MODEL PSBC PLASTIC BELT CURVE CONVEYOR
|
|
 |
|
|
|
|
The Model PSBC with modular plastic
belting uses a positive drive system to
eliminate belt slippage and mistracking. |
|
• 3 Belt Widths
• Polypropylene 1" Pitch Plastic Belt
• Adjustable MS-Type Floor Supports Available |
|
|
|
|
|
|
|
|
Curve
Angle
|
Belt Width
|
12"
|
18"
|
24"
|
|
Between Rail Width
|
13"
|
19"
|
25"
|
|
Overall Frame Width
|
16"
|
22"
|
28"
|
|
30°
|
Weights
(Lbs.)
|
279
|
317
|
354
|
|
45°
|
366
|
424
|
479
|
|
60°
|
465
|
543
|
616
|
|
90°
|
551
|
649
|
740
|
|
|
|
Belt
Width
|
Bed
Width
|
“B"Actual
Conveying
Surface
|
“C"
|
“D"
|
“R"
|
|
12"
|
16"
|
11"
|
18"
|
16"
|
27"
|
|
18"
|
22"
|
17"
|
27"
|
22"
|
40"
|
|
24"
|
28"
|
23"
|
36"
|
28"
|
53"
|
|
|
|
All weights are conveyor weights only. Accessories, crating,
etc., are not included. |
|
|
|
|
Standard Specifications
|
|
|
|
END DRIVE–Located on discharge end of conveyor.
Chain guard located on left hand side. |
|
RETURN BARS–UHMW on aluminum. |
|
|
|
BEARINGS–Sealed, pre-lubricated, self-aligning ball
bearings on drive and tail shafts. |
|
|
BELT–Polypropylene 1 in. pitch Flush Grid Radius Belt,
nominal 1 in. less than BR. |
|
|
|
|
SPEED REDUCTION–Sealed worm gear C-Face
speed reducer. No. 50 roller chain to drive sprocket. |
|
|
BED–UHMW on aluminum slider bars, mounted to
frame spacers. Mounted in 7 1/2 in. x 12 ga. powder
painted, formed steel channel frame bolted together
with butt couplings. |
|
|
|
|
MOTOR–1/2 HP–208/230/460/575V–3 Ph. 60 Hz.
Totally Enclosed C-Face. |
|
|
|
BELT SPEED–Constant 65 FPM. |
|
|
DRIVE AND TAIL SPROCKETS–20 tooth 6.4 in.
pitch dia. molded plastic sprockets on 1 1/2 in. sq.
shaft, 1 3/16 in. dia. shaft at bearings. |
|
|
|
|
CAPACITY–300 lbs. distributed live load. |
|
|
|
|
|
| SNUB ROLLERS–Located at drive and tail ends. |
|
|
|
|
|
|
Optional Equipment
|
|
|
|
FLOOR SUPPORTS–MS Type floor supports are
available with a wide range of adjustment. Specify top
of belt or roller elevation. One support required at every
bed joint and ends of conveyor. Holes in feet for lagging
to floor. Knee braces recommended above MS-6
support. |
|
V-BELT DRIVE–V-belt supplied between motor and
reducer. Allow 65 in. |
|
|
|
CEILING HANGARS–5/8 in. dia. x 8 ft. long unplated
rods fully threaded. Other lengths and galvanized rods
available. |
|
|
|
MOTORS–Energy efficient, single phase, brakemotor,
other characteristics. 2 HP maximum. |
|
|
BED–Stainless steel in lieu of powder painted HRS
(Excluding Aluminum Support Bars). |
|
|
|
|
ELECTRICAL CONTROLS–Non-reversing magnetic
starters and push-button stations. AC variable frequency
drive. |
|
|
| BELT–Other belts available, contact us. |
|
|
|
BELT SPEED–Other constant and variable speeds.
