Toggle Nav
My Cart
Quote
Menu
Account

MODEL 190-NSP

LIVE ROLLER CONVEYOR
live roller conveyor The Model 190-NSP Live Roller Spool
Conveyor is a general transport conveyor with
the capabilities of accumulating products with
back pressure.
Quiet operation, versatile design, easy
installation and maintenance make the
190-NSP conveyor a valuable component in
operations requiring high performance with
minimal downtime.
12 Bed Widths
Reversible
Adjustable MS-Type Floor Supports Available
conveyors
STANDARD SPECIFICATIONS
BED–Roller bed with 1.9 in. dia. roller x 16 ga.
galvanized tube spaced every 3 in. Mounted in 9-1/2 in.
x 12 Ga. powder painted formed steel channel frame
bolted together with splice plates.
DRIVE GUARD–Underside of drive shaft with spools
and drive o-rings guarded full length of conveyor.
DRIVE O-RING–3/16 in. dia. polyurethane o-ring
from drive spool to tread rollers.
CROSS BRACING–Rods with turnbuckles are
fastened to underside of bed to provide proper alignment
of bed rollers and insure correct product tracking.
Supplied on every other section 30 ft. bed lengths and
over.
BEARINGS–Sealed, pre-lubricated, self-aligning, ball
bearings with eccentric lock collar on drive shaft.
Pre-lubricated ball bearings in tread rollers.
SPEED REDUCTION–Sealed worm gear C-Face
speed reducer. No. 50 roller chain to drive shaft.
FLOOR SUPPORTS–Now supplied as optional
equipment.
MOTOR–1/2 HP–208/230/460/575V–3 Ph. 60 Hz
Totally Enclosed C-Face.
DRIVE–Mounted underneath, placed near center of
conveyor. NOTE: On Conveyors less than 24 in.
OAW motor extends beyond frame.
CONVEYING SPEED–Constant 65 FPM.
CAPACITY–Maximum load per powered roller–
15 lbs.
NOTE: Maximum load capacity will be less for
products with soft or irregular bottoms. Total load
NOT TO EXCEED capacity in chart.
DRIVE SHAFT–1 in. dia. steel shaft extends full
length of conveyor. Chain coupling at bed joints.
Chain guard located on left hand side.
DRIVE SPOOLS–2 in. dia. Delrin spool held in place
on drive shaft with spool spacers.
conveyor speed 1) Powered drive shaft (coupled at bed joints) is bearing
supported on frame.
2) Drive O-ring transmits power to tread rollers from drive
shaft.
3) Drive spool (held in place by spool spacers) and groove in
tread roller keep drive O-ring in position.
4) If back pressure (accumulation) is applied to tread roller,
drive spool will slip on drive shaft, stopping power to
tread roller.
MOTOR SELECTION CHART
FPM 30-44 45-120
HP (MAX) 1 2
If the required horsepower exceeds the maximum horsepower shown in
the chart, more than one drive is required
LOAD CAPACITY CHART @ 65 FPM
HP OVERALL FRAME WIDTH OVERALL FRAME WIDTH OVERALL FRAME WIDTH
16" to 22" 24" to 30" 34" to 42"
TOTAL LOAD (Lbs.) TOTAL LOAD (Lbs.) TOTAL LOAD (Lbs.)
UP TO 60' UP TO 90' UP TO 120' UP TO 60' UP TO 90' UP TO 120' UP TO 60' UP TO 90' UP TO 120'
1/2 1550 580 - 1340 250 - 1020 - -
1 *3600 4090 3110 *3600 3770 2680 *3600 3280 2040
2 - - *7200 - - *7200 - - *7200
*Limited to 15 lbs. per driven roller.
NOTE: Capacity in Chart based on 3 in. roller centers with all rollers powered.
OPTIONAL EQUIPMENT
CONVEYING SPEED–Other constant and variable
speeds from 30 to 120 FPM. Over 120 FPM timing
belt drive recommended. Capacity affected with speed
change. 		PACKAGE STOPS–Blade, roller or pin stops
available, contact us.
FLOOR SUPPORTS–MS Type floor supports are
available with a wide range of adjustment. Specify top
of belt or roller elevation. One support required at
every bed joint and ends of conveyor. Holes in feet for
lagging to floor. Knee braces recommended above
MS-6 support.
SIDE MOUNTED DRIVE–with Reducer.
SIDE MOUNTED DRIVE–with Gearmotor.
O-RING DRIVE CHAIN–With sealed in lubricant
(Recommended for applications that do not permit
regular lubrication).
POLY-TIER SUPPORTS–36 in. to 120 in. support
heights in 6 in. increments. Knee braces supplied.
LOW ELEVATION DRIVE–Gearmotor mounted
inside of conveyor. Minimum elevation 11-1/4 in.
CEILING HANGERS–5/8 in. dia. x 8 ft. long unplated
rods fully threaded. Other lengths and galvanized rods
available.
POSITIVE DRIVE–Spools are keyed to drive shaft in
positive drive areas.
MOTORS–Energy efficient, single phase, other
characteristics. 2 HP maximum.
CROSSOVER–Separate section relocates drive shaft
from one side of conveyor to the other. Minimum
Elevation - 12-3/8 in.
ELECTRICAL CONTROLS–Non-reversing or
reversible magnetic starter and push-button stations.
AC variable frequency drive.
ONE DIRECTION O-RING TRANSFER– See
Accessories section.
REVERSING O-RING TRANSFER– See
Accessories section.
GUARD RAILS–Adjustable Universal Channel
Guard Rail, fixed channel or type A & B angle.
NOTE: If product comes in contact with guard rails, product flow will be affected.
Fixed channel overlapping, one direction. Fixed channel non-overlapping, reversing.
PRICES FOR COMPLETE CONVEYOR INCLUDE:
1.9" Dia. x 16 Ga. Galvanized Roller (rollers on 3"
Centers) in a 9-1/2" x 12 Ga. Channel Frame		 Totally Enclosed Chain Guard
65 FPM Constant Conveying Speed
"C" Face Speed Reducer–Sealed Worm Gear
Less Electrical Controls
1/2 HP–"C" Face Totally Enclosed Motor
(Specify Exact Voltage)		 Less Floor Supports

