Poly-tier
supports provide sturdy support for multilevel conveyor lines.
Heights available from 36 in. to 120 in. in 6 in. increments.
1-1/2 in.
I.D. (1.9 in O.D.) crosspipe assembly mounted to 1-3/4 in. x
4 in. x
7 ga. steel support legs. Capacity: 1500 lbs. per crosspipe–4500
lbs.
Per set of legs. Supplied for overall conveyor widths from 10
in. to
42 in. wide. Knee braces are supplied to provide extra stability
to
support.
Used In Place of LS or MS
Supports Only
Conveyor Widths 10 in.
to 42 in. Wide
36 in. to 120 in. Support Height
Sturdy Support for Multi-
level Lines
Available for Most Horizontal
Power and Gravity Conveyors
Contact Us for Specific
Application and Available
Sizes
CAPACITY
DATA:
1500
lbs. .......................................... per cross pipe
4500
lbs. .......................................... per set of legs
Order Online
Click the button of the item you wish to purchase.
Ceiling
Hangers provide safe and sturdy means of gaining
high conveyor elevations. Used when maximum utilization
of floor space is needed or when required height exceeds
floor support capability. 5/8 in. fully threaded steel rod
connects to 1-1/2 in. ID (1/9 in. OD) support which
bolts to underside of conveyor with "U" brackets.
Ceiling
Hangers can be supplied with gravity or powered conveyors.
It is recommended that guard rails be used on conveyors
that are ceiling hung.
Ceiling
Hanger Brackets with (2) 5/8" dia. x
8'-0" long unplated fully threaded rods...............
Conveyor
Accessories, Poly-Tier Supports, Powered & Gravity Conveyors,
Multilevel Conveyor Lines, Sturdy Support for multi-
level lines, Ceiling Hangers, and Ceiling Hanger Brackets
from your source for material handling equipment.
Used In Place of LS or MS
