MODEL 138-ACC
|
|
HORIZONTAL POWER CONVEYOR
(ACCUMULATING TYPE)
|
 |
|
The simplest method ever devised for
accumulating cartons, boxes, etc.
Basic design eliminates complicated
adjustments and allows a minimum
of 2% back pressure. |
|
|
|
• 4 Bed Widths
• 2% Minimum Back Pressure
• Finger Tip Snub Roller Adjustment,
No Tools Needed
• Reversible
• Adjustable LS-Type Floor Supports
Available |
|
|
|
 |
|
|
STANDARD SPECIFICATIONS
|
|
|
|
BED - Roller bed with 1-3/8 in. dia. roller x 18 ga.
galvanized tube spaced every 5/16 in. HRS hex shaft
spaced every 1-1/2 in. and 1-3/8 in. dia. pressure
roller x 18 ga. galvanized tube spaced every 3 in.
Mounted in 6-1/2 in. x 12 ga. powder painted
formed steel channel frame bolted together with butt
couplings. |
|
BEARINGS - Sealed, pre-lubricated ball bearings
with eccentric lock collar on flange and pillow block
bearings. Pre-lubricated ball bearings in tread &
pressure rollers. |
|
|
|
SPEED REDUCTION - Sealed worm gear C-Face
speed reducer. No. 50 roller chain to drive shaft. |
|
|
CROSS BRACING - Rods with turnbuckles are
fastened to underside of bed to provide proper
alignment of bed rollers and insure correct product
tracking. Supplied on every other section, 20 ft.
bed lengths and over. Supplied on bed lengths 9 ft.
and over. |
|
|
|
MOTOR - 1/2 HP-208/230/460/575V-3 Ph.
60 Hz. Totally Enclosed C-Face. |
|
|
|
CONVEYING SPEED - Constant 65 FPM. |
|
|
|
CAPACITY - Maximum load per linear foot of
conveyor 50 lbs. NOT TO EXCEED capacity in
chart. |
|
|
DRIVE - Mounted underneath, placed near center
of conveyor. |
|
|
|
|
|
FLOOR SUPPORTS - Now supplied as optional
equipment. |
DRIVE BELT - Endless B-section aramid core
V-Belt drives each section of conveyor. |
|
|
|
|
|
|
RETURN TAKE-UP SHEAVE - 3-1/4 in. dia. x
1/2 in. bore flat idler has seven position adjustment to
maintain proper V-belt tension. |
|
|
|
|
|
|
| HOW IT WORKS! |
|
The driving of the tread rollers on the minimum pressure conveyor is accomplished with the top surface of a standard
section endless V-belt. The strength and wear qualities of the tread rollers and this belt have been thoroughly tested
for continuous duty.
|
|
|
|
|
To maintain the driving of the tread roller, the pressure roller is mounted in spring adjusted carriers (See Photo below)
which sense the required driving friction regardless of the length of accumulated load. This pressure can be maintained
constantly to give a 2% minimum back pressure in either a forward or reverse direction. |
|
|
|
|
In the event of extreme changes in unit load (weight of box or package), convenient knurled thumb adjusting nuts can
be turned to accept this heavier load. |
|
|
|
|
This method eliminates the need for selecting proper tension spring holes in trigger mechanisms or jogging cleats on
driving belt and eccentric (off center) tread rollers. |
|
|
|
|
By maintaining a constant minimum pressure on the tread rollers, long loads may be conveyed, accumulated or stopped
on the conveyor at any point using very little motor horsepower and giving practically no pressure between boxes or
packages. |
|
|
|
|
 |
|
|
|
|
|
LOAD CAPACITY CHART @ 65 FPM
|
|
HP
|
OVERALL FRAME WIDTH 12" TO 24"
|
|
TOTAL LOAD (LBS.)
|
|
UP TO 100'
|
|
1/2
|
1000
|
|
1
|
1500
|
|
|
|
|
|
|
|
|
|
|
|
|
|
OPTIONAL EQUIPMENT
|
|
|
|
FLOOR SUPPORTS–LS Type floor supports are
available with a wide range of adjustment. Specify top
of belt or roller elevation. One support required at
every bed joint and ends of conveyor. Holes in feet
for lagging to floor. Knee braces recommended
above LS-6 support. |
|
PACKAGE STOPS - Roller or pin type stops
available, contact us. |
|
ROLLER CENTERS - Tread rollers spaced every
1-1/2 in. |
|
|
|
GUARD RAILS - Adjustable Universal Channel
Guard Rail, fixed channel or type A & B angle.