Order Online

Click the button of the item you wish to purchase.

Contact us for special lengths

PRICING FOR 190-NSP LIVE ROLLER CONVEYOR

SIZE TO
ORDER
Overall
Length "A"		 Between Rail Widths
15" 21" 27" 33" 39"
Overall Frame Widths
18" 24" 30" 36" 42"
5'
10'
15'
20'
25'
30'
35'
40'
45'
50'
55'
60'
65'
70'
75'
80'
85'
90'
95'
100'
Per Foot Price
IMPORTANT NOTES...
OTHER LENGTHS NON-STANDARD WIDTHS
Other lengths not listed in price chart are available.
For "IN-BETWEEN SIZES", use next larger
Overall Length "A" price. For lengths longer or
shorter than those shown in chart, please contact
us.		 Contact us for lead time.
FLOOR SUPPORTS
Floor Supports are not included in base price. There
are two (2) stationary floor supports required for the
first bed section and one (1) support required per bed
section thereafter.
OTHER WIDTHS
For "IN-BETWEEN WIDTHS", use next width plus
10%. For widths up to 54" OAW, interpolate plus
10%. For widths over 54" OAW, contact us.		 INTERMEDIATE BEDS
Use per foot price of width x required length, supports
not included.
PRICES FOR OPTIONAL EQUIPMENT
OPTIONAL DRIVES FLOOR SUPPORTS
Drive
T ype		 OVERALL FRAME WIDTH
20" to 24" 26" to 42"
Low Elevation*
16" to 24"
26" to 42"
Side Mounted C-Face
Underside Drive Timing Belt
Side Mounted Timing Belt
Not Included in Base Price. Use Chart Below for
Required Elevation.
"MS" SUPPORT
Model No. Adjustment to Top of Roller Price each
*MSL-1 11-3/4" to 12-3/4"
*MSL-2 12-3/4" to 14-1/2"
*MSL-3 14-1/2" to 17-1/8"
*MS-1 16-3/4" to 18-1/2"
*MS-1.2 17-3/4" to 19-1/2"
*MS-1.4 18-3/4" to 20-1/2"
*MS-2 19-3/4" to 22-3/4"
*MS-3 22-3/8" to 25-3/8"
MS-4 25-3/8" to 31-3/8"
MS-5 29-3/8" to 45-3/8"
MS-6 33-3/8" to 45-3/8"
MS-7 43-3/8" to 55-3/8"
MS-8 55-3/8" to 67-3/8"
MS-9 67-3/8" to 79-3/8"
MS-10 79-3/8" to 91-3/8"
MS-11 89-3/8" to 101-3/8"
MS-12 101-3/8" to 113-3/8"
* NOTE: 11-1/4" minimum elevation Requires Eurodrive
Gearmotor (See Motor Chart)
POSITIVE DRIVE
........................add on per foot .................. $30.80
CONSTANT AND VARIABLE SPEEDS
Constant-Within 30 to 120 FPM .............. No Charge
Variable Speed ............. See Electrical Controls and
Drive Section See Below
O-RING DRIVE CHAIN
Speeds up to 120 FPM (#50 Chain)........................
..........................................Add-On.................$301.40
Speeds up to 120 FPM (#60 Chain)........................
..........................................Add-On................ $430.40
* Less than 24" top of roller elevation - Low Elevation
Drive Required.
NOTE: MS-7 to MS-12: Knee Braces included in price.
Extra Knee Braces .......Add per pair ......... $31.80

