MODEL RB
|
|
HORIZONTAL BELT CONVEYOR
(ROLLER BED)
|
 |
|
|
|
The Model RB is designed to move
heavier loads. Roller bed design
reduces belt friction and provides
greater capacity. Applications include:
assembly, inspection and packing
operations. |
|
|
|
• 15 Belt Widths
• Reversible
• Moves Heavier Loads
• Center Drive
• System Ends
• Pop-Out Roller
• Adjustable MS-Type Floor
Supports Available |
|
|
|
 |
|
 |
|
|
|
STANDARD SPECIFICATIONS
|
|
|
|
| BELT - Ultimate 140 BBS-Nitrile. |
|
RETURN IDLER - Adjustable 1.9 in. dia. pre-
lubricated ball bearings. |
|
|
BED - Roller bed with 1.9 in. dia. roller x 16 ga.
galvanized tube spaced every 6 in. Mounted in 6-1/2 in.
x 12 ga. powder painted formed steel channel frame
bolted together with splice plates. |
|
|
|
|
TAKE-UP - Take-ups in center drive provides 16 in.
of belt take-up. |
|
|
|
BEARINGS - Sealed, pre-lubricated, self-aligning,
ball bearings on drive and tail pulleys. Pre-lubricated
ball bearings in tread rollers. |
|
|
CROSS BRACING - Rods with turnbuckles are
fastened to underside of bed to provide proper
alignment of bed rollers and insure correct product
tracking. Supplied on every other section, 30 ft. bed
lengths and over. |
|
|
|
|
SPEED REDUCTION - Sealed worm gear C-Face
speed reducer. No. 50 roller chain to drive pulley. |
|
|
|
MOTOR - 1/2 hp-208/230/460/575V-3 Ph.-60 Hz.
Totally Enclosed C-Face. |
|
|
CENTER DRIVE - Minimum elevation - 17-3/4 in.
Can be placed on any section of conveyor length.
Minimum OAL without modification 120 in. Chain
guard located on left hand side. |
|
|
|
|
BELT SPEED - Constant 65 FPM. |
|
|
|
CAPACITY - Maximum load per linear foot of
conveyor 225 lbs. NOT TO EXCEED capacity in
chart. |
|
|
DRIVE PULLEY - 8 in. dia. with 1-7/16 in. dia.
shaft at bearings, machine crowned and fully lagged. |
|
|
|
|
FLOOR SUPPORTS - Now supplied as optional
equipment. |
|
|
TAIL PULLEY - 4 in. dia. with 1 in. dia. shaft at
bearings or 6 in. dia. with 1-3/16 in. dia. shaft at
bearings, machine crowned. See chart below. |
|
|
|
|
|
|
SNUB IDLER - Adjustable 2-1/8 in. dia. pre-
lubricated ball bearings. Guards included. |
|
|
|
|
|
| 8" DIA. DRIVE PULLEY HORIZONTAL LIVE LOAD CAPACITY @65 FPM |
| HP |
BELT WIDTHS TO |
LENGTHS UP TO |
| 52' |
102' |
| DISTRIBUTED LOAD (LBS.) |
1/2 |
14" |
2490 |
2150 |
| 24" |
2280 |
1800 |
| 36" |
1860 |
1170 |
| 48" |
1520 |
620 |
| 54" |
1300 |
350 |
1 |
14" |
5500 |
5160 |
| 24" |
5290 |
4810 |
| 36" |
4870 |
4180 |
| 48" |
4530 |
3630 |
| 54" |
4000 |
3200 |
2 |
14" |
11520 |
11170 |
| 24" |
11320 |
10830 |
| 36" |
10890 |
10200 |
| 48" |
10550 |
9650 |
| 54" |
10000 |
9200 |
|
|
|
|
|
|
OPTIONAL EQUIPMENT
|
|
|
|
* BELT - White Polymate 100 RMP-COS
(cover one side), Black Trackmate 533 COS
PVC, Tan Glidetop. |
|
* ROLLER CENTERS - Tread rollers spaced on
3 in., 9 in., or 12 in. centers. |
|
|
|
PULLEYS - 6 in. dia. tail with 1-3/16 in. dia. shaft at
bearings in place of 4 in. when not furnished as standard. |
|
|
* BELT SPEED - Other constant and variable speeds.
V-belt drive supplied on speeds under 17 FPM. |
|
|
|
|
FLOOR SUPPORTS–MS Type floor supports are
available with a wide range of adjustment. Specify top
of belt or roller elevation. One support required at
every bed joint and ends of conveyor. Holes in feet
for lagging to floor. Knee braces recommended above
MS-6 support. |
|
|
END DRIVE - 8 in. end drive mounted on end of unit.