V-belt drive supplied on speeds under 15 FPM and
with variable speeds. Note: Capacity affected with
speed change. |
|
|
|
Click the button of the item you wish to purchase. Contact us for special lengths
|
| PRICES FOR COMPLETE CONVEYOR INCLUDE: |
|
|
|
• Polypropylene 1 in. pitch flush grid
• 7 1/2 in. x 12 Ga. powder painted, formed steel
channel frame with UHMW on aluminum slider bars
• 6.4" Pitch Dia. x 20 tooth Drive & Tail Sprockets
• "C" Face Speed Reducer–Sealed Worm Gear
• 1/2 HP–"C" Face Totally Enclosed Motor (Specify
Exact Voltage) |
|
• Totally Enclosed Chain Guard
• 65 FPM Belt Speed
• Less Electrical Controls
• Less Supports |
|
|
|
|
Turn
|
Plastic Belt Width
|
|
12"
|
18"
|
24"
|
|
Over All Bed Width
|
|
16"
|
22"
|
28"
|
|
45°
|
|
|
|
|
90°
|
|
|
|
|
180°
|
|
|
|
|
| NOTE: Contact The Sales Dept. for Longer Tangents. |
|
|
| IMPORTANT NOTES |
• FLOOR SUPPORTS
There are two (2) stationary floor supports and one single center leg required.
• OTHER WIDTHS
For widths less than 16" OAW , use 16" OAW price plus 10%
For widths over 28" OAW, contact us for lead time. |
Click the button of the item you wish to purchase. Contact us for special lengths
| MOTORS |
Extra Motor Price for OTHER THAN: 1/2 HP–208/230/460/575 V–3 Ph.–60 Hz.–Totally Enclosed.
Speed affects horsepower requirements. |
|
H.P.
REQ.
|
TOTALLY ENCLOSED
|
ENERGY EFFICIENT
|
BRAKEMOTORS
|
200/208/230/
460/575V
3 Ph.-60 Hz. |
115/230V
1 Ph.-60 Hz. |
230/460V 3 Ph.-60 Hz. |
575V 3 Ph.-60 Hz. |
Holding Brake
208/230/
460/575V
3 Ph.-60Hz. |
Cycling Brake 208/230/
460/575V*
3 Ph.-60Hz. |
Cycling Brake 208/230/
460/575V*
3 Ph.-60Hz. |
Holding Brake
115/230V
1 Ph.-60Hz. |
| 1/2 |
|
|
|
|
N/A
|
N/A
|
N/A
|
N/A
|
| 1 |
N/A
|
|
|
|
|
|
|
|
| 2 |
N/A
|
|
|
|
|
|
|
|
|
|
| *575V - Prices coded in light blue call for lead time. |
* NOTE: "High Cycle Brakemotors" are used for indexing and are rated for 30 cycles per minute. Add-On Prices Include 5AC Reducer,
Heavy Duty Motor Base Plate, and #60 Chain and Sprockets with Taper Bushed Hubs.
** NOTE: "High Cycle Brakemotor" Add-On Prices Include 5AC Reducer, Heavy Duty Motor Base Plate and Timing Belt Drive.
NOTE: SSB and D Series are Holding Brakes and are NOT rated for cycling. |
|
| FLOOR SUPPORTS |
|
|
OPTIONAL DRIVES |
|
|
Not Included in Base Price. Use Chart Below for
Required Elevation. |
|
|
Optional Drives
|
|
Drive Type
|
12"-20"
|
22"-30"
|
32"-42"
|
|
End Drive
(V-Belt)
|
|
|
|
|
Side Mounted
(C-Face)
|
|
|
|
|
Side Mounted
(V-Belt)
|
|
|
|
|
Center
(C-Face)
|
|
|
|
|
Center
(V-Belt)
|
|
|
|
|
Overhead
(C-Face)
|
|
|
|
|
Overhead
(V-Belt)
|
|
|
|
|
|
|
|
MS SUPPORT
|
|
Model No.