Order Online

Click the button of the item you wish to purchase.

Contact us for special lengths

MOTORS
Extra Motor Price for OTHER THAN: 1/2 HP - 208/230/460/575V - 3 Ph - 60 Hz. - Totally Enclosed.
Speed affects horsepower requirements.
H.P.
REQ.		 TOTALLY ENCLOSED ENERGY EFFICIENT
200/208/
230V
3Ph. - 60 Hz.		 115/230V
1 Ph. - 60 Hz.		 230/460V
3 Ph. - 60 Hz.		 575V
3 Ph. - 60 Hz.
1/2
1
N/A
2
N/A

H.P.
Req.		 Eurodrive Gearmotor
(Required with Low
Elevation Drive)
208/230/
460/575 3 Ph.-60Hz.
3/4
1
1-1/2
DRIVE COMPONENT DEDUCTS
Less Motor Drive, Motor Mount, Sprockets and
Guards, but with Drive Shaft ...Deduct ..... $694.20
Less Motor Only (1/2 HP-208/230/460/575V-
Ph.-60 Hz.)
........................................Deduct ............. $258.30
Less Reducer ..................Deduct ............. $307.40
(Chain Guard and Sprockets Not Supplied)
GALVANIZING
CROSSOVER
Contact us.
Chain
Speeds up to 120 FPM ..........Add-on ...... $883.70
#50 O-Ring Chain
Speeds up to 120 FPM ..........Add-on ...... $1,231.70
GUARDS RAILS PACKAGE STOPS
NOTE:Available in 5' and 10' lengths only
Contact us for other lengths.		 Angle End Stop
1-1/2" x 1-1/2" x 12 Ga. Steel
13" to 25" Between Rail Width ................... $45.18
Adjustable Universal Channel Guard Rail
27" to 39" Between Rail Width ................... $53.90
Both Sides ...............per foot ..................... $16.00
Raised End Roller Stop
One Side .................per foot .................... $8.20
2-1/8" Dia. Roller
Angle Type
13" to 25" Between Rail Width ................ $83.40
Types "A" or "B" available (specify)
27" to 39" Between Rail Width ................ $103.00
Prices are for both sides
Hand Operated Stop
Type "A"
(Blade or Roller Types, specify)
1-1/2" x 1-1/2" x 12 Ga. per foot .............. $8.20
13" to 23" Between Rail Width ................. $570.90
25" to 39" Between Rail Width ................ $627.70
Type "B" (See Note)
1-1/2" x 1-1/2" x 12 Ga. per foot ............. $11.50
Air Operated Linear Thruster Stop
(Pin, Roller or Blade Types, specify)
Fixed Channel Type
13" to 39" Between Rail Width ................. $1,803.40
Prices are for both sides.
3-1/2" x 1-1/2" x 12 Ga. per foot ............. $23.90
NOTE: Filter Regulator Unit not supplied as standard.
Stops are supplied in NORMALLY DOWN position.
Can be supplied in Normally Up position–Specify.
6-1/2" x 1-1/2" x 12 Ga. per foot ............. $28.70
10" x 1-1/2" x 12 Ga. per foot ................. $40.60
13" x 1-1/2" x 12 Ga. per foot ................. $48.80
ELECTRICAL CONTROLS
NOTE: If product comes in contact with guard
rails, product flow will be affected.
(See below)