Requires underside take-up. |
|
|
|
LOW ELEVATION SIDE MOUNTED CENTER
DRIVE - Motor reducer unit mounted to side of
conveyor. Minimum 16 in. |
|
|
|
|
|
|
V-BELT DRIVE - V-Belt supplied between motor
and reducer. Allow 65 in. |
|
|
|
POLY-TIER SUPPORTS - 36 in. to 120 in. support
heights in 6 in. increments. Knee braces supplied. |
|
|
O-RING DRIVE CHAIN-With sealed in lubricant
(Recommended for applications that do not permit
regular lubrication). |
|
|
|
CEILING HANGERS - 5/8 in. dia. x 8 ft. long
unplated rods fully threaded. Other lengths and
galvanized rods available. |
|
|
UNDERSIDE TAKE-UP - Provides 16 in. of belt
take-up. Extends down 15-7/8 in. from top of belt. |
|
|
|
|
MOTORS - Energy efficient, single phase, brake
motors, other characteristics. 2 HP maximum. |
|
|
GUARD RAILS–Adjustable Universal Channel Guard
Rail, fixed channel, type A & B angle. Fixed Channel
overlapping, one direction. Fixed Channel nonover-
lapping, reversing. See Accessory section below. |
|
|
|
|
ELECTRICAL CONTROLS - Non-reversing or
reversible magnetic starter, and push-button stations.
AC variable frequency drive. |
|
|
|
* NOTE: Capacity affected with these options. |
|
|
|
|
|
Click the button of the item you wish to purchase. Contact us for special lengths
|
SIZE TO
ORDER
Overall
Length
"A" 4" Dia.
Pulley |
BED
LENGTH
"L" |
Belt Widths |
SIZE TO
ORDER
Overall
Length
"A" 6" Dia.
Pulley |
Belt Widths |
| 12" |
18" |
24"
|
30"
|
36"
|
| Between Rail Widths |
Between Rail Widths |
| 15" |
21" |
27'
|
33"
|
39"
|
| Overall Frame Widths |
Overall Frame Widths |
| 18" |
24" |
30"
|
36"
|
42"
|
| 12' |
10' |
|
|
12'
|
|
|
|
| 17' |
15' |
|
|
17'
|
|
|
|
| 22' |
20' |
|
|
22'
|
|
|
|
| 27' |
25' |
|
|
27'
|
|
|
|
| 32' |
30' |
|
|
32'
|
|
|
|
| 37' |
35' |
|
|
37'
|
|
|
|
| 42' |
40' |
|
|
42'
|
|
|
|
| 47' |
45' |
|
|
47'
|
|
|
|
| 52' |
50' |
|
|
52'
|
|
|
|
| 57' |
55' |
|
|
57'
|
|
|
|
| 62' |
60' |
|
|
62'
|
|
|
|
| 67' |
65' |
|
|
67'
|
|
|
|
| 72' |
70' |
|
|
72'
|
|
|
|
| 77' |
75' |
|
|
77'
|
|
|
|
| 82' |
80' |
|
|
82'
|
|
|
|
| 87' |
85' |
|
|
87'
|
|
|
|
| 92' |
90' |
|
|
92'
|
|
|
|
| 97' |
95' |
|
|
97'
|
|
|
|
| 102' |
100' |
|
|
102'
|
|
|
|
| Price Per Foot |
|
|
Price Per Foot
|
|
|
|
|
|
|
|
|
| IMPORTANT NOTES |
| • OTHER LENGTHS |
• NON-STANDARD WIDTHS |
|
Other lengths not listed in price chart are available.
For lengths longer than 102', use per foot price as an
add-on. For lengths shorter than 12', user per foot price
as a deduct. (Belt tracking issues may occur on lengths
shorter than 12'). |
|
Contact us for lead time. |
| • INTERMEDIATE BEDS |
|
Use per foot price of width x required length, supports
not included. |
| • FLOOR SUPPORTS |
| • OTHER WIDTHS |
|
Floor Supports are not included in base price. There
are two (2) stationary floor supports required for the
first bed section and one (1) support required per bed
section thereafter. |
|
For "IN-BETWEEN WIDTHS", use next width plus
10%. For widths over 60" OAW, contact us. |
Click the button of the item you wish to purchase. Contact us for special lengths
|
| PRICES FOR OPTIONAL EQUIPMENT |
|
| OPTIONAL BELTS |
|
Extra Price PER FOOT Conveyor Length "A" (in addition to Black Ultimate 140 BBS Belt regularly furnished).
