Toggle Nav
My Cart
Quote
Menu
Account

MODEL 190-ACC

HORIZONTAL POWER CONVEYOR
(ACCUMULATING TYPE)
hiorizontal power conveyor accumulating type
The simplest method ever devised for
accumulating cartons, boxes, etc.
Basic design eliminates complicated
adjustments and allows a minimum
of 2% back pressure.
• 12 Bed Widths
• 2% Minimum Back
Pressure
• Finger Tip Snub Roller
Adjustment, No Tools
Needed
• Reversible
• Adjustable MS-Type Floor
Supports Available
SPEED CHART FOR SHAFT MOUNTED
DRIVE ON 190ACC
SPEED FPM MAX HP MOTOR FRAME

26

 1/2 56C
32 1 56C
43 1 56C
52 1 56C
64 2 140TC
86 2 140TC
103 2 140TC
129 2 140TC
*172 2 140TC
*257 2 140TC
*343 2 140TC
Conveyor shown with featured option -
shaft mounted drive.
horizontal conveyor
STANDARD SPECIFICATIONS
BED - Roller bed with 1.9 in. dia. roller x 16 Ga.
galvanized tube spaced every 3 in. and 1.9 in. dia.
pressure roller x 16 Ga. galvanized tube spaced ever
6 in. Mounted in 6-1/2 in. x 12 Ga. powder painted
formed steel channel frame bolted together with butt
couplings.		 RETURN TAKE-UP SHEAVE - 3-1/4 in. dia. x
1/2 in. bore flat idler has seven position adjustment to
maintain proper V-belt tension.
BEARINGS - Tread & pressure rollers have pre-
lubricated ball bearings. Flange and pillow block
bearings are sealed, pre-lubricated with eccentric
lock collar.
CROSS BRACING - Rods with turnbuckles are
fastened to underside of bed to provide proper
alignment of bed rollers and insure correct product
tracking. Supplied on every other section 30 ft.
lengths and over.
SPEED REDUCTION - Sealed worm gear C-Face
speed reducer. No. 50 roller chain to drive shaft.
MOTOR - 1/2 HP-208/230/460/575V-3 Ph
60 Hz. Totally Enclosed C-Face.
FLOOR SUPPORTS - Now supplied as optional
equipment.
CONVEYING SPEED - Constant 25 - 120 FPM.
CAPACITY - Maximum load per linear foot of
conveyor 150 lbs. NOT TO EXCEED capacity in
chart.
DRIVE - Mounted underneath, placed near center
of conveyor.
DRIVE BELT–Endless B-section aramid core V-Belt
drives each section of conveyor.
HOW IT WORKS!