NOTE: If product comes in contact with guard
rails, product flow will be affected.Fixed channel
overlapping, one direction. Fixed channel nonover-
lapping, reversing. |
|
|
CONVEYING SPEED - Other constant and variable
speeds from 25 to 120 FPM. NOTE: Capacity and
accumulation feature affected with speed change. |
|
|
|
SIDE MOUNTED CENTER DRIVE - Motor
reducer unit mounted to side of conveyor. Minimum
elevation with standard sheave retainer 10 in. With
low elevation sheave retainer 8 in. 9-3/8 in. elevation
at drive, 9-7/8 in. elevation with standard sheave return.
8 in. elevation with low elevation sheave return
(intermediate only). |
|
|
|
|
POLY-TIER SUPPORTS - 36 in. to 120 in. support
heights in 6 in. increments. Knee braces supplied. |
|
|
|
CEILING HANGER - 5/8 in. dia. x 8 ft. long un-
plated rods fully threaded. Other lengths and galvanized
rods available. |
|
|
|
MOTORS - Energy efficient, single phase, other
characteristics. 3/4 HP maximum. |
|
|
V-BELT DRIVE - V-Belt supplied between motor
and reducer. Minimum overall drive width 14 in. |
|
|
|
|
ELECTRICAL CONTROLS - Non-reversing or
reversible magnetic starters and push-button stations.
AC variable fequency drive. |
|
|
O-RING DRIVE CHAIN–With sealed in lubricant
(Recommended for applications that do not permit
regular lubrication). |
|
|
|
Click the button of the item you wish to purchase. Contact us for special lengths
|
|
|
|
| PRICES FOR COMPLETE CONVEYOR INCLUDE: |
|
|
|
|
* 1-3/8" Dia. x 18 Ga. Galvanized Roller (rollers on 1.5"
Centers) in a 6-1/2" x 12 Ga. Channel frame.
* Driving V-Belt
* "C" Face Speed Reducer - Sealed Worm Gear
* 1/2 HP - "C" Face Totally Enclosed Motor
(Specify Exact Voltage)
* Totally Enclosed Chain Guard
* 65 FPM Constant Conveying Speed
* End Guards
* Less Electrical Controls
* Less Floor Supports |
|
SIZE TO ORDER Overall Length
"A" |
Between Rail Widths
|
|
10"
|
13"
|
16"
|
22"
|
|
Overall Frame Widths
|
| 12" |
15" |
18" |
24" |
| 5' |
|
|
|
|
| 10' |
|
|
|
|
| 15' |
|
|
|
|
| 20' |
|
|
|
|
| 25' |
|
|
|
|
| 30' |
|
|
|
|
| 35' |
|
|
|
|
| 40' |
|
|
|
|
| 45' |
|
|
|
|
| 50' |
|
|
|
|
| 55' |
|
|
|
|
| 60' |
|
|
|
|
| 65' |
|
|
|
|
| 70' |
|
|
|
|
| 75' |
|
|
|
|
| 80' |
|
|
|
|
| 85' |
|
|
|
|
| 90' |
|
|
|
|
| 95' |
|
|
|
|
| 100' |
|
|
|
|
|
|
|
|
 |
|
|
|
|
|
Conveyor sections are easily coupled together at either
end to make up to 100 ft. long units. Drive is usually
located at center of conveyor length. |
|
|
|
|
|
|
|
| *Refer to the bottom of the page for conveyor weights. |
|
|
|
| IMPORTANT NOTES |
• BED LENGTHS
Intermediate bed sections are available in multiples of 4', 5', 6', 7-1/2', 8', and 10' lengths only. |
• OTHER LENGTHS
Other lengths not listed in price chart are available. For "IN-BETWEEN SIZES", use next larger Overall
Length "A" price. SEE BED LENGHTS BELOW. |
• STANDARD WIDTHS
All standard widths to be offered in 1 FOOT length increments beginning at 10’ OAL. |
|
• OTHER WIDTHS
For "IN-BETWEEN WIDTHS", use next width plus 10%. For widths up to 30" OAW, interpolate plus 10%.