|
Adjustment to
Top of Belt
|
Price each
|
|
*MSL-1
|
9 3/4" to 10 3/4"
|
|
|
*MSL-2
|
10 3/4" to 12 1/2"
|
|
|
*MSL-3
|
12 1/2" to 15 1/8"
|
|
|
*MS-1
|
14 3/4" to 16 1/2"
|
|
|
*MS-1.2
|
15 3/4" to 17 1/2"
|
|
|
*MS-1.4
|
16 3/4" to 18 1/2"
|
|
|
*MS-2
|
17 3/4" to 20 3/4"
|
|
|
MS-3
|
20 3/8" to 23 3/8"
|
|
|
MS-4
|
23 3/8" to 29 3/8"
|
|
|
MS-5
|
27 3/8" to 33 3/8"
|
|
|
MS-6
|
31 3/8" to 43 3/8"
|
|
|
MS-7
|
41 3/8" to 53 3/8"
|
|
|
MS-8
|
53 3/8" to 65 3/8"
|
|
|
MS-9
|
65 3/8" to 77 3/8"
|
|
|
MS-10
|
77 3/8" to 89 3/8"
|
|
|
MS-11
|
87 3/8" to 99 3/8"
|
|
|
MS-12
|
99 3/8" to 111 3/8"
|
|
|
|
|
|
|
|
|
|
#50 O-Ring Drive Chain............Add ........ $301.40
|
|
|
|
|
|
|
|
|
|
|
GUARD RAILS* |
|
|
|
|
|
|
|
|
|
Adjustable Universal Channel Guard Rail |
|
|
|
Both Sides .................. per foot ................. $16.00
|
|
|
One Sides .................. per foot .................. $8.20
|
|
|
|
|
|
|
|
|
Angle Type |
|
|
Types "A" or "B" available (specify).
Prices are for both sides. |
|
|
|
|
|
|
|
|
Type "A"
1 1/2" x 1 1/2" x 12 Ga.......... per foot............... $8.20
|
|
|
|
|
|
| *Less than 19 15/16" top of belt elevation - |
|
|
|
|
|
|
|
|
|
|
Type "B" (See NOTE)
1 1/2" x 1 1/2" x 12 Ga.......... per foot............... $11.50
|
|
|
|
Side mounted Drive Required |
|
|
|
|
NOTE: MS-7 to MS-12: Knee Braces included in price |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Extra Knee Braces .......... per pair....................................... $31.80
|
|
|
|
|
|
|
|
|
|
Fixed Channel Type
(Prices are for both sides.) |
|
Single Center Leg (MSC-6 and below) each.................... $64.00
|
|
|
|
Single Center Leg (MSC-7 and above) each.................... $79.70
|
|
|
|
|
|
3 1/2" x 1 1/2" x 12 Ga........... per foot............. $23.90
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
* NOTE: If product comes in contact with guard rails, product
flow will be affected. |
| GUARD RAILS |
|
|
|
|
|
CONSTANT AND VARIABLE SPEEDS |
Adjustable Universal Channel Guard Rail
45º and 90º |
|
|
Constant C-Face–Within 15-70 FPM....No Charge |
|
Constant V-Belt–Minimum of 4 FPM........
.................................Use V-Belt Drive Add-on |
| Both Sides ......................... |
$237.90
|
|
| Outside Only ..................... |
$160.40
|
|
|
|
|
|
| Inside Only ........................ |
$105.70
|
|
DRIVE COMPONENT DEDUCTS |
|
|
|
Less Motor Drive, Motor Mount and Guards, but
with Shaft Extension and Sprocket .......
Deduct ................................................. $694.20 |
| 180º |
|
|
| Both Sides ......................... |
$475.80
|
|
| Outside Only ..................... |
$320.40
|
|
|
Less Motor Only (1/2 HP-208/230/460/575 V-
3 Ph.-60 Hz.) ..... Deduct....................... $258.30 |
| Inside Only ........................ |
$210.80
|
|
|
|
|
Type "A"
1 1/2" x 1 1/2" x 12 Ga.
