MODEL TR
|
|
HORIZONTAL BELT CONVEYOR
(TROUGHED BED)
|
|
|
|
 |
|
|
|
The Model TR, with built-in
guard rails, is ideal for overhead
conveying applications. It easily
conveys boxes, cartons, cases,
bags, etc., as well as loose parts. |
|
|
|
• 10 Belt Widths
• Reversible (with center drive)
• Troughed Bed
• Adjustable MS-Type Floor
Supports Available |
|
|
|
 |
|
8" END DRIVE
|
|
SECTION "X-X"
|
|
|
|
STANDARD SPECIFICATIONS
|
BED – 4 in. deep x 12 ga. formed steel slider bed with
2-1/2 in. deep guards, powder painted. Standard 5 ft. &
10 ft. long sections bolt together with splice plates. |
|
BELT – Ultimate 140 BBS–Nitrile.
TAKE-UP – Take-ups at tail pulley. Provides 4 in.
of belt take-up. |
END DRIVE – Located on discharge end of conveyor,
chain guard on left hand side. |
|
BEARINGS – Sealed, pre-lubricated ball bearings,
self-aligning, ball bearings on drive and tail pulleys. |
DRIVE PULLEY – 4 in. dia. with 1 in. dia. shaft at
bearings or 8 in. dia. with 1-3/16 in. dia. shaft at bearings,
machine crowned and fully lagged. See chart. |
|
SPEED REDUCTION – Sealed worm gear C-Face
speed reducer. No. 50 roller chain to drive pulley. |
|
MOTOR – 1/2 HP–208/230/460/575V–3 Ph.–60 Hz.
Totally Enclosed C-Face.
BELT SPEED – Constant 65 FPM. |
TAIL PULLEY – 4 in. dia. with 1 in. dia. shaft at
bearings, machine crowned. |
|
SNUB IDLER – Adjustable 2-1/8 in. dia. pre-lubricated
ball bearings. Guards included. |
|
CAPACITY – Maximum load per linear foot of con-
veyor 75 lbs. NOT TO EXCEED capacity in charts. |
RETURN IDLER – Adjustable 1.9 in. dia. pre-lubri-
cated ball bearings. |
|
FLOOR SUPPORTS – Now supplied as optional
equipment. |
|
|
LOAD CAPACITY CHART @ 65 FPM W/STANDARD BELT
|
| HP |
BELT WIDTHS TO |
LENGTHS UP TO
|
|
4" Dia. Drive Pulley
|
8" Dia.
Drive Pulley
|
| 11' |
21' |
31' |
41' |
51' |
77' |
102' |
|
DISTRIBUTED LOAD (LBS.)
|
| 1/2 |
16" |
335 |
320 |
310 |
300 |
285 |
260 |
230 |
| 24" |
320 |
300 |
285 |
270 |
255 |
210 |
170 |
| 30" |
300 |
275 |
255 |
235 |
215 |
165 |
115 |
| 1 |
16" |
650 |
635 |
625 |
615 |
605 |
625 |
595 |
| 24" |
635 |
620 |
600 |
585 |
570 |
580 |
540 |
| 30" |
620 |
595 |
575 |
550 |
530 |
535 |
480 |
|
|
|
LOAD CAPACITY CHART 25° INCLINED @ 65 FPM
W/ROUGH TOP BELT
|
|
HP
|
BELT WIDTHS
TO
|
LENGTHS UP TO
|
|
11'
|
21'
|
31'
|
41'
|
51'
|
|
DISTRIBUTED LOAD (LBS.)
|
| 1/2 |
16" |
155 |
145 |
135 |
125 |
110 |
| 24" |
145 |
130 |
115 |
100 |
80 |
| 30" |
135 |
115 |
95 |
75 |
55 |
| 1 |
16" |
310 |
300 |
290 |
280 |
270 |
| 24" |
305 |
285 |
270 |
255 |
240 |
| 30" |
290 |
270 |
250 |
230 |
210 |
|
|
|
|
|
OPTIONAL EQUIPMENT
|
FLOOR SUPPORTS – MS Type floor supports are
available with a wide range of adjustment. Specify top
of belt or roller elevation. One support required at every
bed joint and ends of conveyor. Holes in feet for lagging
to floor. Knee braces recommended above MS-6
support. |
|
UNDERSIDE TAKE-UP – Provides 16 in. of belt
take-up. Extends down 13-1/4 in. from top of belt. |
|
NOSEOVER* – Adjustable, single (0 . to 15 .),
double (0 . to 30 .). |
|
LOWER POWERED FEEDER* – Chain type
driven from tail pulley of inclined conveyor. Underside
take-up required when end drive is used. MS Type
floor supports now supplied as optional equipment.