• NON-STANDARD WIDTHS
Contact us for lead time.
• INTERMEDIATE BEDS
Use per foot price of width x required length, supports not included.
• DRIVE LOCATION
Drive is mounted in approximate center of conveyor length on multiple bed lengths only.
• MAXIMUM LENGTH
Maximum Overall Length "A" is 100' with one (1) Drive.
• FLOOR SUPPORTS
Floor supports are not included in base price. There are two (2) stationary floor supports required for the
first bed section and one (1) support required per bed section thereafter.
|
Click the button of the item you wish to purchase. Contact us for special lengths
|
|
|
|
|
|
|
|
|
| PRICES FOR OPTIONAL EQUIPMENT |
|
|
|
|
|
|
|
|
|
| OPTIONAL DRIVE |
|
CONSTANT AND VARIABLE SPEEDS |
DRIVE
TYPE |
OVERALL FRAME WIDTH
|
| 12" TO 24" |
| Underside Drive (V-Belt) |
|
| Side Mounted (C-Face)* |
|
|
|
|
Constant - C-Face Within 25 - 90 FPM... |
No Charge |
|
|
Variable Speed....See Electrical Controls and Drive
Section Below. |
|
|
NOTE: Speeds other than 65 FPM will drastically
affect accumulation feature. |
|
|
|
|
|
|
|
| * 9-1/2" minimum elevation |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
DRIVE COMPONENT DEDUCTS |
| #50 O-Ring Drive Chain ........ Add ........ |
$301.40
|
|
|
|
|
Less Motor Drive, Motor Mount and Guards, but with |
| #60 O-Ring Drive Chain ........ Add ........ |
$409.90
|
|
|
|
|
Shaft Extension..............Deduct............. |
$694.20 |
|
|
|
|
|
|
|
| FLOOR SUPPORTS |
|
|
Less Motor Only (1/2 HP-208/230/460/575V- |
Not included in base price. Use chart below for required
elevation. |
|
|
3 Ph.-60 Hz).............Deduct......................
*Less Reducer..........Deduct...................... |
$258.30 |
|
$307.40 |
|
|
|
|
|
|
|
*Less V-Belt Guard, Chain Guard, sheaves and
sprockets when V-Belt drive is supplied. Less chain
guard and sprockets when C-Face drive is supplied. |
|
| "LS" SUPPORT |
| Model No. |
Adjustment to Top of Roller |
Price Each |
| LSL-1* |
8-3/4" to 9-3/4" |
|
| LSL-2* |
9-3/4" to 11-1/2" |
|
| LSL-3* |
11-1/2" to 14-1/8" |
|
| LS-1* |
14-1/16" to 15-13/16" |
|
| LS-1.2* |
15-1/16" to 16-13/16" |
|
| LS-1.4* |
16-1/16" to 17-13/16" |
|
| LS-2* |
17-1/16" to 20-1/16" |
|
| LS-3 |
19-11/16" to 22-11/16" |
|
| LS-4 |
22-11/16" to 28-11/16" |
|
| LS-5 |
26-11/16" to 32-11/16" |
|
| LS-6 |
30-11/16" to 42-11/16" |
|
| LS-7 |
40-11/16" to 52-11/16" |
|
| LS-8 |
52-11/16" to 64-11/16" |
|
| LS-9 |
64-11/16" to 76-11/16" |
|
| LS-10 |
76-11/16" to 88-11/16" |
|
| LS-11 |
86-11/16" to 98-11/16" |
|
| LS-12 |
98-11/16" to 110-11/16" |
|
|
|
|
|
|
|
|
|
SLAVE CONNECTION KIT |
|
|
For Slave Driving existing curves............... |
$239.80
|
|
|
(Please Provide Sketch) |
|
|
|
|
|
|
GUARD RAILS |
|
|
NOTE: Available in 5' and 10' lengths only from
Stockyard. Contact us for other lengths. |
|
|
Adjustable Universal Channel Guard Rail |
|
|
Both Sides...........per foot......................