45º and 90º |
|
|
|
|
Less Reducer*...............Deduct............. $307.40 |
|
|
*Less V-Belt Guard, Chain Guard, sheaves and
sprockets when V-Belt drive is supplied. Less chain
guard and sprockets when C-Face drive is supplied. |
| Both Sides ......................... |
$97.30
|
|
| Outside Only ..................... |
$60.40
|
|
|
|
|
|
|
CENTER BEARING SUPPORT (END DRIVE) |
| Inside Only ........................ |
$35.80
|
|
|
(Drive and Tail) ..............Add On........... $716.70
|
|
|
|
| 180º |
|
|
|
|
|
|
|
| Both Sides ......................... |
$192.60
|
|
|
|
|
| $120.40
|
|
GALVANIZING - Contact us. |
| Outside Only ..................... |
|
| $53.70
|
|
|
|
|
| Inside Only ........................ |
|
|
|
|
|
|
|
|
|
|
Type "B"
1 1/2" x 1 1/2" x 12 Ga.
3 1/2" x 1 1/2" x 12 Ga.
45º and 90º |
|
|
|
|
|
|
|
POLY-TIER SUPPORTS |
|
|
|
|
|
|
|
 |
|
PRICES FOR COMPLETE
CONVEYOR INCLUDE:
• Painted Steel Support Legs
• Adjustable Crosspipe Assembly
• Knee Braces (1 set per level of
conveyor)
• "U" Brackets
• Single Width Conveyor Only |
| Both Sides ......................... |
$145.40
|
|
|
| Outside Only ..................... |
$92.40
|
|
|
| Inside Only ........................ |
$53.70
|
|
|
|
|
|
|
| 180º |
|
|
|
| Both Sides ......................... |
$291.60
|
|
|
|
|
|
|
|
IMPORTANT NOTES. . .
• Check for Clearance.
• Specify type of conveyor to be used.
• Use in place of LS or MS Supports only. |
| Outside Only ..................... |
$184.30
|
|
|
|
|
|
| Inside Only ........................ |
$106.70
|
|
|
|
|
|
|
|
|
Fixed Channel Type
3 1/2" x 1 1/2" x 12 Ga.
45º and 90º |
|
|
|
|
|
|
|
|
|
|
CAPACITY DATA:
1500 lbs. ...........per cross pipe
4500 lbs. Per set of legs |
|
|
|
|
|
|
| Both Sides ......................... |
$232.10
|
|
|
|
|
| Outside Only ..................... |
$146.60
|
|
|
|
|
| Inside Only ........................ |
$87.00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| (2) TIER POLY-TIER SUPPORTS |
|
36"
|
|
|
42"
|
|
|
48"
|
|
|
54"
|
|
|
60"
|
|
|
66"
|
|
|
72"
|
|
|
78"
|
|
|
84"
|
|
|
90"
|
|
|
96"
|
|
|
102"
|
|
|
108"
|
|
|
114"
|
|
|
120"
|
|
|
| 180º |
|
|
|
|
|
|
|
| Both Sides ......................... |
$464.10
|
|
|
| Outside Only ..................... |
$292.50
|
|
|
| Inside Only ........................ |
$173.50
|
|
|
|
|
|
|
|
| CEILING HANGERS |
|
Ceiling Hanger Brackets with (2) 5/8" dia. x
8'-0" long unplated fully threaded rods......... |
|
|
|
|
$156.70
|
|
Ceiling Hanger Brackets with (2) 5/8" dia. x
8'-0" long galvanized fully threaded rods....... |
|
|
|
| $187.20
|
|
Ceiling Hanger Brackets with (2) 5/8" dia.
x 10’-0" long unplated fully threaded rods..... |
|
|
|
| $231.60
|
|
Ceiling Hanger Brackets with (2) 5/8" dia.
x 10’-0" long galvanized fully threaded rods.... |
|
|
|
| $381.20
|
|
Ceiling Hanger Brackets with (2) 5/8" dia.
x 12’-0" long unplated fully threaded rods..... |
|
|
|
|
$384.40
|
|
Ceiling Hanger Brackets with (2) 5/8" dia.