8 in. dia. drive recommended on conveyor when feeder
exceeds 44-1/2 in.OAL. |
BELT* – White Polymate 100 RMP-COS (cover one
side), Black Trackmate 120 Roughtop with PVC cover,
Brown Polymate Roughtop w/Nitrile cover, Black
Trackmate 533 COS-PVC, Tan Glidetop, Brown Nitrile
Roughtop. |
|
|
GRAVITY BRACKETS – Adjustable bars with 1 in.
dia. pop-out transfer roller to attach wheel or 1-3/8 in.
roller conveyor. Available 11 in. to 25 in. bed widths
only. |
BELT SPEED*– Other constant and variable speeds.
V-belt drive supplied under 17 FPM. |
|
HIGHER SIDES – 4 in., 6 in., 9 in., and 12 in. high
vertical sides (12 in. Maximum). |
|
|
BUTT COUPLINGS – Provides connection to SB,
RB, LR, ACC, ACZ, ABEZ, 190-NSP, 190-NSPEZ,
1.9 in. & 2.0 in. gravity conveyors. Includes 1 in. dia.
popout roller. Center drive or underside take-up recommended. |
OVERHEAD END DRIVE – Motor reducer unit
mounted 9-1/2 in. above belt. Other clearances available,
specify. Chain guard RH side. Minimum elevation 6 in.
with 4 in. drive, 10 in. with 8 in. drive. |
|
SIDE MOUNTED END DRIVE – Motor reducer
unit mounted to LH side of conveyor. Minimum elevation
7 in. with 4 in. drive, 10 in. with 8 in. drive. |
|
PULLEYS – 6 in. tail with 1-3/16 in. dia. shaft at
bearings or 8 in. drive with 1-3/16 in. dia. shaft at bear-
ings. |
CENTER DRIVE – Provides 16 in. of belt take-up.
Minimum elevation 16 in. with 4 in. drive, 17 in. with
8 in. drive. Specify location. Minimum OAL without
modification 63 in. with 4 in. drive, 66 in. with 8 in. drive. |
|
CASTERS – See Accessory section. |
|
POLY-TIER SUPPORTS – 36 in. to 120 in. support
heights in 6 in. increments. Knee braces supplied. |
|
CEILING HANGERS – 5/8 in. dia. x 8 ft. long
unplated rods fully threaded. Other lengths and galvan-
ized rods available. |
LOW ELEVATION SIDE MOUNTED CENTER
DRIVE – Motor-reducer unit mounted to side of con-
veyor. Minimum elevation 13-1/2 in. with 4 in. or 8 in.
drive. |
|
|
MOTORS – Energy effi cient, single phase, brake-
motor, other characteristics. 2 HP maximum. |
STACKED END DRIVE – Minimum elevation 27-3/4"
with V-belt drive, 33- 3/4" with C-Face drive. |
|
ELECTRICAL CONTROLS – One direction manual
start switch, reverse drum switch, non-reversing and
reversible magnetic starters, push button stations. AC
variable frequency drive.
*NOTE: Capacity affected with these options. |
| SHAFT MOUNTED END DRIVE – Contact us. |
|
V-BELT DRIVE – V-Belt supplied between motor and
reducer. Minimum overall drive width 14 in. Allow 65 in. |
|
O-RING DRIVE CHAIN – With sealed in lubricant
(Recommended for applications that do not permit regular
lubrication). |
|
|
Click the button of the item you wish to purchase. Contact us for special lengths
|
|
|
| PRICES FOR COMPLETE CONVEYOR INCLUDE: |
|
|
|
• End Drive, Located on Discharge End of Conveyor,
Chain Guard on Left Hand Side When Standing at Infeed
Looking Toward Discharge
• Black Ultimate 140 BBS Belt
• 12 Ga. Slider Bed
• "C" Face Speed Reducer–Sealed Worm Gear |
|
• 1/2 HP–"C" Face Totally Enclosed Motor (Specify
Exact Voltage)
• Totally Enclosed Chain Guard
• 65 FPM Belt Speed
• Less Electrical Controls
• Less Floor Supports |
|
|
|
SIZE
TO
ORDER
Overall
Length
"A" |
Bed
Length
"L" |
Overall
Length