One Side..............per foot..................... |
$16.00
$8.20
|
|
|
|
|
|
|
Angle Type
Types "A" or "B" available (specify)
Prices are for both sides |
|
|
|
|
|
|
Type "A"
1" x 1" x 12 Ga...............per foot........... |
|
|
|
$8.20
|
|
|
|
|
|
|
Type "B" (See Note)
1" x 1" x 12 Ga.............. per foot........... |
|
|
|
$9.80
|
|
|
|
|
|
|
Fixed Channel Type
(Prices are for both sides.)
2-1/2" x 1" x 12 Ga........ per foot........... |
|
|
*Less than 18" top of roller elevation- Side Mounted
Drive Required. |
|
|
|
|
$15.90
|
|
|
|
|
|
|
*NOTE: If product comes in contact with guard rails,
product flow will be affected. |
|
NOTE: LS-7 to LS-12: Knee Braces included in price. |
|
|
| Extra Knee Braces........... per pair............... |
|
$31.80
|
|
|
|
|
|
|
|
REPLACEMENT BEDS |
|
|
|
|
|
|
|
| LOW ELEVATION |
|
|
Intermediate Beds - When ordering replacement
intermediate bed sections, use per foot price of
appropriate bed width shown in price chart.
Tail Bed - When ordering replacement tail bed
sections, add an additional................................$571.20
|
Low Elevation Sheave Retainer Bracket to provide
9-1/2" elevation.
(Side mounted drive required. See Optional Drives.) |
|
|
| Add-on per Sheave Retainer Bracket............. |
$177.70
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| POSITIVE DRIVE |
|
PACKAGE STOPS |
(Add-on per foot of conveyor)
1-1/2" roller centers .......................................$94.00
|
|
Angle End Stop
1-1/2" x 1-1/2" x12 Ga. Steel
10" to 22" Between Rail Width................ |
|
|
|
|
$33.65
|
ABEC PACKED SEALED BEARINGS
WITH 5/16" HEX SHAFTS |
|
|
|
|
Raised Roller End Stops
2-1/8" Dia. Roller
10" to 22" Between Rail Width................ |
|
| Per foot add-on |
|
|
|
|
|
$83.40
|
| Between Rail Width |
10" |
13" |
16" |
22" |
| Overall Frame Width |
12" |
15" |
18" |
24" |
Add Per Foot of
Conveyor 1-1/2" Ctrs. |
|
|
|
|
|
|
|
|
|
Hand Operated Stop
(Blade or Roller Types, specify)
10" to 22" Between Rail Width................ |
|
|
|
$570.90
|
|
|
Air Operated Linear Thruster Stop
(Pin, Roller or Blade Types, specify)
13" to 22" Between Rail Width................ |
|
|
|
|
|
| ELECTRICAL CONTROLS |
|
|
|
|
|
$1,803.40
|
| See below. |
|
|
|
|
|
|
|
|
NOTE: Filter Regulator Unit not supplied as standard.
Stops are supplied in NORMALLY DOWN position.
Can be supplied in Normally Up position - Specify. |
|
|
|
| GALVANIZING |
|
|
| Contact us. |
|
|
|
|
|
Click the button of the item you wish to purchase. Contact us for special lengths
| • CEILING HANGERS |
|
Ceiling Hanger Brackets with (2) 5/8" dia. x 8’-0" long unplated
fully threaded rods ...................................................................... |
|
 |
$156.70
|
Ceiling Hanger Brackets with (2) 5/8" dia. x 8’-0" long galvanized
fully threaded rods ....................................................................... |
|
| $187.20
|
Ceiling Hanger Brackets with (2) 5/8" dia. x 10’-0" long unplated fully
threaded rods................................................................................ |
|
| $231.60
|
| Ceiling Hanger Brackets with (2) 5/8" dia. x 10’-0" long galvanized fully threaded rods................................................................................. |
|
| $381.20
|
| Ceiling Hanger Brackets with (2) 5/8" dia. x 12’-0" long unplated fully threaded rods................................................................................. |
|
|
|
|
$384.40
|
|
Ceiling Hanger Brackets with (2) 5/8" dia. x 12’-0" long galvanized fully threaded rods.................................................................................. |
|
|
$444.50
|
|
Ceiling Hanger Brackets, Less Rods Only .................................... |
$98.70
|
|
Extra Length Rods: |
|
|
(2) 8’-0" long x 5/8" dia. unplated fully threaded rods .................. |
$57.40
|
|
(2) 8’-0" long x 5/8" dia. galvanized fully threaded rods ............... |
$88.40
|
|
(2) 10’-0" long x 5/8" dia. unplated fully threaded rods ................ |
$132.70
|
|
(2) 10’-0" long x 5/8" dia. galvanized fully threaded rods ............. |
$282.30
|
|
(2) 12’-0" long x 5/8" dia. unplated fully threaded rods ................ |
$285.80
|
|
(2) 12’-0" long x 5/8" dia. galvanized fully threaded rods ............. |
$346.00
|
|
Hex Coupling Nuts for Rods ......................................................... |
$5.20
|
|
Above noted delivery times determined by delivery time of model ordered. |
|
|
|
| • POLY-TIER SUPPORTS |
 |
|
PRICES FOR COMPLETE
SUPPORT INCLUDE:
|
|
|
|
IMPORTANT NOTES
• Check for Clearance
• Specify type of conveyor to be used.