See chart. |
|
| Belt Description |
|
BELT
WIDTH
|
Prices Per Foot of Conveyor Length "A"
|
Prices Per Foot of Conveyor Length "A" |
Trackmate
533 COS-PVC
(Black) |
Polymate
100 RMP-COS
(White) |
Trackmate
120 Roughtop
with PVC Cover
(Black) |
Tan
Glidetop |
High Grip
Longitudinally
Grooved Belt |
| 10" |
|
|
|
|
|
| 12" |
|
|
|
|
|
| 14" |
|
|
|
|
|
| 16" |
|
|
|
|
|
| 18" |
|
|
|
|
|
| 20" |
|
|
|
|
|
| 22" |
|
|
|
|
|
| 24" |
|
|
|
|
|
| 28" |
|
|
|
|
|
| 30" |
|
|
|
|
|
| 34" |
|
|
|
|
|
| 36" |
|
|
|
|
|
| 42" |
|
|
|
|
|
| 48" |
|
|
|
|
|
| 54" |
$8.24
|
$50.48
|
$40.71
|
$234.03
|
$40.71
|
|
Click the button of the item you wish to purchase. Contact us for special lengths
| MOTORS |
Extra motor price for OTHER THAN: 1/2 HP-208/230/460/575V-3 Ph.-60 Hz.-Totally Enclosed. Speed affects
horsepower requirements. |
*Note: "High Cycle Brakemotors" are used for indexing and are rated for 30 cycles per minute. Add-On Prices
Include 5AC Reducer, Heavy Duty Motor Base Plate, and #60 Chain and Sprockets with Taper Bushed Hubs. |
**Note: "High Cycle Brakemotor" Add-On Prices Include 5AC Reducer, Heavy Duty Motor Base Plate and
Timing Belt Drive. |
| Note: SSB and D Series are Holding Brakes and are NOT rated for cycling. |
|
H.P.
REQ.
|
TOTALLY ENCLOSED
|
ENERGY EFFICIENT
|
BRAKEMOTORS
|
200/208/230/
460/575V
3 Ph.-60 Hz. |
115/230V
1 Ph.-60 Hz. |
230/460V
3 Ph.-60 Hz. |
575V 3 Ph.-60 Hz. |
Holding Brake
208/230/
460/575V
3 Ph.-60Hz. |
Cycling Brake 208/230/
460/575V*
3 Ph.-60Hz. |
Cycling Brake 208/230/
460/575V*
3 Ph.-60Hz. |
Holding Brake
115/230V
1 Ph.-60Hz. |
| 1/2 |
N/C |
|
|
|
N/A
|
N/A
|
N/A
|
N/A
|
| 1 |
N/A |
|
|
|
|
|
|
|
| 2 |
N/A |
|
|
|
|
|
|
|
|
| *575V - Prices coded in light blue call for lead time. |
|
|
|
|
|
|
|
|
|
|
|
|
| FLOOR SUPPORTS |
|
|
|
|
|
|
|
|
CEILING HANGERS |
|
Not Included in Base Price. Use Chart Below for
Required Elevation. |
|
|
|
|
|
|
|
|
|
|
 |
|
|
|
|
|
|
|
|
|
|
|
|
|
"MS" SUPPORT
|
|
|
|
|
|
|
|
| Model No. |
Adjustment to Top of Belt |
Price Each |
| *MS-1 |
13-7/8" to 15-7/8" |
|
| *MS-1.2 |
14-7/8" to 16-5/8" |
|
| *MS-1.4 |
15-7/8" to 17-5/8" |
|
| *MS-2 |
16-7/8" to 19-7/8" |
|
| MS-3 |
19-1/2" to 22-1/2" |
|
| MS-4 |
22-1/2" to 28-1/2" |
|
| MS-5 |
26-1/2" to 32-1/2" |
|
| MS-6 |
30-1/2" to 42-1/2" |
|
| MS-7 |
40-1/2" to 52-1/2" |
|
| MS-8 |
52-1/2" to 54-1/2" |
|
| MS-9 |
54-1/2" to 76-1/2" |
|
| MS-10 |
76-1/2" to 88-1/2" |
|
| MS-11 |
86-1/2" to 98-1/2" |
|
| MS-12 |
98-1/2" to 110-1/2" |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Ceiling Hanger Brackets with (2) 5/8" dia.
x 8’-0" long unplated fully threaded rods......
|
|
|
|
|
|
$156.70
|
|
|
|
|
Ceiling Hanger Brackets with (2) 5/8" dia.
x 8’-0" long galvanized fully threaded rods.... |
|
|
|
|
|
$187.20
|
|
|
|
|
Ceiling Hanger Brackets with (2) 5/8" dia.
x 10’-0" long unplated fully threaded rods..... |
|
|
|
|
|
$231.60
|
|
|
|
|
Ceiling Hanger Brackets with (2) 5/8" dia.
x 10’-0" long galvanized fully threaded rods.... |
|
|
|
|
|
$381.20
|
|
|
|
|
Ceiling Hanger Brackets with (2) 5/8" dia.
x 12’-0" long unplated fully threaded rods..... |
|
|
|
|
|
$384.40
|
|
|
|
|
Ceiling Hanger Brackets with (2) 5/8" dia.
x 12’-0" long galvanized fully threaded rods.... |
|
|
|
|
|
$444.50
|
|
|
|
|
Ceiling Hanger Brackets, Less Rods Only.... |
$98.70
|
|
|
|
|
Extra Length Rods: |
|
|
|
|
|
(2) 8’-0" long x 5/8" dia. unplated fully
threaded rods ............................................ |
|
|
|
|
|
$57.40
|
|
|
|
|
|
|
|
*Knee Braces ...................... Per pair ......... |
$31.80
|
|
|
|
|
|
|
|
(2) 8’-0" long x 5/8" dia. galvanized fully
threaded rods ............................................. |
|
|
*Less than 17 3/4" top of belt elevation-Side Mounted Center
Drive Required (With 8" dia. Drive Pulley).