with
Center
Drive |
Drive
Pulley |
Black Ultimate 140 BBS Belt Widths
|
| 6" |
8" |
10" |
12" |
14" |
16" |
18" |
20" |
24" |
30" |
|
Between Side Guards
|
| 7" |
9" |
11" |
13" |
15" |
17" |
19" |
21" |
25" |
31" |
|
Overall Bed Widths
|
| 8" |
10" |
12" |
14"` |
16" |
18" |
20" |
22" |
26" |
32" |
| 6' |
5' |
6' |
4" Dia. |
|
|
|
|
|
|
|
|
|
|
| 11' |
10' |
11' |
|
|
|
|
|
|
|
|
|
|
| 16' |
15' |
16' |
|
|
|
|
|
|
|
|
|
|
| 21' |
20' |
21' |
|
|
|
|
|
|
|
|
|
|
| 26' |
25' |
26' |
|
|
|
|
|
|
|
|
|
|
| 31' |
30' |
31' |
|
|
|
|
|
|
|
|
|
|
| 36' |
35' |
36' |
|
|
|
|
|
|
|
|
|
|
| 41' |
40' |
41' |
|
|
|
|
|
|
|
|
|
|
| 46' |
45' |
46' |
|
|
|
|
|
|
|
|
|
|
| 51' |
50' |
51' |
|
|
|
|
|
|
|
|
|
|
| 56'-4" |
55' |
56' |
8" Dia. |
|
|
|
|
|
|
|
|
|
|
| 61'-4" |
60' |
61' |
|
|
|
|
|
|
|
|
|
|
| 66'-4" |
65' |
66' |
|
|
|
|
|
|
|
|
|
|
| 71'-4" |
70' |
71' |
|
|
|
|
|
|
|
|
|
|
| 76'-4" |
75' |
76' |
|
|
|
|
|
|
|
|
|
|
| 81'-4" |
80' |
81' |
|
|
|
|
|
|
|
|
|
|
| 86'-4" |
85' |
86' |
|
|
|
|
|
|
|
|
|
|
| 91'-4" |
90' |
91' |
|
|
|
|
|
|
|
|
|
|
| 96'-4" |
95' |
96' |
|
|
|
|
|
|
|
|
|
|
| 101'-4" |
100' |
101' |
|
|
|
|
|
|
|
|
|
|
|
Per Foot Price
|
|
|
|
|
|
|
|
|
|
|
|
| *Refer to the bottom of the page for conveyor weights. |
|
| IMPORTANT NOTES |
• OTHER LENGTHS
Other lengths not listed in price chart are available. For "IN-BETWEEN SIZES", use next larger Overall Length "A"
price. For lengths longer or shorter than those shown in chart, please contact us for lead time.
• MAXIMUM BED WIDTH
Maximum Bed Width is 39" (40" OAW). Contact Us for pricing and application. Requires an 8" drive and 6" tall.
• OTHER WIDTHS
For "IN-BETWEEN WIDTHS", use next width plus 10%. For widths over 32" OAW, contact US.
• NON-STANDARD WIDTHS
Contact us for lead time.
• INTERMEDIATE BEDS
Use per foot price of width x required length, supports not included.
• FLOOR SUPPORTS
FLOOR SUPPORTS ARE NOT INCLUDED IN BASE PRICE.
There are two (2) stationary floor supports required for the first bed section and one
(1) support required per bed section thereafter. |
Click the button of the item you wish to purchase. Contact us for special lengths
|
|
|
|
|
|
PRICES FOR OPTIONAL EQUIPMENT
|
|
|
|
|
|
| OPTIONAL BELTS |
Extra Price Per Foot Conveyor Length "A" (in addition to Black Ultimate 140 BBS Belt regularly furnished).
See chart below. |
|
BELT DESCRIPTION
|
|
PRICES PER FOOT OF CONVEYOR LENGTH "A"
|
Belt
Width |
Tan
Glidetop |
Polymate
100 RMP
-COS
(White) |
Trackmate
533 COS-
PVC
(Black) |
Trackmate
120
Roughtop
with PVC
Cover (Black) |
Polymate
Roughtop
(Brown)
Nitrile-COS |
Pure Gum
Rubber
Roughtop |
High Grip
Longitudinally
Grooved Belt |
| 6" |
|
|
|
|
|
|
|
| 8" |
|
|
|
|
|
|
|
| 10" |
|
|
|
|
|
|
|
| 12" |
|
|
|
|
|
|
|
| 14" |
|
|
|
|
|
|
|
| 16" |
|
|
|
|
|
|
|
| 18" |
|
|
|
|
|
|
|
| 20" |
|
|
|
|
|
|
|
| 24" |
|
|
|
|
|
|
|
| 30" |
|
|
|
|
|
|
|
|
|
|
|
|
|
| CONSTANT AND VARIABLE SPEEDS |
|
|
|
|
|
|
DRIVE COMPONENT DEDUCTS |
Constant C-Face–Within 17-135 FPM ................
....................................................... No Charge
Constant V-Belt–Minimum of 4 FPM ..................
................................ Use V-Belt Drive Add-On
Constant Speeds Below Those Listed Above ......