The driving of the tread rollers on the minimum pressure conveyor is accomplished with the top surface of a
standard section endless V-belt. The strength and wear qualities of the tread rollers and this belt have been
thoroughly tested for continuous duty.
To maintain the driving of the tread roller, the pressure roller is mounted in spring adjusted carriers (See Photo
below) which sense the required driving friction regardless of the length of accumulated load. This pressure can be
maintained constantly to give a 2% minimum back pressure in either a forward or reverse direction.
In the event of extreme changes in unit load (weight of box or package), convenient knurled thumb adjusting nuts
can be turned to accept this heavier load.
This method eliminates the need for selecting proper tension spring holes in trigger mechanisms or jogging cleats on
driving belt and eccentric (off center) tread rollers.
By maintaining a constant minimum pressure on the tread rollers, long loads may be conveyed, accumulated or
stopped on the conveyor at any point using very little motor horsepower and giving practically no pressure
between boxes or packages.
LOAD CAPACITY CHART @ 65 FPM
HP
OVERALL FRAME WIDTH
OVERALL FRAME WIDTH
OVERALL FRAME WIDTH
18"
24" to 30"
34" to 42"
TOTAL LOAD
(LBS.)
TOTAL LOAD (LBS.)
TOTAL LOAD (LBS.)
UP TO 100'
UP TO 100'
UP TO 100'
1/2
1000
800
500
1
2400
2200
2000
2
3500
3000
2600
OPTIONAL EQUIPMENT
CONVEYING SPEED - Other constant speeds from
25 to 120 FPM. V-belt drive supplied under 56 FPM
(with 1 HP). NOTE: Capacity and
accumulation feature affected with speed change.		 FLOOR SUPPORTS–MS Type floor supports are
available with a wide range of adjustment. Specify top
of belt or roller elevation. One support required at
every bed joint and ends of conveyor. Holes in feet
for lagging to floor. Knee braces recommended
above MS-6 support.
SIDE MOUNTED DRIVE - Motor reducer unit
mounted to side of conveyor. Elevation 10-1/2 in.
with standard sheave retainer. 9-3/8 in. elevation
at drive, 8-3/4 in. elevation at intermediate when low
elevation sheave retainer used.
POLY-TIER SUPPORTS - 36 in. to 120 in. support
heights in 6 in. increments. Knee braces supplied.
CEILING HANGER - 5/8 in. dia. x 8 ft. long unplated
rods fully threaded. Other lengths and galvanized rods
available.
V-BELT DRIVE - V-Belt supplied between motor
and reducer.
O-RING DRIVE CHAIN–With sealed in lubricant
(Recommended for applications that do not permit
regular lubrication).
MOTORS - Energy efficient, single phase, brake-
motor, other characteristics. 2 HP maximum.
ELECTRICAL CONTROLS–Non-reversing or
reversible magnetic starters and push-button stations.
AC variable frequency drive.
PACKAGE STOPS - Roller or pin type stops
available, contact us.
GUARD RAILS - Adjustable Universal Channel Guard
Rail, fixed channel, type A & B angle. NOTE: If product
comes in contact with guard rails, product flow will
be affected.Fixed channel overlapping, one direction.
Fixed channel nonoverlapping, reversing.
SHAFT MOUNTED DRIVE - Motor reducer unit
mounted on extended drive shaft. Can be mounted with
standard sheave retainer for 10-½ in. elevation (motor
horizontal), or can be mounted with low elevation sheave
retainer for 8-3/4 in. elevation (motor vertical). Mounting
bracket and torque arm allows for multiple mounting
positions. See below for speeds.
ROLLER CENTERS – Tread rollers spaced every
2 in. and 4 in. NOT AVAILABLE in 7 ft. 6 in. bed.
SPRING BALANCED GATE - See 190-E24G
powered or gravity die spring balanced gate below.
PRICES FOR COMPLETE CONVEYOR INCLUDE:
• 1.9" Dia. x 16 Ga. Galvanized Roller (Rollers on 3" Centers) in a 6 1/2" x 12 Ga. Channel Frame
• Driving V-Belt
• "C" Face Speed Reducer–Sealed Worm Gear
• 1/2 HP–"C" Face Totally Enclosed Motor (Specify ExactVoltage)
• Totally Enclosed Chain Guard
• 65 FPM Constant Conveying Speed
• End Guards
• Less Electrical Contro

Order Online

Click the button of the item you wish to purchase.

Contact us for special lengths
SIZE TO ORDER
Overall Length
"A"
Between Rail Widths
15" 21" 27" 33" 39"
Overall Frame Widths
18" 24" 30" 36" 42"
5'
10'
15'
20'
25'
30'
35'
40'
45'
50'
55'
60'
65'
70'
75'
80'
85'
90'
95'
100'
Price Per Foot
IMPORTANT NOTES

• OTHER LENGTHS
Other lengths not listed in price chart are available. For "IN-BETWEEN SIZES", use next larger Overall Length "A"
price. SEE BED LENGTHS BELOW.
• OTHER WIDTHS
For "IN-BETWEEN WIDTHS", use next width plus 10%. For widths up to 63" OAW, interpolate plus 10%.
For widths over 63" OAW, contact us.
• DRIVE LOCATION
Drive is mounted in approximate center of conveyor length on multiple bed lengths only.
• FLOOR SUPPORTS
 Floor supports are not included in base price. There are two (2) stationary floor supports required for the first
bed section and one (1) support required per bed section thereafter.
• NON-STANDARD WIDTHS
 Contact us for lead time.
• INTERMEDIATE BEDS
 Intermediate bed sections are available in multiples of 4’, 5’, 6’, 7 1/2’, 8’, and 10’ lengths only. Use
per foot price of width x required length, supports not included. Available in 5’ and 10’ lengths only.
All other weeks- 2 weeks.

Order Online

Click the button of the item you wish to purchase.