x 12’-0" long galvanized fully threaded rods.... |
|
|
|
|
|
|
|
|
| $444.50
|
|
|
|
|
|
| (3) TIER POLY-TIER SUPPORTS |
|
36"
|
|
|
42"
|
|
|
48"
|
|
|
54"
|
|
|
60"
|
|
|
66"
|
|
|
72"
|
|
|
78"
|
|
|
84"
|
|
|
90"
|
|
|
96"
|
|
|
102"
|
|
|
108"
|
|
|
114"
|
|
|
120"
|
|
|
| Ceiling Hanger Brackets, Less Rods Only.... |
$98.70
|
|
|
|
|
|
|
|
|
| Extra Length Rods: |
|
|
|
|
(2) 8’-0" long x 5/8" dia. unplated fully
threaded rods ............................................ |
|
|
|
|
| $57.40
|
|
|
(2) 8’-0" long x 5/8" dia. galvanized fully
threaded rods ............................................. |
|
|
|
|
| $88.40
|
|
|
(2) 10’-0" long x 5/8" dia. unplated fully
threaded rods .............................................. |
|
|
|
|
| $132.70
|
|
|
(2) 10’-0" long x 5/8" dia. Galvanized fully
threaded rods .............................................. |
|
|
|
|
| $282.30
|
|
|
(2) 12’-0" long x 5/8" dia. unplated fully
threaded rods .............................................. |
|
|
|
|
| $285.80
|
|
|
(2) 12’-0" long x 5/8" dia. Galvanized fully
threaded rods .............................................. |
|
|
|
|
| $346.00
|
|
|
| Hex Coupling Nuts for Rods ................... |
$5.20
|
|
|
|
|
|
|
|
|
Click the button of the item you wish to purchase. Contact us for special lengths
| ELECTRICAL CONTROLS AND DRIVE SECTION |
|
|
|
|
MANUAL START SWITCH or
SAFETY DISCONNECT
|
|
 |
|
|
|
LIMIT SWITCH, SINGLE POLE,
WITH NYLON ROLLER LEVER |
 |
|
|
|
|
| #032.1014......................................... |
$225.79
|
|
|
|
|
#033.2032 & #033.2072..................$589.01
Nema 4 |
"START-STOP", Nema 1, One direction, 30
AMP, 3 Pole (Single or 3 phase) |
|
|
|
|
|
|
|
|
LIMIT SWITCH, DOUBLE POLE,
WITH NYLON ROLLER LEVER |
|
 |
|
|
|
|
|
|
|
|
|
#033.2033& #033.2072...................$352.04
Nema 4 |
|
REVERSING DRUM SWITCH |
|
|
|
|
|
|
#032.103.......................................... |
$905.51
|
|
|
|
 |
|
|
|
|
|
|
|
|
"Fwd-Stop-Rev", Nema 1, for 1-1/2 HP at
115 volts or 2 HP at 230 volts single phase,
or 2 HP max. three phase |
|
|
|
|
|
 |
PROXIMITY SWITCH, INDUCTIVE,
(METAL SENSING) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
#032.210.........................................$217.67
115 Volt AC, two wire with ground, 30mm dia.,
10mm range
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
FOOT SWITCH WITH GUARD |
|
|
|
|
|
|
|
|
|
|
#032.211.........................................$257.68
24 Volt DC, two wire with ground, 30mm dia.,
10mm range |
|
#032.200........................................... $286.50
(Constant Pressure) "On-Off" type, Nema 1,
Pilot Control or 1 HP max. single phase. |
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
PHOTO EYE, ON-OFF TYPE |
 |
|
|
|
|
|
|
|
#EA-000005......................................$1,122.83
Banner Q45 Retro Reflective Photo Eye Kit
with timing module, reflector and mounting
brackets. Photo Eye output is one form C
type relay, Operating voltage
24-250VAC/12-250VDC |
|
POWER CORD AND PLUG (20') |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
POWER CORD WITH PLUG ONLY 20' LONG
|
|
Model No.