Note: MS-7 to MS-12: Knee Braces included in price. |
|
|
|
|
|
|
$88.40
|
|
|
|
(2) 10’-0" long x 5/8" dia. unplated fully
threaded rods .............................................. |
|
|
|
|
$132.70
|
|
|
|
|
|
|
|
|
|
|
|
|
(2) 10’-0" long x 5/8" dia. galvanized fully
threaded rods .............................................. |
|
|
|
|
|
|
|
$282.30
|
|
|
|
|
|
|
|
(2) 12’-0" long x 5/8" dia. unplated fully
threaded rods .............................................. |
|
|
|
|
|
|
|
|
$285.80
|
|
|
|
|
|
|
(2) 12’-0" long x 5/8" dia. galvanized fully
threaded rods .............................................. |
|
|
|
|
|
|
|
$346.00
|
|
|
|
|
|
|
Hex Coupling Nuts for Rods ................... |
$5.20
|
|
|
|
|
|
|
|
|
|
|
|
| POLY-TIER SUPPORTS |
 |
|
PRICES FOR COMPLETE
SUPPORT INCLUDE:
|
|
|
|
IMPORTANT NOTES
• Check for Clearance
• Specify type of conveyor to be used.
• Use in place of LS or MS Supports only. |
|
• Painted Steel Support Legs
• Adjustable Cross pipe Assembly
• Knee Braces (1 set per level of
conveyor)
• "U" Brackets
• Single Width Conveyor Only |
|
|
|
|
|
|
|
|
|
|
|
|
CAPACITY DATA:
1500 lbs..............................................per cross pipe
4500 lbs..............................................per set of legs |
|
|
|
|
|
|
|
|
|
|
|
|
| (2) TIER POLY-TIER SUPPORTS |
|
36"
|
|
|
42"
|
|
|
48"
|
|
|
54"
|
|
|
60"
|
|
|
66"
|
|
|
72"
|
|
|
78"
|
|
|
84"
|
|
|
90"
|
|
|
96"
|
|
|
102"
|
|
|
108"
|
|
|
114"
|
|
|
120"
|
|
|
|
| (3) TIER POLY-TIER SUPPORTS |
|
36"
|
|
|
42"
|
|
|
48"
|
|
|
54"
|
|
|
60"
|
|
|
66"
|
|
|
72"
|
|
|
78"
|
|
|
84"
|
|
|
90"
|
|
|
96"
|
|
|
102"
|
|
|
108"
|
|
|
114"
|
|
|
120"
|
|
|
|
|
|
Click the button of the item you wish to purchase. Contact us for special lengths
|
| CASTERS |
|
|
LARGER TAIL PULLEY |
| Are available in either Rigid or Swivel type—Specify. |
|
|
6" dia.Tail Pulley in place of 4" dia. when
not furnished as standard............................. |
|
|
|
|
4" Dia. |
6" Dia. |
| CASTERS |
Steel |
Rubber |
Steel |
Rubber |
| Extra Per Support* |
|
|
|
|
|
|
|
$381.70
|
|
|
|
|
|
|
|
|
|
CONSTANT AND VARIABLE SPEEDS |
|
|
|
Constant C-Face--Within 17-135 FPM... |
No Charge |
|
* Price Includes Knee Braces
NOTE: Casters for HS Supports, contact us. |
|
|
Constant V-Belt--Minimum of 4 FPM.............. |
|
|
|
...........................................Use V-Belt Drive Add-On |
|
|
|
|
|
|
|
|
Constant Speeds Below Those Listed Above...........
............................................................Contact us. |
|
Brakes for Casters (Add-On Per Support)*:
4" Dia. Caster ...............................................$41.50
6" Dia. Caster ...............................................$132.70
|
|
|
|
|
|
Variable Speed...See AC Variable Speed Drives
Section below |
|
*Available on swivel casters only. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
DRIVE COMPONENT DEDUCTS |
| UNDERSIDE TAKE-UP |
|
|
|
|
Less Motor Drive, Motor Mount and Guards, |
| Provides 16" of Belt Take-Up on Long Units. |
|
|
|
|
|
|
|
|
but with Shaft Extension...Deduct................ |
$777.20 |
|
| Bed Widths |
Price |
| 16" to 28" |
|
| 30" to 42" |
|
| 48" |
|
| 56" to 60" |
|
|
|
|
|
|
|
Less Motor Only (1/2 HP-208/230/460/575V- |
|
|
|
3Ph.-60 Hz.).............Deduct.................... |
$258.30 |
|
|
|
*Less Reducer......Deduct........................ |
$307.40 |
|
|
|
*Less V-Belt Guard, Chain Guard, sheaves and
sprockets when V-Belt drive is supplied. Less chain
guard and sprockets when C-Face drive is supplied. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Required on units over 100'. Contact us with application. |
|
|
|
|
|
|
|
ELECTRICAL CONTROLS |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
(See bottom of page) |
| GALVANIZING |
|
|
|
|
|
| Contact us |
|
|
|
GUARD RAILS |
|
|
|
|
|
|
|
|
NOTE: Available in 5’ and 10’ lengths only.