Order Online

Click the button of the item you wish to purchase.

Contact us for special lengths

OPTIONAL CENTERS
Other than Standard 3". See Chart below.
Between Rail Width 13" 15" 17" 19" 21" 23" 25" 27" 31" 33" 37" 39"
Overall Frame Width 16" 18" 20" 22" 24" 26" 28" 30" 34" 36" 40" 42"
Add On Per Foot of
Conveyor 2" Centers
TRAFFIC COP
traffic cop
The Traffic Cop controls product flow from one conveyor onto
another. It allows products from one line of traffic to flow freely,
without interference from another converging line of traffic. This
eliminates collision of products which may cause damage and
disrupt product flow. Specify model, width and degree.
7 arm widths, aluminum
Available in 30°, 45°, 60°, 90° & 180° applications.
Includes mounting hardware
* 180° application - 10" minimum required between lines
5 lbs. Minimum Package Weight at 65 FPM Required to
Actuate Arm.		 190-NSP, NSPC, NSPS & NSPSS
190-ACC, LRS, & LRS
Overall Frame Width 16" to 28" 30" to 42"
Price Each
250 lbs. Maximum Accumulated Capacity
CEILING HANGERS
Ceiling Hanger Brackets with (2) 5/8" dia. x 8’-0" long unplated
fully threaded rods ......................................................................
ceiling hangers for conveyors $156.70
Ceiling Hanger Brackets with (2) 5/8" dia. x 8’-0" long galvanized
fully threaded rods .......................................................................
$187.20
Ceiling Hanger Brackets with (2) 5/8" dia. x 10’-0" long unplated fully
threaded rods................................................................................
$231.60
Ceiling Hanger Brackets with (2) 5/8" dia. x 10’-0" long galvanized fully threaded rods.................................................................................
$381.20
Ceiling Hanger Brackets with (2) 5/8" dia. x 12’-0" long unplated fully threaded rods.................................................................................
$384.40
Ceiling Hanger Brackets with (2) 5/8" dia. x 12’-0" long galvanized fully threaded rods..................................................................................
$444.50
Ceiling Hanger Brackets, Less Rods Only .................................... $98.70
Extra Length Rods:
(2) 8’-0" long x 5/8" dia. unplated fully threaded rods .................. $57.40
(2) 8’-0" long x 5/8" dia. galvanized fully threaded rods ............... $88.40
(2) 10’-0" long x 5/8" dia. unplated fully threaded rods ................ $132.70
(2) 10’-0" long x 5/8" dia. galvanized fully threaded rods ............. $282.30
(2) 12’-0" long x 5/8" dia. unplated fully threaded rods ................ $285.80
(2) 12’-0" long x 5/8" dia. galvanized fully threaded rods ............. $346.00
Hex Coupling Nuts for Rods ......................................................... $5.20
Above noted delivery times determined by delivery time of model ordered.
POLY-TIER SUPPORTS
poly tier supports for conveyors
PRICES FOR COMPLETE
SUPPORT INCLUDE:
 IMPORTANT NOTES
• Check for Clearance
• Specify type of conveyor to be used.
• Use in place of LS or MS Supports only.
• Painted Steel Support Legs
• Adjustable Cross pipe Assembly
• Knee Braces (1 set per level of
conveyor)
• "U" Brackets
• Single Width Conveyor Only
CAPACITY DATA:
1500 lbs..............................................per cross pipe
4500 lbs..............................................per set of legs
(2) TIER POLY-TIER SUPPORTS
36"
42"
48"
54"
60"
66"
72"
78"
84"
90"
96"
102"
108"
114"
120"
(3) TIER POLY-TIER SUPPORTS
36"
42"
48"
54"
60"
66"
72"
78"
84"
90"
96"
102"
108"
114"
120"