|
Voltage
|
HP Rating
|
Prices
|
|
EA-039-1A
|
115/1
|
1/2-3/4
|
|
|
EA-039-2A
|
115/1
|
1
|
|
|
EA-039-3A
|
115/1
|
1 1/2
|
|
|
EA-039-4A
|
230/1
|
1/2-1
|
|
|
EA-039-5A
|
230/1
|
1 1/2-2
|
|
|
EA-039-6A
|
208-230/3
|
1/2-2
|
|
|
EA-039-7A
|
460/3
|
1/2-2
|
|
|
|
|
POWER CORD WITH PLUG 20' LONG WITH MANUAL START SWITCH AND MOUNTING BRACKET
|
|
Model No.
|
Voltage
|
HP Rating
|
Prices
|
|
EA-039-1B
|
115/1
|
1/2-3/4
|
|
|
EA-039-2B
|
115/1
|
1
|
|
|
EA-039-3B
|
115/1
|
1 1/2
|
|
|
EA-039-4B
|
230/1
|
1/2-1
|
|
|
EA-039-5B
|
230/1
|
1 1/2-2
|
|
|
EA-039-6B
|
208-230/3
|
1/2-2
|
|
|
EA-039-7B
|
460/3
|
1/2-2
|
|
|
|
|
|
|
|
|
|
|
|
|
MOUNTING BRACKETS FOR PHOTO
EYE #033.2122 |
|
|
|
|
B-05165...........................................$125.19
|
|
|
|
|
|
|
|
|
|
|
|
 |
AIR PRESSURE SWITCH |
|
#094.191........................................$732.79
Nema 4 |
|
|
|
|
|
|
|
|
|
|
EMERG. STOP PULL CORD SWITCH |
|
|
|
|
|
#032.285 with 032.2851 Turnbuckle
...........................................................$737.85
Nema 4 |
|
|
|
|
|
"RED" EMERGENCY PULL CORD
CABLE AND MOUNTING HARDWARE |
|
|
|
|
|
#032.281...one side.................$7.88
per / ft.
both sides..............$16.83
per / ft. |
|
|
|
|
|
EMERGENCY PUSH BUTTON |
|
|
|
|
|
#032.284..........................................$296.39
Nema 4 |
|
|
|
|
|
|
|
|
PHOTO EYE, 18MM DIA., DIFFUSED,
(PHOTO PROX.) 115 VOLT, LIGHT
OPERATE, 2-METER CABLE |
|
|
|
|
|
#032.2113 (100mm range, 3.94")....$1,130.24
#032.2116 (200mm range, 7.87")....$205.79
#033.218 (400mm range, 15.74")....$311.09
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
NOTE: PRICING LISTED NOT MOUNTED
OR WIRED |
|
|
|
|
"PHOTO EYE, RETRO-REFLECTIVE,
(POLARIZED) 24 VOLT DC |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
#033.2128 with 032.21122 Cable.....$253.44
#032.21122 (Cable Only)...................$76.71
|
Click the button of the item you wish to purchase. Contact us for special lengths
|
CONTROLLER PRICES
|
|
|
|
|
AC VARIABLE SPEED CONTROLLER ONLY
|
|
SINGLE PHASE CONTROLLER INPUT
|
| Motor Size |
115 Volt |
208/230 Volt |
| 1/2 |
VSC-12-10 |
VSC-12-12 |
| Price |
$1,581.35
|
$1,260.73
|
| 1 |
VSC-12-11 |
VSC-12-13 |
| Price |
$1,827.73
|
|
| 2 |
N/A |
VSC-12-14
|
| Price |
~ |
|
|
THREE PHASE CONTROLLER INPUT
|
| Motor Size |
208/230 Volt |
460 Volt |
575 Volt |
| 1/2 |
VSC-01-15
|
VSC-01-18
|
VSC-12-29
|
| Price |
|
|
|
| 1 |
VSC-01-16
|
VSC-01-19
|
VSC-12-29
|
| Price |
|
|
|
| 2 |
VSC-01-17
|
VSC01--20
|
VSC-12-30
|
| Price |
|
|
|
|
|
REPLACEMENT INVERTER DUTY
ENERGY EFFICIENT MOTORS
|
|
| HP |
Part No. |
Price |
| 1/2 |
032.351 230/460 |
|
| 1 |
032.353 230/460 |
|
| 2 |
032.355 230/460 |
|
| 1/2 |
032.3512 575 |
|
| 1 |
032.3532 575 |
|
| 2 |
032.3552 575 |
|
|
|
|
|
|
|
IMPORTANT NOTES...
|
|
|
• All above motors are 230 / 460 / 575 Volt, 3 Phase.