Contact us for other lengths. |
| BAG FLATTENER |
|
|
|
| Mounting Assembly Only |
|
|
|
|
|
|
Adjusted Universal Channel Guard Rail |
| 16 in.-28 in. OAW .................................... |
$2,672.53
|
|
|
|
|
|
|
Both Sides............................per foot......... |
$16.00
|
| 30 in.-42 in. OAW .................................... |
$3,791.50
|
|
|
|
|
|
|
One Sides.............................per foot......... |
$8.20
|
| Above 42 in. OAW ....................... |
Contact us |
|
|
|
|
|
|
Angle Type |
NOTE: Roller Bed Only. Upper and lower bed
sections priced separately. Top unit: 5' bed RB
with 4" dia. drive and tail pulley with round ends.
(Price as standard RB.) Lower unit: 10' bed RB. |
|
|
|
|
|
|
Type "A" or "B" available (Specify).
Prices are for Both Sides. |
|
|
|
Type "A"
1-1/2" x 1-1/2" x 12 Ga.........per foot........ |
|
|
|
|
$8.20
|
|
|
|
|
|
|
|
|
| OPTIONAL DRIVES |
|
|
|
|
|
|
|
Type "B"
1-1/2" x 1-1/2" x 12 Ga........per foot......... |
|
| Unified Drives: (Shaft Mounted) |
|
|
|
|
|
|
|
$11.50
|
|
|
|
|
|
|
|
|
| Unified Drives: |
OVERALL FRAME WIDTH |
16"
to 28" |
30"
to 42" |
48" |
54"
to 58" |
Center Drive 8"
Drive Pulley with
075 Reducer |
|
|
|
|
Center Drive 8"
Drive Pulley with
090 Reducer |
|
|
|
|
|
|
|
|
Fixed Channel Type
Prices are for Both Sides.
3-1/2" x 1-1/2" x 12 Ga........per foot......... |
|
|
|
|
$23.90
|
|
|
|
6-1/2" x 1-1/2" x 12 Ga........per foot......... |
$28.70
|
|
|
|
10-1/2" x 1-1/2" x 12 Ga......per foot......... |
$40.60
|
|
|
|
13-1/2" x 1-1/2" x 12 Ga......per foot......... |
$48.80
|
|
|
|
|
|
|
| 8" Drive Pulley |
|
|
|
|
|
|
|
Speed FPM
|
65
|
78
|
97
|
130
|
156
|
195
|
260
|
389
|
|
Max HP
|
1
|
1.2*
|
1
|
2
|
2
|
2
|
2
|
2**
|
|
|
|
|
|
|
|
* Reducer size increases with 2 HP.
**Contact us. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
OPTIONAL DRIVES
|
| Drive Type |
OVERALL FRAME WIDTH
|
|
18" to 24"
|
30" to 42"
|
| Center Drive (V-Belt) |
|
|
| Low Elevation Side Mounted Center (C-Face) |
|
|
| Low Elevation Side Mounted Center (V-Belt) |
|
|
| Center Drive with Extended Take-Up C-Face |
|
|
| Center Drive with Extended Take-Up V-Belt |
|
|
| High Performance Center Drive (C-Face) |
|
|
| Heavy Duty Center Drive (C-Face) |
|
|
| End Drive With Underside Takeup (C-Face) |
N/C
|
N/C
|
| End Drive With Underside Takeup (V-Belt) |
|
|
| Side Mounted End C-Face With Underside Take-Up |
|
|
| Side Mounted End V-Belt With Underside Take-Up |
|
|
|
#50 O-Ring Drive Chain............................Add...........................$301.40
#60 O-Ring Drive Chain............................Add...........................$430.40
|
Click the button of the item you wish to purchase. Contact us for special lengths
| ELECTRICAL CONTROLS AND DRIVE SECTION |
|
|
|
|
MANUAL START SWITCH or
SAFETY DISCONNECT
|
|
 |
|
|
|
LIMIT SWITCH, SINGLE POLE,
WITH NYLON ROLLER LEVER |
 |
|
|
|
|
| #032.1014......................................... |
$225.79
|
|
|
|
|
#033.2032 & #033.2072..................$589.01
Nema 4 |
"START-STOP", Nema 1, One direction, 30
AMP, 3 Pole (Single or 3 phase) |
|
|
|
|
|
|
|
|
LIMIT SWITCH, DOUBLE POLE,
WITH NYLON ROLLER LEVER |
|
 |
|
|
|
|
|
|
|
|
|
#033.2033& #033.2072...................$352.04
Nema 4 |
|
REVERSING DRUM SWITCH |
|
|
|
|
|
|
#032.103.......................................... |
$905.51
|
|
|
|
 |
|
|
|
|
|
|
|
|
"Fwd-Stop-Rev", Nema 1, for 1-1/2 HP at
115 volts or 2 HP at 230 volts single phase,
or 2 HP max. three phase |
|
|
|
|
|
 |
PROXIMITY SWITCH, INDUCTIVE,
(METAL SENSING) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
#032.210.........................................$217.67