Order Online

Click the button of the item you wish to purchase.

Contact us for special lengths
TURNING WHEEL
Turning Wheels are used in converging 30° and 45° spur applications. Also used at 90° (right angle)
transfers where Traffic Cops, Package Stops and other product flow controlling devices are used.
Wheel is mounted on adjustable bracket to insure proper package orientation through transfer. Can be
mounted to slider bed channels of powered and gravity conveyors - specify model where applicable.
turning wheels
6" Dia. Turning Wheel with mounting hardware ............... $130.40
O-RING TRANSFER
PRICES FOR BELT TRANSFER INCLUDES:
o-ring transfer
4 Urethane Transfer O-Rings
Air Operated Lifting Device
Less Electrical Controls
TRANSFER
FLOW		 BETWEEN RAIL WIDTH
13" to 25" 27" to 39"
STANDARD
OPPOSITE DIRECTION
REVERSING
* NOTE: 10" BR NOT AVAILABLE
NOTE: Length of Transfer Module Available in 3" & 4" Roller Centers Only. With 4" Roller Centers in Area
of Transfer.
NOTE: O-Ring Transfer Price Does Not Include Conveyor.
NOTE: No accumulation in transfer section.
NOTE: 1/4 HP per transfer must be included in conveyor HP requirement.
NOTE: Reversing Type has 1/2 230/460/575/3 Gearmotor with AC Variable Speed Controller.
transfers

Order Online

Click the button of the item you wish to purchase.

Contact us for special lengths

ELECTRICAL CONTROLS AND DRIVE SECTION
MANUAL START SWITCH or
SAFETY DISCONNECT
 limit switch LIMIT SWITCH, SINGLE POLE,
WITH NYLON ROLLER LEVER
manual start switch
#032.1014......................................... $225.79 #033.2032 & #033.2072..................$589.01
Nema 4
"START-STOP", Nema 1, One direction, 30
AMP, 3 Pole (Single or 3 phase)
LIMIT SWITCH, DOUBLE POLE,
WITH NYLON ROLLER LEVER
limit switch double pole
#033.2033& #033.2072...................$352.04
Nema 4
REVERSING DRUM SWITCH
#032.103.......................................... $905.51
"Fwd-Stop-Rev", Nema 1, for 1-1/2 HP at
115 volts or 2 HP at 230 volts single phase,
or 2 HP max. three phase
PROXIMITY SWITCH, INDUCTIVE,
(METAL SENSING)