Contact us for special lengths
PRICES FOR OPTIONAL EQUIPMENT
OPTIONAL DRIVES DRIVE COMPONENT DEDUCTS
Unified Drives: (Shaft Mounted) Less Motor Drive, Motor Mount and Guards, but with
Unified Drives: 16" to 28" 30" to 42"
Shaft Mounted Drive
Shaft Extension..............Deduct................. $694.20
Less Motor Only (1/2 HP-208/230/460/575V-3 Ph.-
Speed FPM 43 52 64 86 103 129 172 257 343
Max HP 1 1 2 2 2 2 2 2 2
60 Hz)................Deduct......................... $258.30
*Less Reducer........Deduct...................... $307.00
*Less V-Belt Guard, Chain Guard, sheaves and
sprockets when V-Belt drive is supplied. Less chain
guard and sprockets when C-Face drive is supplied.
* Reducer size increases with 2 HP.
**Contact us.
#50 O-Ring Drive Chain .......Add........... $301.40
#60 O-Ring Drive Chain .......Add........... $430.40
SLAVE CONNECTION KIT
OPTIONAL DRIVES
OVERALL FRAME WIDTH
Drive Type
16" to 24"
26" to 42"
Underside Drive (V-Belt)
Side Mounted (C-Face)
Side Mounted (V-Belt)
For Slave Driving existing curves............... $239.80
(Please provide sketch)
GUARD RAILS
NOTE:Available in 5' and 10' lengths only
Contact us for other lengths.
FLOOR SUPPORTS Adjustable Universal Channel Guard Rail
Not Included in Base Price. Use Chart Below for
Required Elevation.		 Both Sides..............per foot...................... $16.00
One Side.................per foot..................... $8.20
"MS" SUPPORT
Model No. Adjustment to Top of Roller Price Each
*MS-1 13-3/4" to 15-1/2"
*MS-1.2 14-3/4" to 16-1/2"
*MS-1.4 15-3/4" to 17-1/2"
*MS-2 16-3/4" to 19-3/4"
MS-3 19-3/8" to 22-3/8"
MS-4 22-3/8" to 28-3/8"
MS-5 26-3/8" to 32-3/8"
MS-6 30-3/8" to 42-3/8"
MS-7 40-3/8" to 52-3/8"
MS-8 52-3/8" to 64-3/8"
MS-9 64-3/8" to 76-3/8"
MS-10 76-3/8" to 88-3/8"
MS-11 86-3/8" to 98-3/8"
MS-12 98-3/8" to 110-3/8"
Angle Type
Types "A" or "B" available (specify)
Prices are for both sides
Type "A"
1-1/2" x 1-1/2" x 12 ga..........per foot......
$8.20
Type "B" (See Note)
1-1/2" x 1-1/2" x 12 ga......... per foot......
$11.50
Fixed Channel Type - Non-Overlapping
(Reversing) (Prices are for both sides.)
3-1/2" x 1-1/2" x 12 Ga. ...per foot..........
$23.90
6-1/2" x 1-1/2" x 12 Ga. Per foot.......... $28.70
10" x 1-1/2" x 12 Ga. Per foot............. $40.60
13" x 1-1/2" x 12 Ga. Per foot............. $48.80
Fixed Channel Type - Overlapping (One Direction)
(Prices are for both sides.)
3-1/2" x 1-1/2" x 12 Ga. Per foot.......... $27.20
6-1/2" x 1-1/2" x 12 Ga. Per foot.......... $34.60
10" x 1-1/2" x 12 Ga. Per foot............. $45.80
13" x 1-1/2" x 12 Ga. Per foot............. $54.60
*Less than 19" top of roller elevation - Side Mounted Drive
Required.
*NOTE: If product comes in contact with guard rails,
product flow will be affected.
**Angle & Channel Guards are punched to allow for
Adjustment Carriage Bolts on Adjustment Carriage
Side
NOTE: MS-7 to MS-12" Knee Braces included in price.
Extra Knee Braces................. per pair....... $31.80
LOW ELEVATION
Low Elevation Sheave Retainer Bracket to provide
8-3/4" elevation for 190ACC.
(Shaft Mounted Drive required - See Optional Drives)
REPLACEMENT BED
Intermediate Beds - When ordering replacement
intermediate bed sections, use per foot price of
appropriate bed width shown in price chart.
Available in 5’ &10’ lengths ONLY.
Low Elevation Sheave Retainer Bracket to provide
9-1/2" elevation for 190ACC.
(Side Mounted Drive required - See Optional Drives)
Tail Bed - When ordering replacement tail bed
Add-on per Sheave Retainer Bracket........... $177.70
sections, add an additional............................ $571.20
Available in 10’ lengths ONLY.
SKEWED ROLLERS
3" roller centers, complete with Positive Drive
and Filler Rollers (Specify RH or LH) ....................
PACKAGE STOPS
Angle End Stop
...... Add-On per foot of conveyor ............ $64.60
1-1/2" x 1-1/2" x12 Ga. Steel
13" to 25" Between Rail Width................ $45.18
POSITIVE DRIVE
27" to 39" Between Rail Width................ $53.90
3" or 4" roller centers, specify .....................................
Raised Roller End Stop
.......Add-on per foot of conveyor............