............................................... Contact us
Variable Speed .... See AC Variable Speed Drives |
|
|
|
|
Less Motor Drive, Motor Mount and Guards, |
|
|
but with Shaft Extension...Deduct................ |
$694.20 |
|
|
Less Motor Only (1/2 HP-208/230/460/575V- |
|
|
3Ph.-60 Hz.)..............Deduct..................... |
$258.30 |
|
|
*Less Reducer...........Deduct...................... |
$307.40 |
|
|
*Less V-Belt Guard, Chain Guard, sheaves and
sprockets when V-Belt drive is supplied. Less chain
guard and sprockets when C-Face drive is supplied. |
|
|
|
| OPTIONAL DRIVES |
|
|
|
|
|
|
| Unified Drives: (Shaft Mounted) |
|
|
HIGHER SIDES |
|
Unified
Drives:
|
10" to 14"
|
16" to 20"
|
22" to 28"
|
34"
|
|
End Drive 4"
Drive Pulley
|
|
|
|
|
|
End Drive 8"
Drive Pulley
|
|
|
|
|
|
Center Drive
4" Drive Pulley
|
|
|
|
|
|
Center Drive
8" Dirve Pulley
|
|
|
|
|
|
|
|
Sides Higher than 2-1/2 per foot both sides:
4" High.......................................................
6" High.......................................................
9" High.......................................................
12' High..................................................... |
|
|
|
$21.10
$24.80
$30.20
$36.90
|
|
|
NOTE 1: For Higher Sides with Style "A" or Style "B"
design, add Higher Side Price to Special Side Price. |
|
|
|
|
|
|
|
|
|
| 4" Drive Pulley |
|
8" Drive Pulley |
|
|
|
|
|
Speed FPM
|
34
|
41
|
52
|
68
|
82
|
103
|
138
|
206
|
274
|
412
|
|
Max HP
|
1/2
|
1/2
|
1/2
|
1
|
1
|
1
|
1
|
1
|
1
|
1
|
|
|
|
Speed FPM
|
65
|
78
|
97
|
130
|
156
|
195
|
260
|
389
|
|
Max HP
|
1
|
1
|
1
|
2
|
2
|
2
|
2
|
2*
|
|
|
|
|
|
|
DRIVE
TYPE |
BED WIDTHS |
| 8" to 22" |
26" |
32" |
|
End Drive (V-Belt)
|
|
|
|
|
End Drive High Cycle (C-Face)
|
|
|
|
|
Side Mounted End (C-Face)
|
|
|
|
|
Side Mounted End (V-Belt)
|
|
|
|
|
Stacked End Drive (C-Face)**
|
|
|
|
|
Stacked End Drive (V-Belt)**
|
|
|
|
|
Center (C-Face)
|
|
|
|
|
Center (V-Belt)
|
|
|
|
|
Side Mounted Center (C-Face)
|
|
|
|
|
Side Mounted Center (V-Belt)
|
|
|
|
|
Center w/ Ext. Take-Up C-Face
|
|
|
|
|
Center w/ Ext. Take-Up V-Belt
|
|
|
|
|
High Perf. Center C-Face
|
|
|
|
|
Heavy Duty Center C-Face
|
|
|
|
|
|
|
|
NOTE 2: Special Sides Not Available with Side
Mounted Center and Overhead Drive. |
|
|
|
|
|
|
|
|
FILLER PLATES |
|
|
|
For 2-1/2" to 6" High Guards
per joint................................................... |
|
|
|
|
$76.60
|
|
|
|
|
|
|
|
For 4" to 12" High Guards
per joint ................................................. |
|
|
|
|
$76.60
|
|
|
|
|
|
|
|
|
LARGER DRIVE OR TAIL PULLEY |
|
|
|
|
Bed Widths
|
8" Dia. Drive
Pulley in Lieu
of 4" Dia.
|
6" Dia. Tail
Pulley in Lieu
of 4" Dia.
|
| 8" 10" 12" |
|
|
| 14" 16" 18" |
|
|
| 20" 22" 26" |
|
|
| 32" |
|
|
|
|
|
|
|
|
|
|
|
NOSEOVER |
|
|
|
|
|
|
|
|
|
|
Adjustable type. Support not included in base
price. DOES NOT include bed length. |
#50 O-Ring Drive Chain..........Add...........$301.40
**Minimum elevation 28-1/16" with V-belt Drive,
33-3/16" with C-face drive.. |
|
|
|
|
|
|
Single.......(0° to 15°)...................................
Double.....(0° to 30°)................................... |
$361.90
|
|
|
|
|
|
$511.10
|
| UNDERSIDE TAKE-UP |
|
|
|
|
|
|
NOTE: Brakemotor required on Incline or Decline
Units greater than 10°. |
Provides 16" of Belt Take-Up on Long Units. Required
on Incline Units with Power Feeders and End Drives. |
|
|
|
|
|
|
|
|
|
|
|
|
|
COUPLING HARDWARE |
|
| BED WIDTHS |
PRICE |
| 8" to 16" |
|
| 18" to 22" |
|
| 26" to 32" |
|
|
|
|
|
|
|
*Gravity Conveyor Bracket with Pop-Out
Roller...per end......................................... |
|
|
|
|
$92.40
|
|
|
|
Butt Couplings with Pop-Out Roller..........