#032.210.........................................$217.67
115 Volt AC, two wire with ground, 30mm dia.,
10mm range
foot swtich with guard FOOT SWITCH WITH GUARD
#032.211.........................................$257.68
24 Volt DC, two wire with ground, 30mm dia.,
10mm range
#032.200........................................... $286.50
(Constant Pressure) "On-Off" type, Nema 1,
Pilot Control or 1 HP max. single phase.
PHOTO EYE, ON-OFF TYPE
power cord and plug #EA-000005......................................$1,122.83
Banner Q45 Retro Reflective Photo Eye Kit
with timing module, reflector and mounting
brackets. Photo Eye output is one form C
type relay, Operating voltage
24-250VAC/12-250VDC
POWER CORD AND PLUG (20')
POWER CORD WITH PLUG ONLY 20' LONG
Model No.
Voltage
HP Rating
Prices
EA-039-1A
115/1
1/2-3/4
EA-039-2A
115/1
1
EA-039-3A
115/1
1 1/2
EA-039-4A
230/1
1/2-1
EA-039-5A
230/1
1 1/2-2
EA-039-6A
208-230/3
1/2-2
EA-039-7A
460/3
1/2-2
POWER CORD WITH PLUG 20' LONG WITH MANUAL START SWITCH AND MOUNTING BRACKET
Model No.
Voltage
HP Rating
Prices
EA-039-1B
115/1
1/2-3/4
EA-039-2B
115/1
1
EA-039-3B
115/1
1 1/2
EA-039-4B
230/1
1/2-1
EA-039-5B
230/1
1 1/2-2
EA-039-6B
208-230/3
1/2-2
EA-039-7B
460/3
1/2-2
MOUNTING BRACKETS FOR PHOTO
EYE #033.2122
B-05165...........................................$125.19
AIR PRESSURE SWITCH
#094.191........................................$732.79
Nema 4
EMERG. STOP PULL CORD SWITCH
#032.285 with 032.2851 Turnbuckle
...........................................................$737.85
Nema 4
"RED" EMERGENCY PULL CORD
CABLE AND MOUNTING HARDWARE
#032.281...one side.................$7.88 per / ft.
both sides..............$16.83 per / ft.
EMERGENCY PUSH BUTTON
#032.284..........................................$296.39
Nema 4
PHOTO EYE, 18MM DIA., DIFFUSED,
(PHOTO PROX.) 115 VOLT, LIGHT
OPERATE, 2-METER CABLE
#032.2113 (100mm range, 3.94")....$1,130.24
#032.2116 (200mm range, 7.87")....$205.79
#033.218 (400mm range, 15.74")....$311.09
NOTE: PRICING LISTED NOT MOUNTED
OR WIRED 		"PHOTO EYE, RETRO-REFLECTIVE,
(POLARIZED) 24 VOLT DC
#033.2128 with 032.21122 Cable.....$253.44
#032.21122 (Cable Only)...................$76.71

Order Online

Click the button of the item you wish to purchase.

Contact us for special lengths

CONTROLLER PRICES
AC VARIABLE SPEED CONTROLLER ONLY
SINGLE PHASE CONTROLLER INPUT
Motor Size 115 Volt 208/230 Volt
1/2 VSC-12-10 VSC-12-12
Price $1,581.35 $1,260.73
1 VSC-12-11 VSC-12-13
Price $1,827.73
2 N/A
VSC-12-14
Price ~
THREE PHASE CONTROLLER INPUT
Motor Size 208/230 Volt 460 Volt 575 Volt
1/2
VSC-01-15
VSC-01-18
VSC-12-29
Price
1
VSC-01-16
VSC-01-19
VSC-12-29
Price
2
VSC-01-17
VSC01--20
VSC-12-30
Price
REPLACEMENT INVERTER DUTY
ENERGY EFFICIENT MOTORS
HP Part No. Price
1/2 032.351 230/460
1 032.353 230/460
2 032.355 230/460
1/2 032.3512 575
1 032.3532 575
2 032.3552 575
IMPORTANT NOTES...
• All above motors are 230 / 460 / 575 Volt, 3 Phase.
• All above V/S Drive Kits include NEMA 1 / IP30
Junction Box, Controller and Motor.
• Good for cycle rates of up to 15 cycles per minute, at
1/2 second ramp time, with a maximum speed of 250
FPM.
• Drawing No. DG-001146.
OPTIONAL: Mounting and Wiring Add-On . . .
(mounted close to the motor)		 $715.70
Brake Relay Kit (EA-068A).............................. $575.24 • When AC Variable Speed Controller is used with a
Brake Motor, A Brake Relay Kit (EA-068A) is
required. Add an additional $575.24 for this option.)
ELECTRONIC CLUTCH BRAKE DRIVE PACKAGE
Part No. Description Price
EA-VSC-01-CB 2 HP Electronic Clutch-Brake Kit $5,361.50
OPTIONAL: Mounting and Wiring Add-on .
(mounted close to the motor)		 $715.70
KIT INCLUDES
Part No. Description
VSC-01-20 AC Variable Speed Controller, 460 Volt, 3 Phase
032.345 2 HP 460 Volt, 3 Phase, C-Face Motor TEBC
(Blower Cooled) With 5AC Reducer and #60 Chain
and Sprockets
IMPORTANT NOTES
• Good for cycle rates of up to 60 cycles per minute.
• 1/10 second Accel and Decel time, with 350 FPM
Maximum Speed.
• 230 or 460 Volt Only, Other Voltages, Contact us.
• Motor Cooling Blower is 115 Volt, 1 Phase, 60 Hz.
• Price Includes 5AC Reducer and #60 Chain and
Sprockets
Part No. Description
VSC-01-17 AC Variable Speed Controller, 230 Volt, 3 Phase
032.345 2 HP 230 Volt, 3 Phase, C-Face Motor TEBC
(Blower Cooled) With 5AC Reducer and #60 Chain
and Sprockets

