vary from the original design. Contact us for this
information. |
|
|
|
Pedestal Base 5BP10
|
|
|
 |
|
|
|
|
|
|
|
|
| Flush/Wall Mount Performance Ratings² |
|
|
 |
|
Boom
Position
|
Load
Rating
|
Hook
Reach
|
Hook
Height
|
|
|
(LB)
|
(kg)
|
(in)
|
(mm)
|
(in)
|
(mm)
|
|
A
|
500
|
226
|
500
|
226
|
500
|
226
|
|
B
|
570
|
258
|
600
|
272
|
600
|
272
|
|
A
|
500
|
226
|
500
|
226
|
500
|
226
|
|
B
|
570
|
258
|
600
|
272
|
600
|
272
|
|
C
|
570
|
258
|
850
|
385
|
850
|
385
|
|
C
|
570
|
258
|
850
|
385
|
850
|
385
|
|
C
|
570
|
258
|
850
|
385
|
850
|
385
|
|
C
|
570
|
258
|
850
|
385
|
850
|
385
|
|
|
¹ Lift below floor level varies depending on boom position and base
configuration. For longer lifts, please contact us.
² Performance Characteristics are for standard products. Nonstandard
products may vary from the original design. Contact us for this
information. |
|
|
|
 |
Click the button of the item you wish to purchase. Contact us for special lengths
|
Accessories - Sold Separately
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
|
|
|
|
|
 |
|
|
|
|
|
Roller/Ball Bearing
(for 5PA10 only, not available on 5PA5)
Approx. Shipping Weight: 9 lbs |
|
|
Base Installation Anchor Kits
Approx. Shipping Weight: 2.5 lbs
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Model No.
|
Description
|
Price
|
|
|
Red electrostatic powder
coat paint finish
|
$541.00
|
|
|
304 Stainless steel electro-polished
finish for added protection
|
$930.00
|
|
|
316 Stainless steel electro-polished
finish for a higher level of protection
|
$1,177.00
|
|
|
304 Stainless steel - For use with
stainless steel base only
|
$919.00
|
|
|
316 Stainless steel - For use with
stainless steel base only
|
$1,349.00
|
|
|
Model No.
|
Description
|
Price
|
|
|
four (4) zinc plated steel
fasteners 1/2'' x 5.5''
|
$48.00
|
|
|
four (4) 304 stainless steel
fasteners 1/2'' x 5.5''
|
$177.00
|
|
|
four (4) 316 stainless steel
fasteners 1/2'' x 5.5''
|
$296.00
|
|
|
four (4) zinc plated steel
fasteners 5/8'' x 6''
|
$77.00
|
|
|
four (4) 304 stainless steel
fasteners 5/8'' x 6''
|
$296.00
|
|
|
four (4) 316 stainless
steel fasteners 5/8'' x 6''
|
$503.00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
|
|
|
|
 |
|
|
|
|
|
|
|
|
|
Cable Spool
Approx. Shipping Weight: 12 lbs |
|
Drill Drive Kit
Approx. Shipping Weight: 21 lbs |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Model No.
|
Description
|
Price
|
|
|
Cable spool - stainless steel
|
$520.00
|
|
|
|
Model No.
|
Description
|
Price
|
|
|
Corded Kit: 120 VAC, 11 amp, 330rpm
drill-motor to power drive the hand winch.
Includes 1-1/8” hex drive socket. (for
cranes configured with the M2 winch
option only)
|
$1,166.00
|
|
|
|
|
|
|
|
|
|
|
Limit Switch
Approx. Shipping Weight: 5 lbs |
|
|
|
|
Model No.
|
Description
|
Price
|
|
|
Electric Limit Switch for 5PA5
Series Cranes
|
$2,483.00
|
|
|
Electric Limit Switch for 5PA10
Series Cranes
|
$2,419.00
|
|
|
|
|
Note: Limit switch winch option requires purchase of Limit
Switch and Headache Ball, both sold separately. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Wire Rope Keeper - Stainless Steel bracket
attaches to base or other structure to hold free
end of the wire rope when detached from crane
Approx. Shipping Weight: 1 lb |
 |
|
|
Headache Ball
Keeps cable taut when no load is
attached
Approx. Shipping Weight: 10 lbs |
|
|
|
|
 |
|
|
|
|
|
|
|
|
|
Model No.
|
Description
|
Price
|
|
|
Painted steel
|
$258.00
|
|
|
Polished 316 Stainless Steel
|
$389.00
|
|
|
Red Painted fits 1/4” to 3/8” Rope
|
$258.00
|
|
|
Stainless Steel fits 1/4” to 3/8” Rope
|
$389.00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Model No.
|
Description
|
Price
|
|
|
304 stainless steel wire rope keeper
|
$42.00
|
|
|
316 stainless steel wire rope keeper
|
$85.00
|
|
|
|
|
|
|
|
|
|
|
Ensign Series Portable Davit Crane, Davit Crane, Davit Cranes, Floor Crane, Floor Cranes, Floor Hoist, Mobile Jib Crane,
Portable Davit Crane, Portable Floor Cranes, Portable Shop Cranes, Shop Crane, and Shop Cranes from your complete source
for material handling equipment.
|
|