..........per end........................................... |
|
|
|
|
$85.90
|
|
|
|
|
|
Nose Roller Assembly - 1-1/8" Dia. ............per end .......................................... |
|
|
ELECTRICAL CONTROLS |
|
|
|
|
$588.90
|
|
(See bottom of page) |
|
|
|
NOTE: Center drive required if nose rollers used on each end |
|
|
|
|
|
|
|
|
|
|
GALVANIZING |
|
|
|
Contact Us |
|
Tail Pulley - 2-1/4" Dia. ............per end... |
$224.00
|
|
|
|
|
|
*Thru 24" Wide Belt Only. |
|
Click the button of the item you wish to purchase. Contact us for special lengths
| MOTORS |
Extra Motor Price for OTHER THAN: 1/2 HP–208/230/460/575 V–3 Ph.–60 Hz.–Totally Enclosed. Speed
affects horsepower requirements. |
|
H.P.
REQ.
|
TOTALLY ENCLOSED
|
PREMIUM ENERGY EFFICIENT
|
BRAKEMOTORS
|
|
200/208/230/
460/575V
3 Ph.-60 Hz.
|
115/230V
1 Ph.-60 Hz.
|
230/460V
3 Ph.-60 Hz.
|
575V 3
Ph.-60 Hz.
|
Holding Brake
208/230/
460/575V
3 Ph.-60Hz.
|
Cycling Brake 208/230/
460/575V*
3 Ph.-60Hz.
|
Cycling Brake 208/230/
460/575V*
3 Ph.-60Hz.
|
Holding Brake
115/230V
1 Ph.-60Hz.
|
| 1/2 |
N/C |
|
|
|
N/A
|
N/A
|
N/A |
N/A |
| 1 |
N/A |
|
|
|
|
|
|
|
| 2 |
N/A |
|
|
|
|
|
|
|
|
| *575V - Prices coded in light blue call for lead time. |
|
* NOTE: "Cycling Brakemotors" are used for indexing and are rated for 30 cycles per minute. Add-On Prices Include 5AC
Reducer, Heavy Duty Motor Base Plate, and #50 Chain and Sprockets with Taper Bushed Hubs.
** NOTE: "Cycling Brakemotor" Add-On Prices Include 5AC Reducer, Heavy Duty Motor Base Plate and Timing Belt Drive.
NOTE: Holding Brake Motors are NOT rated for cycling.
NOTE: "Cycling Brakemotors" require Heavy Duty End Drive or Center Drive. |
|
| POLY-TIER SUPPORTS |
 |
|
PRICES FOR COMPLETE
SUPPORT INCLUDE:
|
|
|
|
IMPORTANT NOTES
• Check for Clearance
• Specify type of conveyor to be used.
• Use in place of LS or MS Supports only. |
|
• Painted Steel Support Legs
• Adjustable Cross pipe Assembly
• Knee Braces (1 set per level of
conveyor)
• "U" Brackets
• Single Width Conveyor Only |
|
|
|
|
|
|
|
|
|
|
|
|
CAPACITY DATA:
1500 lbs..............................................per cross pipe
4500 lbs..............................................per set of legs |
|
|
|
|
|
|
|
|
|
|
|
|
| (2) TIER POLY-TIER SUPPORTS |
|
36"
|
|
|
42"
|
|
|
48"
|
|
|
54"
|
|
|
60"
|
|
|
66"
|
|
|
72"
|
|
|
78"
|
|
|
84"
|
|
|
90"
|
|
|
96"
|
|
|
102"
|
|
|
108"
|
|
|
114"
|
|
|
120"
|
|
|
|
| (3) TIER POLY-TIER SUPPORTS |
|
36"
|
|
|
42"
|
|
|
48"
|
|
|
54"
|
|
|
60"
|
|
|
66"
|
|
|
72"
|
|
|
78"
|
|
|
84"
|
|
|
90"
|
|
|
96"
|
|
|
102"
|
|
|
108"
|
|
|
114"
|
|
|
120"
|
|
|
|
|
|
|
|
Click the button of the item you wish to purchase. Contact us for special lengths
|
POWER FEEDER
|
Prices for Powered Feeder Include:
Black Ultimate 140 BBS Belt, Bed, Drive & Tail Pulleys
NOTE: Adjustable Floor Supports Not Included In Base
Price
NOTE: Overall length of 29-1/2" requires 1 support.
Overall length of 44-1/2" or more requires 2 supports.
Gravity Conveyor Bracket with "Pop-Out" Roller
on Tail End (Through 24" Wide Belt Only) |
|
NOTE: NO DEDUCT for Feeders less than minimum
lengths. Shorter lengths COULD CAUSE IMPROPER
BELT TRACKING.