$27.20

2-1/8" Dia. Roller
TRAFFIC COP 13" to 25" Between Rail Width................ $83.40
See below. 27" to 39" Between Rail Width................ $103.00
Hand Operated Stop
ELECTRICAL CONTROLS
(Blade or Roller Types, specify)
See below.
13" to 23" Between Rail Width ................. $570.90
GALVANIZING
25" to 39" Between Rail Width ................ $627.70
Contact us.
Air Operated Linear Thruster Stop
(Pin, Roller or Blade Types, specify)
SPRING BALANCED GATE
13" to 39" Between Rail Width................ $1,803.40
See E24 Powered Gate below.
NOTE: Filter Regulator Unit not supplied as standard.
Stops are supplied in NORMALLY DOWN position
with SINGLE SOLENOID VALVE. Can be supplied
in NORMALLY UP position. Can also be supplied with
DOUBLE SOLENOID VALVE.
CONSTANT AND VARIABLE SPEEDS
Constant - C-Face Within 25 - 120 FPM... No Charge
Variable Speed....See Electrical Controls and Drive
Section Below.
NOTE: Speeds other than 65 FPM will drastically
affect accumulation feature.

Order Online

Click the button of the item you wish to purchase.

Contact us for special lengths

MOTORS
Extra Motor Price for OTHER THAN: 1/2 HP–208/230/460/575 V–3 Ph.–60 Hz.–Totally Enclosed. Speed affects
horsepower requirements.
H.P. REQ.
TOTALLY ENCLOSED
ENERGY EFFICIENT
200/208/230/
460/575V
3 Ph.-60 Hz.		 115/230V
1 Ph.-60 Hz.		 230/460V
1 Ph.-60 Hz.		 575V
3 Ph.-60 Hz.
1/2 N/C
1 N/A
2 N/A
• CEILING HANGERS
Ceiling Hanger Brackets with (2) 5/8" dia. x 8’-0" long unplated
fully threaded rods ......................................................................
ceiling hangers for conveyors $156.70
Ceiling Hanger Brackets with (2) 5/8" dia. x 8’-0" long galvanized
fully threaded rods .......................................................................
$187.20
Ceiling Hanger Brackets with (2) 5/8" dia. x 10’-0" long unplated fully
threaded rods................................................................................
$231.60
Ceiling Hanger Brackets with (2) 5/8" dia. x 10’-0" long galvanized fully threaded rods.................................................................................
$381.20
Ceiling Hanger Brackets with (2) 5/8" dia. x 12’-0" long unplated fully threaded rods.................................................................................
$384.40
Ceiling Hanger Brackets with (2) 5/8" dia. x 12’-0" long galvanized fully threaded rods..................................................................................
$444.50
Ceiling Hanger Brackets, Less Rods Only .................................... $98.70
Extra Length Rods:
(2) 8’-0" long x 5/8" dia. unplated fully threaded rods .................. $57.40
(2) 8’-0" long x 5/8" dia. galvanized fully threaded rods ............... $88.40
(2) 10’-0" long x 5/8" dia. unplated fully threaded rods ................ $132.70
(2) 10’-0" long x 5/8" dia. galvanized fully threaded rods ............. $282.30
(2) 12’-0" long x 5/8" dia. unplated fully threaded rods ................ $285.80
(2) 12’-0" long x 5/8" dia. galvanized fully threaded rods ............. $346.00
Hex Coupling Nuts for Rods ......................................................... $5.20
Above noted delivery times determined by delivery time of model ordered.
• POLY-TIER SUPPORTS
poly tier supports for conveyors
PRICES FOR COMPLETE
SUPPORT INCLUDE:
 IMPORTANT NOTES
• Check for Clearance
• Specify type of conveyor to be used.
• Use in place of LS or MS Supports only.
• Painted Steel Support Legs
• Adjustable Cross pipe Assembly
• Knee Braces (1 set per level of
conveyor)
• "U" Brackets
• Single Width Conveyor Only
CAPACITY DATA:
1500 lbs..............................................per cross pipe
4500 lbs..............................................per set of legs
(2) TIER POLY-TIER SUPPORTS
36"
42"
48"
54"
60"
66"
72"
78"
84"
90"
96"
102"
108"
114"
120"
(3) TIER POLY-TIER SUPPORTS
36"
42"
48"
54"
60"
66"
72"
78"
84"
90"
96"
102"
108"
114"
120"