• Use in place of LS or MS Supports only. |
|
• Painted Steel Support Legs
• Adjustable Cross pipe Assembly
• Knee Braces (1 set per level of
conveyor)
• "U" Brackets
• Single Width Conveyor Only |
|
|
|
|
|
|
|
|
|
|
|
|
CAPACITY DATA:
1500 lbs..............................................per cross pipe
4500 lbs..............................................per set of legs |
|
|
|
|
|
|
|
|
|
|
|
|
| (2) TIER POLY-TIER SUPPORTS |
|
36"
|
|
|
42"
|
|
|
48"
|
|
|
54"
|
|
|
60"
|
|
|
66"
|
|
|
72"
|
|
|
78"
|
|
|
84"
|
|
|
90"
|
|
|
96"
|
|
|
102"
|
|
|
108"
|
|
|
114"
|
|
|
120"
|
|
|
|
| (3) TIER POLY-TIER SUPPORTS |
|
36"
|
|
|
42"
|
|
|
48"
|
|
|
54"
|
|
|
60"
|
|
|
66"
|
|
|
72"
|
|
|
78"
|
|
|
84"
|
|
|
90"
|
|
|
96"
|
|
|
102"
|
|
|
108"
|
|
|
114"
|
|
|
120"
|
|
|
|
|
|
|
|
Click the button of the item you wish to purchase. Contact us for special lengths
|
| MOTORS |
Extra Motor Price for OTHER THAN: 1/2 HP–208/230/460/575 V–3 Ph.–60 Hz.–Totally Enclosed. Speed affects
horsepower requirements. |
|
|
H.P. REQ.
|
TOTALLY ENCLOSED
|
ENERGY EFFICIENT
|
200/208/230/
460/575V
3 Ph.-60 Hz. |
115/230V
1 Ph.-60 Hz. |
230/460V
1 Ph.-60 Hz. |
575V
3 Ph.-60 Hz. |
| 1/2 |
N/C |
|
|
|
| 1 |
N/A |
|
|
|
| 2 |
N/A |
|
|
|
|
|
|
TC-250 TRAFFIC COP
|
|
|
The Traffic Cop controls product flow from one
conveyor onto another. It allows products from one
line of traffic to flow freely, without interference from
another converging line of traffic. This eliminates collision
of products which may cause damage and disrupt
product flow. Specify model, width and degree.
• 7 arm widths, aluminum
• Available in 30°, 45°, 60°, 90° & 180° applications.
Includes mounting hardware.
