The
Model SL Steel Belt Slat conveyor
provides lasting, dependable
performance. Can be used to convey
hot, oily parts or items through heat
drying processes. Can also be used for
assembly line and production operations.
5 Bed Widths
Energy
Efficient Motor with
AC Variable Speed Controller
Rugged–all Steel Construction
Modular Construction
Roller Chain Reduces Friction
Adjustable
SLS-Type Floor
Supports Available
See
bottom of page for conveyor weight chart.
STANDARD
SPECIFICATIONS
END DRIVE–Located
at discharge end of conveyor.
Chain guard located on left hand side.
SLATS–Formed
steel slat, 5-3/4 in. x 1-1/2 in. x 7 ga.
channel.
MOTOR–2 HP–230/460V–3 Ph. 60 Hz. Energy
Efficient C-Face and VSC AC variable speed
controller with soft start capability and
motor
overload protection.
CHAIN–6
in. pitch bushed roller steel chain with 2 in.
dia. high capacity roller bearing.
BED–17
in. deep x 10 ga. formed steel channel powder
painted. Standard 5 ft. and 10 ft. long sections
bolt
together with butt couplings.
BEARINGS–Sealed, pre-lubricated, self-aligning,
ball bearings at drive and tail sprockets.
DRIVE SPROCKETS–12
in. pitch dia. with
2-15/16 in. dia. shaft.
CAPACITY–Maximum load per linear foot of
conveyor 1400 lbs. NOT TO EXCEED capacity
in
chart.
TAKE-UP–Take-ups provided at tail sprockets.
Provides 15-1/2 in. of chain take-up.
FLOOR SUPPORTS–Now supplied as optional
equipment.
CONVEYING SPEED–Constant 30 FPM.
LOAD
CAPACITY CHART @ 30 FPM
HP
SLAT
WIDTH
SLAT
WIDTH
28"
& 37"
43"
& 49"
TOTAL
LOAD (LBS.)
TOTAL
LOAD (LBS.)
UP TO 24'
UP TO 49'
UP TO 79'
UP TO 24'
UP TO 49'
UP TO 79'
2
2400
850
-
2000
-
-
3
6000
4400
2900
5600
3600
1700
Detail
shows inside view of roller chain
which carries steel slats. Chain rides on
steel angle mounted to conveyor side of
channel.
OPTIONAL
EQUIPMENT
FLOOR SUPPORTS–SLS and SLSD Type
fixed floor supports are available. Specify
top of slat
elevation. One support required at every
bed joint
and ends of conveyor. Holes in feet for lagging
to floor.
MOTORS–3 HP maximum.
ELECTRICAL CONTROLS–Push-button stations.
CONVEYING SPEED–Other constant and variable
speeds available. NOTE: Capacity affected
with
speed change.
SLAT–Wood, contact us.
MECHANICAL SHEAR
PIN HUBS - Required if
MD65 Controller is not used.
ELECTRONIC SHEAR
PIN - Required if MD65
Controller is not used.
Order Online
Click the button of the item you wish to purchase.
Steel Slat Bed in 17" Deep x 10 Ga. Formed Steel
Channel Frame
Totally Enclosed Chain Guard
3-30 FPM Variable Conveying Speed
"C" Face Speed Reducer - Sealed Worm Gear
(
Speeds Other than 30 FPM Contact us)
2 HP - 230/460V - 3 Ph. - 60 Hz. "C"
Face Energy Efficient Motor (Specify Exact
Voltage)
and VSC AC Variable Speed Controller with
Soft
Start Capability (not mounted or wired).
For
"IN-BETWEEN WIDTHS", use next width
plus 10%. For widths over 54" OAW, contact us.
INTERMEDIATE
BEDS
Use
per foot price of width x required length, supports
not included..
FLOOR SUPPORTS
Floor
Supports are not included in base price. There
are two (2) stationary floor supports required for the
first bed section and one (1) support per bed
section thereafter.
NON-STANDARD WIDTHS
Contact
us for lead time.
LENGTHS
OVER 79 FT.
Contact
us for lead time.
Order Online
Click the button of the item you wish to purchase.
5 Bed Widths 