Order Online

Click the button of the item you wish to purchase.

Contact us for special lengths

190-E24G - Powered Gate With Die Springs

• 1.9" Dia. x 16 Ga. Galvanized O-Ring-Slaved Rollers in a 6 1/2" x 12 Ga. Channel
Frame
• (2) 24 Volt DC Motors with Control Cards on 4’ and 5’ Gate or (1) 24 Volt DC
Motor with Control Card on 3’ Gate
• Power Supply - 27 VDC 4 AMP (Requires 120 VAC or 230 VAC Single Phase
Input Voltage)
• Non-Reversing
• Hinge Mechanism with Die Springs
• 65 FPM Constant Conveying Speed
• Less Floor Supports		 power gate with die springs
IMPORTANT NOTES. . .
• WHEN ORDERING: Please specify
section to which Gate Hinge Assembly
will be attached.
• NOTE: Gate is ONE DIRECTION
ONLY. Contact factory for Reversing
Application.
• 3 ft. OAL Gates with 2 in. roller
centers require TWO motors.
• 4 ft. and 5 ft. OAL Gates with 2 in.
roller centers require THREE motors.
conveyor power gate

SIZE TO ORDER
Length "A:

 Between Rail Width
13" 15" 17" 19" 21" 23" 25" 27" 31" 33" 37" 39"
Overall Frame Width
16" 18" 20" 22" 24" 26" 28" 30" 34" 36" 40" 42"
5' 109 117 125 133 141 149 157 165 181 189 205 213
4' 83 91 99 107 115 123 131 139 155 163 179 187
3' 57 65 73 81 89 97 105 113 127 151 153 161

Order Online

Click the button of the item you wish to purchase.