* 180° application - 10" minimum required between lines. |
|
|
|
|
|
 |
|
|
| Overall Frame Width |
12" to 15" |
18" to 24" |
| Price Each |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
TURNING WHEEL
|
|
Turning Wheels are used in converging 30° and 45° spur applications. Also used at 90° (right angle) transfers where
Traffic Cops, Package Stops and other product flow controlling devices are used. Wheel is mounted on adjustable
bracket to insure proper package orientation through transfer. Can be mounted to slider bed or side channels of
powered and gravity conveyors - specify model where applicable. |
|
|
|
|
|
|
|
|
|
 |
|
|
|
|
|
|
 |
|
|
|
|
|
|
|
B-05568 Turning Wheel Assembly with 6" dia. wheel & mounting
hardware ............................................................................. $130.40
|
|
|
|
|
|
|
Click the button of the item you wish to purchase. Contact us for special lengths
| ELECTRICAL CONTROLS AND DRIVE SECTION |
|
|
|
|
MANUAL START SWITCH or
SAFETY DISCONNECT
|
|
 |
|
|
|
LIMIT SWITCH, SINGLE POLE,
WITH NYLON ROLLER LEVER |
 |
|
|
|
|
| #032.1014......................................... |
$225.79
|
|
|
|
|
#033.2032 & #033.2072..................$589.01
Nema 4 |
"START-STOP", Nema 1, One direction, 30
AMP, 3 Pole (Single or 3 phase) |
|
|
|
|
|
|
|
|
LIMIT SWITCH, DOUBLE POLE,
WITH NYLON ROLLER LEVER |
|
 |
|
|
|
|
|
|
|
|
|
#033.2033& #033.2072...................$352.04
Nema 4 |
|
REVERSING DRUM SWITCH |
|
|
|
|
|
|
#032.103.......................................... |
$905.51
|
|
|
|
 |
|
|
|
|
|
|
|
|
"Fwd-Stop-Rev", Nema 1, for 1-1/2 HP at
115 volts or 2 HP at 230 volts single phase,
or 2 HP max. three phase |
|
|
|
|
|
 |
PROXIMITY SWITCH, INDUCTIVE,
(METAL SENSING) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
#032.210.........................................$217.67
115 Volt AC, two wire with ground, 30mm dia.,
10mm range
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
FOOT SWITCH WITH GUARD |
|
|
|
|
|
|
|
|
|
|
#032.211.........................................$257.68
24 Volt DC, two wire with ground, 30mm dia.,
10mm range |
|
#032.200........................................... $286.50
(Constant Pressure) "On-Off" type, Nema 1,
Pilot Control or 1 HP max. single phase. |
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
PHOTO EYE, ON-OFF TYPE |
 |
|
|
|
|
|
|
|
#EA-000005......................................$1,122.83
Banner Q45 Retro Reflective Photo Eye Kit
with timing module, reflector and mounting
brackets. Photo Eye output is one form C
type relay, Operating voltage
24-250VAC/12-250VDC |
|
POWER CORD AND PLUG (20') |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
POWER CORD WITH PLUG ONLY 20' LONG
|
|
Model No.
|
Voltage
|
HP Rating
|
Prices
|
|
EA-039-1A
|
115/1
|
1/2-3/4
|
|
|
EA-039-2A
|
115/1
|
1
|
|
|
EA-039-3A
|
115/1
|
1 1/2
|
|
|
EA-039-4A
|
230/1
|
1/2-1
|
|
|
EA-039-5A
|
230/1
|
1 1/2-2
|
|
|
EA-039-6A
|
208-230/3
|
1/2-2
|
|
|
EA-039-7A
|
460/3
|
1/2-2
|
|
|
|
|
POWER CORD WITH PLUG 20' LONG WITH MANUAL START SWITCH AND MOUNTING BRACKET
|
|
Model No.
|
Voltage
|
HP Rating
|
Prices
|
|
EA-039-1B
|
115/1
|
1/2-3/4
|
|
|
EA-039-2B
|
115/1
|
1
|
|
|
EA-039-3B
|
115/1
|
1 1/2
|
|
|
EA-039-4B
|
230/1
|
1/2-1
|
|
|
EA-039-5B
|
230/1
|
1 1/2-2
|
|
|
EA-039-6B
|
208-230/3
|
1/2-2
|
|
|
EA-039-7B
|
460/3
|
1/2-2
|
|
|
|
|
|
|
|
|
|
|
|
|
MOUNTING BRACKETS FOR PHOTO
EYE #033.2122 |
|
|
|
|
B-05165...........................................$125.19
|
|
|
|
|
|
|
|
|
|
|
|
 |
AIR PRESSURE SWITCH |
|
#094.191........................................$732.79
Nema 4 |
|
|
|
|
|
|
|
|
|
|
EMERG. STOP PULL CORD SWITCH |
|
|
|
|
|
#032.285 with 032.2851 Turnbuckle
...........................................................$737.85
Nema 4 |
|
|
|
|
|
"RED" EMERGENCY PULL CORD
CABLE AND MOUNTING HARDWARE |
|
|
|
|
|
#032.281...one side.................$7.88
per / ft.