• All above V/S Drive Kits include NEMA 1 / IP30
Junction Box, Controller and Motor.
• Good for cycle rates of up to 15 cycles per minute, at
1/2 second ramp time, with a maximum speed of 250
FPM.
• Drawing No. DG-001146. |
|
|
|
|
|
OPTIONAL: Mounting and Wiring Add-On . . .
(mounted close to the motor) |
$715.70
|
|
|
|
|
|
|
|
| Brake Relay Kit (EA-068A).............................. |
$575.24
|
|
|
• When AC Variable Speed Controller is used with a
Brake Motor, A Brake Relay Kit (EA-068A) is
required. Add an additional $575.24
for this option.) |
|
|
|
|
|
|
ELECTRONIC CLUTCH BRAKE DRIVE PACKAGE
|
| Part No. |
Description |
Price |
| EA-VSC-01-CB |
2 HP Electronic Clutch-Brake Kit |
$5,361.50
|
|
|
|
|
|
OPTIONAL: Mounting and Wiring Add-on .
(mounted close to the motor) |
$715.70
|
|
|
|
|
|
|
|
KIT INCLUDES
|
|
|
|
| Part No. |
Description |
| VSC-01-20 |
AC Variable Speed Controller, 460 Volt, 3 Phase |
| 032.345 |
2 HP 460 Volt, 3 Phase, C-Face Motor TEBC
(Blower Cooled) With 5AC Reducer and #60 Chain
and Sprockets |
|
|
|
|
|
IMPORTANT NOTES
|
|
• Good for cycle rates of up to 60 cycles per minute.
• 1/10 second Accel and Decel time, with 350 FPM
Maximum Speed.
• 230 or 460 Volt Only, Other Voltages, Contact us.
• Motor Cooling Blower is 115 Volt, 1 Phase, 60 Hz.
• Price Includes 5AC Reducer and #60 Chain and
Sprockets |
| Part No. |
Description |
| VSC-01-17 |
AC Variable Speed Controller, 230 Volt, 3 Phase |
| 032.345 |
2 HP 230 Volt, 3 Phase, C-Face Motor TEBC
(Blower Cooled) With 5AC Reducer and #60 Chain
and Sprockets |
|
|
|
|
|
Click the button of the item you wish to purchase. Contact us for special lengths
|
| • "Start-Stop" Push-button Station |
|
|
• "Start-Stop"Push-button Station |
| 033.1955 |
$223.91
|
|
|
|
033.195................................................. |
$151.10
|
| Remote mounted, Nema 1 |
|
|
|
To be mounted in Mag Starter Cover |
|
|
|
|
|
|
|
|
|
|
| • "Fwd-Rev-Stop" Push-button Station |
|
|
• "Fwd-Rev-Stop"Push Button Station |
| 033.1965 |
$420.87
|
|
|
|
033.196.................................................. |
$520.41
|
| Remote mounted, Nema 1 |
|
|
|
To be mounted in Mag Starter Cover |
|
|
|
|
|
|
|
|
|
|
| • "Up-Down-Stop" Push-button Station |
|
|
033.1975
Remote mounted, Nema 1 |
$420.87
|
|
|
|
|
• Mounting Brackets for photo eye |
| To be mounted in Mag Starter Cover |
|
|
|
|
|
#033.2122
B-05165 .............................................. |
$125.19
|
|
Belt Conveyors, Conveyor, Conveyor Belt, Low Profile Conveyor, Conveyors, and Slider Bed from your source for material handling
equipment.
|
|