Contact us for special lengths

PRICES FOR COMPLETE CONVEYOR INCLUDE:
• 1.9" Dia. x 16 Ga. Galvanized O-Ring-Slaved Rollers (Rollers on 3" Centers) in a 6-1/2" x 12 Ga. Channel Frame
• (2) 24 Volt DC Motors with Control Cards on 4' and 5', (1) 24 Volt DC Motor with Control Card on 3' Gate
• Power Supply - 27 VDC 4 AMP (Requires 120 VAC or 230 VAC Single Phase Input Voltage)
• Hinge Mechanism with Die Springs
• 65 FPM Constant Conveying Speed
• Less Floor Supports
3" ROLLER CENTERS
Size To
Order		 Between Rail Width
13" 15" 17" 19" 21" 23" 25" 27" 31" 33" 37" 39"
Overall Frame Width
16" 18" 20" 22" 24" 26" 28" 30" 34" 36" 40" 42"
5'
4'
3'
N/A
N/A
2" ROLLER CENTERS
Size To
Order
Between Rail Width
13"
15"
17"
19"
21"
23"
25"
27"
31"
33"
37"
39"
Overall Frame Width
16"
18"
20"
22"
24"
26"
28"
30"
34"
36"
40"
42"
5'
4'
3'
N/A
N/A
FLOOR SUPPORTS • GUARD RAILS
Not Included in Base Price. Use Chart Below for
Required Elevation.		 Adjustable Universal Channel Guard Rail
Both Sides..........per foot..............................$16.00
One Side............per foot..............................$8.20
"RS" SUPPORT
Model No. Adjustment Top of Belt Price Each
RS-1
16 7/16" to 18 3/16"
RS-1.2
17 7/16" to 19 3/16"
RS-1.4
18 7/16" to 20 3/16"
RS-2
19 7/16" to 22 7/16"
RS-3
21 15/16" to 24 15/16"
RS-4
24 15/16" to 30 15/16"
RS-5
28 15/16" to 34 15/16"
RS-6
32 15/16" to 44 15/16"
RS-7
42 15/16" to 54 15/16"
RS-8
54 15/16" to 66 15/16"
RS-9
66 15/16" to 78 15/16"
RS-10
78 15/16" to 90 15/16"
RS-11
88 15/16" to 100 15/16"
RS-12
100 15/16" to 112 15/16"
Angle Type
Type "A"
Prices are for Both Sides.
1-1/2" x 1-1/2" x 12 Ga....per foot................$8.20
Type "B"
Prices are for Both Sides.
1-1/2" x 1-1/2" x 12 Ga....per foot................$8.20
• Additional Motor (Requires an additional motor
with 2" R/C)
Add On..............per motor..........................$724.00
(Maximum 3 motors powered from 4 AMP power
supply)
• Less 4 AMP Power Supply
.........................deduct...............................$423.70
• Speed Up Spool
(Specify)......................................................N/C
NOTE: RS-7 to RS-12: Knee Braces included in price.
Knee braces Per pair ............................................................ $31.80
IMPORTANT NOTES. . .
• WHEN ORDERING
Please specify section to which Gate Assembly will be hinging from and resting on..
• NOTE: 3' Gate is standard with (1) motor. 4' and 5' Gates are standard with (2) motors.
• NOTE: Gate is ONE DIRECTION ONLY. Contact us for Reversing Application.
TC-250 TRAFFIC COP
The Traffic Cop controls product flow from one
conveyor onto another. It allows products from one
line of traffic to flow freely, without interference from
another converging line of traffic. This eliminates
collision of products which may cause damage and
disrupt product flow. Specify model, width and
degree.
• 7 arm widths, aluminum
• Available in 30°, 45°, 60°, 90° & 180° applications.
Includes mounting hardware.
• 180° application - 10" minimum required between lines.
• 5 lbs. Minimum Package Weight at 65 FPM Required
to Actuate Arm.
• 250 lbs. Maximum Accumulated Capacity		 traffic cop
Overall Frame Width 16" to 28" 30" to 42"
Price Each

Order Online

Click the button of the item you wish to purchase.

Contact us for special lengths

ELECTRICAL CONTROLS AND DRIVE SECTION
MANUAL START SWITCH or
SAFETY DISCONNECT
 limit switch LIMIT SWITCH, SINGLE POLE,
WITH NYLON ROLLER LEVER
manual start switch
#032.1014......................................... $225.79 #033.2032 & #033.2072..................$589.01
Nema 4
"START-STOP", Nema 1, One direction, 30
AMP, 3 Pole (Single or 3 phase)
LIMIT SWITCH, DOUBLE POLE,
WITH NYLON ROLLER LEVER
limit switch double pole
#033.2033& #033.2072...................$352.04
Nema 4
REVERSING DRUM SWITCH
#032.103.......................................... $905.51
"Fwd-Stop-Rev", Nema 1, for 1-1/2 HP at
115 volts or 2 HP at 230 volts single phase,
or 2 HP max. three phase
PROXIMITY SWITCH, INDUCTIVE,
(METAL SENSING)