115 Volt AC, two wire with ground, 30mm dia.,
10mm range
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
FOOT SWITCH WITH GUARD |
|
|
|
|
|
|
|
|
|
|
#032.211.........................................$257.68
24 Volt DC, two wire with ground, 30mm dia.,
10mm range |
|
#032.200........................................... $286.50
(Constant Pressure) "On-Off" type, Nema 1,
Pilot Control or 1 HP max. single phase. |
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
PHOTO EYE, ON-OFF TYPE |
 |
|
|
|
|
|
|
|
#EA-000005......................................$1,122.83
Banner Q45 Retro Reflective Photo Eye Kit
with timing module, reflector and mounting
brackets. Photo Eye output is one form C
type relay, Operating voltage
24-250VAC/12-250VDC |
|
POWER CORD AND PLUG (20') |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
POWER CORD WITH PLUG ONLY 20' LONG
|
|
Model No.
|
Voltage
|
HP Rating
|
Prices
|
|
EA-039-1A
|
115/1
|
1/2-3/4
|
|
|
EA-039-2A
|
115/1
|
1
|
|
|
EA-039-3A
|
115/1
|
1 1/2
|
|
|
EA-039-4A
|
230/1
|
1/2-1
|
|
|
EA-039-5A
|
230/1
|
1 1/2-2
|
|
|
EA-039-6A
|
208-230/3
|
1/2-2
|
|
|
EA-039-7A
|
460/3
|
1/2-2
|
|
|
|
|
POWER CORD WITH PLUG 20' LONG WITH MANUAL START SWITCH AND MOUNTING BRACKET
|
|
Model No.
|
Voltage
|
HP Rating
|
Prices
|
|
EA-039-1B
|
115/1
|
1/2-3/4
|
|
|
EA-039-2B
|
115/1
|
1
|
|
|
EA-039-3B
|
115/1
|
1 1/2
|
|
|
EA-039-4B
|
230/1
|
1/2-1
|
|
|
EA-039-5B
|
230/1
|
1 1/2-2
|
|
|
EA-039-6B
|
208-230/3
|
1/2-2
|
|
|
EA-039-7B
|
460/3
|
1/2-2
|
|
|
|
|
|
|
|
|
|
|
|
|
MOUNTING BRACKETS FOR PHOTO
EYE #033.2122 |
|
|
|
|
B-05165...........................................$125.19
|
|
|
|
|
|
|
|
|
|
|
|
 |
AIR PRESSURE SWITCH |
|
#094.191........................................$732.79
Nema 4 |
|
|
|
|
|
|
|
|
|
|
EMERG. STOP PULL CORD SWITCH |
|
|
|
|
|
#032.285 with 032.2851 Turnbuckle
...........................................................$737.85
Nema 4 |
|
|
|
|
|
"RED" EMERGENCY PULL CORD
CABLE AND MOUNTING HARDWARE |
|
|
|
|
|
#032.281...one side.................$7.88
per / ft.
both sides..............$16.83
per / ft. |
|
|
|
|
|
EMERGENCY PUSH BUTTON |
|
|
|
|
|
#032.284..........................................$296.39
Nema 4 |
|
|
|
|
|
|
|
|
PHOTO EYE, 18MM DIA., DIFFUSED,
(PHOTO PROX.) 115 VOLT, LIGHT
OPERATE, 2-METER CABLE |
|
|
|
|
|
#032.2113 (100mm range, 3.94")....$1,130.24
#032.2116 (200mm range, 7.87")....$205.79
#033.218 (400mm range, 15.74")....$311.09
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
NOTE: PRICING LISTED NOT MOUNTED
OR WIRED |
|
|
|
|
"PHOTO EYE, RETRO-REFLECTIVE,
(POLARIZED) 24 VOLT DC |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
#033.2128 with 032.21122 Cable.....$253.44
#032.21122 (Cable Only)...................$76.71
|
Click the button of the item you wish to purchase. Contact us for special lengths
|
CONTROLLER PRICES
|
|
|
|
|
AC VARIABLE SPEED CONTROLLER ONLY
|
|
SINGLE PHASE CONTROLLER INPUT
|
| Motor Size |
115 Volt |
208/230 Volt |
| 1/2 |
VSC-12-10 |
VSC-12-12 |
| Price |
$1,581.35
|
$1,260.73
|
| 1 |
VSC-12-11 |
VSC-12-13 |
| Price |
$1,827.73
|
|
| 2 |
N/A |
VSC-12-14
|
| Price |
~ |
|
|
THREE PHASE CONTROLLER INPUT
|
| Motor Size |
208/230 Volt |
460 Volt |
575 Volt |
| 1/2 |
VSC-01-15
|
VSC-01-18
|
VSC-12-29
|
| Price |
|
|
|
| 1 |
VSC-01-16
|
VSC-01-19
|
VSC-12-29
|
| Price |
|
|
|
| 2 |
VSC-01-17
|
VSC01--20
|
VSC-12-30
|
| Price |
|
|
|
|
|
REPLACEMENT INVERTER DUTY
ENERGY EFFICIENT MOTORS
|
|
| HP |
Part No. |
Price |
| 1/2 |
032.351 230/460 |
|
| 1 |
032.353 230/460 |
|
| 2 |
032.355 230/460 |
|
| 1/2 |
032.3512 575 |
|
| 1 |
032.3532 575 |
|
| 2 |
032.3552 575 |
|
|
|
|
|
|
|
IMPORTANT NOTES...