NOTE: With System End Roller Assembly Add 6"
to OAL. Underside Take-Up required on Incline
Units with Power Feeders and End Drives. |
|
|
| CHAIN DRIVEN TYPE |
| Belt Width |
6" |
8" |
10" |
12" |
14" |
16" |
18" |
20" |
24" |
30" |
| Min. Length Overall |
29 1/2" |
29 1/2" |
29 1/2" |
29 1/2" |
44 1/2" |
44 1/2" |
44 1/2" |
44 1/2" |
59 1/2"
|
71 1/2"
|
| Price |
|
|
|
|
|
|
|
|
|
|
| Price Per Foot |
|
|
|
|
|
|
|
|
|
|
|
| #50 O-Ring Chain on Slave Connection. ........... Add ..................... $215.70
|
Click the button of the item you wish to purchase. Contact us for special lengths
| ELECTRICAL CONTROLS AND DRIVE SECTION |
|
|
|
|
MANUAL START SWITCH or
SAFETY DISCONNECT
|
|
 |
|
|
|
LIMIT SWITCH, SINGLE POLE,
WITH NYLON ROLLER LEVER |
 |
|
|
|
|
| #032.1014......................................... |
$225.79
|
|
|
|
|
#033.2032 & #033.2072..................$589.01
Nema 4 |
"START-STOP", Nema 1, One direction, 30
AMP, 3 Pole (Single or 3 phase) |
|
|
|
|
|
|
|
|
LIMIT SWITCH, DOUBLE POLE,
WITH NYLON ROLLER LEVER |
|
 |
|
|
|
|
|
|
|
|
|
#033.2033& #033.2072...................$352.04
Nema 4 |
|
REVERSING DRUM SWITCH |
|
|
|
|
|
|
#032.103.......................................... |
$905.51
|
|
|
|
 |
|
|
|
|
|
|
|
|
"Fwd-Stop-Rev", Nema 1, for 1-1/2 HP at
115 volts or 2 HP at 230 volts single phase,
or 2 HP max. three phase |
|
|
|
|
|
 |
PROXIMITY SWITCH, INDUCTIVE,
(METAL SENSING) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
#032.210.........................................$217.67
115 Volt AC, two wire with ground, 30mm dia.,
10mm range
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
FOOT SWITCH WITH GUARD |
|
|
|
|
|
|
|
|
|
|
#032.211.........................................$257.68
24 Volt DC, two wire with ground, 30mm dia.,
10mm range |
|
#032.200........................................... $286.50
(Constant Pressure) "On-Off" type, Nema 1,
Pilot Control or 1 HP max. single phase. |
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
PHOTO EYE, ON-OFF TYPE |
 |
|
|
|
|
|
|
|
#EA-000005......................................$1,122.83
Banner Q45 Retro Reflective Photo Eye Kit
with timing module, reflector and mounting
brackets. Photo Eye output is one form C
type relay, Operating voltage
24-250VAC/12-250VDC |
|
POWER CORD AND PLUG (20') |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
POWER CORD WITH PLUG ONLY 20' LONG
|
|
Model No.
|
Voltage
|
HP Rating
|
Prices
|
|
EA-039-1A
|
115/1
|
1/2-3/4
|
|
|
EA-039-2A
|
115/1
|
1
|
|
|
EA-039-3A
|
115/1
|
1 1/2
|
|
|
EA-039-4A
|
230/1
|
1/2-1
|
|
|
EA-039-5A
|
230/1
|
1 1/2-2
|
|
|
EA-039-6A
|
208-230/3
|
1/2-2
|
|
|
EA-039-7A
|
460/3
|
1/2-2
|
|
|
|
|
POWER CORD WITH PLUG 20' LONG WITH MANUAL START SWITCH AND MOUNTING BRACKET
|
|
Model No.
|
Voltage
|
HP Rating
|
Prices
|
|
EA-039-1B
|
115/1
|
1/2-3/4
|
|
|
EA-039-2B
|
115/1
|
1
|
|
|
EA-039-3B
|
115/1
|
1 1/2
|
|
|
EA-039-4B
|
230/1
|
1/2-1
|
|
|
EA-039-5B
|
230/1
|
1 1/2-2
|
|
|
EA-039-6B
|
208-230/3
|
1/2-2
|
|
|
EA-039-7B
|
460/3
|
1/2-2
|
|
|
|
|
|
|
|
|
|
|
|
|
MOUNTING BRACKETS FOR PHOTO
EYE #033.2122 |
|
|
|
|
B-05165...........................................$125.19
|
|
|
|
|
|
|
|
|
|
|
|
 |
AIR PRESSURE SWITCH |
|
#094.191........................................$732.79
Nema 4 |
|
|
|
|
|
|
|
|
|
|
EMERG. STOP PULL CORD SWITCH |
|
|
|
|
|
#032.285 with 032.2851 Turnbuckle
...........................................................$737.85
Nema 4 |
|
|
|
|
|
"RED" EMERGENCY PULL CORD
CABLE AND MOUNTING HARDWARE |
|
|
|
|
|
#032.281...one side.................$7.88
per / ft.