#032.210.........................................$217.67
115 Volt AC, two wire with ground, 30mm dia.,
10mm range
foot swtich with guard FOOT SWITCH WITH GUARD
#032.211.........................................$257.68
24 Volt DC, two wire with ground, 30mm dia.,
10mm range
#032.200........................................... $286.50
(Constant Pressure) "On-Off" type, Nema 1,
Pilot Control or 1 HP max. single phase.
PHOTO EYE, ON-OFF TYPE
power cord and plug #EA-000005......................................$1,122.83
Banner Q45 Retro Reflective Photo Eye Kit
with timing module, reflector and mounting
brackets. Photo Eye output is one form C
type relay, Operating voltage
24-250VAC/12-250VDC
POWER CORD AND PLUG (20')
POWER CORD WITH PLUG ONLY 20' LONG
Model No.
Voltage
HP Rating
Prices
EA-039-1A
115/1
1/2-3/4
EA-039-2A
115/1
1
EA-039-3A
115/1
1 1/2
EA-039-4A
230/1
1/2-1
EA-039-5A
230/1
1 1/2-2
EA-039-6A
208-230/3
1/2-2
EA-039-7A
460/3
1/2-2
POWER CORD WITH PLUG 20' LONG WITH MANUAL START SWITCH AND MOUNTING BRACKET
Model No.
Voltage
HP Rating
Prices
EA-039-1B
115/1
1/2-3/4
EA-039-2B
115/1
1
EA-039-3B
115/1
1 1/2
EA-039-4B
230/1
1/2-1
EA-039-5B
230/1
1 1/2-2
EA-039-6B
208-230/3
1/2-2
EA-039-7B
460/3
1/2-2
MOUNTING BRACKETS FOR PHOTO
EYE #033.2122
B-05165...........................................$125.19
AIR PRESSURE SWITCH
#094.191........................................$732.79
Nema 4
EMERG. STOP PULL CORD SWITCH
#032.285 with 032.2851 Turnbuckle
...........................................................$737.85
Nema 4
"RED" EMERGENCY PULL CORD
CABLE AND MOUNTING HARDWARE
#032.281...one side.................$7.88 per / ft.
both sides..............$16.83 per / ft.
EMERGENCY PUSH BUTTON
#032.284..........................................$296.39
Nema 4
PHOTO EYE, 18MM DIA., DIFFUSED,
(PHOTO PROX.) 115 VOLT, LIGHT
OPERATE, 2-METER CABLE
#032.2113 (100mm range, 3.94")....$1,130.24
#032.2116 (200mm range, 7.87")....$205.79
#033.218 (400mm range, 15.74")....$311.09
NOTE: PRICING LISTED NOT MOUNTED
OR WIRED 		"PHOTO EYE, RETRO-REFLECTIVE,
(POLARIZED) 24 VOLT DC
#033.2128 with 032.21122 Cable.....$253.44
#032.21122 (Cable Only)...................$76.71

Order Online

Click the button of the item you wish to purchase.

Contact us for special lengths

CONTROLLER PRICES
AC VARIABLE SPEED CONTROLLER ONLY
SINGLE PHASE CONTROLLER INPUT
Motor Size 115 Volt 208/230 Volt
1/2 VSC-12-10 VSC-12-12
Price $1,581.35 $1,260.73
1 VSC-12-11 VSC-12-13
Price $1,827.73
2 N/A
VSC-12-14
Price ~
THREE PHASE CONTROLLER INPUT
Motor Size 208/230 Volt 460 Volt 575 Volt
1/2
VSC-01-15
VSC-01-18
VSC-12-29
Price
1
VSC-01-16
VSC-01-19
VSC-12-29
Price
2
VSC-01-17
VSC01--20
VSC-12-30
Price
REPLACEMENT INVERTER DUTY
ENERGY EFFICIENT MOTORS
HP Part No. Price
1/2 032.351 230/460
1 032.353 230/460
2 032.355 230/460
1/2 032.3512 575
1 032.3532 575
2 032.3552 575
IMPORTANT NOTES...
• All above motors are 230 / 460 / 575 Volt, 3 Phase.
• All above V/S Drive Kits include NEMA 1 / IP30
Junction Box, Controller and Motor.
• Good for cycle rates of up to 15 cycles per minute, at
1/2 second ramp time, with a maximum speed of 250
FPM.
• Drawing No. DG-001146.
OPTIONAL: Mounting and Wiring Add-On . . .
(mounted close to the motor)		 $715.70
Brake Relay Kit (EA-068A).............................. $575.24 • When AC Variable Speed Controller is used with a
Brake Motor, A Brake Relay Kit (EA-068A) is
required. Add an additional $575.24 for this option.)
ELECTRONIC CLUTCH BRAKE DRIVE PACKAGE
Part No. Description Price
EA-VSC-01-CB 2 HP Electronic Clutch-Brake Kit $5,361.50
OPTIONAL: Mounting and Wiring Add-on .
(mounted close to the motor)		 $715.70
KIT INCLUDES
Part No. Description
VSC-01-20 AC Variable Speed Controller, 460 Volt, 3 Phase
032.345 2 HP 460 Volt, 3 Phase, C-Face Motor TEBC
(Blower Cooled) With 5AC Reducer and #60 Chain
and Sprockets
IMPORTANT NOTES
• Good for cycle rates of up to 60 cycles per minute.
• 1/10 second Accel and Decel time, with 350 FPM
Maximum Speed.
• 230 or 460 Volt Only, Other Voltages, Contact us.
• Motor Cooling Blower is 115 Volt, 1 Phase, 60 Hz.
• Price Includes 5AC Reducer and #60 Chain and
Sprockets
Part No. Description
VSC-01-17 AC Variable Speed Controller, 230 Volt, 3 Phase
032.345 2 HP 230 Volt, 3 Phase, C-Face Motor TEBC
(Blower Cooled) With 5AC Reducer and #60 Chain
and Sprockets