|
|
|
• All above motors are 230 / 460 / 575 Volt, 3 Phase.
• All above V/S Drive Kits include NEMA 1 / IP30
Junction Box, Controller and Motor.
• Good for cycle rates of up to 15 cycles per minute, at
1/2 second ramp time, with a maximum speed of 250
FPM.
• Drawing No. DG-001146. |
|
|
|
|
|
OPTIONAL: Mounting and Wiring Add-On . . .
(mounted close to the motor) |
$715.70
|
|
|
|
|
|
|
|
| Brake Relay Kit (EA-068A).............................. |
$575.24
|
|
|
• When AC Variable Speed Controller is used with a
Brake Motor, A Brake Relay Kit (EA-068A) is
required. Add an additional $575.24
for this option.) |
|
|
|
|
|
|
ELECTRONIC CLUTCH BRAKE DRIVE PACKAGE
|
| Part No. |
Description |
Price |
| EA-VSC-01-CB |
2 HP Electronic Clutch-Brake Kit |
$5,361.50
|
|
|
|
|
|
OPTIONAL: Mounting and Wiring Add-on .
(mounted close to the motor) |
$715.70
|
|
|
|
|
|
|
|
KIT INCLUDES
|
|
|
|
| Part No. |
Description |
| VSC-01-20 |
AC Variable Speed Controller, 460 Volt, 3 Phase |
| 032.345 |
2 HP 460 Volt, 3 Phase, C-Face Motor TEBC
(Blower Cooled) With 5AC Reducer and #60 Chain
and Sprockets |
|
|
|
|
|
IMPORTANT NOTES
|
|
• Good for cycle rates of up to 60 cycles per minute.
• 1/10 second Accel and Decel time, with 350 FPM
Maximum Speed.
• 230 or 460 Volt Only, Other Voltages, Contact us.
• Motor Cooling Blower is 115 Volt, 1 Phase, 60 Hz.
• Price Includes 5AC Reducer and #60 Chain and
Sprockets |
| Part No. |
Description |
| VSC-01-17 |
AC Variable Speed Controller, 230 Volt, 3 Phase |
| 032.345 |
2 HP 230 Volt, 3 Phase, C-Face Motor TEBC
(Blower Cooled) With 5AC Reducer and #60 Chain
and Sprockets |
|
|
|
|
|
Click the button of the item you wish to purchase. Contact us for special lengths
| • "Start-Stop" Push-button Station |
|
|
• "Start-Stop"Push-button Station |
| 033.1955 |
$223.91
|
|
|
|
033.195................................................. |
$151.10
|
| Remote mounted, Nema 1 |
|
|
|
To be mounted in Mag Starter Cover |
|
|
|
|
|
|
|
|
|
|
| • "Fwd-Rev-Stop" Push-button Station |
|
|
• "Fwd-Rev-Stop"Push Button Station |
| 033.1965 |
$420.87
|
|
|
|
033.196.................................................. |
$520.41
|
| Remote mounted, Nema 1 |
|
|
|
To be mounted in Mag Starter Cover |
|
|
|
|
|
|
|
|
|
|
| • "Up-Down-Stop" Push-button Station |
|
|
• Mounting Brackets for photo eye
|
| 033.1975 |
$420.87
|
|
|
| Remote mounted, Nema 1 |
|
|
|
|
|
|
|
|
|
|
|
#033.2122
B-05165 .............................................. |
$125.19
|
|
|
CONVEYOR WEIGHT TABLES
|
|
SIZE TO
ORDER
Overall Length
"A" 4" Dia.
Pulley
|
Bed
Length
"L"
|
Between Rail Wdith |
13" |
15" |
17" |
19" |
21" |
23" |
25" |
SIZE TO
ORDER
Overall Length
"A" 6"Dia.