both sides..............$16.83
per / ft. |
|
|
|
|
|
EMERGENCY PUSH BUTTON |
|
|
|
|
|
#032.284..........................................$296.39
Nema 4 |
|
|
|
|
|
|
|
|
PHOTO EYE, 18MM DIA., DIFFUSED,
(PHOTO PROX.) 115 VOLT, LIGHT
OPERATE, 2-METER CABLE |
|
|
|
|
|
#032.2113 (100mm range, 3.94")....$1,130.24
#032.2116 (200mm range, 7.87")....$205.79
#033.218 (400mm range, 15.74")....$311.09
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
NOTE: PRICING LISTED NOT MOUNTED
OR WIRED |
|
|
|
|
"PHOTO EYE, RETRO-REFLECTIVE,
(POLARIZED) 24 VOLT DC |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
#033.2128 with 032.21122 Cable.....$253.44
#032.21122 (Cable Only)...................$76.71
|
Click the button of the item you wish to purchase. Contact us for special lengths
|
CONTROLLER PRICES
|
|
|
|
|
AC VARIABLE SPEED CONTROLLER ONLY
|
|
SINGLE PHASE CONTROLLER INPUT
|
| Motor Size |
115 Volt |
208/230 Volt |
| 1/2 |
VSC-12-10 |
VSC-12-12 |
| Price |
$1,581.35
|
$1,260.73
|
| 1 |
VSC-12-11 |
VSC-12-13 |
| Price |
$1,827.73
|
|
| 2 |
N/A |
VSC-12-14
|
| Price |
~ |
|
|
THREE PHASE CONTROLLER INPUT
|
| Motor Size |
208/230 Volt |
460 Volt |
575 Volt |
| 1/2 |
VSC-01-15
|
VSC-01-18
|
VSC-12-29
|
| Price |
|
|
|
| 1 |
VSC-01-16
|
VSC-01-19
|
VSC-12-29
|
| Price |
|
|
|
| 2 |
VSC-01-17
|
VSC01--20
|
VSC-12-30
|
| Price |
|
|
|
|
|
REPLACEMENT INVERTER DUTY
ENERGY EFFICIENT MOTORS
|
|
| HP |
Part No. |
Price |
| 1/2 |
032.351 230/460 |
|
| 1 |
032.353 230/460 |
|
| 2 |
032.355 230/460 |
|
| 1/2 |
032.3512 575 |
|
| 1 |
032.3532 575 |
|
| 2 |
032.3552 575 |
|
|
|
|
|
|
|
IMPORTANT NOTES...
|
|
|
• All above motors are 230 / 460 / 575 Volt, 3 Phase.
• All above V/S Drive Kits include NEMA 1 / IP30
Junction Box, Controller and Motor.
• Good for cycle rates of up to 15 cycles per minute, at
1/2 second ramp time, with a maximum speed of 250
FPM.
• Drawing No. DG-001146. |
|
|
|
|
|
OPTIONAL: Mounting and Wiring Add-On . . .
(mounted close to the motor) |
$715.70
|
|
|
|
|
|
|
|
| Brake Relay Kit (EA-068A).............................. |
$575.24
|
|
|
• When AC Variable Speed Controller is used with a
Brake Motor, A Brake Relay Kit (EA-068A) is
required. Add an additional $575.24
for this option.) |
|
|
|
|
|
|
ELECTRONIC CLUTCH BRAKE DRIVE PACKAGE
|
| Part No. |
Description |
Price |
| EA-VSC-01-CB |
2 HP Electronic Clutch-Brake Kit |
$5,361.50
|
|
|
|
|
|
OPTIONAL: Mounting and Wiring Add-on .
(mounted close to the motor) |
$715.70
|
|
|
|
|
|
|
|
KIT INCLUDES
|
|
|
|
| Part No. |
Description |
| VSC-01-20 |
AC Variable Speed Controller, 460 Volt, 3 Phase |
| 032.345 |
2 HP 460 Volt, 3 Phase, C-Face Motor TEBC
(Blower Cooled) With 5AC Reducer and #60 Chain
and Sprockets |
|
|
|
|
|
IMPORTANT NOTES
|
|
• Good for cycle rates of up to 60 cycles per minute.
• 1/10 second Accel and Decel time, with 350 FPM
Maximum Speed.
• 230 or 460 Volt Only, Other Voltages, Contact us.
• Motor Cooling Blower is 115 Volt, 1 Phase, 60 Hz.