Order Online

Click the button of the item you wish to purchase.

Contact us for special lengths

• "Start-Stop" Push-button Station • "Start-Stop"Push-button Station
033.1955 $223.91 033.195................................................. $151.10
Remote mounted, Nema 1 To be mounted in Mag Starter Cover
• "Fwd-Rev-Stop" Push-button Station • "Fwd-Rev-Stop"Push Button Station
033.1965 $420.87 033.196.................................................. $520.41
Remote mounted, Nema 1 To be mounted in Mag Starter Cover
• "Up-Down-Stop" Push-button Station
033.1975 $420.87 • Mounting Brackets for photo eye
Remote mounted, Nema 1
#033.2122
B-05165 ..............................................		 $125.19
190ACC CONVEYOR WEIGHT TABLE
SIZE TO
ORDER
Overall
Length "A" 		Between Rail Width 13" 15" 17" 19" 21" 23" 25" 27" 31" 33" 37" 39"
Overall Frame Width 16" 18" 20" 22" 24" 26" 28" 30" 34" 36" 40" 42"
5' Weights
(Lbs.)
Weights
Based
on 3"
Roller
Centers		 231 238 252 263 277 289 299 314 337 350 375 387
10' 370 384 410 429 455 477 495 522 564 588 633 655
15' 509 530 568 595 633 665 691 730 791 826 891 923
20' 648 676 726 761 811 853 887 938 1018 1064 1149 1191
25' 787 822 884 927 989 1041 1083 1146 1245 1302 1407 1459
30' 926 968 1042 1093 1167 1229 1279 1354 1472 1540 1665 1727
35' 1065 1114 1200 1259 1345 1417 1475 1562 1699 1778 1923 1995
40' 1204 1260 1358 1425 1523 1605 1671 1770 1926 2016 2181 2263
45' 1343 1406 1516 1591 1701 1793 1867 1978 2153 2254 2439 2531
50' 1482 1552 1674 1757 1879 1981 2063 2186 2380 2492 2697 2799
55' 1621 1698 1832 1923 2057 2169 2259 2394 2607 2730 2955 3067
60' 1760 1844 1990 2089 2235 2357 2455 2602 2834 2968 3213 3335
65' 1899 1990 2148 2255 2413 2545 2651 2810 3061 3206 3471 3603
70' 2038 2136 2306 2421 2591 2733 2847 3018 3288 3444 4503 3871
75' 2177 2282 2464 2587 2769 2921 3043 3226 3515 3682 3987 4139
80' 2316 2428 2622 2753 2947 3109 3239 3434 3742 3920 4245 4407
85' 2455 2574 2780 2919 3125 3297 3435 3642 3969 4158 3503 4675
90' 2594 2720 2938 3085 3303 3485 3631 3850 4196 4396 4761 4943
95' 2733 2886 3096 3251 3481 3673 3827 4058 4423 4634 5019 5211
100' 2872 3012 3254 3417 3659 3861 4023 4266 4650 4872 5277 5479
All weights are conveyor weights only. Accessories, crating, etc., are not included.
NOTE: 16", 20", 22", 26", 28", 34", 36", 40" & 42" Overall Frame Widths - 1 Week Stockyard
NOTE: Intermediate bed sections are available in multiples of 4 ft., 5 ft., 6 ft., 7 1/2 ft., 8 ft., and 10 ft. lengths only.
Accumulating Conveyor, Power Conveyor, Conveyor, Live Roller Conveyors, Powered Live Roller, Conveyors,
and Roller Conveyors from your source for material handling equipment.