both sides..............$16.83
per / ft. |
|
|
|
|
|
EMERGENCY PUSH BUTTON |
|
|
|
|
|
#032.284..........................................$296.39
Nema 4 |
|
|
|
|
|
|
|
|
PHOTO EYE, 18MM DIA., DIFFUSED,
(PHOTO PROX.) 115 VOLT, LIGHT
OPERATE, 2-METER CABLE |
|
|
|
|
|
#032.2113 (100mm range, 3.94")....$1,130.24
#032.2116 (200mm range, 7.87")....$205.79
#033.218 (400mm range, 15.74")....$311.09
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
NOTE: PRICING LISTED NOT MOUNTED
OR WIRED |
|
|
|
|
"PHOTO EYE, RETRO-REFLECTIVE,
(POLARIZED) 24 VOLT DC |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
#033.2128 with 032.21122 Cable.....$253.44
#032.21122 (Cable Only)...................$76.71
|
Click the button of the item you wish to purchase. Contact us for special lengths
|
CONTROLLER PRICES
|
|
|
|
|
AC VARIABLE SPEED CONTROLLER ONLY
|
|
SINGLE PHASE CONTROLLER INPUT
|
| Motor Size |
115 Volt |
208/230 Volt |
| 1/2 |
VSC-12-10 |
VSC-12-12 |
| Price |
$1,581.35
|
$1,260.73
|
| 1 |
VSC-12-11 |
VSC-12-13 |
| Price |
$1,827.73
|
|
| 2 |
N/A |
VSC-12-14
|
| Price |
~ |
|
|
THREE PHASE CONTROLLER INPUT
|
| Motor Size |
208/230 Volt |
460 Volt |
575 Volt |
| 1/2 |
VSC-01-15
|
VSC-01-18
|
VSC-12-29
|
| Price |
|
|
|
| 1 |
VSC-01-16
|
VSC-01-19
|
VSC-12-29
|
| Price |
|
|
|
| 2 |
VSC-01-17
|
VSC01--20
|
VSC-12-30
|
| Price |
|
|
|
|
|
REPLACEMENT INVERTER DUTY
ENERGY EFFICIENT MOTORS
|
|
| HP |
Part No. |
Price |
| 1/2 |
032.351 230/460 |
|
| 1 |
032.353 230/460 |
|
| 2 |
032.355 230/460 |
|
| 1/2 |
032.3512 575 |
|
| 1 |
032.3532 575 |
|
| 2 |
032.3552 575 |
|
|
|
|
|
|
|
IMPORTANT NOTES...
|
|
|
• All above motors are 230 / 460 / 575 Volt, 3 Phase.
• All above V/S Drive Kits include NEMA 1 / IP30
Junction Box, Controller and Motor.
• Good for cycle rates of up to 15 cycles per minute, at
1/2 second ramp time, with a maximum speed of 250
FPM.
• Drawing No. DG-001146. |
|
|
|
|
|
OPTIONAL: Mounting and Wiring Add-On . . .
(mounted close to the motor) |
$715.70
|
|
|
|
|
|
|
|
| Brake Relay Kit (EA-068A).............................. |
$575.24
|
|
|
• When AC Variable Speed Controller is used with a
Brake Motor, A Brake Relay Kit (EA-068A) is
required. Add an additional $575.24
for this option.) |
|
|
|
|
|
|
ELECTRONIC CLUTCH BRAKE DRIVE PACKAGE
|
| Part No. |
Description |
Price |
| EA-VSC-01-CB |
2 HP Electronic Clutch-Brake Kit |
$5,361.50
|
|
|
|
|
|
OPTIONAL: Mounting and Wiring Add-on .