• Price Includes 5AC Reducer and #60 Chain and
Sprockets |
| Part No. |
Description |
| VSC-01-17 |
AC Variable Speed Controller, 230 Volt, 3 Phase |
| 032.345 |
2 HP 230 Volt, 3 Phase, C-Face Motor TEBC
(Blower Cooled) With 5AC Reducer and #60 Chain
and Sprockets |
|
|
|
|
|
Click the button of the item you wish to purchase. Contact us for special lengths
| • "Start-Stop" Push-button Station |
|
|
• "Start-Stop"Push-button Station |
033.1955
|
$223.91
|
|
|
|
033.195................................................. |
$151.10
|
| Remote mounted, Nema 1 |
|
|
|
To be mounted in Mag Starter Cover |
|
|
|
|
|
|
|
|
|
|
| • "Fwd-Rev-Stop" Push-button Station |
|
|
• "Fwd-Rev-Stop"Push Button Station |
| 033.1965 |
$420.87
|
|
|
|
033.196.................................................. |
$520.41
|
| Remote mounted, Nema 1 |
|
|
|
To be mounted in Mag Starter Cover |
|
|
|
|
|
|
|
|
|
|
| • "Up-Down-Stop" Push-button Station |
|
|
• Mounting Brackets for photo eye
|
| 033.1975 |
$420.87
|
|
|
Remote mounted, Nema 1
To be mounted in Mag Starter Cover
|
|
|
|
#033.2122
B-05165 ..............................................
|
$125.19
|
|
|
CONVEYOR WEIGHT TABLE
|
SIZE
TO
ORDER
Overall
Length
"A" |
Bed
Length
"L" |
Overall
Length
with
Center
Drive |
Drive
Pulley |
Black Friction Surface Belt Widths
|
| 6" |
8" |
10" |
12" |
14" |
16" |
18" |
20" |
24" |
30" |
|
Between Side Guards
|
| 7" |
9" |
11" |
13" |
15" |
17" |
19" |
21" |
25" |
31" |
|
Overall Bed Widths
|
| 8" |
10" |
12" |
14" |
16" |
18" |
20" |
22" |
26" |
32" |
| 6' |
5' |
6' |
4" Dia.
|
254 |
267 |
277 |
287 |
297 |
320 |
330 |
358 |
381 |
404 |
| 11' |
10' |
11' |
301 |
316 |
330 |
344 |
358 |
398 |
412 |
427 |
452 |
477 |
| 16' |
15' |
16' |
369 |
388 |
407 |
425 |
443 |
501 |
520 |
539 |
573 |
607 |
| 21' |
20' |
21' |
422 |
445 |
468 |
490 |
512 |
535 |
558 |
581 |
627 |
696 |
| 26' |
25' |
26' |
491 |
519 |
546 |
573 |
599 |
627 |
655 |
683 |
739 |
823 |
| 31' |
30' |
31' |
538 |
570 |
601 |
632 |
662 |
694 |
726 |
758 |
822 |
918 |
| 36' |
35' |
36' |
535 |
621 |
656 |
694 |
737 |
773 |
810 |
846 |
919 |
1029 |
| 41' |
40' |
41' |
655 |
695 |
735 |
759 |
813 |
853 |
894 |
935 |
1017 |
1140 |
| 46' |
45' |
46' |
702 |
747 |
760 |
836 |
892 |
932 |
978 |
1023 |
1114 |
1249 |
| 51' |
50' |
51' |
775 |
825 |
874 |
923 |
971 |
1022 |
1072 |
1122 |
1222 |
1372 |
| 56'-4" |
55' |
56' |
8" Dia.
|
822 |
876 |
929 |
985 |
1046 |
1101 |
1156 |
1210 |
1319 |
1481 |
| 61'-4" |
60' |
61' |
892 |
950 |
1008 |
1065 |
1122 |
1181 |
1240 |
1299 |
1417 |
1594 |
| 66'-4" |
65' |
66' |
939 |
1001 |
1063 |
1127 |
1197 |
1260 |
1324 |
1387 |
1514 |
1703 |
| 71'-4" |
70' |
71' |
1013 |
1081 |
1148 |
1215 |
1281 |
1351 |
1419 |
1487 |
1623 |
1827 |
| 76'-4" |
75' |
76' |
1060 |
1132 |
1203 |
1277 |
1356 |
1430 |
1503 |
1575 |
1720 |
1936 |
| 81'-4" |
80' |
81' |
1130 |
1206 |
1282 |
1357 |
1432 |
1521 |
1587 |
1664 |
1818 |
2049 |
| 86'-4" |
85' |
86' |
1146 |
1257 |
1337 |
1419 |
1507 |
1589 |
1671 |
1752 |
1915 |
2158 |
| 91'-4" |
90' |
91' |
1177 |
1331 |
1415 |
1499 |
1582 |
1669 |
1754 |
1839 |
2039 |
2324 |
| 96'-4" |
95' |
96' |
1293 |
1382 |
1470 |
1561 |
1657 |
1748 |
1838 |
1927 |
2136 |
2433 |
| 101'-4" |
100' |
101' |
1363 |
1456 |
1549 |
1641 |
1733 |
1828 |
1922 |
2016 |
2204 |
2486 |
|
| All weights are conveyor weights only. Accessories, crating, etc., are not included. |
|
Belt Conveyors, Conveyor, Conveyor Belt, Low Profile Conveyor, Conveyors, Troughed Bed, and Slider Bed from your source for
material handling equipment.
|
|