Pulley
|
27" |
31" |
33" |
37" |
39" |
45" |
51" |
54" |
| Belt Width |
10" |
12" |
14" |
16" |
18" |
20" |
22" |
24" |
28" |
30" |
34" |
36" |
42" |
48" |
57" |
Overall Frame
Wdith |
16" |
18" |
20" |
22" |
24" |
26" |
28" |
30" |
34" |
36" |
40" |
42" |
48" |
54" |
60" |
| 12' |
10' |
Weights
(Lbs.)
|
561 |
593 |
625 |
657 |
689 |
721 |
753 |
12' |
791 |
865 |
940 |
1014 |
1088 |
1162 |
1237 |
1312 |
| 17' |
15' |
660 |
696 |
732 |
768 |
804 |
840 |
876 |
17' |
919 |
1002 |
1085 |
1167 |
1250 |
1333 |
1415 |
1497 |
| 22' |
20' |
760 |
800 |
840 |
880 |
920 |
960 |
1000 |
22' |
1047 |
1138 |
1230 |
1321 |
1412 |
1503 |
1594 |
1682 |
| 27' |
25' |
859 |
903 |
947 |
991 |
1035 |
1079 |
1123 |
27' |
1175 |
1275 |
1375 |
1474 |
1574 |
1673 |
1773 |
1867 |
| 32' |
30' |
959 |
1007 |
1054 |
1102 |
1150 |
1198 |
1246 |
32' |
1304 |
1412 |
1520 |
1627 |
1735 |
1844 |
1952 |
2052 |
| 37' |
35' |
1058 |
1110 |
1162 |
1214 |
1266 |
1317 |
1369 |
37' |
1432 |
1548 |
1665 |
1781 |
1897 |
2014 |
2130 |
2237 |
| 42' |
40' |
1158 |
1213 |
1269 |
1325 |
1381 |
1437 |
1492 |
42' |
1560 |
1685 |
1810 |
1934 |
2059 |
2184 |
2309 |
2422 |
| 47' |
45' |
1257 |
1317 |
1377 |
1436 |
1496 |
1556 |
1616 |
47' |
1688 |
1821 |
1955 |
2088 |
2221 |
2355 |
2488 |
2607 |
| 52' |
50' |
1357 |
1420 |
1484 |
1548 |
1612 |
1675 |
1739 |
52' |
1816 |
1958 |
2100 |
2241 |
2383 |
2525 |
2667 |
2792 |
| 57' |
55' |
1456 |
1524 |
1592 |
1659 |
1727 |
1794 |
1862 |
57' |
1944 |
2094 |
2245 |
2395 |
2545 |
2695 |
2845 |
2977 |
| 62' |
60' |
1556 |
1627 |
1699 |
1771 |
1842 |
1914 |
1985 |
62' |
2072 |
2231 |
2390 |
2548 |
2707 |
2865 |
3024 |
3162 |
| 67' |
65' |
1655 |
1731 |
1806 |
1882 |
1957 |
2033 |
2109 |
67' |
2200 |
2367 |
2535 |
2702 |
2869 |
3036 |
3203 |
3347 |
| 72' |
70' |
1755 |
1834 |
1914 |
1993 |
2073 |
2152 |
2232 |
72' |
2328 |
2504 |
2680 |
2855 |
3031 |
3206 |
3382 |
3532 |
| 77' |
75' |
1854 |
1938 |
2021 |
2105 |
2188 |
2272 |
2355 |
77' |
2456 |
2640 |
2825 |
3009 |
3193 |
3376 |
3560 |
3717 |
| 82' |
80' |
1954 |
2041 |
2129 |
2216 |
2303 |
2391 |
2478 |
82' |
2585 |
2777 |
2970 |
3162 |
3354 |
3547 |
3739 |
3902 |
| 87' |
85' |
2053 |
2145 |
2236 |
2327 |
2419 |
2510 |
2601 |
87' |
2713 |
2914 |
3115 |
3315 |
3516 |
3717 |
3918 |
4087 |
| 92' |
90' |
2153 |
2248 |
2343 |
2439 |
2534 |
2629 |
2725 |
92' |
2841 |
3050 |
3260 |
3469 |
3678 |
3887 |
4097 |
4272 |
| 97' |
95' |
2252 |
2352 |
2451 |
2550 |
2649 |
2749 |
2848 |
97' |
2969 |
3187 |
3405 |
3622 |
3840 |
4058 |
4275 |
4457 |
| 102' |
100' |
2352 |
2455 |
2558 |
2662 |
2765 |
2868 |
2971 |
102' |
3097 |
3323 |
3550 |
3776 |
4002 |
4228 |
4454 |
4642 |
|
| All weights are conveyor weights only. Accessories, crating, etc., are not included. |
|
Belt Conveyors, Conveyor, Conveyor Belt, Low Profile Conveyor, Roller Bed, Conveyors, and Slider Bed from your source for material
handling equipment.
|
|
Center Drive, Located on Left Hand Side of Conveyor