Order Online

Click the button of the item you wish to purchase.

Contact us for special lengths

• "Start-Stop" Push-button Station • "Start-Stop"Push-button Station
033.1955 $223.91 033.195................................................. $151.10
Remote mounted, Nema 1 To be mounted in Mag Starter Cover
• "Fwd-Rev-Stop" Push-button Station • "Fwd-Rev-Stop"Push Button Station
033.1965 $420.87 033.196.................................................. $520.41
Remote mounted, Nema 1 To be mounted in Mag Starter Cover
• "Up-Down-Stop" Push-button Station
033.1975 $420.87 • Mounting Brackets for photo eye
Remote mounted, Nema 1
#033.2122
B-05165 ..............................................		 $125.19
CONVEYOR WEIGHT CHART
SIZE TO
ORDER
Overall
Length "A"		 Between
Rail Width		 13" 15" 17" 19" 21" 23" 25" 27" 31" 33" 37" 39"
Overall
Frame Width		 16" 18" 20" 22" 24" 26" 28" 30" 34" 36" 40" 42"
5'

WEIGHTS
(Lbs.)
Weights
Based on
3" Roller
Centers

229 236 249 259 272 284 293 307 329 341 364 376
10' 371 384 409 426 450 472 488 514 553 576 618 639
15' 513 533 569 594 629 660 684 721 778 811 872 902
20' 655 682 729 761 808 848 880 928 1003 1046 1126 1166
25' 797 830 889 929 987 1036 1076 1135 1228 1281 1380 1429
30' 939 979 1049 1096 1166 1224 1271 1342 1453 1517 1634 1692
35' 1082 1128 1209 1264 1344 1413 1467 1549 1678 1752 1888 1956
40' 1224 1276 1369 1431 1523 1601 1663 1756 1903 1987 2142 2219
45' 1366 1425 1529 1599 1702 1789 1859 1963 2127 2222 2396 2483
50' 1508 1574 1689 1766 1881 1977 2054 2170 2352 2458 2650 2746
55' 1650 1723 1849 1934 2060 2165 2250 2377 2577 2693 2904 3009
60' 1793 1871 2009 2102 2238 2354 2446 2584 2802 2928 3158 3273
65' 1935 2020 2169 2269 2417 2542 2642 2791 3027 3163 3412 3536
70' 2077 2169 2329 2437 2596 2730 2837 2998 3252 3399 3666 3800
75' 2219 2317 2489 2604 2775 2918 3033 3205 3477 3634 3920 4063
80' 2361 2466 2649 2772 2954 3106 3229 3412 3702 3869 4174 4326
85' 2503 2615 2809 2939 3133 3294 3425 3619 3926 4104 4428 4590
90' 2646 2764 2969 3107 3311 3483 3620 3826 4151 4340 4682 4853
95' 2788 2912 3129 3274 3490 3671 3816 4033 4376 4575 4936 5117
100' 2930 3061 3289 3442 3669 3859 4012 4240 4601 4810 5190 5380
Accumulating Conveyor, Live Roller Conveyor, Spool Conveyor, Conveyor, Live Roller Conveyors, Powered
Live Roller, Conveyors, and Roller Conveyors from your source for material handling equipment.