(mounted close to the motor) |
$715.70
|
|
|
|
|
|
|
|
KIT INCLUDES
|
|
|
|
| Part No. |
Description |
| VSC-01-20 |
AC Variable Speed Controller, 460 Volt, 3 Phase |
| 032.345 |
2 HP 460 Volt, 3 Phase, C-Face Motor TEBC
(Blower Cooled) With 5AC Reducer and #60 Chain
and Sprockets |
|
|
|
|
|
IMPORTANT NOTES
|
|
• Good for cycle rates of up to 60 cycles per minute.
• 1/10 second Accel and Decel time, with 350 FPM
Maximum Speed.
• 230 or 460 Volt Only, Other Voltages, Contact us.
• Motor Cooling Blower is 115 Volt, 1 Phase, 60 Hz.
• Price Includes 5AC Reducer and #60 Chain and
Sprockets |
| Part No. |
Description |
| VSC-01-17 |
AC Variable Speed Controller, 230 Volt, 3 Phase |
| 032.345 |
2 HP 230 Volt, 3 Phase, C-Face Motor TEBC
(Blower Cooled) With 5AC Reducer and #60 Chain
and Sprockets |
|
|
|
|
|
Click the button of the item you wish to purchase. Contact us for special lengths
| • "Start-Stop" Push-button Station |
|
|
• "Start-Stop"Push-button Station |
| 033.1955 |
$223.91
|
|
|
|
033.195................................................. |
$151.10
|
| Remote mounted, Nema 1 |
|
|
|
To be mounted in Mag Starter Cover |
|
|
|
|
|
|
|
|
|
|
| • "Fwd-Rev-Stop" Push-button Station |
|
|
• "Fwd-Rev-Stop"Push Button Station |
| 033.1965 |
$420.87
|
|
|
|
033.196.................................................. |
$520.41
|
| Remote mounted, Nema 1 |
|
|
|
To be mounted in Mag Starter Cover |
|
|
|
|
|
|
|
|
|
|
| • "Up-Down-Stop" Push-button Station |
|
|
|
| 033.1975 |
$420.87
|
|
|
• Mounting Brackets for photo eye |
| Remote mounted, Nema 1 |
|
|
|
|
|
#033.2122
B-05165 .............................................. |
$125.19
|
|
|
|
|
|
|
|
|
| SIZE TO ORDER Overall Length "A" |
Between Rail Width |
10" |
13" |
16" |
22" |
| Overall Frame Width |
12" |
15" |
18" |
24" |
| 5' |
Weights
(Lbs.)
Weights
Based on
1 1/2" Roller
Centers |
214 |
231 |
249 |
284 |
| 10' |
337 |
369 |
402 |
466 |
| 15' |
461 |
507 |
555 |
648 |
| 20' |
584 |
645 |
708 |
830 |
| 25' |
708 |
783 |
861 |
1012 |
| 30' |
831 |
931 |
1014 |
1194 |
| 35' |
955 |
1059 |
1167 |
1376 |
| 40' |
1078 |
1197 |
1320 |
1558 |
| 45' |
1202 |
1335 |
1473 |
1740 |
| 50' |
1325 |
1473 |
1626 |
1922 |
| 55' |
1449 |
1611 |
1779 |
2104 |
| 60' |
1572 |
1749 |
1932 |
2286 |
| 65' |
1696 |
1887 |
2085 |
2468 |
| 70' |
1819 |
2025 |
2238 |
2650 |
| 75' |
1943 |
2163 |
2391 |
2832 |
| 80' |
2066 |
2301 |
2544 |
3014 |
| 85' |
2190 |
2439 |
2697 |
3196 |
| 90' |
2313 |
2577 |
2850 |
3378 |
| 95' |
2437 |
2715 |
3003 |
3560 |
| 100' |
2560 |
2863 |
3156 |
3742 |
|
|
| All weights are conveyor weights only. Accessories, crating, etc., are not included. |
|
Accessories, crating, etc., are not included.
NOTE: Intermediate bed sections are available in multiples of 4 ft., 5 ft., 6 ft., 7 1/2 ft., 8 ft., and 10 ft. lengths only. |
|
Accumulating Conveyor, Conveyor, Live Roller Conveyors, Powered Live Roller, Power Conveyor, Conveyors,
and Roller Conveyors from your source for material handling equipment.
|
|
